Veteran Patton - Tire Change

Поділитися
Вставка
  • Опубліковано 28 січ 2025

КОМЕНТАРІ • 95

  • @mr_wrongway
    @mr_wrongway Рік тому +18

    These vids are so valuable! Awesome work!

    • @2cells1pack
      @2cells1pack  Рік тому

      Thanks for the support!

    • @BonheursurSeine
      @BonheursurSeine Рік тому

      I don't know who this @mr_wrongway is but he is right to me in his comment !!! Nice job !

    • @2cells1pack
      @2cells1pack  Рік тому

      Hahaha thanks

    • @fqqures1019
      @fqqures1019 Рік тому

      @@BonheursurSeinewhat comment

  • @oldretireddude
    @oldretireddude 2 місяці тому

    Thank you, thank you, thank you! I just had a flat after 1550 trouble free miles and this was perfect. I'm mechanical but all these screws are intimidating.

    • @2cells1pack
      @2cells1pack  Місяць тому

      Haha, don't need to be intimidated.

  • @Micksoffthings
    @Micksoffthings Рік тому +2

    I counted 58 bolts and screws 😲

  • @JonahHax
    @JonahHax Рік тому +3

    Thanks for making these videos Albert and Alberts assistant 😀 Very helpful for everyone. About the crossthreading of screws. I always use handtools first and turn the screw the 'wrong way' first, until I can feel the screw click into the correct groove, before I screw it in.

    • @2cells1pack
      @2cells1pack  Рік тому +1

      this is absolutely the right way to do it.

  • @OliGerard
    @OliGerard Рік тому +1

    Great video and useful content. Very well explained. As already said a great new channel 👍🏻

    • @2cells1pack
      @2cells1pack  Рік тому

      Thanks!

    • @2cells1pack
      @2cells1pack  Рік тому

      I saw your message. We didn't measure all the different screws unfortunately. Perhaps ECODRIFT.RU may have that information. Our content is more focused on the average person, whereas ECODRIFT gets very technical.

  • @Onelastrun
    @Onelastrun Рік тому

    Yall do a fantastic job! Great camera angles!

  • @oliverer3
    @oliverer3 Рік тому

    Heads up for anyone intending to do this, if you only want to disassemble one side of the wheel make sure it's the left side as the mudguard bolts can only be removed from that side.

    • @2cells1pack
      @2cells1pack  Рік тому

      you HAVE to do the left side, as the right side has the motor cable as well. There's no choice on this matter.

    • @oliverer3
      @oliverer3 Рік тому

      @@2cells1pack Funny I never noticed that quite a bit more consequential detail. xD
      I guess I was too busy being annoyed that I had to remove the other side too.
      But hey, at least I managed to repair the damn thing after a single ride in the rain killed it. Thanks for the assist!

    • @PBTfpv
      @PBTfpv Рік тому

      @@oliverer3 a single ride in the rain ruined your Patton?! Tell me more!

  • @David-VdV-Dendermonde
    @David-VdV-Dendermonde Рік тому +2

    Love it, thank you

  • @Dom6879
    @Dom6879 Рік тому +1

    They should add more screws

  • @milordas
    @milordas 11 місяців тому +2

    9:55 To be mention, one of the bottom bolts are a little shorter

  • @DavidBuiltjes
    @DavidBuiltjes Рік тому

    excellent video really clear and detailed it will be very useful. Thanks

  • @jerome-aimar-korobkoff
    @jerome-aimar-korobkoff Рік тому

    Great video thanks so much for this share

  • @RonnieRides
    @RonnieRides Рік тому +2

    Do you happen to have the torque specs for the screws on that clamp?

    • @2cells1pack
      @2cells1pack  Рік тому +2

      I do not unfortunately. Manufacturers as of right now - do not publish any articles with that info.

    • @RonnieRides
      @RonnieRides Рік тому +2

      @@2cells1pack that's unfortunate, if you get the chance maybe you could shoot that question to LeaperKim representative? Would be great to know!

    • @2cells1pack
      @2cells1pack  Рік тому +3

      I asked ... and they said there is no torque spec. We tried.

  • @TheMoboarder
    @TheMoboarder Рік тому

    Solid video! Thank you.

    • @2cells1pack
      @2cells1pack  Рік тому

      Thanks!

