Nice video. I added the same key but after a few hours the remote stopped working. Car still starts but no remote function. You ever run into that issue?
Is it safe to do so? If so, what thinner do you use. I am doing this for the 2nd. Was not able to read the chip the first time. A friend suggested to use an emery board
No, it's not possible on a pristine factory FEM! But if this unlocking procedure was performed once, then you no longer need to remove it! Everything is done through OBD.
Hi there, can you tell me if it's 12v you are applying at 26:20? I have the same setup, but don't know where the red alligator clip is coming from. Many thanks
Спасибо, больше мучений снимать все на видео не теряя кадр и при этом еще и работать.
Buen video amigo... pregunta! Es el mismo procedimiento para la X6 Año 2016 ?????
Dang!! Butter fingers.
I tried it / worked easily thank you
Nice video. I added the same key but after a few hours the remote stopped working. Car still starts but no remote function. You ever run into that issue?
Yes never success at one time
Please check my new video
You may need a new key
Thank you so much for your help
i wander ,how it is connected j2534 box to ? via bluetooth?
Mazing job, i do that with another tools like vvdi
Same process?
next time clean the eeprom with thinners....nice video
Is it safe to do so? If so, what thinner do you use. I am doing this for the 2nd. Was not able to read the chip the first time. A friend suggested to use an emery board
In Cas module you can see the key cutting code but where do you get the code in FEM/Cas 4+?
no KEY CODE in FEM/CAS4+
Thanks for video .
if a working key is present, can a used one off of ebay be bought and programmed to have as a spare, or does it have to be 'virgin'? thx
Thanks brother nice video👍👍
Nice job my frend !
Good job brother
You can use emery board from wife to clean chip
good evening, Can you help me with the diagram to connect the red cable to the FEM platform ... thanks
it's just 12v
hi thanks for sharing very good video but what year is the x5 will this procedure work on 2019 BMW x5 G series
There is no aftermarket programming for all bmw G series
where are programming instructions !?
Hi can you do this with the IM508 please. Thanks
Can this be done via OBD without dissassembling the fem?
No, it's not possible on a pristine factory FEM! But if this unlocking procedure was performed once, then you no longer need to remove it! Everything is done through OBD.
Top, show 🎉
What's the black toll connected to the G-box? 🙏 thanks
it is a Module Testing Platform, it has to simulate a connection to a car
you can buy it on Aliexpress nl.aliexpress.com/wholesale?catId=0&initiative_id=SB_20201230163541&SearchText=bmw+ecu+tester
What’s the black mod called you adapted to the gbox? I checked the link Nobel posted but had no luck
Very helpful thank you brother
Can i do all keys lost with just the fem module?
Gbox, xp400 etc
all key lost is different story , need to collect ecu data
@@highrdmotors5712 so i need the ecu too to read the isn number, and then use what to programme a new key, xp400 only?
Hi there, can you tell me if it's 12v you are applying at 26:20? I have the same setup, but don't know where the red alligator clip is coming from. Many thanks
From g box 2
Hello, was that dealer key you added, or aftermarket generated from key tool max?
hey its aftermarket ket
thank you for video.perfect!!!! are you Korean?^^;;
How come the gbox 2 was used? Iv seen some do it without it? Does it speed up the process?
No it just for 12v supply, you don’t have to use it
is it an Autel IM608 or a 608 PRO? thank you
Does it have to be a brand new key ????
Yes can’t reuse it
How do you connect things with an autel im508?Which doesn't have the j2534?are you using the j2534 here??
If I’m correct IM508 doesn’t need the J tool
How much do you charge for this? Retail public job? Wholesale customer?
$350 THANKS
VERY PROFY
Hi bro all key lost or add key
Added
Nice video but why use the g box
Hi just needed dc power
ua-cam.com/video/WK7nSBxZDCQ/v-deo.html 이곳에서 선생님의 영상을 사용하고있네요.
what the shit going on in here hihihi u break my Car hahaha holy ghost hihi
Is there a way to do this with all keys lost?
All lost key , need ISN number from ecu
@@highrdmotors5712 how do you get the isn number? Need to pull the ecu as well?
🙄