hello from the Czech Republic! two weeks ago I had a flat tire on my 🌟KS-S16-PRO🌟and i did basically the same thing as you but it took me 6 hours to figure it out DIY! :D The unicycle is excellent in every way, I have 650 miles on it and no problems except for a flat tire, I can go 40 miles at an average speed of 25 mph and still have 13% battery to reach home ♥
This was a fantastic and extremely informative, step by step process, of how to change a tire for the S16! This video will definitely be useful down the road when I need to change my tire.
Great step by step ......the EUC manufactures objective this year should be ease of serviceability ... every model always have to be a super chore for wheel removal no matter what brand
Appreciate you guys making these maintenance videos!! Only gripe I have about my S16 Pro is that my upper side panels don't have those grub screws so my plates are only friction mounted. Seems they updated the design in subsequent batches which is awesome because the grub screws keep the plates in place, one of my plates wiggles around a bit if I use the stock pads due to the lack of the grub screw.
Tenho um S16 tem alguma manutenção preventiva q preciso fazer, sou novo no mundo do monociclo e meu S16 está com 500km apenas Gosto muito dos seus vídeo, mais pra frente gostaria de pegar um begode extreme por causa da suspensão de 130mm oque você recomenda?
Followed this tutorial very carefully but my wheel won't turn on now, it's also been sitting idle for 2-3 weeks. Could it be possible the battery is completely dead? Should I plug it in , is it safe?
Thank you!! It was a lot easier that expected. Is it easy to unplug the speaker wire and delete the speakers? The speakers look like giant nut sacks to me and I'd rather ride without them since I don't use the speakers anyway.
Excellent video, thanks, although I agree it's sad that this is so complicated. Also, it wasn't obvious how you discharged the capacitors - did you just turn the wheel on with the battery disconnected?
How much do you thing the wheel and motor cost? I bent and cracked my wheel. It still works though I was just wondering if you had an idea. I had the same wheel s16 pro
Massive thanks from the UK. I get huge wobbles when braking over 20kph. Will a tyre change help? I lowered it to 16 psi which helps but it tracks badly, (me 72kg). Make/model of yr street tyre? Speaker deletion is another reason to change the tyre! We don't balance wheels like on a car, should we?
Good video, On my second tire change with KS S16 pro,, not happy,, it's difficult,, it seems I'm getting too many flats,, the way the valve stem is positioned is a big problem, KS could have doe a better job,, definitely a lowering of standards here, not too many miles but the rollers are already falling apart, just poor quality in general
I was just thinking this looked pretty difficult compared to my Lynx. Hopefully manufactures start designing new wheels with ease of repair/maintenance in mind.
Another nightmare tire removal. Put the tube in the tire. Use 10 or so zip ties to squeeze it, insert the stem in the rim, slide the WHOLE ASSEMBLY EASILY in the rim groove, cut the zip ties. Done
The s22 has a far better motor removal process where you pass the entire controller through the frame body. keeping the controller closed sealed and untouched. I feel the 16s is a downgrade in this respect. Great tutorial thankyou
Thanks for making some of the best instructional videos for EUC riders on UA-cam!!!
Thanks for watching and supporting the channel!
This chanel has wrong name, should be "Wheelkipedia"!!! GOOD WORK TEAM ❤❤!!
Hahaha
hello from the Czech Republic! two weeks ago I had a flat tire on my 🌟KS-S16-PRO🌟and i did basically the same thing as you but it took me 6 hours to figure it out DIY! :D
The unicycle is excellent in every way, I have 650 miles on it and no problems except for a flat tire, I can go 40 miles at an average speed of 25 mph and still have 13% battery to reach home ♥
I should've released this earlier then! Wow, that's definitely more range than I get on the S16. One of the perks of being a BIG boi.
This was a fantastic and extremely informative, step by step process, of how to change a tire for the S16!
This video will definitely be useful down the road when I need to change my tire.
Awesome! That's what it's here for. I'm hoping it lives into the ether so it continues to be helpful for the 5 years!
Excellent video! Thanks for all the tips and tricks !!
I'm glad you found it helpful!
Great step by step ......the EUC manufactures objective this year should be ease of serviceability ... every model always have to be a super chore for wheel removal no matter what brand
Plug in batteries so i can cheaply UPS them and fly the wheel to Spain, also carry spare.
Check out Inmotion V14 and Begode Falcon.
V14 is super easy to maintain. Video coming out soon
Appreciate you guys making these maintenance videos!! Only gripe I have about my S16 Pro is that my upper side panels don't have those grub screws so my plates are only friction mounted.
Seems they updated the design in subsequent batches which is awesome because the grub screws keep the plates in place, one of my plates wiggles around a bit if I use the stock pads due to the lack of the grub screw.
Yeah, first batch didn’t have the grub screws from my recollection
Outstanding detail.
Thanks!
Merci beaucoup vous êtes très professionnels encore merci
My pleasure.
Great video, thanks. Great to see what I have in store down the line.
No problem!
Thanks so much for this video
My pleasure !
