I just finished my Dodge Truck with the Raptor Liner. Dodge Trucks from 1994-2000 all have the same paint problems. Clear coat comes off and then the fading starts. I decided to use this product on my truck since it sets outside. Its a great product and popular among the four wheel drive community for durability.
Turn out pretty good? Has UV protection & super durable...Mine is only weeks old, but others that done it few years ago seem to be happy with how its holding out! Id like to do my boat & fibreglass camper with Raptor !
@@miked.r.6671 Mike, it turned out great. The secret to making this stuff last is the prep work. Sanding, priming bald spots and a good thorough wipe down before spraying. To be honest I hated the taping and masking part worse than anything, very time consuming but important to having a good paint job.
Mike I forgot one thing, after sanding I pressure washed the entire truck before taping and masking. Then I did a wipe down with mineral spirits just to make sure the body was clean.
@@timatchley3862 I hear ya dude! , The taping was very time consuming! Now that Ive done it, I can tape / mask in 1/3 the time after some advice from auto body guys! I used brake clean & mineral spirits before tape & spray.
@@miked.r.6671 Thanks for the video, I Raptor Lined the bed of my truck four years ago and it still looks great. I used the same methods on the truck body so hopefully it will last. Its good talking to you and good luck on any future projects.
Best video on Raptor Lining a vehicle - hands down! Fast forwarding the sanding process, and all other bits that we don't need to watch. Great music. Awesome video. Great job!
@@scootermcgee3451 Holding out Great! Just back from a 2 week trip in Wilderness.....Hose off & good to go.. Dirt doesn't stick. The Raptor will last longer then Diapers in a Land Fill!
What do you do for the cab under the doors and the painted inner sides of the doors? My truck is silver and i am wanting to go O.D. Green and wonder if spraying the inner sides of the doors will cause the weatherstripping to not seal against the liner paint?
I used tint colour called " Anvil" I used 75 ml to every bottle or Tintable Raptor. You can use up to 100 ml, but it overfills the bottle, so 75ml is sweet. Black used on hood/ front bumper. Theres another video that shows finished job better. Really happy with results.
Held up great so far, and no fading or chips . I just wash it normally with a brush and soap /water . You cant use a sponge, or it will just tear it apart . Highly recommended if you thinking about doing it. Prep is the key & time consuming. Very durable/ UV protected . Thinking about doing it to my camper/boat in springtime .
Raptor Paint Jobs RGV To paint a Dodge Ram Double cabin how many Raptor pots do I need? Is that raptor used or diluted with thinner or gasoline? and know if the final finish would be shiny? or is it matte? How about the dust? Does the powder stick too much? Well, it seems to me that after filling with dust and washing with water and soap, the truck would later be dull and opaque?
Thanks JR . Raptor is great and still looks like the day I put in on...I don't see any chips even whatsoever, given I take it on lots gravel roads . UV Protected & tough stuff! People say " You will Never get that off". Im like " yeah, thats the idea"! Do it ! Just spend the time prepping properly .
I guess Im asking the wrong place but does any of you know of a tool to log back into an Instagram account?? I was stupid forgot the login password. I love any help you can offer me!
@Wallace Julian I really appreciate your reply. I got to the site on google and I'm waiting for the hacking stuff now. Looks like it's gonna take quite some time so I will reply here later with my results.
You need to remove the clear coat with 180 grit sandpaper. I used scotchbrite to get in the some places as well. Proper prep is key. The Raptor will bond very strong, and still looks great with no issues 1.5 yrs later so far.
Dirt washes off very easily , and it seems dirt doesnt stick to it .Hose almost does it all.You cant use a sponge or it tears it up. Bucket soap & Brush..... People think its a flat paint, but its actually semi gloss finish/urethane finish. Theres another video, that shows finish better if you like view .
You can purchase similar spray gun with adjustable spray nozzle ( Vari-Nozzle) to lock the spray consistency . You can load the raptor into a conventional gravity spray gun as well , but covers nice with the one in kit . Quite user friendly product & can be used on on your backyard driveway, or a " Trailer Park " Mr Lahey!
