Really good tutorial. I don't know why but other tutorials miss crucial steps. This is saving hundreds of hours of frustrations by going through this tutorial and I understand how and why you do each step so it is not blind rote learning.
Hey man thanks for the course, really really nice, for those watching you can put the speed to 1.75x and it's still very clear, just if you wanna save some time.
Sir After selecting "Center, Diameter" for circle when dragging on the line (as shown in video) it doesn't show midpoint, instead endpoints are highlighted on both lines (vertical & horizontal lines). On right clicking and selecting midpoint, it does show midpoint on both lines but, both lines midpoints are not intersected with dotted line to show center of the circle. What to do? I use AutoCad LT 2020 thanks
Sir the angles from the horizontal lines are not tracing in my PC so the whole drawing is getting another dimensions what should I do can you please tell . I also wanted to know how the tracing scale for lines and angles are showing.
Bro how to pan screan mean how to drag down drawing while dragging the cursor sign makes a sign of hand tell me how to drag ...... i was actually questioning about that
@@CADCAMTutorials could you please explain more? I'm a bit poor at solving problems related to mathematic and geometry maybe that's why i can't understand. For example,you wrote 45 degree in one side. But in the other side you wrote 90+45=135. Why?
Have you used geometry protector? It is the same. Angle measurement starts from right side i.e. zero degrees and increases towards left. Therefore if you want to go in 45 degrees in left side you will have to add it to 90 to workout total angle.
Actually,if I'm not mistaken i got it. So,the letf side of the right will be decrease,and as well as the right side of the left. But the left side of the life and the right side of right will be increase.
THANK YOU SO MUCH. I feel so lucky and grateful to subscribed to your channel.
Really good tutorial. I don't know why but other tutorials miss crucial steps. This is saving hundreds of hours of frustrations by going through this tutorial and I understand how and why you do each step so it is not blind rote learning.
Tracking 03:07
Circle centre track 04:26 05:15
Parallel snap 09:18
Shift+ right click to see list of tangents.
Giga chad
Hli
Feel like just wasted 5000 rs on auto cad class ,on UA-cam teaching method is too much good i like way of teaching
Glad you're finding the tutorials helpful!
Thank you very very much
After 30 years gap I again getting very nice explaination
Thankx ones again
You're welcome 😊
Video is very helpful for beginners... explanation in very crystal cut form❤
1min in and its already better than my teacher ffs
Thank you 😊
True ❤
Thank you Engineer really is helpful and super simple
let me thank once again your lecture is super presentation I have ever come across
Hey man thanks for the course, really really nice, for those watching you can put the speed to 1.75x and it's still very clear, just if you wanna save some time.
Thank you very much indeed!
I really appreciate how you explaining the lesson!
thanks for the info really helped alot. i rather learn about tNice tutorials than school
Excellent explanation....easy to understand....thank you
thanks brother it helps me a lot
You're welcome 😊
thank you so much for the tuitorial sir... nice and easily explained... heartly thankful
You're welcome 😊
I just created my own drawing so proud of me, thank you, this really helped me ❤❤❤❤
Great job!
PEACE BE ON YOU. WELL DONE BRO. KEEP IT UP.
Thank you 😊
Yey. Im re learning this autocad this lockdown. Thank you!!!!
Easy to understand. Thank you!
You're welcome 😊
Very Good Method of teaching . . . Thank you for this video Best of luck
You're welcome 😊
Best one dude ...keep rocking
This video derserves more likes.
Thank you 😊. It means a lot.
Thank you for such awesome videos and excerises
You're welcome 😊
Very nice , congratulation Bro
Thanks a lot
Thanks for make it easy for beginners
You're welcome 😊
Dhanyawad guruji 🙏
You're welcome 😊
Hi teacher ! Thank you for your videos sharing it's amazing knowledge as my channel in Cambodia
You're welcome 😊
AWESOME! This is very helpful!!
How to use parallel line and extension line, great demonstration for complex part
ua-cam.com/video/2ni0AWbloQA/v-deo.html
Thanks for the tutorials, I am learning a lot
Thankyou for this guide I really appreciate it
You're welcome 😊
Thanks for this great video
Amazing
I'm glad you think so!
Awesome 👍🏻
Thank you 😊
Thank a lot sir 💚
My hero
you a gift from God by creating lectures. How do get in conduct with u for further consultation, including MATLAB?
Excellent explanation. Thank you Sir
thanks for this beautiful presentaion.
Best teaching
thnk you man actually i have that problem of making sure of the midpoint in first draw
did you got a solution for this problem
ua-cam.com/video/8OMcjIGHdFg/v-deo.html
Best class
Sir After selecting "Center, Diameter" for circle when dragging on the line (as shown in video) it doesn't show midpoint, instead endpoints are highlighted on both lines (vertical & horizontal lines).
On right clicking and selecting midpoint, it does show midpoint on both lines
but, both lines midpoints are not intersected with dotted line to show center of the circle.
What to do?
I use AutoCad LT 2020
thanks
Make setting as per this video
ua-cam.com/video/8OMcjIGHdFg/v-deo.html
It worked
Nice Sir 👍
Good ticher
Thanks
Thank you so much sir
Thank you sir :)
Thank you 😊 🙏
awesome video. thank you
You're welcome 😊
Great
in 5:21 how did you give the circle a height of 80? i cant do it
Track mid point and specify distance of 80
thanks 🙏🏻
lovely, really beneficiary, urs is very easy method of teaching and i got good knowledge
thank you
You're welcome 😊
Sir which type of software laptop used for autocad program please tell me which generation laptop need to learn autocad
super good
At 1.40. What do you press to enter the length? Also what do you press if you want millimeters?