Very informative video. Can you tell us the name of the street tire & size of the tire plz. Thanks for the content.😊
It’s a ChaoYang H969
3.0-12
@@2cells1pack do you have link to buy this tyre in europe? thank you for the video
Tenho um S16 tem alguma manutenção preventiva q preciso fazer, sou novo no mundo do monociclo e meu S16 está com 500km apenas
Gosto muito dos seus vídeo, mais pra frente gostaria de pegar um begode extreme por causa da suspensão de 130mm oque você recomenda?
Followed this tutorial very carefully but my wheel won't turn on now, it's also been sitting idle for 2-3 weeks. Could it be possible the battery is completely dead? Should I plug it in , is it safe?
You can test the batteries, or plug in the charger and see if it charges.
Love the videos keep it up!
Thanks!
Thank you!! It was a lot easier that expected. Is it easy to unplug the speaker wire and delete the speakers? The speakers look like giant nut sacks to me and I'd rather ride without them since I don't use the speakers anyway.
Yes, it’s super easy. We actually did the speaker delete at the end if you look carefully
@@2cells1pack Doh, commented before I finished watching the video. It looks much better without the speaker. Much appreciated.
Fkn speakers, I love the silence as i glide along country canals listening to nature doing it's ting
@@2cells1pack Do you still get the Beeps if you remove the speakers ?
Great video, please could you do one for the Begode Falcon as well
Will do it soon :)
Excellent video, thanks, although I agree it's sad that this is so complicated. Also, it wasn't obvious how you discharged the capacitors - did you just turn the wheel on with the battery disconnected?
Finde euch Super.Danke
Thanks
Question. would the slider mechanism of the s22 fit for the s16? Just wondering if it would somehow make the suspension/ride feel better.
How much do you thing the wheel and motor cost? I bent and cracked my wheel. It still works though I was just wondering if you had an idea. I had the same wheel s16 pro
I would be so nervous working around those capacitors. Looks easy to drop a screw on the pins.
I know they've been discharged but I still trust them.
Also, I just bought one of these. I will probably be watching this video a lot.
Hah, it's a fun little wheel. Being careful is what its all about.
I need the link for that tube, I just replaced mine but the stem valve sticks out to far.
Check with your local retailer
please show us the zip tie method , for a tire change also.
I don’t like the zip tie method, since it wastes zip ties and I think it’s not really needed
@@2cells1packIt would be good for the community.
The zip tie method, is a super easy way to get the tyre on and guarantees no damage to the tube.
Nice, thanks for doing this! Wonder how the street tire feels, looks like you could go tubeless too.
you bet! it feels absolutely amazing with this tire on. The 16" wheels can't do tubeless as there's not enough room between the motor cover and rim.
Hellooo, nice videooo ;)
It's really necessary to remove the lcd for disc unplugged the motor ?
Technically not. You can always maneuver around it if you really wanted to.
Massive thanks from the UK. I get huge wobbles when braking over 20kph. Will a tyre change help? I lowered it to 16 psi which helps but it tracks badly, (me 72kg).
Make/model of yr street tyre? Speaker deletion is another reason to change the tyre!
We don't balance wheels like on a car, should we?
16psi is super low. I would do 25-28psi at the lowest
Chaoyang H969 tire , speaker deleted!
When in a moving vehicle, don’t activate self balancing
Good video, On my second tire change with KS S16 pro,, not happy,, it's difficult,, it seems I'm getting too many flats,, the way the valve stem is positioned is a big problem, KS could have doe a better job,, definitely a lowering of standards here, not too many miles but the rollers are already falling apart, just poor quality in general
после прокола я не менял камеру а просто залил антипрокол-месяц катаюсь-давление не падает
Which one more rigid, falcon or s16 ?
Rigid? hm. They're different wheels imo.
Can you tell me which product the tire is from?
The tire comes from the Commander Mini stock street tire.
👍
omg the monstrosity @ 7:11 how long are those roller guides going to last?
Haha until the F22
Unplugging the phase wires and hall sensor to do a tyre change is so 2021
I was just thinking this looked pretty difficult compared to my Lynx. Hopefully manufactures start designing new wheels with ease of repair/maintenance in mind.
Tubes are so 2023
Haha. Yeah, the V14 is the best one so far
not a bad design....but the roller suspension well not a fan of it....
There are definite pros and cons to
Another nightmare tire removal. Put the tube in the tire. Use 10 or so zip ties to squeeze it, insert the stem in the rim, slide the WHOLE ASSEMBLY EASILY in the rim groove, cut the zip ties. Done
I just don't like wasting zipties when it's not really needed.
사라진 스피커 😂😂
Sharp eyes 😉 we didn’t want it there
Kingsongs and Begode display just terrible. This is the hardest tire change ever made
The s22 has a far better motor removal process where you pass the entire controller through the frame body. keeping the controller closed sealed and untouched. I feel the 16s is a downgrade in this respect.
Great tutorial thankyou
Yeah, but the way they secure the phase wires is better. The old way would result in broken caps over time.
Ahhh!!!, cualquiera lo puede hacer, cualquier sientífico de King Song......😂