After reading poorly written instruction that came with it and watching 20 different binding videos I was about to give up and send everything back. I gave your video a try even though it was on the bottom of my search results, 15 minutes into your video my mobula 6hd was up in the air flying with customized OSD and all my lite radio 2 se's AUX switches assigned to things I didn't know were available. Thank you for the clear and simple instructions, and your reassuring voice helped lower my blood pressure.
Love those two together...perfect for each other. However, mine developed a lag on the yaw control. I found a firmware update for the radio today and am going to try that, hopefully will fix it. Radio works very well for what it is and has surprisingly good range.
When mine was working, it was pretty good for the $40 I spent.. The gimble wires continued to break and like you, the pitch potentiometer started to go bad.. I got my money's worth though...🍻
Hello Everyone! Thank you for subscribing to my channel and giving your support and feedback.. Here we look at binding the Betafpv Lite to the Happymodel Mobula 6 Frsky Version. Lots of info here and I did my best to quickly go through it all. Note.. I have 2 other videos doing the same thing and I go into great detail in both. Enjoy the Breeze...👍🏻🍻👊🏻
Amazing. Way better than the poor instructions given with the product, and on par or better than most videos I see. It was slow enough to understand, went through things clearly.
Awesome 👏🏼 I didn’t know well I did just never realized the radio and quad was too close. It wouldn’t work. I was working on same quad for my friend. I told him it was junk because it would arm. Oops. I hope he digs it out the trash lol. I gotta make a phone call. Thanks for sharing 👍🏼👍🏼
Oh my.. lol yeah, would be the right thing to do. I have a super sensitive XM+ in my "SDMU138G4S5incher". I have to put it on a seperate table, but man, I get 99 RSSI way out.. Interesting story...👍🏻🍻👊🏻
Im using a betafpv literadio 2 se and I have a happymodel crux3, there is only a boot button on the flight controller and the button is broken, I've just gotten this quad and I can't get the crux3 to bind to it and i don't have a way to use betaflight
@propsoff there is no binding button, only a button that says boot, that one is broken Unfortunately. I've looked for another button that all the other similar flight controllers have, but I couldn't find another button, only the one that says boot below it
@propsoff it only has a boot button on the bottom left corner when flipped upside down. the flight controller says, X12 FR 2.1 on it, the pictures I've looked at for this drone had shown a boot button and a separate bind button, but this one only has a boot button, I've thoroughly searched the flight controller for another button that doesn't say boot underneath it but can't find it, I don't think it was designed with another button. Maybe I had gotten a defective drone? I'm confused as to why it doesn't have another button on the bottom or on top for binding
Can you do a video about after hooking up the drone to PC and the quad doesn't move on display screen when moving the drone physically. I've that issue with a 1S F4 AIO FC..
Go to the configuration tab in Betaflight and make sure the "Accelerometer" switch is enabled. There are 3 sliders. Accelerometer, Magnetometer, and Barometer.
@@propsoff wait. i spoke too soon.. my radio not detected in BetaFlight even after binding (i assume, LED light stopped pulsing as shown in your video). what could i missed? halp!
@@cheesehead4635 Battery low warning? 🤷♂️ The red light should flash 3 times for D8 mode. Then, it should go blue - I think. I haven't used the radio for a while, it's quality is just too poor to even sim. I have been recommending the Zorro. So far, the people that have switched, they are happy.
I've been looking for this video like thist but it was made after I gave up . But im tying again and I need to bind bind my mobula 6 to this exact radio. Buy it still don't turn solid after putting it in. Bind mode the radio and the quad. Sigh..
Do you happen to have the BetaFPV lite SE version of the radio? Mine is not the SE version in this video, however, I have a post in the description of this video where I have updated how to get the SE version of the radio to work with the D8 Built-in SPI receiver of the Mobula6. Does that make sense to you?
Do you happen to have the BetaFPV lite SE version of the radio? Mine is not the SE version in this video, however, I have a post in the description of this video where I have updated how to get the SE version of the radio to work with the D8 Built-in SPI receiver of the Mobula6. Does that make sense to you?
