pumped to see how it goes at the drift event. also pumped to get the 8hp swap happening. not many parts left to acquire now. going into a nissan patrol behind a Mercedes diesel engine for those interested
Hmmmm 🤔 we do have fun in here for the most part at least what I see when I’m in the comments lol. But I have deep ideas!! I worked on attack helicopters and I have a lot of idea that can be used on the platform. I just don’t want to clutter up the comments for the people that you genuinely help and have questions for you. But being honest this is the only channels that shows shows the evolution of this platform. This is like the R&D channel for n54’s.
@@devonsmith1995 well thanks for looking at the comments section that way. Also thanks for following along for so long! We have some cool ideas for the n54s that we will keep sharing.
Wow already driving, those guys work FAST! When you explained all the things the 8hp is capable of doing, it made me very excited to it fully working! Loving the content lately, keep it up!
I’m so pumped you guys are doing this & that you’re just a few weeks ahead of my build as they’re very similar setups (engine & drivetrain at least)... Going to be super helpful for us to see the little tweaks you make or issues you encounter 👌🏼
If you do a 8HP auto swap with let's say a S85 from the E60 M5, is there any way you can make the interior cabin where the gear shifts are, looking OEM as possible? I just don't like the look of that huge gear shift knob, but the technology is awesome!
i work up the road from whitey's wiring! I have a single turbo 335i with a turbo manifold built by simply tuning. been trying to book my car in there for months they're so busy 😪
I have a base facelift sedan 325i with 5hp19 auto trans Want to swap mine also to a 8hp version don't know yet.. Also hope to find a twin screw charger so i ru about 370 hp max so 8hp45 would be i think to low but a 70 would probably overkill. ? And yeah what do i need all to get it working also with smg paddle's
Hey Hevendra, do you have any info on you n54 e36? I have a RHD e36 coupe and an e92 write off in factory manual. Would love to go this way with an 8hp70, big top mount single turbo and port injection. Andrew what haltec does this run? Has it had the direct port injection deleted? Looking to do the same with the new R3
I need a little more indept information about shortening the drive shaft. I am facing a similar problem. Just need to know what to tell the shop that is going to shorten it for me.
You should check with the shop what information they will want. They will likely have a few specific questions that they require in order to build a shaft to suit.
Ahh! I need MORE MONEY! But seriously I NEED more Money! This is an incredible build. When I see that E46 rolling (Same color as mine!) and imagine the torque and control my own could have.... I drool. I love this build and it's SO inspiring! I have been watching the build the "Seems Legit" guys have been doing and it all gets me fired up! As "they" say "Too many cooks make the strange sounds coming from the trans?" ? Wait. No.... Q: "How many 8hp Lamik conversions does it take to stop using wrong Metal trans pan?" (I tried to warn them lol). A: "One, then all the rest can ignore it and do the same thing!". Sorry about all that I'm a bit of a goof. I really hope Dan and the guys there think you are an asset to their world! I know I sure do. Getting to see the way they can work is really cool! The ending is very funny too. (I hope LOL). I'm assuming you did some editing to make us all gasp a bit? Oh and I can tell something is off with the Black E90 M3 but I'm just not sure. I love it!!
Hello, Nice video, I love it 🙂 Do you have reference of e90 cross member please ? and do you sell steel plate for 8hp gearbox and cylinder adapter please ? Thanks in advance, I bought a 8HP and start swap soon on my 330ci Turbo 👍 Have a nice day !!!
This cross member on the car is a e90 335i one. The bracket on the box is custom made. However it may be worth looking in a e90 330d trans bracket. I know they bolt to the 8hp, just a matter of seeing how it’s sits length wise.
@@ZeroTo60Tube engine trans adapter plate & tcu, I already have it, just I search gearbox mount to the car I will buy a 330d automatic cross member, if it's almost pnp 👍 Thanks for your quick reply 😃
A well-engineered conversion from manual to 8HP70. It will be interesting to see what Dan's impression is when it is completely sorted. Andrew, when you installed the 8HP70 into the Flow Max car, I thought you had to cut away some of the bellhousing for the starter to fit which wasn't done on this installation. Have I missed something there?
