Hi This video helped me alot. Thank you. Just one question. How do i or where do i controll the power of the laser. I have actually successfully 3ngraved using your method but is is to dqrk. And on some spots very very deep
Hi. Nice combination of CNC and Laser. Would you mind telling me which clamping system you are using for the workpiece (the blue screw on the right). Looks interesting.
I think I have a ground issue or something - because yes the laser sometimes lights when I jog - if I fiddle with the wires I can get it to stop so I have a bad connection somewhere or something
My links are to the laser itself, thanks for letting me know they were not working :) - I am using the Post Processor from here for Aspire jtechphotonics.com/?p=3851
Hi
This video helped me alot. Thank you. Just one question. How do i or where do i controll the power of the laser. I have actually successfully 3ngraved using your method but is is to dqrk. And on some spots very very deep
I struggled and struggled with that and eventually just bought an Ortur Laser and Lightburn :)
Hi. Nice combination of CNC and Laser. Would you mind telling me which clamping system you are using for the workpiece (the blue screw on the right). Looks interesting.
Thanks! The Kreg Dog Clamps are these - amzn.to/3ppIeai and the bench dogs are these - amzn.to/3puFgRW
@@JamiesHobbies-GGB Great, thanks!
what kind of clamping system do you have there?
They are called "Kreg In-Line" clamps
Very nice!! I would like to see your setup. I laser but do not know what the best way to set it up yet.
I am working on a video of my set up :) stay tuned
Thank you so much for this video :D.
You are welcome! :) Thanks for watching!
it looked like the laser was running while you jogged? is this true or just a camera issue?
I think I have a ground issue or something - because yes the laser sometimes lights when I jog - if I fiddle with the wires I can get it to stop so I have a bad connection somewhere or something
@@JamiesHobbies-GGB are your cables shielded?
@@andyreid7274 The motor wires for the CNC are, but not the laser control ones - but I've kinda moved on to a different laser set up anyway :)
Hi brother, can I use this postprocessor with victric Aspire 9??
I believe so - yes
Hi, where I get post proccesor "mach 3 laser ..." ? (when I am going to save file). Your links not working. Thank you
My links are to the laser itself, thanks for letting me know they were not working :) - I am using the Post Processor from here for Aspire jtechphotonics.com/?p=3851
@@JamiesHobbies-GGB , IT WORKED !!! Thank you so much.
@@gmopinillosvpinillos2827 Excellent! Glad you got it! :)