Got ya covered, go to the description of this video. The link will take you to HappyModel's website to the downloads. Make sure its the same flight controller...🍻 ua-cam.com/video/ADQwBIAP4Ao/v-deo.htmlsi=vIn3rc2Q75dKpTKA
my beta radio was bind with my cetus previously. How do I bind with this mobula6 now? I cant get into D8 mode and remote was not blinking like in the video. Pls help
@@chunkit78 I have not had luck with the SE version, personally. Many have reported back they purchased the Radiomaster Zorro because they never could get it to work. I have the Betafpv Lite 2 (not SE)...
@@propsoff I think i already bind them but the arm switch is not working. I have changed the radio to frsky d8 too. Also the beta flight configurator dont detect the controller. ua-cam.com/video/bShjoMlj9M4/v-deo.html
I have a lite radio, it seems that my mobula 6 is binding as the red light ends up solid. It will not arm/register on betaflight. Its connected but nothing works. I have everything set correctly on betaflight any ideas?
You have the Betafpv Lite radio, what version? Is it Frsky? Do you get the correct blinking lights for D8? Is your Mobula6 Frsky D8? Sorry for the questions, but many people have purchased the FLYSKY or Elrs version of the quadcopter or radio - they don't play well with each other..
@@propsoff Just a literadio older version but same at betafpv. Came with the tyro79s rtf kit. Radio is d16/d8. Mobula is also Frsky. Red light goes solid, binds, does its little flash then is solid after unplug and plug in. I tried d16 protocol aswell and changed it in betaflight. Im stumped, my guess is the radio but.
@@gabormihaly667 So, your unable to connect the quad to Betaflight because it doesn't recognize the Comport? Zadig.. There are links to driver fixers for Windows on the welcome page in the front left.. Also, insure your using a USB cable that can transfer data (not just charge).
@@propsoff Ok, I watched the video and I don't think that its the same problem. However I (I dont know how) fixed the problem. So now the drone automatically connects to the transmitter. So I looked on betaflight to check the switches and sticks and saw that nothing is reacting. Nothing is moving, just like the radio isnt connected. But he is because of the LED. Now I'm wondering how the radio can be connected to the drone while betaflight doesnt give any feedback from it. Do you have an idea how to fix it?
@@propsoff No, I dont have Facebook but I fixed the problem by changing the protocol to FrSky X LBT. Now working perfectly. I also tried Futaba - SFHSS which worked but the sticks were moving very slow and jumping back and forth... idk why Futaba and FrSky D8 arent working correctly at my radio - so weird. What ever, now its working with FrSky X LBT so its all great. Anyway thanks for your help and the quick answer.
@@ManualG6 That would be a wild guess for me, I'm unable to answer that question. I don't follow Betafpv due to the many issues I've personally had with their lite radio. I have the Zorro now.
I have a problem that when I try to bind my radio to the drone the light goes solid red, after unplugging it and plugging it back in the light flashes again, I cannot get this to bind. Can anyone help?
@@nonvertical9639 I have the 2 but there's an "SE" version I think, of the Lite2. I could NOT get a half dozen people fixed. Been very frustrating. Same issue, power off and nothing. I know 3 of those have reported they got the Radiomaster Zorro and are very happy. I am still looking at this issue on the back burner. There has to be a glitch in the protocol - sorry, I'm not a coder.. I will update the second I find an answer. I have abandoned my Lite 2 because the gimble wires constantly break..
Ok thanks, so i was wondering if the Literadio 2 se radio transmitter works with the mobula 6 and if so what protocol should i select when buying the radio. My question have dissaperd so ill try to send the links by them selves
After reading poorly written instruction that came with it and watching 20 different binding videos I was about to give up and send everything back. I gave your video a try even though it was on the bottom of my search results, 15 minutes into your video my mobula 6hd was up in the air flying with customized OSD and all my lite radio 2 se's AUX switches assigned to things I didn't know were available. Thank you for the clear and simple instructions, and your reassuring voice helped lower my blood pressure.
