Cheapest Honda 200x Is FIXED!
Вставка
- Опубліковано 2 жов 2024
- I split the cases on my 1985 Honda 200x and fix the 4th gear issue.I then take it for the first test drive. #Honda, #200x, #Fix,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►►► ADD ME ON ALL SOCIAL MEDIA ◄◄◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
The best investment for repairing any engine: Tusk Crank Case Splitter amzn.to/3f2i0H8
Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot!
Check out my Instagram: 2_vintage_
Thank you for all the support!
Thank you Joe for what you do you inspire a lot of people even us older folks Love those old three-wheelers as always great video good drone footage too it's freaking awesome man congratulations on another successful build God bless you and your wife keep them coming
You have the patience of a shaolin monk. When that thing didn’t kick over after the 10th try that’s when I start cussin. Me and my kids watch all of your videos keep’em coming. Nice work
Yeah i was getting worried! I did not want to tear the engine apart again!
Yeah those old hondas 200/185 are kind hard to start but its lot of fun. I think them make bubles in the carb or somethig
Let's all give Jade a huge shout out for getting Joe a drone for Christmas!! I cannot wait to see all the bad ass drone footage coming up in upcoming videos
yeah
Those old Honda's are close too bulletproof ...hard to believe that 4th gear was ground off like it was...the instructional part of your videos the best part...
Yeah I couldn't believe it when I first saw it!
The old ones are better than the new ones! Nowadays Honda is far from best engines in quads, UTVs or dirtbikes etc.
some one have swap gears with out clutch and in wrong rev so that do at gears gonna broke or eat it up.
I absolutely LOVED my 200x in the snow, especially with 18” rear tires I had helping to take some tippiness out of it. It was an absolute ball ice riding out on the bay. Please tell me you’re going to get a real set of tank shrouds right? Even the oversized ones from Maier look better than what’s on yours Joe. Btw, Pro-Link was how Honda marketed their rear suspension linkage starting in the early 80’s so that’s just a stock swingarm you’ve got but painted blue.
Me too, loved the 200x
I.got the same 200x once again had it 18yrs runs perfect every time
Love your videos. Can't wait for the next one! Keep up the good work
Nice job. Go really easy on the gasket sealant. You don't want globs of that squeezing out into engine. And you might want to clean a little more thoroughly after honing.
It’s always good to wash out with hot soapy water after honing. Just gotta make sure you dry it real well
Those were great machines.. had an 84 but the frame was shot.. front swingarm pivot was so wore out even new oem bearings would fall out lol. Finally got an 86 with the square frame and the 6 speed transmission and liked it a ton more but that's still a good trike and a lot of fun. Keep it up bro👍👍👍👍
I did have a 83 model but I don't have it now
mechanically it sounds great. Running wise it sounds like its misfiring. That would also explain why it keeps dying and is hard to start. even back when you first got spark out of it in the other video it seemed intermittent.
I have 3x 200x’s they are great machines! Picking up in value too! Sold 2 clean ones last year. One for 3000 and one for 3400! Holding on the the ones I have now.
Your nuts with that driver on the clutch hub haha, first time I was doing any engine work was a clutch and when I started tightening those spring bolts one just ripped the thing behind the inner that the spring sit round and since then im extra scared when it comes to small bolts getting torqued 😂
My first experience with the clutch hub, I tightened them with my impact, and sheared the head right off! Needless to say, I only use a ratchet on those now!
Love your videos. Can't wait for the next one! Keep up the good work
Awesome! Nice gift from Jade!
Hi 2vintage i like your content and i think it is really entertaining
The drone shots are awesome 👌
I’d love to see a big red 250es or 250sx I have a 85 250es and they’re a ton of fun
am 16 and seriously considering getting an apprenticeship at a mechanic shop and wanted to know what one of the biggest things you learned through your experiences about fixing engines?
