Elegoo Neptune 4 Pro - Klipper 3D Printer - Unbox & Setup
Вставка
- Опубліковано 7 вер 2023
- Amazon Links
Buy N4Pro here: geni.us/VdVsBS
Recommended: geni.us/JustVlads
Official: www.elegoo.com/products/elego...
Print volume 225*225*265mm
500 mm/s max printing speed
11 x 11 auto leveling
300°C high-temp nozzle
Support PLA/PETG/ABS/TPU/Nylon materials
USB and LAN transfer
Intelligent segmented heat bed
Pre-installed Klipper Firmware
The Neptune 4 Pro 3D printer is designed to be fast and efficient. It features a quiet Klipper motherboard and ARM 64-bit 1.5G main frequency quad-core processor for sufficient processing power, allowing it to print at a amazing speed of up to 500mm/s (recommended 250mm/s), and supports advanced functions like input shaping and pressure advance to achieve accurate and smooth models.
Dual-Gear Direct Drive Extruder
The dual-gear direct drive extruder with a 5.2:1 reduction ratio for smooth and consistent extrusion, combined with the copper-titanium bi-metal throat pipe and unique air duct design, improve heat dissipation and reduce nozzle clogging.
300°C High-temp Nozzle
With a high-temperature nozzle reaching 300°C, the printer can handle a wide range of filaments, including PLA, PETG, ABS, TPU, and high-temperature filaments like nylon. The extended hot end design ensures consistent heating and faster melting and extrusion, resulting in faster printing speed.
Intelligent Segmented Heatbed
With 100W+150W power output, the slicing software automatically recognizes the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120mmx120mm). The two partitions can also be turned on and off manually for more precise temperature control. Additionally, the surface of the PEI magnetic platform is marked for guidance.
Auto Bed Leveling + Auxiliary Leveling
With 121 (11x11) points auto bed leveling, you can achieve consistent and reliable prints every time without the need for manual bed leveling. Additionally, the auxiliary leveling by hand-twist knobs allows for further fine-tuning of the print bed's level for improved print quality.
Efficient Heat Dissipation
ELEGOO Neptune 4 Pro also features 2 thickened double-sided 4015 ball bearing cooling fans and 4x4020 ball bearing blower fans behind the print head for omnidirectional rapid cooling the newly printed layers to prevent warping and improve overall print quality even at a fast printing speed.
As an Amazon Associate I earn from qualifying purchases
Join Memberships to support this channel:
/ @justvlads - Наука та технологія
Literally the best startup video I have ever watched. You should be doing this for the manufacturers. Thanks for making this, it was a huge help!
I love these build vids by Just Vlad, he really puts thought into how he assembles the printers.
I just ordered one and this was the best video i have watched as to what i should expect when it arrives. Thanks for taking the time to put this together for us. 😊
Perfect timing! Just got one of them delivered today and set it up watching your vid. Little Buddha is printing right now. Thanks, man!
Thank you a million times over for doing this explainer video. I am new to 3D printing, and the tutorial video they offer just has music playing in the background, with no explanation. This is huge for me.
Pretty amazing how the falling price-point of technology continues to pull more people into the game. Not bad for an inexpensive entry. And I am quite satisfied with their low-cost filament for prototyping purposes. Elegoo seems to be satisfying its targeted market. Thanks for sharing this video.
I was talking with the guy who got me into 3d printing (only 7 or so years ago) and how much it has changed, as things have become more accessible and easier. Also how "influencers" have became prevalent. "Fans" of certain manufacturers that have popped up too.
I'm a fan of Elegoo, mostly because I'm a fan of the price point and that they seem to deliver the most you can get for the price point. I have had the Neptune 3 Pro, now have the Mars 4 Max and am about to get the Neptune 4 Pro. Good customer service too, which is important.
@@davedempsey5282 Just thought I'd ask, but how's your experience been with the 4 Pro so far? I'm about to pick one up myself and I'm torn between the size offered by the 4+ and the sturdier materials in the 4 Pro.
@@DigitalJedi Didn't get it. Got a Sovol SV06 Plus instead. But the best thing I have had is the Artillery Sidewinder X4 Plus. Wicked fast, klipper, big, rod supports, and rails. All there for $319 when I got mine, I think a bit more now.
@@davedempsey5282 Oh dang. What made you change your mind over the 4 Pro?
I can’t believe how helpful this video was! Thank you!!
