My fat tire bike got a flat and all just want to know how to disconnect the wires without missing the back wheel up and I've been searching for weeks and I haven't found the right results yet
Hi, I'd rather be interested in how to connect two identical motors to two different controllers where one controller has an LCD display connection and the other has only a throttle link. The LCD display has 5 wires, while the throttle control has only 3 wires. I'd be interested in a video.
Hi can you tell me how I can connect the JRAHK BLDC 72V 3000W Electric Motorcycle Controller. I mean that I would like to find a wiring diagram .Thanks
Hi, I like your videos. I help you, I have a 250w to 36v motor and my doubt is that it has 6 threads, the three normal fat ones and another 3 thin ones in black, red and white ... I have a controller at 36 and 15A as Can I connect to work if it only has 6 threads and it is supposed to be 8 threads? this driver has pedaling assistant do I have to buy another one? I ask you to help me thank you very much.
Hello my friend... Normally hub motor have 8 wires, 3 thick wires( green, yellow, blue) and 5 thin wires( red, black, yellow, blue, green) maybe your think wires is cut from motor... But you can also connect only 3 thick wires to controller if your controller can work with out hall sensors... If you can send me on my email photo of your motor wires..
hello teacher thank you very much for answering my previous message I will send you photos as soon as I can now I am not at home. and indeed the cables are repaired since they were split ... I'm excited I hope to solve my problem with your help thanks
Great video. Modding my Super73 Z1. Motor works - checked multiple times with multimeter reader and with ebike controller testing device. All the parts I have new , throttle brakes, controller, lcd, etc. When I connect all the pieces and turn the throttle to see if wheel turns …. Nothing. Does this mean I need to go through these tests? Again, all parts a new and compatible, and motor phase and motor Hall sensors are in working perfectly in diagnostic testing. I’m a beginner so I know I’m missing something. Think it just a matter of trying these combinations. Also, when I try these combinations and hit the right one, will the wheel/motor turn when I engage throttle slightly? What should I expect? Hope you can help. Great video. /Bklyn👑
Hello, if I provided you with my controller brand and model along with my hub motor brand and model could you possibly tell me what the best wire orientation is for my particular setup? I have a 60v 26ah electric scooter that runs two controllers and two hub motors. The scooter is a Langfeite T8. Thank you!
Hi. I'm making a 3 wheel scooter. Is there a wiring set up to make the handle bar twist controllers to come on slow and smooth? It's hard to control starts and direction. Really jerky..
Hello i have problem with my ebike...i change my motor hub from 1000 watts to 1800 watts but its not perfectly working beacause its too noisy and very slow running....my controller is 1800 watts.i already do swap all d wiring from motor hub to controller...thank you...
Sir I have new geared motor 48v 1000w and have bad noise from the start run. That is wrong from lahse wire combination or hall combination?, thanks, ill appreciate your answer...🙏
Hello. I bought a bike, but without a handle. I bought a handgrip and module. And I tried all the possibilities to connect. Unfortunately, the engine does not go. What could be the reason? Please help.
hello teacher in the pictures I indicate that the red and black coming from the LCD go directly to the connection of the battery blue is the S signal, I think the red and black that come out of the lcd are understood ...
Hi sir I have an e bike which I have purchased from my friend I don't know its voltage and watt of hub motor and he says that the motor has been changed, so sir please u help me to find it's voltage and watts
I bought a chinese controller fot My scooter and i get E1 .... Do i have to chance the combination until the error dissapear?
Witch one is most instant acceleration? Drag?
Thank you giannis for this video
My fat tire bike got a flat and all just want to know how to disconnect the wires without missing the back wheel up and I've been searching for weeks and I haven't found the right results yet
Hi, I'd rather be interested in how to connect two identical motors to two different controllers where one controller has an LCD display connection and the other has only a throttle link. The LCD display has 5 wires, while the throttle control has only 3 wires. I'd be interested in a video.
