Thank you so much. You have been a huge inspiration as well as a wealth of knowledge. I have learned so much from you in the short time I have been woodworking!
How a very nice and very practical. One little suggestion, maybe stick some aluminium foil paper to the inside of the chamber for easy cleaning when color spary. thanks
I just use a cardboard box, a 4" 200cfm fan, some ducting and a lot of duct tape. I spray paint every day and I never have to deal with paint fumes or dust from hand sanding small parts. This is way nicer though especially if you don't have a need for a paint booth daily and don't want something that big taking up so much room.
Félicitations ! Ils sont des personnes qui sont des génies, et vous en êtes ! Magique la cabine à peintures de sa conception et de la méthodologie apportée, ainsi de son environnement des autres outils dont vous êtes le concepteur ! De cordiales civilités Patrick
Wouldn't some sort of filter fabric be better if you're using it for paint? Those particles will stick to your fan blades pretty fast and build up, resulting in vibration issues over time.
And if u want to build something like this, try to find extractor with engine outside of the tube, paint fumes ale flamable and can ignite from engine ;/
And weirdly - there is already a extractor fan in his wall, why does the extractor/spray paint booth need its own fan when he is plumbing it into an external one? Both will get damaged - it needs filtration and whatever he is extracting with it will be blown outside
Yes. I painted a full size car and built a temporary paint booth. The fan lasted long enough to complete the job. Three stage paint and nasty VOC fumes. I used a HEPA filter to reduce particulates. If I do it again I will run the exhaust fan via belt drive. That way I can use a solvent to remove paint from the fan blades. Using an AC motor to prevent arcing(explosion)from DC motor brushes. This foldable paint booth has a well designed plenum. 🧠
Здорово, только сам вентилятор надо монтировать подальше от рабочего стола и через систему циклона. Так будет меньше шума в рабочей зоне, вентилятор меньше будет забиваться мусором, ну и сам мусор будет оседать в системе с циклоном. Вообще в мастерской должна быть единая система вентиляции с циклоном. А данная вытяжка на рабочий стол к ней просто подключаться.
0:45 Those screws seem really annoying. Seems like it would be easier to have half of the ring fixed, and the other half on a hinge and latch which you can just open and swing out of the way when installing the fan. You'd probably have to make it thicker and more heavy duty. If you are worried about that half of the ring not being screwed down you could make some sort of keyhole slot things which could grab some low profile bolt heads so that way that half of the ring would still have solid support.
great job,just add a panel filter on the top inside of this box, a filter between two grids for example , close to the motor intake. and it will be perfect.and your motor will last longer.and paint or other particules wont go anyway.
Sorry to be off topic but does any of you know of a tool to get back into an Instagram account..? I stupidly forgot my account password. I love any tips you can give me!
@Richard Mathew Thanks for your reply. I got to the site through google and Im trying it out now. I see it takes a while so I will reply here later with my results.
What is your source for the non-wood components you use in your projects? ie, bearings, fans, metals etc. I have noticed that they are ommitted from your plans as well.
What a creative and skilled guy! Such an inspiration and great videos! Just have one question for you DUI people: What kind/kinds of "double-sided (easy) removable tape" have your tried and would you recommend? The ones I've tried have been very expensive AND horrible to remove!! Now I'm using normal "masking tapes" (used for painting, etc) and folds them so they work as double-sided tape, as it's cheap, very easy to use and to remove without any trace of the used glue/adhesive on wood, tools, etc. But I still would like a good double-sided tape :) Be creative and careful out there (y)
JSK has replied to this question - "I use this double-sided tape. amzn.to/2rnNSkl However, I use four different types of double-sided tape depending on the application."
Paint can stays in your other rooms if your main ventilation fan is less powerful. And your fan bearing will collect all paint and will rotate slower and louder. You uploaded the video 2 years ago. How does it work know?
Нужно ставить фильтр перед вентилятором, что снизит его эффективность или найти вентилятор с вынесенным из потока двигателем. Хотя я таких маленьких не встречал никогда. В противном случае вентилятор, через который будет идти запыленный или с аэрозолью поток воздуха, долго не проживет.
At 2:45 I thought you were going to light a cigarette. I have something similar made with cardboard, but without the fan, so, thanks for the idea. Cheers.
HI, love you channel and the job you do, congrats and thanks, i want to ask if you have the video of the vertical saw that you show in this video, thank you !!
You're AWESOME! I love your projects! I've been thinking about doing something like that for a long time, mainly to avoid dust on my workshop (which is also the balcony of my apartment here in Brazil). My other purpose is noise reduction, maybe adding some internal foam layers, don't know.
Nice build👍 But I have a question. Where is the dust filter or spray filter? I don't think it is good idea press all dust or paint spray through the engine or clima system...🤔
that circle-cutting router jig is amazing
Thanks!
Thank you for supporting the channel.
I will use it carefully for content creation.