    • @TheMoboarder
      @TheMoboarder Рік тому

      Hoping batch 1 will be shipping soon Weather is getting really nice here. 😊

    • @2cells1pack
      @2cells1pack  Рік тому +1

      I believe batch 1 is getting to eevee's VERY VERY soon.

    • @TheMoboarder
      @TheMoboarder Рік тому

      @@2cells1pack oh good!!!! Yeah!

  • @RonnieRides
    @RonnieRides Рік тому +1

    Awesome video, will be very helpful for the community. 🙏

    • @2cells1pack
      @2cells1pack  Рік тому +3

      This is my goal. I'll make the niche-boring videos that will prove helpful for years to come. Instead of focusing on the videos that will garner huge view counts off the bat.

    • @RonnieRides
      @RonnieRides Рік тому +2

      @@2cells1pack I think these kind of videos are very appreciated and can get decent amount of viewers

    • @2cells1pack
      @2cells1pack  Рік тому +2

      I think it will over time - but the people who will watch these videos are the owners of this specific wheel. Compared to new wheel videos that can be watched by the whole community of riders.

    • @JonahHax
      @JonahHax Рік тому +2

      @@2cells1pack I think videos like these also helps in determining if you want a specific wheel or not depending on how easy it is to work with and how bad/good it's made.

    • @2cells1pack
      @2cells1pack  Рік тому

      That's a very good point that I did not think about.

  • @volvlov759
    @volvlov759 Рік тому

    Does the Patton not come shipped with the batteries installed? What a pain in the butt if true!

    • @2cells1pack
      @2cells1pack  Рік тому

      Yes they do, the wheels that are air shipped cannot be shipped with batteries. But the normal boat ship for wheels that people buy, do come with their batteries. Pre-installed

  • @johnnygovroom
    @johnnygovroom Рік тому

    Hey guys, thanks so much for the video- an you please do a rim swap for the wheel? Or a short video on key points, I bought the wheel, and have dented the rim 2x at 35 psi, its ok for now, but i don't have much faith in the rim longevity.
    Please and thank you...!!!

    • @2cells1pack
      @2cells1pack  Рік тому

      There is only one problem with that video, leaperkim has told me that they will not sell rims. Just full motors

    • @johnnygovroom
      @johnnygovroom Рік тому +1

      @@2cells1pack , my heart 💔thanks for the quick reply…

  • @ekkibe1968
    @ekkibe1968 Рік тому

    Thank you very much for making this video! Great work!
    Do you know of any specific street tire for the Patton?

    • @2cells1pack
      @2cells1pack  Рік тому

      There are a couple options out there. I'm pretty sure most 16" tires will fit.

    • @ekkibe1968
      @ekkibe1968 Рік тому

      Thank you very much!

  • @grzegorzpieloch5752
    @grzegorzpieloch5752 23 дні тому

    Patton 50S czy starszy model ?

  • @omarilewis2871
    @omarilewis2871 Рік тому

    appreciate the video labeling. little things like that really make a difference. definitely looking out for more content.

    • @2cells1pack
      @2cells1pack  Рік тому

      if there's anything else we can do to make your experience better, let us know.

  • @nicrangal6830
    @nicrangal6830 8 місяців тому

    Sorry, you have not shown the position of the different lenght screws at the top of the shell..

    • @2cells1pack
      @2cells1pack  8 місяців тому

      Sorry, I don’t remember off the top of my head anymore

  • @CrossroadWater
    @CrossroadWater Рік тому

    This is great, thank you so much : ) What torque setting do you use on your drill?

    • @2cells1pack
      @2cells1pack  Рік тому +1

      Weak setting! It’s a ryobi after all (brushed motor non HP+) hahaha

  • @gavinzooms
    @gavinzooms Рік тому

    What’s the torque level on those clamp screws? Stripped one of the holes cuz I hand tightened too hard…

    • @2cells1pack
      @2cells1pack  Рік тому

      no idea. unfortunately manufacturer doesnt release specs.

    • @gavinzooms
      @gavinzooms Рік тому

      @@2cells1pack ewheels recommended the same torque as the axle bolts on those smaller bolts… I don’t think that’s right😅 I’ll try different torque levels on the old piece to see when it strips and report back🫡

  • @WestonFromColorado
    @WestonFromColorado 11 місяців тому

    I changed my rim on the Patton, and after putting it back together, it wants to take off full speed, and I have to lay it down, instead of balancing. Any idea why?