61yo female here and I will say, it was very easy to set up. Of course watching your video helped a lot. Thanks 🙏
Hi @susan3156, how is your experience going with the Neptune 4 Pro now that it's 6 months later? Still working well for you?
This was great. Set my printer up using this video, and prints came out great from the start. Thank you!
Thank you very much Vlad for making this video. Incredibly helpful, especially for beginners.
i just ordered this printer and look forward to using it. i bought it with level expectations. i’m not expecting the very best like the bambu x-1c for my uses for it. i do scale radio control and make a few tools and stuff of my own design here and there and the quality doesn’t need to smooth as butter. it just needs to look 90% and it appears to do exactly that. super stoked to get it set up!
I found this resource excellent and really helped me in setting it up and getting started. Excellent job, thanks.
Very nicely done, helped me get started. Excellent job. Thank you!
Thank you so much for this Vlad!
I just bought me a Neptune 4 Plus and didn't even have to check the pdf. Did the whole setup through this video. And... The Buddha is printing! Thanks for this !!
Thanks! I have been watching this video all day. Its my first filament print and all ocurred very well.
ABS without an enclosure? That is pretty amazing. I am doing my first print on mine right now (tool holder) in PLA. I think I will try ASA at some point
G'day m8.....i just won a Choice of Neptune 4 Pro or a Mars 4 Ultra 9K from Elegoo for newyears. Ive gone with the Neptune as my main building is FDM based. Now i have a Ender 3 V2 (modded), a Kywoo Tycoon Max (soon to be slightly Modded) and recently before Xmas my Sunlu S4 Arrived From Kickstarter (an excellent dryer and will do any Filament of up to 4 rolls). and for xmas my fam got me the Elegoo Mercury X Bundle to go with my Nova3d Whale 2 4k Mid size MSLA Resin Printer. Cheers for this in-depth review of the Neptune 4 Pro. This helped me make my choice to go with the FDM. A big cheers from A M8 Downunder..(Australia)
Clean setup
Thinking about starting my way into 3D-Printing and this sounds like a pretty convincing product! And for under 300 bucks, it's still pretty affordable as well! :)
It's my first time getting one (Christmas). I feel stupid, not from the video, but by everything I don't know. If you find any useful tricks to design or finding g plans let me know.
I bought one - Speed and interest in klipper influenced my purchase. Waiting for mine to arrive today. Your videography and presentation is excellent. Been printing since 2016. Started with an Anet A8 I built and modded. This will be my fourth FDM printer. They keep getting better. Anet A8 -> Ender 3 -> Neptune 3 -> Neptune 4. I tried resin printing but found it too messy. I have been using Octopi for my past printers. No need with this.
GREAT REVIEW -Subscribed ! 5 / 5
It would've been nice to touch on the segmented heatbed, which is a feature the regular 4 doesn't have.
@Just Vlad Thank you for your video! Have you been able to get a stable profile for the Neptune 4 Pro in PrusaSlicer or OrcaSlicer?
Thanks for the tutorial:)
Mine will arrive today, im excited :D
how do you like it i am thinking of buying one for my first 3d printer
Great unboxing Vlad! Would you recommend Neptune 4 Pro over Anycubics Kobra 2 Pro?
What are your settings in cura for the ender 3 S1 pro I can't get my walls to do right I just now got the first layer somewhat good but when it comes to the walls it is like it raises to much
I really liked your video. Is it true that this printer tends to jam and that it is very difficult to unclog it? the other. Could you tell me about your experience with her? Does having a physical klipper make a big difference compared to the klipper that this printer uses?
So much help thank you so much
Hi Vlad, can I ask you a question? I want to buy my first fdm printer (have 2 sla’s) and I was thinking for the 4pro or the 3pro. I don’t need the speed that much. But the loudness is more of a problem as they stand to the other side of wall next to my head bord of the bed. I heard the 3pro is more quiet. But what are the best benefits of the 4pro (beside speed)
So which one would you suggest and why
Is there not the one-touch abl mode such as K1 and kobra2?
I love my Elegoo 3 Pro. The 4 does not use a generic nozzle so I am passing on this model. I like everything else about this printer.
How is a volcano nozzle not "generic" enough for you?
@@CapacitorCapacity To my knowledge it uses a proprietary nozzle that you can only get from Elegoo. You may wish to search Elegoo 4 replacement nozzles.