As a maker and admirer of perfection your videos come over as soothing and asmr
Thank you so much. You have been a huge inspiration as well as a wealth of knowledge. I have learned so much from you in the short time I have been woodworking!
Аплодисменты стоя! Браво!
Doubling as a dust collector with enough airflow is a big benefit I did not realize, thanks for the video.
Really nice work! Thank you for your very detailed videos.
Cool. Put led strip inside that to make it easer to see while painting.
I love your videos, they are pretty instructive and relaxing.
Blowing that paint air straight into all the other rooms connected to that vent ;)
also suitable for soldering booth.. very nice..
Хороша витяжка! Здоров'я понад усе. 👍👍👍
天才ですね！
Как всегда, на высоте!
Nice build, some quick release mechanism on the fan would be a nice addition to it. :)
He's probably on it already
How a very nice and very practical. One little suggestion, maybe stick some aluminium foil paper to the inside of the chamber for easy cleaning when color spary. thanks
素晴らしい完成度。メーカーもこれを見習って欲しいもんです。
I just use a cardboard box, a 4" 200cfm fan, some ducting and a lot of duct tape. I spray paint every day and I never have to deal with paint fumes or dust from hand sanding small parts. This is way nicer though especially if you don't have a need for a paint booth daily and don't want something that big taking up so much room.
nice work homie ☺️
Félicitations ! Ils sont des personnes qui sont des génies, et vous en êtes ! Magique la cabine à peintures de sa conception et de la méthodologie apportée, ainsi de son environnement des autres outils dont vous êtes le concepteur ! De cordiales civilités Patrick
Me gusta el ritmo tranquilo del trabajo, la precisión, y sobre todo, el silencio, sin comentarios. Me suscribo al canal !
Very nice!!!!!!! What CFM of this fan?
Another excellent, no need for words your videos explain everything.
Wouldn't some sort of filter fabric be better if you're using it for paint? Those particles will stick to your fan blades pretty fast and build up, resulting in vibration issues over time.
And if u want to build something like this, try to find extractor with engine outside of the tube, paint fumes ale flamable and can ignite from engine ;/
Yes, it's the way to the fan's quick death. It must have filter in coming stream or situated outside it. But in general, idea is interesting.
And weirdly - there is already a extractor fan in his wall, why does the extractor/spray paint booth need its own fan when he is plumbing it into an external one? Both will get damaged - it needs filtration and whatever he is extracting with it will be blown outside
@@szaibot Dayton fans and ventilation builds several. Check them out. There’s also a few others. Be safe!
Yes. I painted a full size car and built a temporary paint booth. The fan lasted long enough to complete the job. Three stage paint and nasty VOC fumes. I used a HEPA filter to reduce particulates. If I do it again I will run the exhaust fan via belt drive.
That way I can use a solvent to remove paint from the fan blades. Using an AC motor to prevent arcing(explosion)from DC motor brushes. This foldable paint booth has a well designed plenum. 🧠
Hello dear friend! I really like your videos!!! Please tell me which camera (model)do you shoot your videos?
Awesome video, as usual! Why is it that UA-camrs that don't talk use excellent microphones, and UA-camrs that talk use poor microphones?
Great video and idea in general 👍🏻
Excellent work!!!
Beautiful work as always. We featured this video on our homemade tools forum this week :)
Super
Dankeschön fürs Zeigen
gracias por compartir tu magnífico trabajo Maestro
Здорово, только сам вентилятор надо монтировать подальше от рабочего стола и через систему циклона. Так будет меньше шума в рабочей зоне, вентилятор меньше будет забиваться мусором, ну и сам мусор будет оседать в системе с циклоном. Вообще в мастерской должна быть единая система вентиляции с циклоном. А данная вытяжка на рабочий стол к ней просто подключаться.
Hello
I couldn't think of a cyclone system.
Thank you for the great idea！
*COOL BUILD!*
0:45 Those screws seem really annoying. Seems like it would be easier to have half of the ring fixed, and the other half on a hinge and latch which you can just open and swing out of the way when installing the fan. You'd probably have to make it thicker and more heavy duty.
If you are worried about that half of the ring not being screwed down you could make some sort of keyhole slot things which could grab some low profile bolt heads so that way that half of the ring would still have solid support.
COOL !!!
Very cool
Very nice. 👍
Very nice..thank for sharing
Отлично, для не больших робот. Спасибо.
great job,just add a panel filter on the top inside of this box, a filter between two grids for example , close to the motor intake. and it will be perfect.and your motor will last longer.and paint or other particules wont go anyway.
Sorry to be off topic but does any of you know of a tool to get back into an Instagram account..?
I stupidly forgot my account password. I love any tips you can give me!
@Juan Watson Instablaster :)
@Richard Mathew Thanks for your reply. I got to the site through google and Im trying it out now.
I see it takes a while so I will reply here later with my results.
@Richard Mathew it did the trick and I now got access to my account again. I am so happy:D
Thank you so much you saved my ass !
