At 3:29 , this was so helpful, to see how you make the box sides the perfect length to match the circumference of the piece. The whole video was helpful. Thank you!
You, my good sir, are a MASTER. You make everything look very simple. It’s very deceptive!! Just making that turn on the corner is very masterful. It would break my needle just making the turn. Question: when using fabric, do you use piping material cut on the bias or straight?
this is a fantastic session, and i am one of the guys who always does it the first way. gonna change this. thankyou, never seen it done like this. thank you
Cheers. I've watched both channels and always see nice work. My limited work on a machine showed that to many stiches can be like perforated paper and easily tears apart. Example 5 is my choice to practice and knowing all of them is the way to learn.
Do you have any recommendations on sewing machine for someone who wants to do a few cars, and maybe some furniture, but not full time? I was looking at the Singer 4423 or Singer 4411. What do you recommend?
Great video! Just shows you, there is 'more than one way to skin a cat!" as the old saying goes. Thanks for the various techniques to do this, and thanks for keeping it simple for us newbies!
I've never seen that kind of pre-made piping for sale.. I've seen it on factory seats though. Where do you get it? What size is it? Usually when I buy pre-made piping, it's called "seascape" piping.
I have done upholstery for 36 years, you do a great job buddy 🇨🇦
Thank you. I really need this video. Can"t wait to practice after work.
Thank you , You are a great teacher
எனக்கு மிகவும் பிடித்திருந்தது இந்த காணொளியை பதிவிட்டதற்கு மிக்க நன்றி
At 3:29 , this was so helpful, to see how you make the box sides the perfect length to match the circumference of the piece. The whole video was helpful. Thank you!
Awesome teacher Thanks
Thank you for watching my videos
Once again thank you
These are great!! Thanks so much! So happy I found your channel.
Cheers!
Thanks so much your words are very encouraging 😆
You just saved me hours! Thank you for your expertise. Also this was strangely motivational, I'm hyped for jumping into the harder method now!
You, my good sir, are a MASTER. You make everything look very simple. It’s very deceptive!! Just making that turn on the corner is very masterful. It would break my needle just making the turn. Question: when using fabric, do you use piping material cut on the bias or straight?
Thanks for the encouragement n nice techniques.
this is a fantastic session, and i am one of the guys who always does it the first way. gonna change this. thankyou, never seen it done like this. thank you
Should I use heavy vinyl or light vinyl for boat seats?
Thank You.. Great Teacher..
Good tutorial
BRILLIANT many thanks for that , I always thought that No 1 was the ONLY way ! .
excellent - thank you
very nice.. thanks a lot.. watching from philippines
Cheers. I've watched both channels and always see nice work. My limited work on a machine showed that to many stiches can be like perforated paper and easily tears apart. Example 5 is my choice to practice and knowing all of them is the way to learn.
very nice, thank you. camera work is perfet
great tutorial! thank you! what size piping did you use for example #1?
Fantastic!!
i prefer the first way more control . crisper corner. and easier on my hands after decades. charge enough to not do it factory style all in one etc.
Brilliant!
You make 2,3,4 & 5 look so easy. You must have sewn thousands of meters of piped seams.
You are Great!!! Thx so much ❤👍🏻
What sewing machine are you using in the video? Thanks for the tutorial
My sewing machine is a conswe 226
Do you have any recommendations on sewing machine for someone who wants to do a few cars, and maybe some furniture, but not full time? I was looking at the Singer 4423 or Singer 4411. What do you recommend?
Not recommending a machine , but get one that has half an inch foot clearance ( height ) and can do three stitches to the inch .
thank you
Hi there. If the pipping presser foot is size 8mm, what size cord should I use for sofas, please? Thanks.
do you think that will work for production throw pillows ?? let me know
Nice one❤
Tendrías que poner como título con que tipo de máquina.
May I ask ... Why do you use plastic to cover endings in example 3?
Can't wait to try number 4. Do I need to change thread weight or is it all good?
You don't have to change that thread weigh exact if it a customer asks for something thickness
Cual es el nombre del canal en español?
5:00 Yesssss finally been looking for days this method (#2?) Is there a name for this?
Buenas noches.....que tipo de pie es....cómo se pide a la hora de comprarlo
Great video! Just shows you, there is 'more than one way to skin a cat!" as the old saying goes. Thanks for the various techniques to do this, and thanks for keeping it simple for us newbies!
Do you have any DVDs or tutorials for sale?
I've never seen that kind of pre-made piping for sale.. I've seen it on factory seats though. Where do you get it? What size is it? Usually when I buy pre-made piping, it's called "seascape" piping.
What do you call that piping tubbing?
It's usually called welt or welting.
,🙏🙏
Podría traducirlo a la hora que habla
👍👍👍
Thank You