Your story has inspired me to continue...👍🏻🍻👊🏻
Same!
Love those two together...perfect for each other. However, mine developed a lag on the yaw control. I found a firmware update for the radio today and am going to try that, hopefully will fix it. Radio works very well for what it is and has surprisingly good range.
When mine was working, it was pretty good for the $40 I spent.. The gimble wires continued to break and like you, the pitch potentiometer started to go bad.. I got my money's worth though...🍻
this video help me so much as a beginner in fpv drone hobby ..
I appreciate your feedback, I'm glad it helped you...👍🏻🍻👊🏻
Hello Everyone! Thank you for subscribing to my channel and giving your support and feedback.. Here we look at binding the Betafpv Lite to the Happymodel Mobula 6 Frsky Version. Lots of info here and I did my best to quickly go through it all.
Note.. I have 2 other videos doing the same thing and I go into great detail in both. Enjoy the Breeze...👍🏻🍻👊🏻
Amazing. Way better than the poor instructions given with the product, and on par or better than most videos I see. It was slow enough to understand, went through things clearly.
I appreciate your support and encouragement...👍🏻🍻👊🏻
Awesome 👏🏼 I didn’t know well I did just never realized the radio and quad was too close. It wouldn’t work. I was working on same quad for my friend. I told him it was junk because it would arm. Oops. I hope he digs it out the trash lol. I gotta make a phone call. Thanks for sharing 👍🏼👍🏼
Oh my.. lol yeah, would be the right thing to do. I have a super sensitive XM+ in my "SDMU138G4S5incher". I have to put it on a seperate table, but man, I get 99 RSSI way out.. Interesting story...👍🏻🍻👊🏻
Spektrum is the same way on binding initially. You need to be several feet away or most likely it will fail.
my receiver won’t connect to the software when plugged in and also my mobdula is the one with like green frame is that ok
You're going to need to give me more to go on. Seems like your gear is not the same gear in this video. Be detailed of all components your using?....
Hi friend i have mobula7 hd 1s and literadio3 frsky i cant binding receiver. Drone on the led solid red but bot working drone could you help me ?
Is the Lite radio 3 ACCESS?
@@propsoff yes i am opening literadio3 receiver betafpv confugiration programs. İ can see working buttons and throthle on the screen
Im using a betafpv literadio 2 se and I have a happymodel crux3, there is only a boot button on the flight controller and the button is broken, I've just gotten this quad and I can't get the crux3 to bind to it and i don't have a way to use betaflight
Is the 2 tiny pads still there from where the bind button was? You can simply and carefully jump the 2 together with some metal tweezers...
@propsoff there is no binding button, only a button that says boot, that one is broken Unfortunately. I've looked for another button that all the other similar flight controllers have, but I couldn't find another button, only the one that says boot below it
@@IRONCaptainPanic
I thought the Crux3 has a Bind button between motor 3 and 4 connectors?
@propsoff it only has a boot button on the bottom left corner when flipped upside down. the flight controller says, X12 FR 2.1 on it, the pictures I've looked at for this drone had shown a boot button and a separate bind button, but this one only has a boot button, I've thoroughly searched the flight controller for another button that doesn't say boot underneath it but can't find it, I don't think it was designed with another button. Maybe I had gotten a defective drone? I'm confused as to why it doesn't have another button on the bottom or on top for binding
@IRONCaptainPanic
Interesting, I see now.. SPI built in Frsky.. Go to Betaflight CLI and type Bind_rx and click enter...
Can you do a video about after hooking up the drone to PC and the quad doesn't move on display screen when moving the drone physically.
I've that issue with a 1S F4 AIO FC..
Go to the configuration tab in Betaflight and make sure the "Accelerometer" switch is enabled. There are 3 sliders. Accelerometer, Magnetometer, and Barometer.
@@propsoffI have that enabled and it still doesn’t move on the screen
My exact setup! Thanks!!