I used 10 bottles of Raptor, but didn't require doing the box as I have plastic liner. The box might require another 4 bottles maybe if you do that. I did inside door jams as well ....2 coats everywhere and covers nicely at 60 PSI
It looks just like when I originally sprayed it. I sure took it to the test this year with many trips in the backroads/wilderness . No problems whatsoever with chipping or fading, and UV protection. Recommended if your considering to do it.
Shouldnt be a problem, but you will have to take your time & wait as your compressor loads up the tank, so your PSi doesnt fall. I sprayed around 60 PSi . You have about an hr before bottle gets hard, so plenty of time , and do one section/bottle at a time . Add Hardener.....Shake N Shoot....One bottle at a time.
@@miked.r.6671 right on... i believe my air compressor is a 4 gallon and the vehicle i'm going to do is a jeep so there isn't as much surface area to cover. The kit i was looking at was the gallon or 4 bottle kit, you think that'd be enough? 2 door soft top yj jeep
@@thespig13 Hmm... Id say you might be cutting it close with 4 bottles...I know other guys with jeeps who said they used 6 bottles , but also did bumpers with 2 coats . You just goin black?
You have a new subscriber. I liked your description. I have a Dodge Ram the same as yours and I want to paint it this black with Raptor producer, a question, that glossy black finish remains perennial, that is, does it not become opaque and dull when dust falls and then when you wash it it remains opaque? , is that I do not want to be spending later on silicone so that it is shiny after I wash it. and the other thing is to know if it gets dirty a lot of black color. ?
The finish is actually semi gloss in appearance & has Ultraviolet protection, so you dont have to worry about it fading. It washes easily with hose & a brush. Good luck, I hope it turns out nice ;)
Tint colour is called "Anvil". Raptor comes in black ( Non tintable) and tintable version .Add 75-100 ml tint to each bottle . Shake n shoot. Still looks like new after 2.5 yrs!
No Tiger Stripes....Covers very nicely with 2 coats, and its more of an undercoating type gun, then traditional sprayer...As long as you keep gun at same distance & get the psi you like, its very user friendly....I liked 60 PSI texture & turned out very even. Do it!
@@miked.r.6671 Thanks. It's been a long time but project its reaching its end. Installed some lights today and planning for a gin pole attachment too. I actually feel like doing my entire truck now.
Tint colour is called 'Anvil" from any auto body supplier. I added 75 ml to every bottle of Raptor . You can use up to 100 ml of tint to every bottle. Be sure you get the tintable raptor .
80-180 grit to get that clear coat off...Some scotchbrite to get into the harder places... Brake clean / Primer all bare metals....Adhesion promoter to all plastics prior to paint ( two coats )
Too Wet / Too Close = Tiger Stripes. So, just avoid that & your good House Machine! Raptor is very user friendly, so as long as you keep it consistant, you shouldnt have any problems. I stuck with 60 psi for both coats, and got no Zebra, Tigers, or Lions.......Oh My! ;)
Tint colour is called 'Anvil" from any auto body supplier. I added 75 ml to every bottle of Raptor . You can use up to 100 ml of tint to every bottle. Of course, make sure you purchase the tintable raptor ;)
Thanks Dude! I used 3 bottles black for hood/grill & front bumper.... 6 bottles tintable ( colour Anvil) for rest of truck. I have plastic bed liner, so didn't do in there. I think I will do the mirrors & spray inside fender wells soon. Yeah, the prep/tape takes awhile. I did inside the doors/jams as well. Pretty happy with how it turned out!
Mike D.R. I have a Gray Ram, and I would like to know if you can send me images of your Dodge Ram truck to see the finishes. help me my brother please. or if you have an instagrans account where I can see it? Raptor Paint Jobs RGV To paint a Dodge Ram Double cabin how many Raptor pots do I need? Is that raptor used or diluted with thinner or gasoline? and know if the final finish would be shiny? or is it matte? How about the dust? Does the powder stick too much? Well, it seems to me that after filling with dust and washing with water and soap, the truck would later be dull and opaque?
I used 3 bottles black for hood/grill & front bumper.... 6 bottles tintable ( colour Anvil) for rest of truck. I have plastic bed liner, so didn't do inside the box man ! 9 bottles total 75 ml Tint to every bottle
Prep Work is keep....Get that clear coat off is a must ! Time consuming, but makes for better end result .Taping takes awhile! I did 2 coats at 60 PSI, and turned out really nice. Theres another video with better end result video/pics if you like to look. Raptor is very user friendly , and I really happy with how it turned out. Do It Jake!
