Full Color Change Paint Job

If you like to help out the channel--
Cash App --$PHARRAWAYPAINT
Walcom 360 bonding-soluti...
SEALER AND CANDY shop.thecoatin...
SILVER PAINT AND CLEAR buycustompaint...
WAX AND GREASE REMOVER www.amazon.com...
3M Soft Edge Foam Masking Tape www.amazon.com...
D/A SANDER www.homedepot....
80 GRIT SANDPAPER www.amazon.com...
180 GRIT SANDPAPER www.amazon.com...
Paint gun motivatedpaint...
Air compressor www.lowes.com/...
#candypaintjob
#howto
#grant7

[@gregt722]

It’s cheaper to fix up a decent vehicle than to buy a new one. Looks amazing.

[@joaquinmireles3912]

People have no ideal how much work goes into doing a color change the amount of work is insane

[@douglasthompso]

Great job very nice

[@chriskappes9170]

Very dramatic color change but i always liked midnight blue excellent work

[@MrAbfam]

never regretting subscribing, always👍👍👍👍👍

[@DayDay_Suave]

Thanks for the educational video 🙏

[@dayslife]

Top notch paint job👍🏼

[@jeffdoane9436]

Thank you so much! I love your work. You are badass.

[@PHARRAWAY]

Thank You for stoping by brother

[@jeremythornton9838]

I wash and wax grease remove before I sand stop from sanding wax around fisheyes later

[@lesliwells5433]

THANKS FOR THE NEW VIDEO

[@lesliwells5433]

YOUR WELCOME,I AM STILL LEARNING ALL I CAN SO WHEN EVER I PAINT MY VERY FIRST FENDER OR SOMETHING,I WILL DO AN GREAT JOB,THAT IT WOULD BE SOMETHING TO BE PROUD OF........

[@slackerzsincity8822]

Another outstanding job

[@ericgonzales194]

All ways top notch 💯💯

[@bigsquatchsasfoot1964]

Nice job , looks new again 👍

[@johnsmith-qz4bv]

Great video a lot of work to do a full color change but well worth it … why don’t u use pps cups ..? That way u can turn the gun upside down to get under bumper and rockers. And the paint won’t drip or spill out ….. keep up the great content…

[@PHARRAWAY]

this is an older video, now I'm using pps cups

[@21guillotine]

Man that looks good...

[@tripleeathletics]

Pharraway, You don’t need to explain ANYTHING! I’m willing to bet money that I can fix dents on flat panels with a DA sander and it will look better than many people can make it look with a block! But, there’s one objective, and that’s FIX THE DENT right? So who cares HOW YOU Do it! As long as the end result is a flat surface, Who cares!!! I can Guarantee you one thing, I will be done MUCH FASTER than those using a block! That equals more hours and more money in my pocket… I just don’t understand how anyone can bash someone because they aren’t doing it the same way as they do. As long as we reach the same conclusion who cares…. 🤦‍♂️

[@PHARRAWAY]

You are correct brother

[@ryanten5933]

You need to build yourself 2 scaffolds the length of your booth so you don't have to keep moving that short one and stiring up dust

[@PHARRAWAY]

TRUE

[@bobbymolak3364]

Always Great Content , Totally respect All you do to Help us rookies ❤️🙏 , one question I have and again I’m a rookie at this so don’t laugh, but we used ever coat polyester high build primer on a restoration project , can we use Ure Chem sealer and paint to finish our project ? As always any information would be helpful . Thanks And Make It A Great Day ❤️🙏

[@PHARRAWAY]

Yes, you can urekem is one of my favorite sealers

[@bobbymolak3364]

@@PHARRAWAY Thank you very much and have a blessed day ❤️🙏

[@vman08840]

How do you tape the inside and plastic, is it hard to take off the door bumper and stuff and could you do it by yourself. On and off?