    • @2cells1pack
      @2cells1pack  11 місяців тому

      Check your phase wires? Did you unplug them ?

    • @WestonFromColorado
      @WestonFromColorado 11 місяців тому

      @2cells1pack I didn't mess with the control board wires (not sure if that is where the phase wires are). Just unplugged the battery wires (red and blue). I was able to change the rim with the control board still attached. Do you think the motor could have been put on backward? I kept the wheel wires on the same side as the control wires? The wires come out the left side of the motor, and attach to the left side of the control board. Thanks. I'll think more about the phase wires.

    • @2cells1pack
      @2cells1pack  10 місяців тому

      Yes, check the motor orientation as well.

  • @ДмитрийЧайка-р6у

    Hey, Albert! what street tire would you recommend for Veteran Patton? Thanks!

    • @2cells1pack
      @2cells1pack  Рік тому +1

      There was a really cool street tire that came with the commander mini, but if you’re looking for one readily available now - there are the street tires that came with the v12 and 16x that will also fit.

    • @ДмитрийЧайка-р6у
      @ДмитрийЧайка-р6у Рік тому

      @@2cells1pack I was looking into Michelin City Extra 90/90 -12 54P
      won't that fit?

    • @2cells1pack
      @2cells1pack  Рік тому +1

      I'm not too sure, the 90 profile might be a bit tall.

  • @sushiadventures4595
    @sushiadventures4595 Рік тому

    Nice video 👍
    Pour debrancher et rebrancher les cables batteries rouge et bleu il y a un ordre ?
    On ne voit le rebranchent de ces cables dans la video .

  • @CapitalWheeler
    @CapitalWheeler Рік тому

    How did the knobby perform?

    • @2cells1pack
      @2cells1pack  Рік тому +3

      Knobby tire is alright. We will talk about the stock tire in our upcoming review

  • @EclecticWizard6
    @EclecticWizard6 Рік тому

    Great video! Doing a tire change in a few days here and this should help greatly! Honestly doesn't look to bad just time consuming.

    • @2cells1pack
      @2cells1pack  Рік тому +1

      It’s not bad at all. These new wheels I find much better than the older ones

    • @2cells1pack
      @2cells1pack  Рік тому +1

      Do be careful not to cross thread any screws

    • @EclecticWizard6
      @EclecticWizard6 Рік тому

      @@2cells1pack Missed your response till now. Will do thank you! Also would you recommend re-applying locktite to every single screw on reassembly?

    • @6kidds81
      @6kidds81 Рік тому

      What is that I keep seeing it cross threading​@@2cells1pack

  • @TheEggman888
    @TheEggman888 Рік тому

    How long is the disassembly/reassembly ? I have a Kingsong KS14S right now and no joke it takes me 2 hours just to change a tire. If it's better i might consider upgrading.

    • @2cells1pack
      @2cells1pack  Рік тому +1

      honestly, it's hard to say on an individual's basis as everyone works at different speeds. I believe most EUC's are around the 2 hours mark comfortably.

    • @JonahHax
      @JonahHax Рік тому

      2 hours is not that long for something you might only do once a year. Better to be slow and careful than speed through the process and make mistakes or have lots of screws left over when the wheel is assembled 😀

    • @2cells1pack
      @2cells1pack  Рік тому

      It's definitely not bad at all. It's not like you're changing your tire every week :p

  • @landocycle
    @landocycle Рік тому +1

    Nice video mate!

  • @quentinmlc
    @quentinmlc Рік тому

    Thanks a lot ! The video is super helpful !

  • @TAR3AH888
    @TAR3AH888 14 днів тому

    🎉

  • @sby1076
    @sby1076 Рік тому +1

    patton is a good wheel....but definitely two issues here.....changing tire is so cumbersome....secondly, it s so hard to find street tire for this size :(

    • @2cells1pack
      @2cells1pack  Рік тому +3

      Honestly it's not that bad to do tire change. I'll take it over some older wheels like the 16x

  • @bjarkecarlsen6619
    @bjarkecarlsen6619 10 місяців тому

    Getting to the tirechange. Check. You forgot the tirechange step....

    • @2cells1pack
      @2cells1pack  10 місяців тому

      Sorry, I’ll do better in the next videos

  • @frankmain7619
    @frankmain7619 5 місяців тому

    Thanks for the video!

  • @Vince43euc
    @Vince43euc 6 місяців тому

    Merci beaucoup!! super helpful!!