You are correct, Dan did this when i was out of the shop and i didnt get any footage of it..... then i totally forgot about it by the time the trans was mounted.
@@ZeroTo60Tube I have replaced the built engine with a standard engine with 100,000km. It actually runs properly now and pulls very nicely even on 98. I have to do a couple of datalogs and get them off to Ken to refine the tune. The RB GF 19T turbos are laggy down low compared with the previous RB EVO 17Ts but a lot stronger from 3,000rpm. In the next couple of months, I will begin pulling the built engine apart to see why it had low compression in all cylinders.
@@kencooper8636 Well i am super happy to hear the car is on the ground running again! Will keep an ear out to see what happens with your built motor, hopefully its not a write off.
What a nice car, i hope there still follows a video on it though 😅 could have been longer and with more Videomaterial! I really love it! Thx as always Andrew and keep your head up 👍😊
Sorry for the delayed reply, i was hoping to get under the car and check but i havent been near it. I think its in one of the videos as well, but if it does hang below the rail its next to nothing.
Pretty sure Brock could machine you parts to fix your heart... just saying. He could rebuild you... bigger... stronger... faster... lol Cool stuff man. You're really making me want to do an 8HP swap on the 535i... and its already going to be a stupid expensive car. lol
@@ZeroTo60Tube Definitely cant wait to see more 8hp content man. Your content has been serious inspiration for my clapped old 535i. I love it, my wallet hates it. lol
That e90 m3 has f80 mirrors Edit: ooor maybe not, hmm Edit 2: I see it has some headlight eyelids but that wouldn’t make it very unique, really scratching my head with this one 😂
So in theory, would the BMW S62 accept the ZF 8HP transmission as well? A S62B50 engine with an automatic transmission in an E38 body would be my absolute dream car!
@@marlonbaird6070 N62 has way more problems. My ultimate dream would be the McLaren F1 V12 engine, aka the S70/2 engine into an E38. It's a shame that BMW produced a M3 with an inline-6 engine from its motorsport division, a M5 with an V8 engine from its motorsport division, but not a M7 that had a proper V12 from its M division, that would have 12 individual throttle bodies. Today's M5 is definitely larger in size compared to the E38, and possibly even the M3/M4.
Keen to see this ripping on the track! Al's still got a DCT hiding under the bench that could be useful...
The DCT develepment has come a long way since he bought that too. What ever it goes in, it should be a sweet setup.
pumped to see how it goes at the drift event. also pumped to get the 8hp swap happening. not many parts left to acquire now. going into a nissan patrol behind a Mercedes diesel engine for those interested
I will forever love with channel I wish I had a group to talk to about this platform like you do. It’s like you have connections to everyone.
You do!!! Our comments section!
Hmmmm 🤔 we do have fun in here for the most part at least what I see when I’m in the comments lol.
But I have deep ideas!! I worked on attack helicopters and I have a lot of idea that can be used on the platform. I just don’t want to clutter up the comments for the people that you genuinely help and have questions for you. But being honest this is the only channels that shows shows the evolution of this platform. This is like the R&D channel for n54’s.
@@devonsmith1995 well thanks for looking at the comments section that way. Also thanks for following along for so long! We have some cool ideas for the n54s that we will keep sharing.
Wow already driving, those guys work FAST! When you explained all the things the 8hp is capable of doing, it made me very excited to it fully working! Loving the content lately, keep it up!
Glad you enjoyed it! The theory is there for these things to be amazing, just need to make it all work.........
@@ZeroTo60Tube I’m sure you will figure it out! 😎
I’m so pumped you guys are doing this & that you’re just a few weeks ahead of my build as they’re very similar setups (engine & drivetrain at least)... Going to be super helpful for us to see the little tweaks you make or issues you encounter 👌🏼
Yeah!!! Awesome to hear you are doing one to. Feel free to drop a new comment if you have any questions I should see that
YO, these guys don't mess about!! OVERKILL is better then an expensive failure!!
