I know this video is almost a year old, and I'm a little late to the party,but I wanted to say thank you very much for posting it. I learned more watching this 12 minute video than I have in watching several others. I really like your presentation style. Using the screen-in-screen method to demonstrate exactly how you created the file, tiled it, saved it, then relocated your workpiece after cutting tile 1 really drove it home for me. Lots of presenters assume that their audience already knows about half of what they're demonstrating. Your style gets the info across without being condescending, nor making assumptions. Thank you very much for that.
Nice presentation. The only caution I would add is that by using a "guide" to maintain a constant X reference, you are relying on the edge of your material (not the guide) to be perfectly square the entire length of all the tiles. Any slight variation in the material is going to offset all the cuts between tiles by that amount. In a table leg cut out, it might be possible to sand out the "jog" that will appear at the edge of each tile. But on a carving, the jog will appear on every vector that crosses between tiles. Insuring that kind of 'squareness' is pretty hard to do even using a table saw with a cut that long and where you are relying on a high degree of accuracies on a complex CNC carvings across tiles. You can drill two "x" and "y" guide holes anywhere in the material and the spoil board as long as the "Y" is the same tile "Y" distance from the original origin. Then you are not relying on a perfectly square edge along the entire length of the material you are cutting. The dowels insure very high accuracy across all the tiles.
Did my first tiled carve tonight and your indexing method worked great. Every other video shows you how to use the software, but yours was the only one with the practical information on how to actually run the carve. Thanks.
If your stock does not have a straight side and you don't mind drilling into your spoilboard you can use two reference holes in the part and matching ones in the spoil board, then insert dowel pins before clamping.
Many thanks ! You do a lot of work for us by creating this great footage, dear Peter! since not everyone has the courage to try something new, I mean: you have to do your scout work! Happy new Year 2020 ! ........................................................... Now in German: Danke vielmals ! Du nimmt uns eine Menge Arbeit ab, in dem Du dieses tolle Filmmaterial zur Schau erstellst lieber Peter ! Da nicht jeder den Mut hat, um etwas Neues zu auszuprobieren, meine ich: man muss deine Pfadfinder Arbeit hoch rechnen ! .......................Frohes neues Jahr 2020
Excellent video, Peter. I like the way you slowly explain what you're doing. Most videos are done at normal talking speed, and if it's a subject that's brand new to people, they can't keep up usually. Thanks.
gasp... I finally understand how to use the reference marker now! I have a higher level of confidence to make the sign for my friend now. Thank you Peter.
I read the Vectric site and it spoke of your 'hybrid'. This is why yours looked odd to me. BTW, I'm down sizing from a 48"x48" which has too large a footprint for me now. And with 'tiling' it doesn't really matter. Thanks. Peter
Vcarve and the other programs they make are top notch and worth every penny they ask for them. Unfortunately they cost more than the machine I plan on building. Which given my wife's upcoming surgery I now can't afford anyway. So please make more videos because I love watching them and dreaming about making my own someday. Cheers.
Just seen this tiling video and I am happy I did!!! It was very clear and easy to understand!!! I do like your machine, did you do any videos about your build please?
Glad it helped. The Machine is a modified Joes Hybrid. www.joescnc.com. If you look through my videos you will see new carriage builds I made to the X,Y & Z axis but there are no plans. Cheers Peter
As usual Peter I find your video's fantastic and much better than reading the vectric help file. Now to cut a 119" X 46" sign on my joe's 4X4 Cheers... Rick Hubka from Joe's CNC forum
If you know Code, You can draw each half with any cad program. Offset the 2nd file. Modify the G-Code to lift the Z at the end cut. That's how I do it. Still use a Ref. hole.