Mike D.R. Thanks for the reply brotha! Most of my clear had flaked off so it won’t be too hard remove but the good thing is the body is all straight and no rust. Interior is clean as the day it came off the showroom floor but the paint is really an eye sore to me. Thanks again Mike.
Great dude... Theres another video with better images of end result. Took it on 2 week trip in wilderness. Mud doesn't seem to stick to it...Rinse off with hose...Super durable Im sure it will last
@@humbertorosales2515 Paint code for anvil PPG CODE 933726 Gray. You would have to buy tintable Raptor . You can get the tint "Anvil" at a body shop or auto paint supplier. I used 75 ml of tint to every bottle, but can use up to 100 ml.
Mike D.R. I have a Gray Ram, and I would like to know if you can send me images of your Dodge Ram truck to see the finishes. help me my brother please. or if you have an instagrans account where I can see it? Raptor Paint Jobs RGV To paint a Dodge Ram Double cabin how many Raptor pots do I need? Is that raptor used or diluted with thinner or gasoline? and know if the final finish would be shiny? or is it matte? How about the dust? Does the powder stick too much? Well, it seems to me that after filling with dust and washing with water and soap, the truck would later be dull and opaque? is black o gray
Nice work (like that you did the letters too) - I customised my X5 and finished it with raptor (youtube X5 offroad beast - it's a little slide show), gets more attention at car shows than anything else there - will be doing more projects in the future.
Had a look at the X5 Offroad Beast.....Looks Sic! Nice Dude! Theres another video I posted with better end result video/photos taken if you wanna have a lookie
It’s obvious it was your first time. Cousin has it done and the right way. Had it done to his 86 Suburban. Two tone and I must say it looks amazing. Few hundred dollars more that’s the way to go. But hey keep learning 😉
Thanks :) Not much done to the truck aside from 2" leveling kit / ...Rancho RS 900S Shocks./ Air Bags ..Edge Milage Max tuner....FASS Air Intake....BD Diesel Lift Pump. Straight Thru stainless Exhaust, and just took out the Turbo Silencer Ring, for That Turbo Whistle sound thats so Kewl like a Jet Aircraft !
And just think, you too can get that same texture as your living room walls. But wait if you order now, we' ll throw in a free application device for only shipping and handling charges. Go ahead you know, you can't stand it.
Hmmm .. Now you got me thinking Frank ! Put that free Undercoat spray gun to use & Raptor my Livingroom, Bedroom & shower even! Everything but the toilets & Bathtub! That might hurt! With proper preparation, that Raptor sticks to anything! lol I wonder if anyone has Raptored a Mtn Bike?
@@gsgaud Thanks Mike. Yeah, it Helps Them Cope with Their Low Self Esteem ! These AA holes ( 1st A = Anomymity) are always the ones with no videos themselves lol Rock On Brudda !
The REALITY that you have to go through all this effort is due to an owner being a slob & not taking pride in their vehicle. I’ve had cars & trucks that are 20+ years old with no paint issues, because I get off my ass & wash + wax + seal the paint. This is also why I park away from people in lots - too many cockroaches that don’t care.
Yeah, I sometimes like it....Sometimes not so much Chris lol I may repaint hood in the spring & Raptor my Boat/Camper while Im at it. I might even tape off my head and Raptor paint some hair on Dude! This stuff is The Shit!
Such random spray technique. Looks good tho
Looks fantastic 👌🏾
I just finished my Dodge Truck with the Raptor Liner. Dodge Trucks from 1994-2000 all have the same paint problems. Clear coat comes off and then the fading starts. I decided to use this product on my truck since it sets outside. Its a great product and popular among the four wheel drive community for durability.
Turn out pretty good? Has UV protection & super durable...Mine is only weeks old, but others that done it few years ago seem to be happy with how its holding out! Id like to do my boat & fibreglass camper with Raptor !
@@miked.r.6671 Mike, it turned out great. The secret to making this stuff last is the prep work. Sanding, priming bald spots and a good thorough wipe down before spraying. To be honest I hated the taping and masking part worse than anything, very time consuming but important to having a good paint job.
Mike I forgot one thing, after sanding I pressure washed the entire truck before taping and masking. Then I did a wipe down with mineral spirits just to make sure the body was clean.
