How To Master Your Beats With Stock FL Studio Plug-ins
Вставка
- Опубліковано 7 жов 2022
- The Centerfold Drum Kit 🏆 bit.ly/3aztu61
🏡 Join the Treehouse, Learn privately from me, get this videos' FLP, and much more ➡️ www.dopecontentonly.net/chust...
Free 4TEEN Drum Kit ⏩ bit.ly/Chu4TEEN
Follow me on Instagram 👉 bit.ly/ChuIG
🛸 Listen to my beats on Spotify 👉 spoti.fi/2HFnYOF
Join the Treehouse ➡️ bit.ly/3PORwcO
1 month Beatstars free (use code PRODBYCHU)➡️ bit.ly/3EoBnpG
Get 7% off DistroKid ⏩ bit.ly/3x0lOCz
Main Channel, Chu ⏩ bit.ly/2N6ci6q
Second Channel, Chu Uncut ⏩ bit.ly/3BT8qR5
Third Channel, Chibuzor ⏩ bit.ly/3PYokQs
Fourth Channel, Chu, Maven Del Morte ⏩ / @dopecontentonly
Chu
Chu Beats
Todd Grey
Thanks for watching, follow me one TikTok for more free gems🙏 bit.ly/3FTBs7D . 👉 The Centerfold Drum Kit 🏆 bit.ly/3aztu61 .
Why do you not set the soft clipper to the specific track? I imagine each mix has a slightly different output level so just turning it to -2.5 or whatever will give a different result each time
@@devs1980 I think it's an average estimate. That being said, it's up to us how we adjust it.
need a sample of your beat on UA-cam
Could I apply this to individual instruments and vocals during mixing?
I wouldn't
Bro just fixed my entire problem with mixing in a short 💀
👑 you dropped this my guy
🙏🤝
0:01
0:1
💪💪💪💪
🙏
Dear young producers... there are no Rules in mixing mastering. U just make it sound good TO YOU and ur good. Because remember that We Are Our Own Worst CRITIC.
Tru
Def needed this
Glad I could help homie 🙏🙏
Just came to check in and leave this comment to say, this has been my go to formula and I continue to use it. Thanks Chu
My pleasure homie. And thank you for going thru the effort to come back just to say that. I appreciate your support. Blessings to you 🙏🤝
Super cool
sauce
thanks bro
Doesn’t this not make it more quiet?
🍅
0:00
The mastering also depends on the mix and is therefore individual for each song
thanks for watching and commenting, check out some more content here! ua-cam.com/play/PL-id8RoSAFp2DFb5wXS7bpF6lwlaDs14o.html
Thank you sir! Keep it up!
What’s the diff between using patcher and just using the mixer for those plug ins???
wow first time in a while a tutorial that actually worked thanks man
Lowpassing your master is scrub
thanks for watching and commenting, check out some more content here! ua-cam.com/play/PL-id8RoSAFp2DFb5wXS7bpF6lwlaDs14o.html
Bro he said slightly more ass I’m at work in the bathroom and I instantly started crying laughing in the stall 😭😭
Last step I use Maxiums - it's a much better limiter!
Good step by step though!
Can i master a song with this too?, not only beat right?
Very helpful!
I've been struggling to get a loud master, and this fixed it.
whats the song in the background called?
GOOOOOOOD !!!
I have a cuestión where you add the peacher . add you on the Chanel rack on in the mixer side
Can i just add these plugins on the master channel ? Or do you have to patch it together like you did in this vid ? Many thanks
you can add them to the master and do it that way. In my opinion it's less complicated and serves the same purpose.
Dude this is amazing. I use Ozone, but you can do the SAME THING with FL stock plug-ins. That's awesome. Keep making videos man!!!
Does this mastering tutorial with FL Studio stock plugins only work with dance music?
what do I do once I hear the damn crunch lol
thanks for the views and your comment, go here to learn more about mixing ua-cam.com/video/T9jvf2emcP4/v-deo.html
He’s right 25hz is a real stinky frequency hahaha
does anybody kno wht turning off the noise gate knobs do?
Just put God Particle on the master channel
🙏
Wish there was a better way to save shorts
Same tbh, it I heard they are working on it
Merci beaucoup thanks you very much for this tutorial Big up from France
My pleasure, thank you so much for your support!
😂😂
🙏
So I used fl and I love that limiter plugin but I’m in Ableton now and is there a plugin that has kinda this same set up with the visuals too?
The stock limiter? It's perfect as it is, you don't need that fancy stuff.
tysm mann
My pleasure homie
UA-cam needs dudes like you💪🏽💪🏽 keep it up bro, this helped me so much
Glad I could help!!
Hey Chu, i got a question, when artist hops on your beat, is it better if he just hops on mixed beat and master it with vocals after or to master the beat and then vocals separately ?
Good question, I need an answer to this too
Bro giving clipper settings as if the numbers are universal smh
lmao
The high-pass is killing your phase, dont do that. Just pass your mix to a mastering engineer.
yes
Supper
Crunch? What does that mean?
Pro tip: Dont. Get the fab-filter bundle
On md it’s way easier
yessssssssssssssssssssss
Fruity limiter gives AIDS
“Slightly more ass” 😂😂😂😂
Is this what you do with every beat regardless of genre ... surely not
Honestly the only thing I'd recommend from this video is the 20hz cut.
@@prod.hallow only do that if the eq has a linear phase mode, otherwise you might be fucking up the low-end of your mix
Mixing might be the hardest part but with practice improvements come
Mastering is def harder because it has more rules. Mixing is more of the creative side of things.
