MAPerformance Catted Downpipe Install | 2018 Honda Civic Si |

Поділитися
Вставка
  • Опубліковано 11 вер 2024
  • Today I installed the MAPerformance Catted Downpipe on my 10th gen Honda Civic Si! Safe to say this upgrade was WELL worth it! As you'll see in the video, it sounds absolutely incredible!
    #10thGenHondaCivicSi #MAPerformance #Downpipe

КОМЕНТАРІ • 63

  • @BlackstarSI
    @BlackstarSI 2 роки тому +4

    Kyle my guy! Congrats on the new downpipe, fam! I just got a 27Won downpipe to install myself. Great video 💯

    • @kylepalaian
      @kylepalaian  2 роки тому +1

      Thanks homie!! You’re gonna love the downpipe, best upgrade I’ve done so far

    • @dylanrichards4565
      @dylanrichards4565 Рік тому

      Did the 27won downpipe throw a cel ?

  • @FC3_RIPPER
    @FC3_RIPPER 5 місяців тому +1

    Dope man i appreciate the vids. I just picked up a 18’ si coupe so you’re teaching me alot. I just did a GReddy DDR catback. Im thinking of doing the MAP downpipe next!!

    • @kylepalaian
      @kylepalaian  5 місяців тому

      Thank you man I appreciate it! I’ve had no issues with the downpipe at all, but you will get a check engine light so be prepared! Also enjoy the car they’re fantastic

  • @FC3_RIPPER
    @FC3_RIPPER 5 місяців тому +2

    Which tune you running? Just started the vid sorry if answered later on…

    • @kylepalaian
      @kylepalaian  5 місяців тому

      I’m not tuned actually. It’s probably not great but I have no issues so far! Just waiting to get an intercooler before I get a tune

  • @raymondamoroso2049
    @raymondamoroso2049 Рік тому +1

    Sounds way better in your video than the uploaded sound clips on the reviews from MAPs website. One clip sounded like a damn peterbuilt lol

    • @kylepalaian
      @kylepalaian  11 місяців тому

      Lmao yeah I guess it depends on how you film it. I’m really happy with it still, even months later

  • @Rishidriftwood
    @Rishidriftwood Рік тому +1

    Bro this is amazing sounds calm but mean.

    • @kylepalaian
      @kylepalaian  Рік тому

      Thank you! My setup is the MAP Catted downpipe and HKS hi-power catback

  • @bobbykoller2003
    @bobbykoller2003 Рік тому +1

    No update on how you disconnected the O2sensor clip or how you got the stud out? Wtf?

    • @kylepalaian
      @kylepalaian  Рік тому

      My bad, the 02 sensor turned out to be just fine and I didn’t have to do anything with it. And the broken stud I just reused as it had enough threads to get the new downpipe on

  • @analogd4ve
    @analogd4ve 2 роки тому +2

    Sounds incredible!

  • @ToxicMinecraftV2
    @ToxicMinecraftV2 Рік тому +1

    Hey boss just curious did you get any codes for putting the dp on thinking about getting one when i buy my si

    • @darrellkahalewaijr8581
      @darrellkahalewaijr8581 Рік тому

      I got a shit ton of codes. I used ktuner to turn them off. Haven't been back on since.

  • @H.D.B.23
    @H.D.B.23 2 роки тому +3

    How's the drone in the car?

    • @kylepalaian
      @kylepalaian  2 роки тому +1

      It’s actually not too bad, it’s slightly worse than before but it’s definitely fine for a daily driver

  • @kidstarr100
    @kidstarr100 2 роки тому +1

    Now I wanna get a down pipe on my Si, also Lunar silver sedan twins!

    • @kylepalaian
      @kylepalaian  2 роки тому

      The downpipe is 100% worth it! And you made a great choice in color and body 😂 looks so good and is super practical too

  • @gabeq01
    @gabeq01 Рік тому +1

    You look so familiar. Idk if it’s the way you kinda look like one of the spiderMan actors or what😂 anyways I’m getting this downpipe tomorrow to pair with my catback. Hopefully will sound pretty loud

    • @kylepalaian
      @kylepalaian  Рік тому

      😂 bruh I wish I was one of the Spider-Man actors! You’ll 100% enjoy the downpipe it’s worth every penny

  • @braydenbrooks1009
    @braydenbrooks1009 2 роки тому +2

    Hey dude what off-set and size are you running on your wheels and tires?

    • @kylepalaian
      @kylepalaian  2 роки тому +1

      I’m running 18x8.5 with +35 for the wheels, and a 245/40/18 tire on all corners

    • @braydenbrooks1009
      @braydenbrooks1009 2 роки тому +1

      @@kylepalaian interesting, my wheels are the exact same spec but don’t look as flush as yours.

    • @kylepalaian
      @kylepalaian  2 роки тому

      @@braydenbrooks1009 How’s your alignment? Before I got an alignment my fitment was more tucked

    • @braydenbrooks1009
      @braydenbrooks1009 2 роки тому +1

      @@kylepalaian ohhh that’s a good point the camber is probably set differently

  • @yksanta8997
    @yksanta8997 2 роки тому +1

    Aye bro you know how there’s a gasket between the frontpipe and downpipe did they give you one to put there?