My pleasure...🍻
@@propsoff wait. i spoke too soon.. my radio not detected in BetaFlight even after binding (i assume, LED light stopped pulsing as shown in your video). what could i missed? halp!
@@afie83
Is your radio the Betafpv Lite SE version?
If so, I put a "Note:" in the description just for those radios...
Do you need betaflight or can it bind and fly by just binding the drone and controller?
You will need Betaflight to set up the mode switching for arming.
Thanks. Everytime I reconnect the battery I'm still getting a pulsating red. Any ideas to why it isn't binding?
@@cheesehead4635
Battery low warning? 🤷♂️
The red light should flash 3 times for D8 mode. Then, it should go blue - I think. I haven't used the radio for a while, it's quality is just too poor to even sim. I have been recommending the Zorro. So far, the people that have switched, they are happy.
I've been looking for this video like thist but it was made after I gave up . But im tying again and I need to bind bind my mobula 6 to this exact radio. Buy it still don't turn solid after putting it in. Bind mode the radio and the quad. Sigh..
Do you happen to have the BetaFPV lite SE version of the radio? Mine is not the SE version in this video, however, I have a post in the description of this video where I have updated how to get the SE version of the radio to work with the D8 Built-in SPI receiver of the Mobula6. Does that make sense to you?
Do you happen to have the BetaFPV lite SE version of the radio? Mine is not the SE version in this video, however, I have a post in the description of this video where I have updated how to get the SE version of the radio to work with the D8 Built-in SPI receiver of the Mobula6. Does that make sense to you?
someone could diff all from the firmware of mobula 6? I didnt save mine and all settings are by default. thak you
Got ya covered, go to the description of this video. The link will take you to HappyModel's website to the downloads. Make sure its the same flight controller...🍻
ua-cam.com/video/ADQwBIAP4Ao/v-deo.htmlsi=vIn3rc2Q75dKpTKA
my beta radio was bind with my cetus previously. How do I bind with this mobula6 now? I cant get into D8 mode and remote was not blinking like in the video. Pls help
You can't get your Betafpv Lite into D8?
Do you have the Betafpv Lite 2 SE?
@@propsoff ya. Does it work with the quad?
@@chunkit78
I have not had luck with the SE version, personally. Many have reported back they purchased the Radiomaster Zorro because they never could get it to work. I have the Betafpv Lite 2 (not SE)...
@@propsoff I think i already bind them but the arm switch is not working.
I have changed the radio to frsky d8 too.
Also the beta flight configurator dont detect the controller. ua-cam.com/video/bShjoMlj9M4/v-deo.html
I have a lite radio, it seems that my mobula 6 is binding as the red light ends up solid. It will not arm/register on betaflight. Its connected but nothing works. I have everything set correctly on betaflight any ideas?
You have the Betafpv Lite radio, what version? Is it Frsky? Do you get the correct blinking lights for D8? Is your Mobula6 Frsky D8?
Sorry for the questions, but many people have purchased the FLYSKY or Elrs version of the quadcopter or radio - they don't play well with each other..
@@propsoff Just a literadio older version but same at betafpv. Came with the tyro79s rtf kit. Radio is d16/d8. Mobula is also Frsky. Red light goes solid, binds, does its little flash then is solid after unplug and plug in. I tried d16 protocol aswell and changed it in betaflight. Im stumped, my guess is the radio but.
@@maxpane657
Do you have Facebook?
Copy your last comment and past in a PM..
facebook.com/scooter.pie.100
@@maxpane657
Did you contact me on FB? I swear I seen something and it disappeared...🤷♂️
Mine does the same, even put a new board in it
Thank you!
My pleasure...🍻
failed to open serial port ... vote???? It doesn't work for me! What should I do to make it work???
Definitely need more information of the issue and on what device.
@@propsoff betaflight 10.9.0 version
@@propsoff does not work
@@gabormihaly667
So, your unable to connect the quad to Betaflight because it doesn't recognize the Comport? Zadig.. There are links to driver fixers for Windows on the welcome page in the front left.. Also, insure your using a USB cable that can transfer data (not just charge).