Yeah man. I’m kinda in awe and how they things done
If you do a 8HP auto swap with let's say a S85 from the E60 M5, is there any way you can make the interior cabin where the gear shifts are, looking OEM as possible? I just don't like the look of that huge gear shift knob, but the technology is awesome!
it is possible yes, many oem bmw shifters are compatible including dct shifters
This is a very interesting build. I'm excited to see how she's drifts.
If she can do it properly I’ll be exstatic. Dan is very particular too, he won’t settle for something that’s not right on a drift car.
What do i need for M54 B25 turbo 8HP swap? Its a 03 325i and will need a decent 350-400hp
god e46 m3 is just beautiful
TurboLamik the world one E-series at a time
Haha
That place is a one stop shop. Fucking sick.
i work up the road from whitey's wiring! I have a single turbo 335i with a turbo manifold built by simply tuning. been trying to book my car in there for months they're so busy 😪
If it all works out going to be a sick drift car
Just when you think you can’t love brock anymore, out comes that gem.
Full of wisdom, knowledge and like sperm from what I can gather
Wow guys, great result up till now. Thanks for sharing. Have a great week. Dutch regards, Nico.
Very very interesting video. well done. being following your 8hp builds for a while now. Very interested in doing for myself in my e36 n54 motor.
Well feel free to leave a comment with any questions.
I have a base facelift sedan 325i with 5hp19 auto trans
Want to swap mine also to a 8hp version don't know yet..
Also hope to find a twin screw charger so i ru about 370 hp max so 8hp45 would be i think to low but a 70 would probably overkill. ?
And yeah what do i need all to get it working also with smg paddle's
Hey Hevendra, do you have any info on you n54 e36? I have a RHD e36 coupe and an e92 write off in factory manual. Would love to go this way with an 8hp70, big top mount single turbo and port injection.
Andrew what haltec does this run? Has it had the direct port injection deleted? Looking to do the same with the new R3
@@patrickgriffin6485 search garageaholic on UA-cam. So far I have the e36 chassis. Looking for the donor vehicle.
Mate, your gonna give us a heart attack with the outro, hope it ain't crashed 😜
Great video as usual, keep up the good work 👍
😜 all is well!
Your videos bring me lots of joy, curious to see how you figured out the lamik wasn’t communicating with the haltech.
I plugged the lamik screen in haha. Showed the error for no communication with ecu. Turns out I had the can speed set wrong for haltech.
@@ZeroTo60Tube ah I see, I didn’t catch that. I hope you can set it up perfect for drifting and dan loves it!
That gear shifter is awesome 👌
It’s much better than I was expecting. I kinda want one.
great playlist
The sunroof is what makes that E90 M3 instead of the carbon roof.
Was thinking the same!
No you can option both from the factory. This has something that was not a factory option.
Is it some sort of heads up display in the middle? Behind the infotainment?
@@manousosanapliotis7981 nope..... more obvious than that
Hi ...sick videos love it ....any more information on connecting the Lamik with Haltech ?
Thanks
Have you seen this one yet? Setup TURBOLAMIK TCU & Aftermarket ECU for #shiftcut
ua-cam.com/video/ZWvsm2lum40/v-deo.html
Make a set up for m62
I would love to get rid of my zf5hp out of my e53 4.6is
Whoah! You guys are killing it
Man i didn’t think it would be driving this week….. 😳 bonkers
Looks like Dan has a big shop, any room for zero to 60 to move into?
Well there is room, just need to work out how to pay for it haha.
HAS THIS SWAP EVOLVED AT ALL?! NEED TO KNOW WHATS NEED FOR NON-M 8SPD SWAP WITH M54. NEED A KIT THAT JUST BOLTS EVERYTHING UP WITHOUT GUESSING GAME!
I need a little more indept information about shortening the drive shaft. I am facing a similar problem. Just need to know what to tell the shop that is going to shorten it for me.