    • @kylepalaian
      @kylepalaian  2 роки тому

      Unfortunately they did not, if I remember correctly I did reuse the old one though. You have me second guessing now 😂

    • @yksanta8997
      @yksanta8997 2 роки тому +1

      @@kylepalaian oh oka I’m talking about the circle ring on the front pipe, I have AWE exhaust which included a front pipe and I couldn’t get that ring out of the factory front pipe so I just used silicone sealant in its place but if I take it off to install a downpipe I would Needa re do it or use a the gasket that’s why I asked

  • @RJFROMTHEBAY
    @RJFROMTHEBAY 2 роки тому +1

    🔥

  • @stephentesta6011
    @stephentesta6011 Рік тому +1

    Hey I snapped the stud as well what did you do to fix it. Seems like a pain in the ass

    • @kylepalaian
      @kylepalaian  Рік тому

      😂 funny thing is I didn’t fix it, there was enough left to bolt up the downpipe with the broken stud no problem

    • @stephentesta6011
      @stephentesta6011 Рік тому +1

      Oh you got lucky lol I snapped the same exact one you did but there’s not enough thread to screw the nut on. Debating what I should do. Do you think 3 of 4 bolts holding it on is good for now?

    • @kylepalaian
      @kylepalaian  Рік тому

      @@stephentesta6011 I would go for it then check for leaks immediately after you put it on. If it’s not leaking you’re good to go, if it is leaking then you’re probably going to have to buy the oem stud from Honda and drill the old one out

    • @kylepalaian
      @kylepalaian  Рік тому

      @@stephentesta6011 if you’re not comfortable doing that you could take it to a shop to get the new stud in and they shouldn’t charge you too much as it’s a pretty quick job

    • @stephentesta6011
      @stephentesta6011 Рік тому

      This is a nightmare. No shops will touch my car due to the fact that it’s the turbo stud and I definitely have an exhaust leak. Im super disappointed and don’t know where to go from here

  • @carlocruz7406
    @carlocruz7406 8 місяців тому +1

    Did the check engine came on?

    • @kylepalaian
      @kylepalaian  8 місяців тому

      Yeah and it’s still on to this day lol

  • @waldydior2389
    @waldydior2389 Місяць тому

    Do you need the turbo to put it on?

    • @kylepalaian
      @kylepalaian  Місяць тому

      @@waldydior2389 the downpipe will only fit on the models with the 1.5T

  • @amazachvlogs9664
    @amazachvlogs9664 2 роки тому +1

    Sounds nice. Which exhaust you have on.

    • @kylepalaian
      @kylepalaian  2 роки тому

      I have the stock front pipe and the HKS Hi-Power catback

  • @drumminsonlive9199
    @drumminsonlive9199 10 місяців тому +1

    Will it pass emissions inspection

    • @kylepalaian
      @kylepalaian  10 місяців тому

      I have no idea, I don’t live somewhere where emissions testing is required

  • @darrellkahalewaijr8581
    @darrellkahalewaijr8581 Рік тому +1

    Did u end up getting the heatshield back on?

    • @kylepalaian
      @kylepalaian  Рік тому

      No when I got the downpipe I cheaper out and didn’t check the box for heat shield bolt holes. So you can get the heat shield back on if you spend the extra money and get the optional bolt holes

    • @darrellkahalewaijr8581
      @darrellkahalewaijr8581 Рік тому +1

      Hey man i ended up buying the one with the heatshield bolt. Major pain in the ass. I didn't have the right tools. I Would definitely recommend having a flex head ratcheting wrench when installing.

    • @kylepalaian
      @kylepalaian  Рік тому

      @@darrellkahalewaijr8581 oh man I’m sorry to hear that, but hey it’s definitely worth it 😂 my engine bay gets extremely hot without that heat shield

  • @crakzor
    @crakzor 2 роки тому +1

    any error codes yet?

    • @kylepalaian
      @kylepalaian  2 роки тому +1

      Yeah, I get an “emissions system problem” whenever I start the car and the check engine light stays on

    • @crakzor
      @crakzor 2 роки тому +1

      @@kylepalaian I was looking to get a new DP. I’m MAP everything cept stock DP. I was looking at PRL’s high volume one that doesn’t trigger error codes.

    • @kylepalaian
      @kylepalaian  2 роки тому +1

      @@crakzor I love PRL as a brand! Everything I got from them has been 10/10 so I’ll bet their DP is phenomenal

    • @nilkumarthanki1652
      @nilkumarthanki1652 2 роки тому +1

      @@kylepalaian what will you do for the error code I just got mine installed

    • @kylepalaian
      @kylepalaian  2 роки тому

      @@nilkumarthanki1652 well, when I finally get a ktuner I’m just gonna turn it off with that

  • @Joshhh..
    @Joshhh.. Рік тому +1

    Perfect

  • @crakzor
    @crakzor 2 роки тому +1

    I love you

    • @kylepalaian
      @kylepalaian  2 роки тому

      😂 thank you for the support ily too

  • @w0lf9009
    @w0lf9009 9 місяців тому

    Dude calm down still doesnt sound that great