that was one thing i was wondering about too , and the reason i was planning to make my machine a lot wider compared to its length, i want to be able to slide a full sheet of ply underneath the machine and cut it in stages , the shorter machine only takes in the extra work space when its needed nice to see its reasonably simple to do in VCarvePro , seen someone do some relief cutting with the program too (routing a babyphoto into a block of wood )..... yet another thing to check out
Hmmm, before I found your Excellent work, I had an idea to drill two locator holes STRADDLING the interface edge between a fixed reference and the workpiece: half in each, the Perfect (calculated) distance apart. Then, when time to move, I'd slide the workpiece along the fixed reference using, as you did, a cutter bit for the alignment. I've done that eyeballing/rotating thing, but was always worried that I was stressing the bit/adding error. My particular problem is a large topo map that has to match up on X, Y, AND Z along the boundary. Thank you. Agree with the others: you're a natural teacher.
thank you peter for upload this video. I use it on my cnc router to cut out a larger piece than the cnc wide. and it works very well. Thank you for that.
Very helpful! I need to surface a 54" long slab on a 48" machine, and if I mount the slab on a sled, I can drill the hole in the sled and run the T1 surfacing toolpath, and then move the sled further down the table to run the T2 surfacing toolpath. Flip the slab on the sled, re-mount it, and do it all again!
Tom Yost Thanks Tom. I have been having a break while I get some thing s sorted but I hope to get back to making some new videos in the near future. Cheers Peter
Good Grief.. I can't believe I've been cutting two separate pieces then gluing them together to make up a part that is longer than my router table. I'm not sure how I missed this function of vCarve. Thanks for the video!
im starting to think that i need to learn vectric aspire more..it seems to be a very good program and has many capabilities....i believe i have vcarve pro built into aspire
I normally use two holes as far away from each other as is convenient, as datums. A nicely presented explanation, thanks for posting. So much better than that stupid post from Vectric. Like we have machines that are going to regularly do jobs bigger than the machine both in X & in Y.
Hi Peter, Thanks so much for the videos. I actually had been thinking about this very thing, cutting pieces larger than the table itself (the table I hope to be getting soon :) ). My thoughts were nearly spot on with your video and it was really great to be able to see this technique used. I have Subscribed to your channel and look forward to watching more of them.
Vectric VCP version 11: Peter this technique finally caught up with me at 81 years old. Thanks for your video. I have a project to make a 88” diameter ring that is 6” wide, it will be in six sections. My CNC cut area is X 48” and Y 37”. This is cut out of sections of 4x8’ 3/4” plywood. I am arranging four sections in the first of two tile cut, then move the material in the Y direction and finish the cut. In your example you cut one piece in one file using one index hole. Could I highlight all four pieces and just use one hole and cut the four lower sections then move to the the index hole and finish the upper sections, all in one file? Is my assumption correct?
'+TheGeekPub It is quite a while since I did this video and can see why you are asking because it does look like there is a gap but it is an optical illusion. I noticed when I put my arm across to turn off the router the shadow cast by my arm made one of the gaps disappear for an instant. I also see that when I removed the part I can see the holding tabs but no evidence of an uncut section. I also mentioned that you can barely see the join of the 2 cuts. When tiling there is no gap unless the registration between the 1st and 2nd cut is wrong. Cheers Peter
Could you after setting the router to X0 Y0 mover the router X40 Y0 and make a lower index hole, then make the mid index hole at x40 Y700, next cut the T1 part. Next move the stock and place the lower pin in the mid index hole, secure clamp and cut T2. Is this correct?. This is my first try at Tiling. Thanks Peter HH
This was great overview of tiling, both from a software and execution of the project. Thanks I have a project that is 16x48 but my material is not square. I am using live edge pine. Any comments on how I can manage the physical transition between tiles. Thank you
@@cncnutz Hi Peter - thank you for the response. What i ended up doing was drilling two holes and used them to square up the stock.. it seemed to work pretty good.
Thanks for the useful video. A question - for the reference hole, would there be any accuracy benefit to drilling it through the workpiece and into the wasteboard, then using a dowel for alignment after, rather than eyeballing the bit into the reference hole?
There is no eyeballing the cutter into the hole. It is a matter of leaving the material loose and putting it onto the cutter then aligning the sides by feel which is very accurate over the long distance. I think if you do it right there is no advantage to drilling holes into your table. Cheers Peter
yep..i just tried it in vectric aspire and its exactly as your version...very good handy feature...may use it one day to do a long sign etc....so does the tile feature basically break up the large projects into smaller sections that are each individual of each other but when tied together they crate the 1 large project?
