AutocAD 2D Practice Drawing / Exercise 6 / Crane Hook /Basic & Advance Tutorial
Вставка
- Опубліковано 4 жов 2024
- Welcome To A_CAD Tutorials
I am Anket Kamtekar
In this video I show the 2D basic Exercise Of Autocad for Beginners
AutocAD 2D Practice Drawing / Exercise 4 / Basic & Advance Tutorial
• AutocAD 2D Practice Dr...
AutocAD 2D Practice Drawing / Exercise 3 / Basic & Advance Tutorial
• AutocAD 2D Practice Dr...
AutocAD 2D Practice Drawing / Exercise 2 / Basic & Advance Tutorial
• AutocAD 2D Practice Dr...
AutocAD 2D Practice Drawing / Exercise 1 / Basic & Advance Tutorial
• AutocAD 2D Practice Dr...
i.imgur.com/WU...
i.imgur.com/uE...
i.imgur.com/Ve...
i.imgur.com/Sr...
i.imgur.com/X4...
i.imgur.com/QR...
"Just Check Out this Video"
Give Me Any Suggestions About This Video & If You Have Any Problem About Autocad Plz Write in Comment Box of video As soon As Possible I will Response this.....
Don't Forget To Subscribe My Channel
/ anketkamtekar
Like & Share
Thank You ..
#AutocAD_2D_Practice_Drawing
#Crane_Hook
#Basic_&_Advance_Tutorial
Thank you ! It helped me a lot to understand how the basics of the software work ❤
Thank you!!! Your explanation really helped me understand the basics of the AutoCAD
wow so good, basic and straightforward. perfect required information and to the point. thankyou!
the best Audtocad teacher ever . nice
Great video. Looks more difficult than it is until you know what to use. Anyway, I am interested to know who or how does any engineer decide or what determines that, that bit will be R35, R30, R38 etc etc etc. What if I make it R34.5, R27.5, R29 etc etc etc. Or are these standard measurements.
ua-cam.com/video/K44M-dLsFME/v-deo.html
learn skill and earn money
NO Blah blah blah talk, you did a great job.
Good work ... I wanted to see how you did your dimensioning particularly where you put 2x45 degree .. thank you I enjoyed
ua-cam.com/video/K44M-dLsFME/v-deo.html
learn skill and earn money
for line : tab to choose the angle
Ektremly talent, fast, simple,
Thank you bro
thank you so much 🎉
Bangladesh 🇧🇩 From
Thank You very much ❤❤ i learning a lot from this vidio
This video clip was an eye opener. Thank you so much🙏
مهندسنا اعظم منك🫡
THat was cool, learned a good bit. Thanks
ua-cam.com/video/K44M-dLsFME/v-deo.html
learn skill and earn money
Super and clearly understandable ❤️
Very informative
u teached me more than more teacher did
Great Video Ankit..will you conduct Online class for beginner..
Yes, definitely
Your Best
Excellently done, wow
👍👍👍👍👍
Thank you for your explanation
Excellent work
great. all the best
super, thank you.
At 7:35 I see you put distance 35 but the drawing shows the distance is 32.
Super vedio bro
Beautiful
hi anket,what should be the next exercise after this?
See all play list..keep in touch for more practice drawing.. Thank you for response
Wounderfull.
👌👌
👍👍
Most helpful for me........
Brother one doubt! How to take the total length of various arc lines
Superb👌
U make it very simple but I'm beginner I forget all command when I work what can I do.
Keep practice for all command with help of this type tutorials
Checkout my video on knuckle joint maybe u will understand it !
NICE EXPLANATION
Very good bro 👏🏻👏🏻.... keep going
ua-cam.com/video/K44M-dLsFME/v-deo.html
learn skill and earn money
do you ever produce these projects in the LT version?
ua-cam.com/video/K44M-dLsFME/v-deo.html
learn skill and earn money
sotis when the sample finishes playing it will play over itself and you get tNice tutorials echo effect.
Good 👍👍
ua-cam.com/video/K44M-dLsFME/v-deo.html
learn skill and earn money
how do u mirror the perfect placement in 1:10 , I don't seem to have the indicated triangle to place my mirror in, and it only allows me to place the mirror on the edge of each line, not in the middle of the line
Thats means your mid snap is off..