@@timatchley3862 I hear ya dude! , The taping was very time consuming! Now that Ive done it, I can tape / mask in 1/3 the time after some advice from auto body guys! I used brake clean & mineral spirits before tape & spray.
@@miked.r.6671 Thanks for the video, I Raptor Lined the bed of my truck four years ago and it still looks great. I used the same methods on the truck body so hopefully it will last. Its good talking to you and good luck on any future projects.
Best video on Raptor Lining a vehicle - hands down! Fast forwarding the sanding process, and all other bits that we don't need to watch. Great music. Awesome video. Great job!
Thanks Scooter..Pretty happy with how it turned out..Theres another video with better shots of truck finished if you like have a look!
@@miked.r.6671 How's it holding up to our BC weather?
@@scootermcgee3451 Holding out Great! Just back from a 2 week trip in Wilderness.....Hose off & good to go.. Dirt doesn't stick. The Raptor will last longer then Diapers in a Land Fill!
Can you use any automotive paint? How many ounces of paint per liter?
What do you do for the cab under the doors and the painted inner sides of the doors? My truck is silver and i am wanting to go O.D. Green and wonder if spraying the inner sides of the doors will cause the weatherstripping to not seal against the liner paint?
Remove all weatherstripping and tape off the interior, did the same to my 2004 RAM 1500. Seals are working just normal.
What color of gray is that.
Thanks for the vid!
So you used black for the hood, what is the color of the body of the truck? Was it Basalt Grey from Raptor Liner?
I used tint colour called " Anvil" I used 75 ml to every bottle or Tintable Raptor. You can use up to 100 ml, but it overfills the bottle, so 75ml is sweet. Black used on hood/ front bumper. Theres another video that shows finished job better.
Really happy with results.
I'm curious as to how it has held up and how does it clean up after it gets dirty?
Held up great so far, and no fading or chips . I just wash it normally with a brush and soap /water . You cant use a sponge, or it will just tear it apart . Highly recommended if you thinking about doing it. Prep is the key & time consuming. Very durable/ UV protected . Thinking about doing it to my camper/boat in springtime .
How many bottles did you use? I ordered just four for a mid wheelbase high roof van. That won't be enough I guess...
I used 10 bottles to do the job ( 2 coats) at 60 PSI
@@miked.r.6671 Thanks, yeah I just ordered 2 more boxes. That should do the job. Good luck
Ats awesome work guy 👍🤙
Raptor Paint Jobs RGV To paint a Dodge Ram Double cabin how many Raptor pots do I need? Is that raptor used or diluted with thinner or gasoline? and know if the final finish would be shiny? or is it matte? How about the dust? Does the powder stick too much? Well, it seems to me that after filling with dust and washing with water and soap, the truck would later be dull and opaque?
Great vid bud!! How’s she holding up, thinking about doing my truck. I see your in BC as well awesome brotha!! Keep up with the vids
Thanks JR . Raptor is great and still looks like the day I put in on...I don't see any chips even whatsoever, given I take it on lots gravel roads . UV Protected & tough stuff! People say " You will Never get that off". Im like " yeah, thats the idea"! Do it ! Just spend the time prepping properly .
This guys spray pattern while it came out reminds me of when my add kicks in
What color is that gray? Looks awesome!
Thanks...Tint colour is called " Anvil" Posted another video if you like to look. Shows finished truck colour more
best music ever
Very nice. What size compressor did you use?
I guess Im asking the wrong place but does any of you know of a tool to log back into an Instagram account??
I was stupid forgot the login password. I love any help you can offer me!
@Shepard Zane Instablaster =)
@Wallace Julian I really appreciate your reply. I got to the site on google and I'm waiting for the hacking stuff now.
Looks like it's gonna take quite some time so I will reply here later with my results.
@Wallace Julian it did the trick and I actually got access to my account again. I am so happy:D
Thank you so much, you saved my ass :D
@Shepard Zane happy to help :D
Did you sand your whole truck before applying the liner? Do you think it will stick without sanding?
You need to remove the clear coat with 180 grit sandpaper. I used scotchbrite to get in the some places as well. Proper prep is key. The Raptor will bond very strong, and still looks great with no issues 1.5 yrs later so far.