Hi Peter, All you video's are good. When I get done fixing the poor workmanship on the machine I got, I will start putting you video's to good use. A spin off to Littlestworkshop is to make some special hold down claps with pins on the bottom. You have them set so that when you take them off or on they are to a fixed point X,Y. With two of them spaced out on you table you can step you work down the table. Just a thought.
Thanks for watching. The router speed control is called a SuperPID. You can watch my SuperPID video here Install and Test of Super-PID 2048.avi Here is my pendant video. Others have tried it and have had problems so it is now unlisted as I do not want to lead others astray. That said, mine has worked well for almost 3 years. I bought it off Ebay for about $40 making them really cheap compared to other pendants. I leave it to you to make up your own mind on whether it is worth it. Mach 3 Pendant Review Cheers Peter
hi there...thanks for this tutorial. It'll be my inspiration for cutting out a welcome sign 1,5 m x 25 cm on my small C-beam machine. ( a 5 tile project) I like the idea of placing a reference hole...
Hey Peter, Merry Christmas to you and your family. Love all your videos and have learned so much from you, thanks again. I do have a question for you, when you move your piece to the new spot like in your video x40 y0 to set it up, is that also the new zero xy spot? Thanks again and Good Bless.
No it remains X40 Y0. It was X40 Y700 so the hole coordinate changes but you do not change the DRO's or zero any axis. Hope that makes sense. Merry Christmas Peter
It is the trunk of a Truffula tree. I made the tree and a few Lorax characters for my niece on here first birthday. The tree trunk is used as a growth chart with the whole set up about 6 foot tall. I wanted to make something different from the usual giraffe. The tree allowed me to make everything in pieces and gave me a more 3D wall decoration. Here is the result www.dropbox.com/s/pkbwhigb5si6c9p/Lorax2.jpg Cheers Peter
Hi Actually, i wonder, if you cannot have space to pull foward the material : Can it be possible to rotate it and set somehow the rest of the cutting ... in reverse ? Thanks a lot
yeah it basically allows you to create basically unlimited length projects :)..and not have to have a $20,000 cnc machine to do it........great feature..thank you for the video....
Hi I just watched you video here and it was great .Thanks I am in need of a video on tiling. Question though the hold downs you use in your video I guess you made them. Do you have a video on them.? if so where can I find it Thanks Jeff
I did some videos on my hold downs 4 years ago in episodes 90 & 91. ua-cam.com/video/wKiPfaA2oZY/v-deo.html ua-cam.com/video/RESF53ltsO0/v-deo.html Cheers Peter
Hi Kevin, The machine is a homemade Joes NC Hybrid. It is rack and pinion drive which is where it gets its speed. The original build was leadscrew and topped out about the 40ipm mark but upgrade to R&P and it idles at 100ipm. The limiting factor now is how fast the router can cut the material not how fast the machine can run. Interestingly the machine still uses the same 270ozin motors I bought for my first large machine years ago but upgradeing the driver to a G540 and then the R&P really changed how things work. Cheers Peter
so using the tile toolpath function actually creates multiple separate program/toolpaths/gcode files?.......it doesnt create 1 program/gcode file that is broken into multiple segments?
Cool thanks for that I have turned work down because my machine wasn’t big enough will try that out later on some scrap my machine is 1000x 1500 So I have a working area of around 850 x 1300 as long as I can support the work sticking out skys the limit lol
Hey Peter, when using the tiling feature on my Shark hd3 I keep having a problem with the tiling feature. While using the tiling function the Second tiled part is about 1/16-1/8 off from the first piece. Any suggestions?
