C.K. tries a Yihua Hot air solder rework station model 959D

Поділитися
Вставка
  • Опубліковано 15 січ 2025

КОМЕНТАРІ • 25

  • @TychiBalls
    @TychiBalls Рік тому +3

    The handle cools when you put it back into it’s holster. Then when you pick it up it will reheat. I dont have one of these units so not sure if its a sensor on the holster but I learned in this in another review video.

    • @CKHaun
      @CKHaun  Рік тому +3

      Yes, a magnetic switch either in the handle or the rest. And after a number of months using it I do really like it.

    • @TychiBalls
      @TychiBalls Рік тому +1

      @@CKHaun thank you for making the video. It has helped me decide that I want to get this eventually. Thanks again.

  • @CiderPang27
    @CiderPang27 2 роки тому +4

    If you read the instructions they would tell you it goes into standby when the handle is placed in the cradle.

    • @CKHaun
      @CKHaun  2 роки тому +6

      "If you read the instructions..." well yeah, but where would be the fun in that? :)

  • @englishrupe01
    @englishrupe01 2 роки тому +1

    I have been extremely pleased with my Yihua 898D purchased over 2 years ago. As i am sure you have realized by now, the fan DOES keep running until cooled down, when placed back in its' cradle, as it has a magnetic switch in the cradle. It's early in the video so you may realize that later.

    • @englishrupe01
      @englishrupe01 2 роки тому

      PS....that is the reason for the "odd" angle of the cradle, to make sure it sets back correctly.

    • @CKHaun
      @CKHaun  2 роки тому +2

      Thanks for the tip! I did NOT know that (though some Hakko's work that way also). My go-to Wellers do not do this so I wasn't expecting it.

  • @wookieecantina
    @wookieecantina 2 роки тому +1

    Very nice video, thank you for sharing.
    I've enjoyed my Yihua solder/desolder station and for me, a non-pro, it works quite well. Seems to be in vogue to really criticize these units, especially by techs, but I didn't have the funds for a Quick brand hot air station. Mine sometimes make a little noise when I first turn it on, but it goes away quickly once warmed up.
    Nice to see an honest review. 😊Thanks, C.K.!

    • @CKHaun
      @CKHaun  2 роки тому +6

      Equipment snobbery is a thing, and not really useful. Cost doesn't determine the value of a tool, "Does it work and suit my needs" is value proposition at any price.
      And glad you like this quick vid!

  • @intelin123
    @intelin123 Рік тому +1

    So the temperature setting is at 619 c or f ??

    • @CKHaun
      @CKHaun  Рік тому +1

      Fahrenheit, I am incompetent at Celsius.

    • @intelin123
      @intelin123 Рік тому

      @@CKHaun ok. Thank you.

    • @intelin123
      @intelin123 Рік тому +1

      I have my yihua reworks station at 660 and solder does not melt.

    • @CKHaun
      @CKHaun  Рік тому

      Is the solder lead-free? Lead free melts about 50 degrees F higher than leaded solder, so you may need to maximize the air temperature or bring the air nozzle very close to the work. I've also found that, as you might expect, higher air flow rates help a great deal.

    • @intelin123
      @intelin123 Рік тому +1

      @@CKHaun i set it at 800 and applied heat for like 30 seconds and it came off. I am replacing ps5 controller joysticks for my son. Thanks. 650 was not hot enough

  • @johnd942
    @johnd942 6 місяців тому +2

    A rather clumsy presentation. You clearly didn't research the YIHUA 959D unit.

    • @CKHaun
      @CKHaun  6 місяців тому +6

      No I did not research anything. I buy stuff and mess with it. That's why it says 'C.K. tries' not 'C.K. reviews'. I don't do reviews, I grab things and see how useful to me they are right out of the box like, I dare say, a great many people. THa's my thing, if you want well researched and comprehensive reviews that ain't me.

    • @fredkerfwappie8380
      @fredkerfwappie8380 6 місяців тому +1

      If you were observant, you would have seen that after you put the nozzle back in the cradle, it started to decrease temperature as it cold off before shutting down and going into standby.

    • @CKHaun
      @CKHaun  5 місяців тому

      True enough.

  • @ernobalazs7860
    @ernobalazs7860 8 місяців тому +1

    The whole video is a cabaret... "why are there 2 short screws in the box?".... "handset powered off, I wonder why".... absolutely ridiculous. The last video on earth from which I would want to get relevant info...

    • @CKHaun
      @CKHaun  8 місяців тому +2

      “Life is a Cabarat, old chum” as Sally Bowles sang to us Again, fortunately you have many other options on UA-cam to better suit what you’re,looking for. At least you commented, which I appreciate.

    • @kirtwedel9275
      @kirtwedel9275 Місяць тому

      Yet here you are taking your time to complain on the internet. Well done sir well done...