You should check with the shop what information they will want. They will likely have a few specific questions that they require in order to build a shaft to suit.
Can you make a video on the direct inject delete. im curious to see if its a worthwhile thing to do for reliability
Will definitely dive in to it with more detail. However involves replacing the factory dme. So it is quite in depth
Happy to see 1st drive success 🙌 God bless
Thanks man. Needs some tweaking but that is as expected.
Great video man !! I just wanted to ask you if what would be better , a 335i xdrive n54 or a 335i rwd n54? what would be better for a build ?
Depends what you are tyring to do. Street car, probabaly xdrive.
That M3 has F30 style headlights and custom grills
Is Brock what you call a bogan since he's rocking the mullet? He's got some skills!
Some say brock is the father of all bogans and that his mullet is a true reflection of his mechanical engineering ability.
@@ZeroTo60Tube kinda like Samson, his power is in his hair!
Ahh! I need MORE MONEY! But seriously I NEED more Money! This is an incredible build. When I see that E46 rolling (Same color as mine!) and imagine the torque and control my own could have.... I drool. I love this build and it's SO inspiring! I have been watching the build the "Seems Legit" guys have been doing and it all gets me fired up! As "they" say "Too many cooks make the strange sounds coming from the trans?" ? Wait. No.... Q: "How many 8hp Lamik conversions does it take to stop using wrong Metal trans pan?" (I tried to warn them lol). A: "One, then all the rest can ignore it and do the same thing!". Sorry about all that I'm a bit of a goof. I really hope Dan and the guys there think you are an asset to their world! I know I sure do. Getting to see the way they can work is really cool! The ending is very funny too. (I hope LOL). I'm assuming you did some editing to make us all gasp a bit? Oh and I can tell something is off with the Black E90 M3 but I'm just not sure. I love it!!
Ending was all in fun. This new laptop has a load of sound effects so I thought why not use them haha. Thanks for the kind words man! Appreciate it
The E90 M3 headlights are interesting, not quite my style, I prefer the OE look but that narrow, F8X like look is interesting
Is that what it is? I couldn't quite figure it.
Lights are stock 😅 guess again 🤣
Hello,
Nice video, I love it 🙂
Do you have reference of e90 cross member please ? and do you sell steel plate for 8hp gearbox and cylinder adapter please ?
Thanks in advance, I bought a 8HP and start swap soon on my 330ci Turbo 👍
Have a nice day !!!
This cross member on the car is a e90 335i one. The bracket on the box is custom made. However it may be worth looking in a e90 330d trans bracket. I know they bolt to the 8hp, just a matter of seeing how it’s sits length wise.
Oh and the box adapter plate, that came from turbo lamik.
@@ZeroTo60Tube engine trans adapter plate & tcu, I already have it, just I search gearbox mount to the car
I will buy a 330d automatic cross member, if it's almost pnp 👍
Thanks for your quick reply 😃
What seats are those? Car coming together beautifully!
It has f82 m4 seats
I just realised where you are!
About 8 minutes from my house ha ha ha! I should bring my my m135i and pick your brains!
A well-engineered conversion from manual to 8HP70. It will be interesting to see what Dan's impression is when it is completely sorted. Andrew, when you installed the 8HP70 into the Flow Max car, I thought you had to cut away some of the bellhousing for the starter to fit which wasn't done on this installation. Have I missed something there?
You are correct, Dan did this when i was out of the shop and i didnt get any footage of it..... then i totally forgot about it by the time the trans was mounted.
@@ZeroTo60Tube I have replaced the built engine with a standard engine with 100,000km. It actually runs properly now and pulls very nicely even on 98. I have to do a couple of datalogs and get them off to Ken to refine the tune. The RB GF 19T turbos are laggy down low compared with the previous RB EVO 17Ts but a lot stronger from 3,000rpm. In the next couple of months, I will begin pulling the built engine apart to see why it had low compression in all cylinders.
@@kencooper8636 Well i am super happy to hear the car is on the ground running again! Will keep an ear out to see what happens with your built motor, hopefully its not a write off.