I have no idea Abdul other than the obvious that you are doing something wrong. 😉 Without seeing exactly what you are doing from beginning to end I have no way of knowing. Sorry I can't be much help Cheers Peter
I realize this is an old video but what if you had to flip your work piece and cut it because it was too long to just move up would it be possible to do that
No. To cut a peice longer than the table you need to use tiling as shown in this video. Tiling toolpaths are special in that it creates incomplet toolpaths. The long piece needs to be cut with 2 incomplete toolpaths with the 2nd toolpath completing the cut. In the train project which i assume you saw earlier I was cutting a complete pieces. Don't know if it makes sense but flipping will not work for cutting a piece longer than the table. It will work for cutting matrial longer than the table. cheers Peter
Thanks for the video... I'm trying to cut a simple slot in a long plywood shelf for a standard. I followed your directions and when previewing the tool path it looks right, but when I machine it the 2nd part - it doesn't line up with the first one - off by 1/8" or more. I'm using Aspire. I have a link to the photo here: www.dropbox.com/s/qyzb6bsr7wcp8l8/IMG_7315.JPG?dl=0 Any idea why its not lining up? I even have a fence/rail to guide it the fun length and marked the ends to be sure they are consistent (not out of angle, etc). Thanks so much for the help!
Hi Brian, Run your cutter down the length of the Y axis and check that your reference edge is parallel. You might find you have 1/8 runout on the edge. If you reference edge is not parallel you will get the shift you are seeing. Cheers Peter
I know this video is almost a year old, and I'm a little late to the party,but I wanted to say thank you very much for posting it. I learned more watching this 12 minute video than I have in watching several others. I really like your presentation style. Using the screen-in-screen method to demonstrate exactly how you created the file, tiled it, saved it, then relocated your workpiece after cutting tile 1 really drove it home for me. Lots of presenters assume that their audience already knows about half of what they're demonstrating. Your style gets the info across without being condescending, nor making assumptions. Thank you very much for that.
I was sure this was a simple concept... just needed someone to show me just how simple it was. Thank you!
Nice presentation. The only caution I would add is that by using a "guide" to maintain a constant X reference, you are relying on the edge of your material (not the guide) to be perfectly square the entire length of all the tiles. Any slight variation in the material is going to offset all the cuts between tiles by that amount. In a table leg cut out, it might be possible to sand out the "jog" that will appear at the edge of each tile. But on a carving, the jog will appear on every vector that crosses between tiles. Insuring that kind of 'squareness' is pretty hard to do even using a table saw with a cut that long and where you are relying on a high degree of accuracies on a complex CNC carvings across tiles. You can drill two "x" and "y" guide holes anywhere in the material and the spoil board as long as the "Y" is the same tile "Y" distance from the original origin. Then you are not relying on a perfectly square edge along the entire length of the material you are cutting. The dowels insure very high accuracy across all the tiles.
Always the best cnc videos. Its one thing to read about a process, another to watch it being performed with clear, concise explanation. Thanks
Thanks Butch
I've watched a number of videos, this is by far the easiest to understand, thank you !
Thanks dad7256
Peter I carved the Mississippi River around New Orleans La. it was 81" long and it came out wonderful. Thanks again.
That sounds great. Do you have a photo of it? I would really like to see it.
Cheers
Peter
Did my first tiled carve tonight and your indexing method worked great. Every other video shows you how to use the software, but yours was the only one with the practical information on how to actually run the carve. Thanks.
If your stock does not have a straight side and you don't mind drilling into your spoilboard you can use two reference holes in the part and matching ones in the spoil board, then insert dowel pins before clamping.
Many thanks ! You do a lot of work for us by creating this great footage, dear Peter!
since not everyone has the courage to try something new, I mean: you have to do your scout work!
Happy new Year 2020 !
........................................................... Now in German:
Danke vielmals ! Du nimmt uns eine Menge Arbeit ab, in dem Du dieses tolle Filmmaterial zur Schau erstellst lieber Peter !
Da nicht jeder den Mut hat, um etwas Neues zu auszuprobieren, meine ich: man muss deine Pfadfinder Arbeit hoch rechnen ! .......................Frohes neues Jahr 2020
Thanks Superabbas much appreciated.
Cheers
Peter
Nice simple demonstration of tiling to overcome bed length vs object dimension.