@@CapacitorCapacity the 4 doesnt use a generic volcano nozzle
3:20 - What kind of leveling probe is this? pressure? magnetic? vibration? pen? bending ? ...
Is the issue with spiral mode solved? Is it possible to load gcode at the USB-C or the micro.SD slot? It's because I would like to add a WiFi module at the other USB-type A-slot
the pause can how long? can pause off it and continue later?
i just ordered 1
My neptune 4 bed mesh is 11 on 11 points 😅.
Second think I have big issue with print ringing/ wobbling. I tried almost everything but still can't fix it.
Thank You for the video. Did you like the changes from the 4 to the 4 Pro? Do they really make the printer better?
It cant print round mechanical stuff so no its just a toy you have to sell cheaper then you bought it to get rid of it. Get resin printer instead
@@juliusvalentinasI’m sorry, you sound really stupid right now hating on FDM printers. I personally don’t want to deal with a resin printer myself.
- Smaller build volume most of the time.
- Too much wasted support material.
- Puts out VOCs and fumes, needs ventilation.
- Parts require post processing.
- Harder to use.
@@juliusvalentinasand what do you mean by it not being able to print “round mechanical parts”??? it can definitely print mechanical parts
16:28 Hi there, my y axis is very stiff, would this just be a lubricant issue where I just need to add a bit of oil to the rollers? It moves okay during printing but it’s so stiff I can’t move it by hand the way you do, please help. Thanks a lot
will u make a neptune 4 plus video and when? (pls do i need help)
@35:05 Im having trouble downloading the slicer. Is this on the Red USB?
Do you have cura profile for neptune 4 pro?
What model nozzle dose the machine use.
Great video. Thank you for that. My question is do you have to use Fast filament or can you work with regular PLA+?
Don’t know if you got a response but you can use regular PLA. Apparently the fast filament is just designed to work better when printing at higher speeds
I would advise against manually pushing filament in to purge the line. I've clogged a lot of nozzles on my Neptune 4 Pro doing that. Once I stopped, not a single clogged nozzle since. Otherwise great video.
One thing I have noticed is that when it goes to the center at 25:16, well, you can see that point is highly deviated from the center of the bed. Is it normal?
It is. It puts the magnetic sensor in the middle, not the nozzle. The magnetic sensor is at the back, at the extreme left side of who's looking at it.
Does this have a filament change feature?
Can we get links to mechanical models you printed
How is your CR6SE working for you?
Great review
Hello, where can I get the file for this white teddy bear to print on the Neptune 4 3D printer?
250mm/s ...260 bucks unreal. Bought my anycubic I3 Mega 5 years ago for $444. It still sitting on my desk and doing a blazing 60mm/s. Lol People getting in today will never know the struggle....
My Neptune 4 plus doesn't show my STLs just the folders how do I fix that?
Kind of odd none of the N4s that got sent to content creators have the ususal z-offset issue. Seems kind of shady on Elegoo's part.
does this all apply to the max?
Hello! First time buying a 3D printer for figures and different props, but also bigger stuff :) How would this compare to the Anycubic Kobra 2 Pro, is it better?
In general, many people say the Neptune has slightly better print quality most of the time. They are ultimately pretty similar machines, though. I went with the 4 Pro and I love it.
first layer not sticking after 10 prints?
Great video. Question: can you plug Ethernet port of Elegoo into laptop Ethernet port and have it work?
Found best solution for me was to get a WiFi extender from Amazon that has an ethernet port and then just plug ethernet cable from WiFi extender to Neptune 4 Pro.
Hi glad would you say the Neptune 4pro is better that the the Neptune 4 I am looking to get another printer and can’t decide I do hear the 4 is not as noisy because of the Pom wheels but my concern is more what one would be the better print quality
If this pro cant print working mechanical things then what non pro would look like
@@juliusvalentinasi still have no idea what you are on about for it “not being able to print mechanical parts” literally every printer can…
What kind of computer did you use?
where do i find files for that Teddy bear?
Followed your set up steps…great. Newbie 3D printer. Now just have to keep it away from husband who is a war gaming model painter…🙂 TY.
Just got one today. Mine seems to have 121 auto bed leveling points 😂. Must have been an update since release or its because it has an ethernet cable connected
That’s odd. In some UA-cam videos the bed of the 4 Pro is insulated and here in this video it’s not insulated. 😮
Hi. Can it also print small things? E.g. fonts on a scale of 1:87. Example: The word "Bahnhof" 15mm wide, 5mm high, 1mm deep. If that's possible, I'll buy it immediately
You can change the nozzle of "every" printer. For such little things I would try 0.2mm nozzle. I think it will do it very good. 0.4mm might work too. Details in prints are just depending on the settings. Even the kp3s for 130€ will do this just fine.