Go to Drafting setting .. command DS
Object snap tab .
Select all snap ..
Apply and ok
@@anketkamtekar ohh , i'll try it later, thank you so muchh!
Ok
@@anketkamtekar hello, in 7:35 , why did u insert 35? while in the drawing it says 32
@@akunsyg7960
Yes... Only you detect this mistake..
Dear respected sir my name is dadi dileep iam from india Andhra Pradesh,
Actually iam ITI satisfied fitter/fabricator good knowledge pipeing isometric drawing and structural drawing and structural drawing ,
You are videos was very use full we required this video s,
I would like to learn "Auto cad drafting "can I take a class from you please sir, I will pay for money you are class
yes .. Online classes are available
@@anketkamtekar ohh really
@DADI DELEPE
9850521466 whsapp me
@@anketkamtekar dear sir when we will start the class sir
@@anketkamtekar okay thank you sir
i got it......where can i download more practice drawing images ? why dont you share on your facebook page ? if you are okay with it........or if u share somewhere else, plz provide a link......thank you!!
thank you very much for this video
Thank you
What units have you set up there ??
MM
Great Video !!!
Would be more simple to folow if you wouldve talked
Sure...i am try with speech...
Thanks for Suggestion..
Sir pls make for modlur kitchen
Plan and elevation
lovely bro
Very nice...
Sir please add your voice instead of music
Awesome...
Sir can we get advanced level hard example s for 2d please
Sure you can find out diagram from internet for 2d practice ..
I am aslo working on this 2d practice diagrams basic to advanced
@@anketkamtekar auto cad 2d for tower
How were you able to determine that second move, there’s nothing I see that indicates it’s 2 units down...
There is dimension 2x45°
Distance is 2 unit and chamfer angle is 45°
Where can I download this drawing for practice?
Rohit Patel
Check the description box ...i provide link of drawing image file
m.ua-cam.com/video/cVSqJ0eDRgA/v-deo.html&index=2&list=LL24prhgMf2mfj2GNkky3IBQ
you can simply use the fillet command , it will be very easy and much fast to draw
its hectic to select tangents every time
When you try to select tangent snap ..so type TAN ..
Then you only find tangent point
@@pratyugna qqq
verbal communication with command reqd. remove the back round music start to speak which command u r using and who it is used
Why you don't use the fillet command
ua-cam.com/video/K44M-dLsFME/v-deo.html
learn skill and earn money
Nice bro
Please help! My dimensions are showing in the thousands: 1000.344, however yours is in tens: 16, 16.3..
How can I change this? Please
Change the units from unit command.
Sir command name to make pollar array in only arc segment not clear please give suggession
Related this video??
Are you freelance designer or just tutorials
Diminision also explain please
Hi friend one doubt can you explain why you make rectangle set length as 10
This is 2:24 ??
AMAZING
please upload creo practice drawing also bro
ua-cam.com/video/K44M-dLsFME/v-deo.html
learn skill and earn money
Thanks sir aap shortcuts commands send kr do Sir plz
can u make 3d in this diagram!
Yes..its easy to make with Solidworks..
@@anketkamtekar tnx 😍
where is the dimentioning part
You can do it by yourself . It's the easiest
Itu menggunakan Autocad yang taun berapa kak
its 2017 vesrion
Ye software konsa use krty ho ye b btaya kry
AutoCAD
is there no other way other than Auto card
Bolanle Oloruntola
Did you mean Auto CaD
can you tell me the name of background music?
Gotta find out
@@anketkamtekar sure
You have autocad tutorial .
Need the pdf link please
People wants hear your voice not music
i tried to do it and gave myself 40%
What is the app name...??
AutoCAD
يارب هندسه بترول
No need to show R30 on this drawing. It's redundant.
👍
Video bol k banaya karo g
R7 not understand
App Hindi mi aavag do
Sure..i am working on it
thanks🪴
useless without audio
Please speak otherwise no use for video
this one is kinda hard
Good👍