By the way I liked your drone shots👍
I have a sweet 200x i was ringing donuts in the Hardees restaurant parking lot that shut down because of snow.i hit the curb under the snow.threw me off...landed on me and snapped my ankle.ouch!! Didn't mess up the mint 200x luckily. I can get another ankle...not another 200x haha
It's always a great feeling when I tear down an engine that far and then hear it running again. Especially when it doesn't have any leaks or any other problems. Great job on this one. Good luck with your Quadzilla/Banshee. Stick with it, don't let it win! I still think that the piston is coming too far out of the top of the cylinder at top dead center. The cylinder has been milled or wrong piston or wrong head gasket thickness. Great drone footage. 👌 Again, good luck!
Can't wait for a kx500 build,would love that!👊🤯🤔🤯👊
I’ve used a narrow metal spatula that I’ve sharpened to these years,so the edge is a good and it's good tool for removing a old caskets, but sometimes I use a razor blade and i have use plastic on the other blade so I don’t cut my fingers or anything else open.
You were simply out of gas. Once you put it on reserve you were good to go for a bit longer. Great video as always.
Just a wicked little bike ya got there boy 😊😄
Hey mate I have ttr 230 dirtbike that when I put rev I or just while riding and when I open the gas fast it stalls or starts to turn off. Do you have any idea what would be going on I just assume it's the Jets
I’m really interested in that 200x.
Picked up a pretty clean 84 200x couple weeks ago guy said it was having a very hard time starting and running compression felt low gave it a simple valve adjustment and it’s like a brand new bike again runs great and strong not bad for 750 bucks
I just picked up the same thing with same problems this weekend. Hoping a quick valve adjustment solves the issues!
I could feel the anxiety in your voice after it shut off, between this one and the quadzilla i'd be drinking :P
Yeah I was a little worried!
Sa ce voie tu Adore réparé des VTT..que c est une passion pour toi c est surtout pour sa j aurais aimé que sa soit toi qui le répare..entk..je veux démaré un dép en mécanique léger..tu ma donné le gout de le devenir..merci j adore tes vidéo..son très bien détaillé et les vu son superbe ils sont clair on voit et comprend bien ce que tu explique..grasse a toi j ai même réussi a réparé quelque de mes encien vtt
I had a 85 200X. Only toy I ever bought new. I love Honda's but trikes are dangerous. I've had lots of snowmachines and dirt bikes and the only time I've got hurt was on a trike.
Nice i miss the one i had
Can I buy some of the old left over trans from you?.. I have a 84. It don’t shift for 1-2 all else works. I think it’s got bad gears and bent fork.. Love these 200Xs. Mine is all original from 84.
Yes just message me on Instagram
Should try out the red gasket tack instead of using RTV might be cleaner and easier.
Nice views from the drone!! My kids love your vids great job joe
Its probably stripped from pulling cars out of the snow banks. LOL could be? Awesome job making that tranny fit right with the gear swap. No smoke listen to that baby idle it sounds perrrrfect.
Haha I'd like to see that!
On Japanese bikes and quads the screws are jis not Philips I recommend the vessel brand of screwdrivers
Nice! Sounds a little choppy at top end, I would replace that twist throttle on it with a thumb throttle. Honda should have put electric start on all the 4 strokes.
electric start would be nice!
....I was thinking the same thing. 👍 throttle. 😂 Too each his own.😎
Show me a man who doesn't enjoy doing donuts on a 3-wheeler, and that's a man whose soul is dead lol
Hello you sprayed it when you checked the spark plug
2nd
Who needs mainstream TV when you have You Tube channels like 2vintage .
You definitely need to pick one bike n fully restore it with fresh powder coats a small series of the progress n best doing a trike probably because they are the rare ones imo
That 350x would be perfect for a complete stage 0 ( factory specs)rebuild they're the undisputed kings of 80"s Honda trikes no doubt about it. The 86 being a bit more nimble in my memories anyway 😂✌🏻
2Vintage..Hey buddy I just wanna give u a idea for that Quadzilla that blew up on u twice..
If u put a spacer or maybe 2 gaskets before u put on the head,then do a squish test w/a(paperclip)+then check it w/the micrometer.U should get the right reading.