Excellent video, Peter. I like the way you slowly explain what you're doing. Most videos are done at normal talking speed, and if it's a subject that's brand new to people, they can't keep up usually. Thanks.
+Jim Hester
Thanks Jim.
A newbie here that was struggling on what size of a machine to buy. This proved to be the answer to my problem.
+David Crook
Glad it helps.
Cheers
Peter
gasp... I finally understand how to use the reference marker now! I have a higher level of confidence to make the sign for my friend now. Thank you Peter.
Thank You Peter for the very comprehensive video.
Thanks
Great video Peter. Your technique is far superior to the others that I have seen.
Thanks Jeff. I like to keep things simple and this was the simplest way I could come up with.
Cheers
Peter
Thanks, Peter for the clear instruction on the how and why. I’ll be using this on my router for my long langstroth beehives. Cheers.
Thanks Mike. Sounds like an interesting project.
Cheers
Peter
The best cnc instruction on UA-cam . Thanks for taking the time to put your channel y
I read the Vectric site and it spoke of your 'hybrid'. This is why yours looked odd to me. BTW, I'm down sizing from a 48"x48" which has too large a footprint for me now. And with 'tiling' it doesn't really matter. Thanks. Peter
Vcarve and the other programs they make are top notch and worth every penny they ask for them. Unfortunately they cost more than the machine I plan on building. Which given my wife's upcoming surgery I now can't afford anyway. So please make more videos because I love watching them and dreaming about making my own someday. Cheers.
Just seen this tiling video and I am happy I did!!! It was very clear and easy to understand!!! I do like your machine, did you do any videos about your build please?
Glad it helped.
The Machine is a modified Joes Hybrid. www.joescnc.com.
If you look through my videos you will see new carriage builds I made to the X,Y & Z axis but there are no plans.
Cheers Peter
As usual Peter I find your video's fantastic and much better than reading the vectric help file.
Now to cut a 119" X 46" sign on my joe's 4X4
Cheers... Rick Hubka from Joe's CNC forum
Thanks Rick.
Like you I would rather watch how to do it than sit about reading.
Cheers
Peter
Thanks for taking the time to make these great videos... always easy to understand and very informative.
If you know Code, You can draw each half with any cad program. Offset the 2nd file. Modify the G-Code to lift the Z at the end cut. That's how I do it. Still use a Ref. hole.
Thanks Peter!! Another outstanding video!!! Keep em coming buddy!
that was one thing i was wondering about too , and the reason i was planning to make my machine a lot wider compared to its length, i want to be able to slide a full sheet of ply underneath the machine and cut it in stages , the shorter machine only takes in the extra work space when its needed
nice to see its reasonably simple to do in VCarvePro , seen someone do some relief cutting with the program too (routing a babyphoto into a block of wood )..... yet another thing to check out
Hmmm, before I found your Excellent work, I had an idea to drill two locator holes STRADDLING the interface edge between a fixed reference and the workpiece: half in each, the Perfect (calculated) distance apart. Then, when time to move, I'd slide the workpiece along the fixed reference using, as you did, a cutter bit for the alignment. I've done that eyeballing/rotating thing, but was always worried that I was stressing the bit/adding error. My particular problem is a large topo map that has to match up on X, Y, AND Z along the boundary.
Thank you. Agree with the others: you're a natural teacher.
+duubtuub
Thanks duubtuub
thank you peter for upload this video. I use it on my cnc router to cut out a larger piece than the cnc wide. and it works very well. Thank you for that.
+Johan Westdijk
Good to hear Johan.
Cheers
Peter
Very helpful! I need to surface a 54" long slab on a 48" machine, and if I mount the slab on a sled, I can drill the hole in the sled and run the T1 surfacing toolpath, and then move the sled further down the table to run the T2 surfacing toolpath. Flip the slab on the sled, re-mount it, and do it all again!
Thanks Rick
Very clear video. Thank you. Hoping for more videos/classes.
Tom Yost Thanks Tom. I have been having a break while I get some thing s sorted but I hope to get back to making some new videos in the near future.