In the last drawing, the two lower tangents intersect with each other.
Sir i am unable to point centre in the right corner square to form circle
To make the new drawing you have said to click on plus button how to bring that tool bar. Drawing 1 , drawing 2 , drawing 3
What is your AutoCAD version
Very helpful
What is the difference between diffrent auto cad versions like 2020,2014 etc??
Are u legend
Can you make a video on how to find constraints and use locking dimensions in the Parametric menu.
ua-cam.com/video/9VXf5sOVbEU/v-deo.html
What is going to press to specify the angle after putting 135?
TAB
In Circle drawing i am not getting the centre point automatically like yours am using 2018 autocad can u solve that problem.
Same logic for center point: ua-cam.com/video/d6n8H6PzzGI/v-deo.html
No i got it in snap settings.
And nice class sir thanks for ur efforts
You're welcome 😊
How to set a limits for civil engineering drawing and what type of units i have to take...for that
ua-cam.com/video/mqZBfuItwII/v-deo.html
Where is the previous video. There is no link
thank u sir
when i change from model to layout the image is very faint on white background what should i do to make it visible darker?
How about for printing this into paper? will i get the actual measurements?? Thank you!
Yes.
@@CADCAMTutorials Thanks bro. I am studying AutoCAD again. Your uploads are great.
Im using the free version to learn and most of these additional shape features doesnt come with that version
Sir when I am press TAB button it takes ok/enter in that what can I do
Hello sir , in 2nd drawing the angle can be shown is automatically , what to do to see that angle?
Make polar tracking ON:
ua-cam.com/video/IU7agZtYRnk/v-deo.html
Would you make a tutorial for drawing "Mobile housing" using autocad inventor ?
Very nice tutorial... Sir, where can we download the exercise files?
Why mid point showing for me. When i put pointer on there
ua-cam.com/video/d6n8H6PzzGI/v-deo.html
@@CADCAMTutorials thanks
Circle is not able to locate the midpoint? Why
ua-cam.com/video/d6n8H6PzzGI/v-deo.html
❤❤❤
Is dis teaching for mechanical students.. please reply if yes den I wanna start dis course..
Yes.
I have autocad 2013 and m not getting that tab option while selecting the angle, vry difficult for angle selection
ua-cam.com/video/SPmNP8q47JM/v-deo.html
Gud evening sir . I want to asked about AutoCAD . May you help me sir ?
Sir the centre point is not tracking at all in my pc 2016 version autocad
Check the tangent lines under the big circle. Its incorrectly done
can u tell me what kind of configaration pc we need nto run this softwear
Core i5 8 th/ i3 10th gen or above
8gb ram
Ssd as system drive. That will run fine i guess.
I’d love to learn this program but the cost is ridiculous unfortunately
Who pays for it? We all download it for free!
@ fusion 360
Sir the angles from the horizontal lines are not tracing in my PC so the whole drawing is getting another dimensions what should I do can you please tell . I also wanted to know how the tracing scale for lines and angles are showing.
ua-cam.com/video/SPmNP8q47JM/v-deo.html
Hi
Sir i can not open tamplets please give solution for that
Bro how to pan screan mean how to drag down drawing while dragging the cursor sign makes a sign of hand tell me how to drag ...... i was actually questioning about that
Press middle mouse button and drag the mouse
@@CADCAMTutorials middle.......?
Scroll on mouse
@@CADCAMTutorials laptop dont have midlle button guide me about laptop's mouse
@@WaqasAhmed-th4lo You have to type P followed by enter. The cursor will changed to the hand. You can pan the screen. Actually the P means the PAN.
Pls make tutorials on Solar Photovoltaic cell design in Autocad
DRAWINGS PDF MUST BE ATTACHED IT BECOMES EASY TO UNDERSTAND
Does anyone know how to do tangent line between two circles for AUTOCAD 2021
At 30 secs what is the word he is saying?
Hey bro, I really would like you to reply to me because it's so important. I didn't get why did you wrote either 135 or 45 or nothing as degree
@@CADCAMTutorials could you please explain more? I'm a bit poor at solving problems related to mathematic and geometry maybe that's why i can't understand. For example,you wrote 45 degree in one side. But in the other side you wrote 90+45=135. Why?
Have you used geometry protector? It is the same. Angle measurement starts from right side i.e. zero degrees and increases towards left. Therefore if you want to go in 45 degrees in left side you will have to add it to 90 to workout total angle.
@@CADCAMTutorials didn't you mix right and left?I mean the left side you mentioned is right to me
Actually,if I'm not mistaken i got it. So,the letf side of the right will be decrease,and as well as the right side of the left. But the left side of the life and the right side of right will be increase.
Midpoint kaha se laye bhai?
ua-cam.com/video/AfIOanr2gaY/v-deo.html
@@CADCAMTutorials wow!thank you
sir my midpoint is not getting tracked
i am not able to select two midpoints at once
press F11 with F3 to get reference lines
Why my 100mm is showing larger but not your ?
Use acadiso.dwt template
@@CADCAMTutorials in 2007 how to use
Same problem with me
Use acadiso.dwt template and don't use acad.dwt template
Sir give the diagram download links please,it helps for me to practice
where is the link to the drawings dude?
Sir... mid point is not getting highlited for a line sir!!
Make midpoint object snap ON.
@@CADCAMTutorials thank you sir
How to down load this software on my computer