@@miked.r.6671 thank you very much
Reminds me of flexstone paint. Was wondering when it gets dirty how does it look after cleaning it?
Dirt washes off very easily , and it seems dirt doesnt stick to it .Hose almost does it all.You cant use a sponge or it tears it up. Bucket soap & Brush..... People think its a flat paint, but its actually semi gloss finish/urethane finish. Theres another video, that shows finish better if you like view .
I did my landrover defender with this stuff it gets very muddy but just washes off with a jet wash good stuff.
Great video can you set your gun to a wider spread pattern?
You can purchase similar spray gun with adjustable spray nozzle ( Vari-Nozzle) to lock the spray consistency . You can load the raptor into a conventional gravity spray gun as well , but covers nice with the one in kit . Quite user friendly product & can be used on on your backyard driveway, or a " Trailer Park " Mr Lahey!
how many liters of raptor paint did you use?
Thanks !
I used 10 bottles of Raptor, but didn't require doing the box as I have plastic liner. The box might require another 4 bottles maybe if you do that. I did inside door jams as well ....2 coats everywhere and covers nicely at 60 PSI
J
BC represent!
How has it held up and would you do it again? I think it turned out good.
It looks just like when I originally sprayed it. I sure took it to the test this year with many trips in the backroads/wilderness . No problems whatsoever with chipping or fading, and UV protection. Recommended if your considering to do it.
@@miked.r.6671 thanks for the info
@@bobbyhorn7059 Theres another video I made that shows the end result better at end video if you want look.
Nice boots and I dig the song
Any problems with not having a bigger air compressor? I'm thinking of doing this but don't know if my air compressor is big enough
Shouldnt be a problem, but you will have to take your time & wait as your compressor loads up the tank, so your PSi doesnt fall. I sprayed around 60 PSi . You have about an hr before bottle gets hard, so plenty of time , and do one section/bottle at a time . Add Hardener.....Shake N Shoot....One bottle at a time.
@@miked.r.6671 right on... i believe my air compressor is a 4 gallon and the vehicle i'm going to do is a jeep so there isn't as much surface area to cover. The kit i was looking at was the gallon or 4 bottle kit, you think that'd be enough? 2 door soft top yj jeep
@@thespig13 Hmm... Id say you might be cutting it close with 4 bottles...I know other guys with jeeps who said they used 6 bottles , but also did bumpers with 2 coats . You just goin black?
@@miked.r.6671 No its gonna be a tan color... the jeep is already a tan color so I'd thought I'd match it
@@thespig13 Right On! I was going to go Desert Storm colour with Black but decided closer to match best
You have a new subscriber. I liked your description. I have a Dodge Ram the same as yours and I want to paint it this black with Raptor producer, a question, that glossy black finish remains perennial, that is, does it not become opaque and dull when dust falls and then when you wash it it remains opaque? , is that I do not want to be spending later on silicone so that it is shiny after I wash it. and the other thing is to know if it gets dirty a lot of black color. ?
The finish is actually semi gloss in appearance & has Ultraviolet protection, so you dont have to worry about it fading. It washes easily with hose & a brush. Good luck, I hope it turns out nice ;)
What’s colour did you use.
Tint colour is called "Anvil". Raptor comes in black ( Non tintable) and tintable version .Add 75-100 ml tint to each bottle . Shake n shoot. Still looks like new after 2.5 yrs!
Is that black or grey liner? I'm looking to do mine as well.
Black on front end...Grey rest of truck. Tintable Raptor. The tint colour "Anvil" was used .
is a Black o? is Grey?
Can you wash the car easily?
Reminds me of a popcorn ceiling that people hate today 🤣
haha Yeah, but the popcorn ceiling people scraping off would never come off if it was Raptor
Good job👍 Cool✌️🇷🇺👍
No tiger stripes? I've always been afraid of doing it because I'm afraid of getting tiger stripes
No Tiger Stripes....Covers very nicely with 2 coats, and its more of an undercoating type gun, then traditional sprayer...As long as you keep gun at same distance & get the psi you like, its very user friendly....I liked 60 PSI texture & turned out very even. Do it!
Thank you!!!
hi, how many bottles?
I used 10 bottles ( 2 coats) , but didnt do the box.
Just finished my flat bed I built. I used 8 bottles of black Raptor.