While the super low sub isn't needed usually, if you make hard dance or techno you might wanna not do that
Obv don't have your sub clipping
@@yuxanne. I would always recommend 20 hurts or more on every genre and mix
Forgot to set the EQ in linear phase mode
It doesn't show LIN because he didn't click the arrow that shows the option. It could be enabled
Please someone like my comment so that I can see this video after
pointless to do a 20hz cut on your Master track...bad advice. learn how to mix
🙏
like my comment pls
What is….”crunch”?
😮😮😮
Why the eq looks different on video after You talked about it ?
straight uninformative
yess
personally
Not sure what he means by a chain. Why not just put all these on your master channel.
Dot
Thank you so much this has helped a ton 🙏🏻
What are you talking about mate? I love ass.
I'm lost 🙄
Personally I wouldn’t use fruity limiter as it squashes transients honestly Maximus is way better for that same purpose
Finally someone said it. Saturation brings some of those back in the limiter, but honestly the best way to go is a maximizer.
👍
this why ur beats sound ass.. all that shit isnt necessary use good sounds and throw on a soft clipper and thats it all that extra shit is unnecessary 😊
Note from an engineer not mastered your beats
*dont
At what volume should i be exporting it then for youtube unmaster
Why patcher?
It let me buildout the chain as a console, sort of like Ozone
@@ChuTheCreator ahhhhhh interesting
I tried this and it was damn near similar to my main mastering chain. But it's less plugins. Overall this was a dope quick tip.
Make sure your cutting below 25Hz and not just bringing it down to make sure nothing gets through
Playboy vallah
yesssssssssssss
This knowledge is not only for beats, it is actually helpfull for other genres! thx!
This shit a 💎 🔥
is patcher on the master?
ayoo thx
This dude got no idea what he’s talking about
thanks for watching tho
@@joeproyaknow Exactly lol Chu's beats always sound amazing when it comes to his mixes
@@joeproyaknow the leveling in the mix is good but there's a lot of resonances in his mixes and they sound boxy as well
I guess I’m a bit confused as to why you’re using patcher for this? I get that saves effects slots on the channel but outside of that ur not doing any sort of complex routing or do u do this just save it as a patcher preset? It’s good to see someone on here who’s not slamming their soft clippers and limiters for once because loudness comes from the mix. Keep up the good work
I just like doing it that way. and thanks man
Is Fl Studio Fruity supposed to have demo plug-ins such as sytrus and harmor? For $100 seems like the only difference between the free demo and Fruity is the ability to save projects.
DIS NOGHA USES PATCHER 😭😭😭😭😭😭😭😭
thanks for watching doe
@@ChuTheCreator ofc g love ur channel I just thought it was hilarious
Patcher actually kind of a cheat code for bootleg versions of expensive plug-ins
@@prod.hallow I actually just had to use it on a track so that I could have a mixer track bypass the master 🤦♂️ humbled
patcher is genuinely the best thing about FL and the only reason I'd ever consider switching back to it. The sound design capabilities it has are damn near limitless
This is sacred knowledge right here dude
Facts, your mix has to sound crisp though 👁️👁️
💯
Do u do this with all your beats or the majority of them? I gotta look at Patcher cuz idk how to use it tho.
It has a bunch of cool presets. It’s a really fun plugin.
The thing ab cutting frequencies under 25hz isn’t true, humans literally cannot hear those frequencies and it doesn’t matter whether you eq them or not
but speakers can output them. Speakers can only output so many frequencies and that's why it matters.
Lowkey though when I mess around with cutting around 30 it always slightly changes the sound of the 808 sample. Sometimes it sounds worse when cut
@@Imnotbink Could be the eq also slightly cutting hearable frequencies
@@ChuTheCreator That’s not true lmfao
@@Imnotbink it might because your eq isn’t set to linear phase
I use Parametric EQ 2 in FL and on the bottom of the plugin there’s a button that says “LIN”. I turn this on usually for any instrument thats focused on the sub region as to prevent phasing.
“slightly more ass” 😂 thank you
Lmfao that hit different. Just a smidge, A tad more ass 😅
Thought it was funny too 😂😂
Lol
😂
🤣🤣🤣🤣🤣🤣🔥
I tell you one thing with the patcher with kick and any low sounds
Make a normal line , nothing in that
And another line with eq , cut all up to 500 ,
make 2 line ,
one take in a multiband with the preset noisy neighbors
The other with maximus with preset trasparent
Unite it in fruit chorus an take the preset fat clean
Put off lfo and increase depth to 3 ms put stereo to 90 or 60
And make a line to output
With chorus and maximus
Adjust volume of that 3 line
Yeah but you can save it in parcher
What does threshold do?
All the signal that goes over the threshold will be effected by the clipper in this case. Works the same for ever plugin that have a threshold like a compressor or a gate.
Example:
If you have a sound that peak at 1dB and your threshold is at 0dB only the sound over 0db will be effected by the plugin.
Will not do anything with the sound below 0db 😘
Thanks Chu!
Individually cut out subs bruv
Huh... you always want 20 or more hertz cut from your master
Doesn't seem like you know what you're doing there
and you do?? with your 225 subscribers??? yes, teach us, sensei. lmfaooooooo
@@ChuTheCreator I don't make youtube content man. I will teach you if you want tho
@@ChuTheCreator how to lose all respect as a creator and display immaturity and insecurity in 12 words... And you *do* seem to be clueless
@@ChuTheCreator he's got a point, you are quite literally squashing your mix, and making it boxy. I'd suggest using a maximizer as it keeps the transient when it hits the threshold, also you can see your peak RMS and LUFS. You wanna be at -14 as that's industry standard atm
@@ChuTheCreator clowning on people based on sub-count is seriously pathetic and ignorant my guy
Cool stuff but probably mostly retained as nonsense
Thanks for watching doe
0:01
🙏
0:01