[@PHARRAWAY]

it's a bit hard

[@jorelsmith1985]

Great video man

[@Slicpartna]

Enjoyed the content and the information
Do you tack rag in between coats of base?
Thanks

[@PHARRAWAY]

yes I do

[@Slicpartna]

@@PHARRAWAY thanks

[@cesara.cristernajr.8879]

So Ive been watching your videos and I have this question okay the spray guns you use i camt afford those type guns too expensive but i see why your paint jobs are clean af bro okay the spray guns i can afford are the$ 100-$130 spray guns on ali-express so am i waisting money on a cheap gun and do you sell your old spray guns you dont use anymore or the spray guns you display or advertise do you send them back to the company or keep them?? Also notice the spray guns you use are alot bigger than the cheap spray guns so the ones you have are the professional spray guns the real deal?? Thanks

[@PHARRAWAY]

ua-cam.com/video/sPxvaMAsXjY/v-deo.html

[@TravisworshipsYAHWEH]

🔥🔥🔥

[@Jason-zr6il]

Great job. About how much paint did you use to do this job? Base coat and clearcoat

[@PHARRAWAY]

1gal of each

[@matthewmorton211]

Can we get more details on the color code used?

[@PHARRAWAY]

www.thecoatingstore.com/product/urechem-two-stage-midnight-shadow-blue-pearl-basecoat-clearcoat-car-paint-kit/

[@carolinareaper1232]

When you have to use a sealer, should you use an epoxy primer sealer, or is a standard acrylic sealer sufficient? (Healthy old surface, no burn-through)

[@carolinareaper1232]

more specifically, my question is, is it worth using epoxy sealer or is it not necessary?

[@PHARRAWAY]

acrylic sealer should be sufficient

[@ugurbuyuk5138]

Hi what’s the sealer brand thank you 🙏

[@PHARRAWAY]

Urekem

[@ugurbuyuk5138]

@@PHARRAWAY thank you 🙏

[@carolinareaper1232]

great work and video again! instructive, thank you!

[@michaelogden2359]

Great paint job as always what spray guns are you usings, thanks for the great video...

[@PHARRAWAY]

it's the walcom carbonio 360 HTE

[@michaelogden2359]

@@PHARRAWAY same gun for the whole job looks like it really throws the base and clear down great.

[@PHARRAWAY]

They are some of the best guns I'm also selling 2 of this guns

[@michaelogden2359]

@@PHARRAWAY what kind of price for one..

[@PHARRAWAY]

@@michaelogden2359 you can email me at [e-mail]

[@gregoryjowers3629]

How do you get the doors back on without scratching the door jams

[@PHARRAWAY]

very very carefully

[@nelsonfernandez7473]

Pharraway being new and trying hard to learn i have to ask , do you have to clean the gun between bass coats before filling up or do you just fill the cup between fill with out cleaning thanks

[@PHARRAWAY]

no just clean it before the clear

[@konstantintop-painting6882]

Sorry but you have to learn the red scotch brite is not creating adhesion

[@rongamble9884]

That's alot of money to pay for paint on a vehicle that old but to each there own

[@noahvaldez1968]

whats the gun you are spraying the clearcoat with? is it the same gun just a different tip size? i like the how its all black. good work btw

[@PHARRAWAY]

it's a walcom carbonio 360 hte 1.3 tip

[@noahvaldez1968]

@@PHARRAWAY sweet, im still learning but i definitely want to upgrade from my black widow eventually with one of those 💪🏽💪🏽

[@reygomez323]

I'm getting ready to buy a set of spray guns,what guns do you recommend and why,

[@PHARRAWAY]

You can email me at [e-mail]

[@tedc9306]

Brother how much was that paint job more or less with materials or without how much was it

[@PHARRAWAY]

you can email me at [e-mail]

[@tedc9306]

I emailed u

[@tedc9306]

Thank you for your fast response. Blessings

[@garyhawthorne1678]

can you still get that clear

[@PHARRAWAY]

yes

[@garyhawthorne1678]

is the grant 7 better

[@PHARRAWAY]

yes it is

[@crxtc007]

Where are u located?

[@PHARRAWAY]

Texas

[@chevy2297]

Whete u located?

[@PHARRAWAY]

Texas

[@lyasautofox]

👍👍👍❤️❤️❤️

[@user-ys3du6jt1o]

you're painting in the dark man get some more light

[@PHARRAWAY]

you are correct

[@Donnelly369]

I have 17 princess auto garage lights still feels dark one car garage 25 feet long 17 feet wide