I had a kx-125 big bore 80 over wisco piston.And kicked it over and it was idling.Then "click"-Motor siezed in 7+1/2 min.. Bought another piston and rings.But a cheaper piston,and I told the guy what happened.He said"The head must've been leaking"
Anyway I took the "cheaper after market piston put it on the bike used 2-head gaskets+ gasket sealer.. Tightened down the head put the dome on..4-5 kicks the bike fired up.Stayed Idiling,little Rev's for about 20-minutes.Then it was fine.With that big bore on it.Wow it was fast.(But the moral of the story is it took 2head gaskets to fix my problem)
Your killing me...all that time and you didn't open the gas tank and look to see if there is any gas! First thing I would've done
Good fix Joe, although it should start with fewer kicks than that!, did it need a squirt of easy start again as l noticed seat was off after it came off the trailer ? Maybe those wires, fuel tap not flowing correctly or carb needs a little tweeking if you need to have it idling quite so fast?
Miss my buddy
Now this is how you jump start a Friday morning 💯👍🏾😬
Excellent job Honda tough.
Fourth gear left the chat
Another successful mission, great job sir.
I look forward to your videos. Love the builds and all the cool old bikes you choose to fix up. Favorite UA-camr.
Trash in the tank.
U DA MAN.. thanx
There is a 2 stroke kawsaki tecate on marketplace right now for 1500 i live in Pawling ny so if u check that area u can find that super cheap legend!! Says that it turns over just bin in a barn for 20 years
@Whoop! 'sup Joe :)
No concern whatsoever that every bearing in that engine and transmission ate all that metal??? 🤣🤣🤣🤣Worst hack on UA-cam
How come you never use the proper torque setting or a torque wrench i never use a impact on building a engine
I do! Nobody wants to watch me torque down bolts lol. I usually show me doing the top end torque settings
@@2vintage oh right thats why then
Great video Joe love the new drone footage 👍
The starter gear didn't look damaged or worn to me it just looks chamfered. Could be to allow oil to flow between the teeth better. Maybe a revised part.
Yeah that's whatbi was pointing out. I wasn't saying it was damaged, just different. I eneded up using that starting gear when I put it back together.
@@2vintage ohh ok I thought I heard you question if it was worn but I must have got it wrong. She is a beast now that's all that matters 👌😄😄
Great, happy new year😀🥳🇳🇴
Put thumb throttle back on that monster, twist will get ya hurt, my buddy in high-school had same quad, put twister on it, lost control trail riding (whiskey throttle) broke his neck, hit a ditch and flipped off a hill in the woods. Buke still runs to this day, a little beat up but you did a quality job on that. Sorry for the buzz kill, but don't want to. See you get hurt
aircraft remover works incredibly well on super old gasket bits left behind after removal. I use a small amount on a q-tip and run it around the mating surface and it turns old gaskets soft again and they come off like butter. Be careful with it, it’s super noxious. It neutralizes with water 👍 great product to have on hand with these old machines. Gets your mating surfaces spotless to ensure no leaks down the line. Be sure to use a damp rag and get it off/neutralize it before reapplying a new gasket. Cheers.
👌 i will try it out!
I assume you mean aircraft paint stripper? Also a good gasket scraper would help.
I have a 200x with no second gear, what’s the difficulty level to change the gear or shift fork. I have the parts and motor pulled I’m just too scared to take it apart.
Haha says it's running really good. Breaking up high rpm, starting fluid to start it, flat tires. This guy cracks me up.
Dial that thing in n it'll b even more fun to ride!!!
I look forward to your videos great job. U should revive a snowmobile. Next.
Out of curiosity do you need that much gasket maker? I understand a dab here and there to hold the gasket but that seems like a lot.
he is a hacker backyard mechanic!!!!
Awesome love the vids
It's getting to the point to where there's nothing you can't fix. Great job bro. Would love to own this machine. Do you plan on keeping it?
Ladies and Gentlemen,,,,, We give you The Master!!!!!!!
Let me know if you wanna sell that.... I've been looking for one but they are hard to come by in New England...