@@ZeroTo60Tube I hope not
What a nice car, i hope there still follows a video on it though 😅 could have been longer and with more Videomaterial! I really love it! Thx as always Andrew and keep your head up 👍😊
Thanks max!
how much lower does the transmission pan sit lower then the rails
Sorry for the delayed reply, i was hoping to get under the car and check but i havent been near it. I think its in one of the videos as well, but if it does hang below the rail its next to nothing.
I only realised a couple of months ago that E90 M3’s have E92/couple front ends.
Yeah. They aren’t interchangeable but same style anyway. Plastic guards etc.
However this one has something that wasn’t a factory option.
Запиши как работа коробка на трассе. Имею ввиду обороты , скорость и передачу
is it the grill on the front quarter panel
It's actually the colour. wasnt a factory option for an m3.
Pretty sure Brock could machine you parts to fix your heart... just saying. He could rebuild you... bigger... stronger... faster... lol Cool stuff man. You're really making me want to do an 8HP swap on the 535i... and its already going to be a stupid expensive car. lol
Haha, I mean maybe he has a program for it on the cnc….
The 8hps are rad to say the least. Especially when you have transbrake.
@@ZeroTo60Tube Definitely cant wait to see more 8hp content man. Your content has been serious inspiration for my clapped old 535i. I love it, my wallet hates it. lol
Has Dan swapped the engine in that m3 for an n54? Or is it supercharged?
N54. There is a vid with detail on the build last week.
@@ZeroTo60Tube haha no I meant the e90 lol
@@br4d101 ahhhh dammit sorry. No it’s a stock s65 ……… for now.
E90 M3 looks like it was completely carbon for a minute 😂
💪🏼💪🏼 But what happened at the very end 😳
😜
That e90 m3 has f80 mirrors
Edit: ooor maybe not, hmm
Edit 2: I see it has some headlight eyelids but that wouldn’t make it very unique, really scratching my head with this one 😂
Appreciate the effort there some good guess's
What bootlid is on this car? 😍
Genuine e46 CSL
@@ZeroTo60Tube damn where’d you find it?
@@yusufachmat8588 genuine through BMW Australia. Pre Covid price hike.
What is special about the e90 m3 you mentioned earlier?
Well I was hoping some purists would pick it. It’s something that wasn’t a factory option.
@@ZeroTo60Tube the sun roof or the carbon set up?
@@bavarianhero no no. That’s all factory options/normal stuff. It’s something that can not be optioned on a m3.
@@ZeroTo60Tube then I’m lost, I couldn’t see anything from the video that looks out of the ordinary.
Cannot believe he let his car go auto
Just wait just wait
i have no idea what’s different on the e90, i looked for 5 minutes🤣
It’s a rare thing, non factory option and I didn’t even know till Dan told me.
He crashed at the end? Or are you pulling our chains? 🙂
The tensioner might be loose, maybe a little stretched on the chains.
Can't Rev that n54 to 8250 rpms though 😂
Hold Daniel’s Beer….. he reved his higher hp stock motor to 8000rpm for many years
e90 m3 with a sunroof!?!?!?!?!?!?!?!?!
Sunroof was an option down here. Quite a few about, the sunroof helps a lot when you park the car on a hot day.
SEND IT!!!! LOL
Lady Dave is gone isn't she?
New models come out every year……
First for once
Second
FIRST
💪
So in theory, would the BMW S62 accept the ZF 8HP transmission as well? A S62B50 engine with an automatic transmission in an E38 body would be my absolute dream car!
That would be a dream or even swapping N62 from the e60 550i
@@marlonbaird6070 N62 has way more problems. My ultimate dream would be the McLaren F1 V12 engine, aka the S70/2 engine into an E38. It's a shame that BMW produced a M3 with an inline-6 engine from its motorsport division, a M5 with an V8 engine from its motorsport division, but not a M7 that had a proper V12 from its M division, that would have 12 individual throttle bodies. Today's M5 is definitely larger in size compared to the E38, and possibly even the M3/M4.