Thank you nice video
It connects perfectly but when I unplug and replug the Mobula, it don't binds automaticaly to the radio. Why is that?
I have one that does the same thing. Here's a video of it, could be the same problem!?
ua-cam.com/video/ADQwBIAP4Ao/v-deo.html
@@propsoff Thank you, gonna try it!
@@propsoff Ok, I watched the video and I don't think that its the same problem. However I (I dont know how) fixed the problem. So now the drone automatically connects to the transmitter. So I looked on betaflight to check the switches and sticks and saw that nothing is reacting. Nothing is moving, just like the radio isnt connected. But he is because of the LED. Now I'm wondering how the radio can be connected to the drone while betaflight doesnt give any feedback from it. Do you have an idea how to fix it?
@@itzmor185
Do you have FB?
Copy your last message and paste it in a PM...
facebook.com/scooter.pie.100
@@propsoff No, I dont have Facebook but I fixed the problem by changing the protocol to FrSky X LBT. Now working perfectly. I also tried Futaba - SFHSS which worked but the sticks were moving very slow and jumping back and forth... idk why Futaba and FrSky D8 arent working correctly at my radio - so weird. What ever, now its working with FrSky X LBT so its all great. Anyway thanks for your help and the quick answer.
If you have a mobula 6 IN ELRS and a betaFPV lite radio 3 in ELRS will they bind together
Yes, they need to be on the same version though.
Thank you If I bought the remote would come on the latest version
@@ManualG6
That would be a wild guess for me, I'm unable to answer that question. I don't follow Betafpv due to the many issues I've personally had with their lite radio. I have the Zorro now.
Is this the same for elsr
I don't see why not, I don't have these components - seems logical...🍻
I have a problem that when I try to bind my radio to the drone the light goes solid red, after unplugging it and plugging it back in the light flashes again, I cannot get this to bind. Can anyone help?
I am having the same issues. The bind seems to happen, but after unplugging it and plugging it in, it goes into bind mode....
Do you have the Betafpv Lite 3?
@@propsoff No I have the 2, is that the wrong one?
@@propsoff I have 2.0.1 for hardware and 2.0.2 for firmware
@@nonvertical9639
I have the 2 but there's an "SE" version I think, of the Lite2. I could NOT get a half dozen people fixed. Been very frustrating. Same issue, power off and nothing. I know 3 of those have reported they got the Radiomaster Zorro and are very happy. I am still looking at this issue on the back burner. There has to be a glitch in the protocol - sorry, I'm not a coder.. I will update the second I find an answer. I have abandoned my Lite 2 because the gimble wires constantly break..
Can you bind it after building a 5 inch?
Your asking if I would fly a 5 incher with this radio?
@@propsoff or just being able to bind it with one?
@@mandbfpv6432
I will consider that...
Do you have the lite2SE? OR do you have just the lite2?
@@propsoff I have the one that was in the video
@@mandbfpv6432
Mine is the Lite 2.
What receiver are you trying to bind to?
Do you still answer questions?
Of course...🍻
My UA-cam channel is part of my hobby and I enjoy helping and sharing my experiences...
Ok thanks, so i was wondering if the Literadio 2 se radio transmitter works with the mobula 6 and if so what protocol should i select when buying the radio.
My question have dissaperd so ill try to send the links by them selves
@@propsoff ok so i dont know Why but the links keep dissapering
@@viggojohansson9852
Have you purchased the Betafpv Lite SE yet?
@@viggojohansson9852
Yeah, UA-cam blocks links..
Its easier to contact me via Facebook Messenger....
facebook.com/scooter.pie.100?mibextid=ZbWKwL
noice
I think it is not what battery you buy but who you buy it from. This could have been in a warehouse for years.
Fact! Once I purchased lipos that had tarnish on the leads. Defiantly been around awhile..
Everyone who see this, follow him, he is taking his free time to help me so lets help him
Thank you nice video