@Juan Watson glad I could help :)
What is your source for the non-wood components you use in your projects? ie, bearings, fans, metals etc. I have noticed that they are ommitted from your plans as well.
Amazing
bonjour génial ta cabine de peinture est qui est possible de me dire de quel modele de ventilateur que tu a mis en te remerciant bien d'avance
Really nice design... well done !
awesome bro
Very good idea.
Be careful spraying solvent based paints. If that is not an explosion proof fan it would only take one spark to ignite a flame.
It can be a big big fire.
Your video's are so inspiring.
こういうの欲しかったです！
焼肉用のダクトも作ってみてほしいです！！
Super !!!
на высоте!
SUPER!
Amazing!
👏👏👏
ダクトファンの固定はネジじゃなくて、パッチンフックだったら完璧だと思います。とても素晴らしい考えてと作りでした
Very Nice
I would be happy if you could share my video on your SNS.
très beaux travail et ingenieux
Bel lavoro!👍👏👏
Un po' di materiale fonoassorbente ed un filtro aria Carboni attivi ed è perfetto!!..Ing..👍🙋🏻♂️
Do you have a link to the blower you used?
Какой диаметр вентилятора, и характеристики, обороты и сколько кубов воздуха в минуту производит!?
저렇게 설계하면 와류가 생기지 않습니다. Good
Sehr schön gemacht... aber ohne Filter? Bitte richtig durchdacht bauen
Awesome!
Did you vent this into where (outside), I hope, or into a dead area/ zone.
hola me encanta tusvideos
Love it!
Great booth for smokers
great, i'll follow one like that, very handy and helpful..thanks 👍
Excelente!!!!!!
Excelente..., muito técnico!
Abraço aqui do Brasil 🇧🇷
Thanks for sharing that
フィルターはつけなくてもいいですか？
Nice concept, problem is you filter first to keep the environment clean, second to protect your fan from the over-spray buildup.
Perfeito, muito bom mesmo.
What a creative and skilled guy! Such an inspiration and great videos!
Just have one question for you DUI people:
What kind/kinds of "double-sided (easy) removable tape" have your tried and would you recommend?
The ones I've tried have been very expensive AND horrible to remove!!
Now I'm using normal "masking tapes" (used for painting, etc) and folds them so they work as double-sided tape, as it's cheap, very easy to use and to remove without any trace of the used glue/adhesive on wood, tools, etc.
But I still would like a good double-sided tape :)
Be creative and careful out there (y)
JSK has replied to this question - "I use this double-sided tape. amzn.to/2rnNSkl
However, I use four different types of double-sided tape depending on the application."
What’s the name of the fan you use for the booth
Great idea! :D
Чудова ідея!
Hubiese estado genial si hubiese facilitado un despiece detallando las medidas.
De esa forma no habría posibilidad de fallos.
Gracias y un saludo.
Paint can stays in your other rooms if your main ventilation fan is less powerful. And your fan bearing will collect all paint and will rotate slower and louder. You uploaded the video 2 years ago. How does it work know?
just imagine what he could do with a full-sized screwdriver.
nice
What is plan coast in U.S ?
What Fan do you use?
Sangat inspiratif....
Nice build! Are you planning to add a filter?
10:50👍👍👍👏👏
Нужно ставить фильтр перед вентилятором, что снизит его эффективность или найти вентилятор с вынесенным из потока двигателем. Хотя я таких маленьких не встречал никогда. В противном случае вентилятор, через который будет идти запыленный или с аэрозолью поток воздуха, долго не проживет.
At 2:45 I thought you were going to light a cigarette. I have something similar made with cardboard, but without the fan, so, thanks for the idea. Cheers.
HI, love you channel and the job you do, congrats and thanks, i want to ask if you have the video of the vertical saw that you show in this video, thank you !!
You're AWESOME! I love your projects!
I've been thinking about doing something like that for a long time, mainly to avoid dust on my workshop (which is also the balcony of my apartment here in Brazil).
My other purpose is noise reduction, maybe adding some internal foam layers, don't know.
I didn't get this part 13:00 . Is the plastic for blocking the dust?
Nice build👍 But I have a question. Where is the dust filter or spray filter? I don't think it is good idea press all dust or paint spray through the engine or clima system...🤔
It occurred to me to repaint my old range hood, redo it a little, install a stand, and just do it
Класс...!!! 😊 😊 😊
完成品は買えますか？完成品の重さは？
Could one also add a slot to hold home AC filter?
how much max CFM of this fan?
Very impressive ... I will make one of these & vent exhaust into mother in law's bedroom as shown @ 17:54 ... 😈
What is the diagonal piece for?
整流板です。
効率的にミストを吸い込めるようになります。
相変わらず丁寧な工作ですね。作っている途中で壁側に換気扇付けた方が良くね？と思いませんでした?（笑
とうか、付いてますよ・・・壁側にも。