Nice Jorge! I had a look at your flatbed build....Very Nice work!
@@miked.r.6671 Thanks. It's been a long time but project its reaching its end. Installed some lights today and planning for a gin pole attachment too. I actually feel like doing my entire truck now.
What color was that
Tint colour is called 'Anvil" from any auto body supplier. I added 75 ml to every bottle of Raptor . You can use up to 100 ml of tint to every bottle. Be sure you get the tintable raptor .
Hey really nice job, any paint will work? Or should be with some specific characteristic?
That looks like BALLHANG!
What was a list of the materials you used for the prep ?
80-180 grit to get that clear coat off...Some scotchbrite to get into the harder places... Brake clean / Primer all bare metals....Adhesion promoter to all plastics prior to paint ( two coats )
How’s it holding up ?
Holding up just great. No chipping. No peeling...No fading.. Maybe I will make a video soon. Really happy with it actually!
Any tips to avoid zebra or striping?
Too Wet / Too Close = Tiger Stripes. So, just avoid that & your good House Machine! Raptor is very user friendly, so as long as you keep it consistant, you shouldnt have any problems. I stuck with 60 psi for both coats, and got no Zebra, Tigers, or Lions.......Oh My! ;)
Mike D.R. Thx Mikey 🤙🤙
where did you get the anvil paint color from?
Tint colour is called 'Anvil" from any auto body supplier. I added 75 ml to every bottle of Raptor . You can use up to 100 ml of tint to every bottle. Of course, make sure you purchase the tintable raptor ;)
How many did you use of raptor liner
What color did you use?
Tint colour is called "Anvil" I used 75 ml to every bottle
How long is this in you truck
Been about 6 months on truck now.
Is this charcoal metallic?
Paint Tint is called " Anvil" Raptor has a semi gloss look to it & not flat, but also UV Protected
Looks sweet I just did my 2001 tundra yesterday the prep work was the hardest. How many bottles did you have to use? I used 10 total with 2 coats
Thanks Dude! I used 3 bottles black for hood/grill & front bumper.... 6 bottles tintable ( colour Anvil) for rest of truck. I have plastic bed liner, so didn't do in there. I think I will do the mirrors & spray inside fender wells soon. Yeah, the prep/tape takes awhile. I did inside the doors/jams as well. Pretty happy with how it turned out!
Hey do a video I have a 2001 tundra also
Mike D.R. I have a Gray Ram, and I would like to know if you can send me images of your Dodge Ram truck to see the finishes. help me my brother please. or if you have an instagrans account where I can see it?
Raptor Paint Jobs RGV To paint a Dodge Ram Double cabin how many Raptor pots do I need? Is that raptor used or diluted with thinner or gasoline? and know if the final finish would be shiny? or is it matte? How about the dust? Does the powder stick too much? Well, it seems to me that after filling with dust and washing with water and soap, the truck would later be dull and opaque?
How many cans man ?
I used 3 bottles black for hood/grill & front bumper.... 6 bottles tintable ( colour Anvil) for rest of truck. I have plastic bed liner, so didn't do inside the box man ! 9 bottles total 75 ml Tint to every bottle
Came out awesome! Thinking about doing my 98 Durango, any tips?
Prep Work is keep....Get that clear coat off is a must ! Time consuming, but makes for better end result .Taping takes awhile! I did 2 coats at 60 PSI, and turned out really nice. Theres another video with better end result video/pics if you like to look. Raptor is very user friendly , and I really happy with how it turned out. Do It Jake!
Mike D.R. Thanks for the reply brotha! Most of my clear had flaked off so it won’t be too hard remove but the good thing is the body is all straight and no rust. Interior is clean as the day it came off the showroom floor but the paint is really an eye sore to me. Thanks again Mike.
Mike D.R. How many bottles did you use? I have g Th e same exact truck and plan on doing this too, that’s why I’m asking
Blaze Rich ended up selling it and never got to doing it. Sorry man
Mike D.R. How many liters/bottles did you use to do the truck, I plan on doing this and I have the same exact truck
What was four total price to do this?
around $200
How is it holding up
Great dude... Theres another video with better images of end result. Took it on 2 week trip in wilderness. Mud doesn't seem to stick to it...Rinse off with hose...Super durable Im sure it will last
I'm doing mine in camo green brown and black
Sweet! I thought about doing some cool Camo pattern, but more work. Are you going to Post a video?