Cheers
Peter
Good Grief.. I can't believe I've been cutting two separate pieces then gluing them together to make up a part that is longer than my router table. I'm not sure how I missed this function of vCarve. Thanks for the video!
Well explained. Even I could understand that. Thanks for sharing. Subscribed.
Glad it helps
Cheers Peter
THATS AWESOME, I knew you could do that I just didn't know HOW until now! THANK YOU!
wow Very very good explanation. I also do see how to work out the tabs to keep the cutoff. pretty great to do multicut over long part.
im starting to think that i need to learn vectric aspire more..it seems to be a very good program and has many capabilities....i believe i have vcarve pro built into aspire
I normally use two holes as far away from each other as is convenient, as datums. A nicely presented explanation, thanks for posting. So much better than that stupid post from Vectric. Like we have machines that are going to regularly do jobs bigger than the machine both in X & in Y.
Thanks Skysurfer.
Fantastic video; thank you for sharing this!
Thanks Nathan
Greetings Peter,
After you align with the hole in T2 do you rehome x and y?
LeRoy
Hi Peter, Thanks so much for the videos. I actually had been thinking about this very thing, cutting pieces larger than the table itself (the table I hope to be getting soon :) ). My thoughts were nearly spot on with your video and it was really great to be able to see this technique used. I have Subscribed to your channel and look forward to watching more of them.
Thanks David, Glad it helps.
Cheers
Peter
So well explained ! Thanks 🙏
Vectric VCP version 11:
Peter this technique finally caught up with me at 81 years old. Thanks for your video. I have a project to make a 88” diameter ring that is 6” wide, it will be in six sections. My CNC cut area is X 48” and Y 37”. This is cut out of sections of 4x8’ 3/4” plywood. I am arranging four sections in the first of two tile cut, then move the material in the Y direction and finish the cut.
In your example you cut one piece in one file using one index hole. Could I highlight all four pieces and just use one hole and cut the four lower sections then move to the the index hole and finish the upper sections, all in one file? Is my assumption correct?
Thanks for making this simple, I was wondering how to index the tiles!!
Glad it helps John.
Cheers Peter
Hello to you, thanks for filming that..very helpful.
So you’re zero point is dead on the bottom left hand corner?
Yes, that's correct.
thank you- the reference hole what I was looking for- Vetric should incorporate this into there tutorials
Sometimes it the simple thing that makes all the difference.
Cheers
Peter
It looks like it didn't cut any material at the tile joint about 1/4" long or am I just seeing it wrong?
'+TheGeekPub
It is quite a while since I did this video and can see why you are asking because it does look like there is a gap but it is an optical illusion. I noticed when I put my arm across to turn off the router the shadow cast by my arm made one of the gaps disappear for an instant. I also see that when I removed the part I can see the holding tabs but no evidence of an uncut section. I also mentioned that you can barely see the join of the 2 cuts. When tiling there is no gap unless the registration between the 1st and 2nd cut is wrong.
Cheers
Peter
Hello Paul,
I always love your video's.
Scott
Could you after setting the router to X0 Y0 mover the router X40 Y0 and make a lower index hole, then make the mid index hole at x40 Y700, next cut the T1 part.
Next move the stock and place the lower pin in the mid index hole, secure clamp and cut T2.
Is this correct?. This is my first try at Tiling.
Thanks Peter HH
This was great overview of tiling, both from a software and execution of the project. Thanks
I have a project that is 16x48 but my material is not square. I am using live edge pine.
Any comments on how I can manage the physical transition between tiles.
Thank you
Can you attach a temporary straight edge to the stock while you cut it.?
Cheers
Peter
@@cncnutz Hi Peter - thank you for the response. What i ended up doing was drilling two holes and used them to square up the stock.. it seemed to work pretty good.
@@brianyoung3124 Glad you got it sorted.
Cheers
Peter
Thanks for the useful video. A question - for the reference hole, would there be any accuracy benefit to drilling it through the workpiece and into the wasteboard, then using a dowel for alignment after, rather than eyeballing the bit into the reference hole?