Damm brother u saved my life that was very helpful
What did use combination for teverun blade mini pro.😊
Thank you 😘🙏👍👍
I solve my cracking sounds with help of your video 🙏
I want to increase my motor speed how to do this i don't know
36 combinations to try and see which one works :P
Hi can you tell me how I can connect the JRAHK BLDC 72V 3000W Electric Motorcycle Controller. I mean that I would like to find a wiring diagram .Thanks
How do you disconnect the wire from the back without messing it up that's all I want to know so I can change my tire
unplug it and plug it back in it wont mess anything up
Hi, I like your videos. I help you, I have a 250w to 36v motor and my doubt is that it has 6 threads, the three normal fat ones and another 3 thin ones in black, red and white ... I have a controller at 36 and 15A as Can I connect to work if it only has 6 threads and it is supposed to be 8 threads? this driver has pedaling assistant do I have to buy another one? I ask you to help me thank you very much.
Hello my friend... Normally hub motor have 8 wires, 3 thick wires( green, yellow, blue) and 5 thin wires( red, black, yellow, blue, green) maybe your think wires is cut from motor... But you can also connect only 3 thick wires to controller if your controller can work with out hall sensors... If you can send me on my email photo of your motor wires..
hello teacher thank you very much for answering my previous message I will send you photos as soon as I can now I am not at home. and indeed the cables are repaired since they were split ... I'm excited I hope to solve my problem with your help thanks
Most likely the white wire is speed sensor...
Great video. Modding my Super73 Z1. Motor works - checked multiple times with multimeter reader and with ebike controller testing device. All the parts I have new , throttle brakes, controller, lcd, etc.
When I connect all the pieces and turn the throttle to see if wheel turns …. Nothing.
Does this mean I need to go through these tests? Again, all parts a new and compatible, and motor phase and motor Hall sensors are in working perfectly in diagnostic testing. I’m a beginner so I know I’m missing something.
Think it just a matter of trying these combinations. Also, when I try these combinations and hit the right one, will the wheel/motor turn when I engage throttle slightly? What should I expect?
Hope you can help. Great video.
/Bklyn👑
IM wondering the same thing. I guess we will find out after trying the combos
Hello, if I provided you with my controller brand and model along with my hub motor brand and model could you possibly tell me what the best wire orientation is for my particular setup? I have a 60v 26ah electric scooter that runs two controllers and two hub motors. The scooter is a Langfeite T8. Thank you!
Hi. I'm making a 3 wheel scooter. Is there a wiring set up to make the handle bar twist controllers to come on slow and smooth? It's hard to control starts and direction. Really jerky..
do you know the right combination for xioami m365
Hello i have problem with my ebike...i change my motor hub from 1000 watts to 1800 watts but its not perfectly working beacause its too noisy and very slow running....my controller is 1800 watts.i already do swap all d wiring from motor hub to controller...thank you...
Sir I have new geared motor 48v 1000w and have bad noise from the start run. That is wrong from lahse wire combination or hall combination?, thanks, ill appreciate your answer...🙏
Sir Same I have this proble.
How many number combinations did you do?
Sir Same I have this proble.
How many number combinations did you do?
It looks like it doesn't matter if the colors do not have to match
Whats the purpose of these different wiring please ?
Hello. I bought a bike, but without a handle. I bought a handgrip and module. And I tried all the possibilities to connect. Unfortunately, the engine does not go. What could be the reason? Please help.
Hi friend if you can send me photos on my email with your controller wires and handle wires
What combination for a QS v1 well work on it let me know please tanks.
Hi Casar Padro, what you mean QS V1 in graph? sorry but i did not understand you.
hello teacher in the pictures I indicate that the red and black coming from the LCD go directly to the connection of the battery blue is the S signal, I think the red and black that come out of the lcd are understood ...
Ok, so take from any ware +5 volts (black,red ) and for signal connect blue wire.
1drv.ms/u/s!Aqgf6_KGvbjwrEnkDCX6JRb_koZ7
80A controller hub motor is a Qsmotor v1 3,750w with what combination will work better.
80A controller rated or max output? On 72Volts? If your hub motor is 3000W rated on 72Volts you need controller with max output 85A
Hi sir I have an e bike which I have purchased from my friend I don't know its voltage and watt of hub motor and he says that the motor has been changed, so sir please u help me to find it's voltage and watts
Hi.... hub motors have numbers like sirial number, can you write them here ?
Sir there is no serial numbers on it and on that hub motor there is a name thats too in other language I'll send u photos sir
Sir if u send ur Gmail I'll send photos sir
Hi sir I got that serial numbers here it's HC06111938
Sir plz tell me fast . Thanks so much sir