When multiplying the torque table amounts by 10 percent I always only multiply the positive numbers by 1.1 then increase the negative numbers by 10 percent by multiplying by .9. If you multiply the negative numbers by 1.1 it will be a lower number and that I might not be what you are aiming for. Great video!
When I start my car and it's in open loop its really lean like 18-19.1 AFR. How do I adjust that? When the coolant hits 60 degrees and closed loop is started my AFR is great about 14.2-15.
When multiplying the torque table amounts by 10 percent I always only multiply the positive numbers by 1.1 then increase the negative numbers by 10 percent by multiplying by .9. If you multiply the negative numbers by 1.1 it will be a lower number and that I might not be what you are aiming for. Great video!
Great video as always. I wanted to please ask, at 3 minutes you mentioned a book? Is it an HpTuners book? Keep up the great work.
Yea send me an email regarding the book.
My email is Strongspeedworks@hotmail.com
It’s really cool to watch the all steps it takes and all the charts too
When I start my car and it's in open loop its really lean like 18-19.1 AFR. How do I adjust that? When the coolant hits 60 degrees and closed loop is started my AFR is great about 14.2-15.
You need to adjust your fueling tables. Both vve and maf.
would it be a good idea to disable 1 of them, closed or open loop? @@strongspeedworks