There is no eyeballing the cutter into the hole. It is a matter of leaving the material loose and putting it onto the cutter then aligning the sides by feel which is very accurate over the long distance. I think if you do it right there is no advantage to drilling holes into your table.
Cheers
Peter
Thank you
yep..i just tried it in vectric aspire and its exactly as your version...very good handy feature...may use it one day to do a long sign etc....so does the tile feature basically break up the large projects into smaller sections that are each individual of each other but when tied together they crate the 1 large project?
It basically cuts up the project into smaller bits so you can do that part and move onto the next.
Hi Peter, All you video's are good. When I get done fixing the poor workmanship on the machine I got, I will start putting you video's to good use.
A spin off to Littlestworkshop is to make some special hold down claps with pins on the bottom. You have them set so that when you take them off or on they are to a fixed point X,Y. With two of them spaced out on you table you can step you work down the table.
Just a thought.
Great video, keep them coming. If I can ask what are you using for the speed control on your router and also what pendent are you using?
Thanks for watching.
The router speed control is called a SuperPID.
You can watch my SuperPID video here
Install and Test of Super-PID 2048.avi
Here is my pendant video.
Others have tried it and have had problems so it is now unlisted as I do not want to lead others astray.
That said, mine has worked well for almost 3 years. I bought it off Ebay for about $40 making them really cheap compared to other pendants. I leave it to you to make up your own mind on whether it is worth it.
Mach 3 Pendant Review
Cheers
Peter
i can use this feature when i decide to make a long 1.5meter welcome sign for house..it should work out great
hi there...thanks for this tutorial.
It'll be my inspiration for cutting out a welcome sign 1,5 m x 25 cm on my small C-beam machine. ( a 5 tile project)
I like the idea of placing a reference hole...
Thanks 3Dhubb.
The longest one I did was 3.6m
I don't plan on doing that again in a hurry.
Cheers
Peter
Very helpful video , thank you!!
Thanks, Glad it helped.
Cheers Peter
Hey Peter,
Merry Christmas to you and your family.
Love all your videos and have learned so much from you, thanks again.
I do have a question for you, when you move your piece to the new spot like in your video x40 y0 to set it up, is that also the new zero xy spot?
Thanks again and Good Bless.
No it remains X40 Y0. It was X40 Y700 so the hole coordinate changes but you do not change the DRO's or zero any axis.
Hope that makes sense.
Merry Christmas
Peter
@@cncnutz Thank you very much Peter.
I appreciate it.
Again, Merry Christmas and God Bless
is the tile feature used for what you used it for or does it have another purpose?
Excellent video. Enjoyed it.
That's about how I did the 1'000mm Side Skirts for my X-Carve with it's working area of about 790mm x 790mm =)
+Duraltia
Excellent. Tiling sure makes this type of thing easy.
Cheers
Peter
Good info, very useful. Just curious: what is the part for?
It is the trunk of a Truffula tree.
I made the tree and a few Lorax characters for my niece on here first birthday.
The tree trunk is used as a growth chart with the whole set up about 6 foot tall.
I wanted to make something different from the usual giraffe.
The tree allowed me to make everything in pieces and gave me a more 3D wall decoration.
Here is the result
www.dropbox.com/s/pkbwhigb5si6c9p/Lorax2.jpg
Cheers
Peter
Hi Actually, i wonder, if you cannot have space to pull foward the material : Can it be possible to rotate it and set somehow the rest of the cutting ... in reverse ? Thanks a lot
Exactly how you would go about doing it with tiling I would have no idea.
Cheers
Peter
yeah it basically allows you to create basically unlimited length projects :)..and not have to have a $20,000 cnc machine to do it........great feature..thank you for the video....
Can this be done in vectric aspire too?....this is a great technique
It certainly can. I used VCarve Pro which is a subset of Aspire.
Cheers
Peter
Hi I just watched you video here and it was great .Thanks I am in need of a video on tiling.
Question though the hold downs you use in your video I guess you made them. Do you have a video on them.? if so where can I find it
Thanks Jeff
I did some videos on my hold downs 4 years ago in episodes 90 & 91.
ua-cam.com/video/wKiPfaA2oZY/v-deo.html
ua-cam.com/video/RESF53ltsO0/v-deo.html
Cheers
Peter
I like those clamps can you tell me where I can find them please?