For such a scale I would recommend a resin printer, e.g., Elegoo Saturn.
that's already on the level of resin printers.
FDM's aren't designed for extremely small print with some VERY PRICEY EXCEPTIONS.
I suggest you get an FDM and a resin printer
sold!
My elegoo Neptune4 pro doesn't level well. I have version 1.94
😍
Does this printer have the ability to be able do multiple colors
no you would have to do a filament change yourself
So the only difference between the PRO and the normal is that the PRO comes with u-shaped metal guide rails for X and Y axis?
I mean the main difference, and the main selling point, is that the Pro comes with Klipper firmware for faster printing...
@@rijlqanturis625 The non pro version does come with Klipper too.
Hello, I am ne to the 3D printing I got an Elegoo Neptune 4 pro about 2 months ago and I did a new update for it from the Elegoo company and now my printer is not working properly. I am wondering if anyone has this printer and can help me out?
Hi We are in the same boat. Mine also is a non-start brick that I got in Jan. It quit working after a software "upgrade" that ended it's brief life after printing 2 models.
After 7 emails to elegooo I finally got a robot response and after 12 emails I got advise from them that did not work. Anyone want a brand new elegoo 4 pro that has a software glitch that sends it into a coma that they apparently cannot fix?
How about a little help- Elegoo
❤
Broo mine did like 121 points in automatic bed lvling
i printed everything that was on drive without a problem, and then a no sticking problem and i slowed travel speed and no stick
I am thinking of buying a 3d printer witch one should i buy Ender-3 s1 or Ender 3 V2 Neo please comment fast
How i put wifi? Can say the link?
ua-cam.com/video/wXD3EmKy3J4/v-deo.html
My neptune 4 pro has 126 points for bed leveling, I have the new firmware, 1.1.1.98 and ui 1.1.5
Me too
My elegoo Neptune4 pro doesn't level well. I have version 1.94
Isn't the USB cable irrelevant? The printer doesn't even have a printer port.
Comparing the 2, the N3 did a better job, but slower...
heyy I remember watching your vids as a kid! How is Marcus doing??
31 point leveling? Mine does 121 points
121 points leveling? Mine does 224 points
@@TheOldKenobi Not sure if trolling or being serious? I was being serious, even made me question things and I looked it up and it's supposed to be 121. Not sure why his says 31
Yes, mine does 121 as well. Perhaps he had an older firmware?@@Brandon-zw3hw
He probably gotta update the firmware to get the 121 point leveling as his is V1.0.1. Edit: Earlier units got 36 points ABL. He also says 36 points and it shows 36 in the upper left since it finishes there, you were probably looking at the upper right.
@@Brandon-zw3hwIt's Klipper dude you can do 1000 point leveling if you want.
Is this a sponsored review?
Did Elegoo provide the printer for you?
got nothing on Bambu
Seems better deal with flying bear 3d printer for same price
honestly bottom of that cube isnt looking the best. i wish you went deeper and calibrated e-steps and flow and then print again. because every 3d printer owner does those fine tunings before using the printer and therefore a review lacking these tunings is basically incomplete and pointless.
Well there is no e-steps to calibrate on a Klipper printer. It's rotation distance. And it isn't flow, it's pressure advance. Perhaps he isn't 100% on Klipper since it is new to many, but you obviously aren't familiar either.
As someone that struggles to put things together, I found this video insanely helpful for unboxing and assembly. I wouldn’t say this was useless at all
@@CapacitorCapacitybro got humbled. Key example why the gatekeepers of this hobby/field are so extreme and how easily they scare people off
@@superguy7285it’s not just this hobby full of gatekeepers photography is just the same, the know it all know nothing brigade speak a great photo but never go out and take any. This hobby is new to me and could easily be scared off by people like him if I did know better.
Too bad it still has manuel bed leveling
It's a budget printer, pretty much all of them still have manual leveling...
wdym?? it has automatic
@@zurabtsereteli9195 my mistake forgive me
I have a 4 Plus and its literally hot garbage, expect your extruder to have to be swapped out virtually every other print job. It will either stop extruding or create a blob of death. AVOID THESE PRINTERS!