Where you buy the paint
eBay / Amazon to purchase Raptor Liner .
and the anvil painting where
@@humbertorosales2515 Paint code for anvil PPG CODE 933726 Gray. You would have to buy tintable Raptor . You can get the tint "Anvil" at a body shop or auto paint supplier. I used 75 ml of tint to every bottle, but can use up to 100 ml.
Ok thanks for the information you did a great job with your ram
Mike D.R. I have a Gray Ram, and I would like to know if you can send me images of your Dodge Ram truck to see the finishes. help me my brother please. or if you have an instagrans account where I can see it?
Raptor Paint Jobs RGV To paint a Dodge Ram Double cabin how many Raptor pots do I need? Is that raptor used or diluted with thinner or gasoline? and know if the final finish would be shiny? or is it matte? How about the dust? Does the powder stick too much? Well, it seems to me that after filling with dust and washing with water and soap, the truck would later be dull and opaque? is black o gray
Nice job i.want to.do.that to my big truck dodge,is it easy to.do that I want to.save money.
Nice work (like that you did the letters too) - I customised my X5 and finished it with raptor (youtube X5 offroad beast - it's a little slide show), gets more attention at car shows than anything else there - will be doing more projects in the future.
Had a look at the X5 Offroad Beast.....Looks Sic! Nice Dude! Theres another video I posted with better end result video/photos taken if you wanna have a lookie
@@miked.r.6671 what is dad video please? I' want whaching video
1:30 ... Don't use Walmart or Autozone brand products...
Thanks for the tip ;) Adhesion Promoter was a Canadian Tire Product
How many did it take to spray the truck
I used about 10 bottles in total
It’s obvious it was your first time. Cousin has it done and the right way. Had it done to his 86 Suburban. Two tone and I must say it looks amazing. Few hundred dollars more that’s the way to go. But hey keep learning 😉
Well, if I end up trading in my truck for a 86 Suburban, maybe your Cousin can hook me up, if only few hund more LongDuk ;)
I bet this will put an END to Arizona Pinstripes :-)
Great vid music was cool 2 what else you do to the truck
Thanks :) Not much done to the truck aside from 2" leveling kit / ...Rancho RS 900S Shocks./ Air Bags ..Edge Milage Max tuner....FASS Air Intake....BD Diesel Lift Pump. Straight Thru stainless Exhaust, and just took out the Turbo Silencer Ring, for That Turbo Whistle sound thats so Kewl like a Jet Aircraft !
And just think, you too can get that same texture as your living room walls. But wait if you order now, we' ll throw in a free application device for only shipping and handling charges. Go ahead you know, you can't stand it.
Hmmm .. Now you got me thinking Frank ! Put that free Undercoat spray gun to use & Raptor my Livingroom, Bedroom & shower even! Everything but the toilets & Bathtub! That might hurt!
With proper preparation, that Raptor sticks to anything! lol I wonder if anyone has Raptored a Mtn Bike?
You messed up
Yeah, I allowed comments on my channel lol
@@miked.r.6671 your right. Fucking every fucking body has a negative comment. Much love bro rock on do your thang!
@@gsgaud Thanks Mike. Yeah, it Helps Them Cope with Their Low Self Esteem ! These AA holes ( 1st A = Anomymity) are always the ones with no videos themselves lol Rock On Brudda !
@@miked.r.6671 yup!
kyler murray
Hi
The REALITY that you have to go through all this effort is due to an owner being a slob & not taking pride in their vehicle. I’ve had cars & trucks that are 20+ years old with no paint issues, because I get off my ass & wash + wax + seal the paint. This is also why I park away from people in lots - too many cockroaches that don’t care.
I bet that you are a freaking blast at parties. Wait, What ? What do you mean that you never get invited to any?
👎🏻 on the black hood
Yeah, I sometimes like it....Sometimes not so much Chris lol I may repaint hood in the spring & Raptor my Boat/Camper while Im at it.
I might even tape off my head and Raptor paint some hair on Dude! This stuff is The Shit!
hope your name is not called THE RAOD RUNNER way to fast man,
Looks blotchy
Ya can't polish a turd lol.
What color did you use
Tin colour is called "Anvil"