I always use the valvoline. I do got to say. I were all the way down there. Why didn’t u just buy a new piston too 🤦♂️. 😆 I mean whatever. I personally would’ve just put a new piston in. Not gonna give ya a hard. I was just expecting a new piston 😆
Cracking result joe runs great man the drone footage is awesome enjoy take care and all the best 🔧🔧🔧👍👌🏍🏍
Thanks for watching!
@@2vintage anytime mate
Another fine job, really enjoy the 3 wheeler videos it brings back a lot of good memories for me.
Funny been doing this same kinda stuff floor years never filmed it thought lol
Did it run out of fuel ,? Dunno but im not going to go thru the major hassle of taking the gas cap off and checking...
You need to move the kicker forward so it closes in by the motor you have it in the incorrect position and also did you notice how to tighten the chain on the 83-85 atc200x it moves the whole swing arm backwards it’s a bit over complicated but cool nevertheless only one of its kind Honda innovations baby I think the carb is plugged up cause I noticed the miss like it was kinda starving for fuel and FYI 83-85 is first generation they are the same everything is interchangeable 83-85 besides color options of plastic.
The 81-82 250r chain tightens the same as the 200x as far as the whole swingarm moves back to tighten the chain.
At 34:02 I see it sparking to body ground. Look carefully you will see it. under exhaust pipe
Yeah, I feel like I see that too right under the pipe.
@@cgreeneblue glad you saw it too
What would cause that?
@@2vintage No idea man...st elmo's fire?
@@2vintage I can't see where the spark is coming from clearly. Is there a wire? stripped insulation?
have you look spark plug cap i must say at you need to do that also at you find optimal what that engine likes and every tuners do same its it bikes - atv or a car.
I had a Tecate 250 extended axle that thing was a beast I let a old biker ride it he dumped the clutch his right leg went under the rear tire and he was holding wide open to try to not be drug under it his a tree totaled it. I thought he was a stand up guy but he never paid me.
First to view an like
I bet your parents love you destroying their yard. I know I'd be in trouble.
This is just a guess. With that twist throttle it was constantly flooded
Dommage tu n est pas du Québec..je t aurais envoyé mon polaris 4x4 a chaîne 2 temps...je vient de lui mettre un moteur remonté a l intérieur mais j ai un problème de carburateur et le fillage a été maudifié comme un con par l encien propriétaire..il a tellement de fils a l intérieur et reboutage que j aimerai lui refaire son fillage mais ne sait plus ou donné de la tête..j ai essayé de me fié sur mon 2 iemes que j ai mais lui aussi a déjà été modifier..
Love that bike I hope I'm lucky enough to own one someday
I’d love to see you try the aircraft remover trick in one of these videos. Everyone’s reaction is priceless given how much we’ve all struggled at one time or another with stubborn gasket bits.
I have aircraft paint remover. Does it work pretty well for getting off old gaskets?
@@2vintage get the Permatex gasket remover stuff you brush on and let it sit for a couple hours and it help get it off a lot easier
@@2vintage it’s ridiculous. Let it sit for ten minutes or so and it works killer.
Perfect amount of snow. Long live the trikes!
Yes it was perfect! Lots of fun!
I use auto transmission fluid in mine better for clutch don't get hot
Hold throttle open when you spray in the juice, gets it right up in there.
Had this same wheeler except mine had the gold wheels.It was just as hard to start.
its not sounded at carpurator was set up to optimal settings or you drive it in choke on.
Run good! 🤘
Je le veux ! Si trouve que sa marche pas assé..un moteur de moto cross 250 rentre ésément dedans
Switches it to reserve,I dunno what happened.
Movin' on up with the new drone. Another great video!
Do you torc them bolts to spec or just impact and go? I gotta know lol
hé men,what are you doing with someny bikes?
I think your supposed to tork down those bolts 🔩as well
I am 16 and seriously considering getting an apprenticeship at a mechanic shop and wanted to know what one of the biggest things you learned through your experiences about fixing engines?
By the way I liked your drone shots👍
I'll bet we never saw it again cause it blew up🤣