You make them yourself. See episodes 90 & 91
Cheers
Peter
ua-cam.com/video/wKiPfaA2oZY/v-deo.html
ua-cam.com/video/RESF53ltsO0/v-deo.html
Great Video... I am curious what CNC machine you have. It moves a lot faster than mine!
Hi Kevin,
The machine is a homemade Joes NC Hybrid. It is rack and pinion drive which is where it gets its speed. The original build was leadscrew and topped out about the 40ipm mark but upgrade to R&P and it idles at 100ipm. The limiting factor now is how fast the router can cut the material not how fast the machine can run. Interestingly the machine still uses the same 270ozin motors I bought for my first large machine years ago but upgradeing the driver to a G540 and then the R&P really changed how things work.
Cheers
Peter
Outstanding work mate... love it. Your video was very helpful and well made. I applied your process to making a nice chair for a client. Thanks again!
Very nice! Thank you so much this is a big help!
Your welcome Tim.
Glad the video helps
Cheers
Peter
Thanks for the video. Nice Job!
two or three holes might have been more reassuring
Great info buddy..
so using the tile toolpath function actually creates multiple separate program/toolpaths/gcode files?.......it doesnt create 1 program/gcode file that is broken into multiple segments?
Correct.
Cool thanks for that I have turned work down because my machine wasn’t big enough will try that out later on some scrap my machine is 1000x 1500
So I have a working area of around 850 x 1300 as long as I can support the work sticking out skys the limit lol
Great video, thanks.
Thanks Robert
Whoops. Hit enter too soon. ...putting them together
Thanks! Your video was very helpful!
+David Williams
Glad it helps out.
Cheers
Peter
Hey Peter, when using the tiling feature on my Shark hd3 I keep having a problem with the tiling feature. While using the tiling function the Second tiled part is about 1/16-1/8 off from the first piece. Any suggestions?
I have no idea Abdul other than the obvious that you are doing something wrong. 😉 Without seeing exactly what you are doing from beginning to end I have no way of knowing. Sorry I can't be much help
Cheers
Peter
I realize this is an old video but what if you had to flip your work piece and cut it because it was too long to just move up would it be possible to do that
No.
To cut a peice longer than the table you need to use tiling as shown in this video. Tiling toolpaths are special in that it creates incomplet toolpaths. The long piece needs to be cut with 2 incomplete toolpaths with the 2nd toolpath completing the cut. In the train project which i assume you saw earlier I was cutting a complete pieces. Don't know if it makes sense but flipping will not work for cutting a piece longer than the table. It will work for cutting matrial longer than the table.
cheers
Peter
CNCnutz (Peter Passuello) maby I should have said spin but I can not slide it through because the wall is in the way
My table has wheels at the back so I can pull the table forward if I need to machine longer material. The longest I have done is 3.6 metres (12 foot).
NICE TUTURIAL!!
Thanks. Glad it helps out.
Cheers
Peter
Awesome
Thanks Henry
Great vid.. thanks
Thanks for the video... I'm trying to cut a simple slot in a long plywood shelf for a standard. I followed your directions and when previewing the tool path it looks right, but when I machine it the 2nd part - it doesn't line up with the first one - off by 1/8" or more. I'm using Aspire. I have a link to the photo here: www.dropbox.com/s/qyzb6bsr7wcp8l8/IMG_7315.JPG?dl=0 Any idea why its not lining up? I even have a fence/rail to guide it the fun length and marked the ends to be sure they are consistent (not out of angle, etc). Thanks so much for the help!
Hi Brian,
Run your cutter down the length of the Y axis and check that your reference edge is parallel. You might find you have 1/8 runout on the edge. If you reference edge is not parallel you will get the shift you are seeing.
Cheers
Peter
@@cncnutz Thank you sir... I will double-check that all... awesome videos :)
Great tutorial!!
Help me too
:)
Lc1975 Good one. Glad it helps
Cheers
Peter