Thank you for the video - as I have few Thunderbolt displays in hands. I have tried to use the MagSafe for older MacBook Pro and MacBook Air. I have grown to DISLIKE the power cable portion - it created the tension on the most precious Thunderbolt 2 connector, which I saw on many Thunderbolt Display. I have disconnected the Octopus cable's internal power connector, then cut off the external power cable. However, aesthetically, it looked ugly with the TB2-> TB3 adapter, plus the thickness of the the remaining cable. I really like your method of hiding the adapter internally and only has TB3 cable coming out. During my modification, I cut the 0.5m TB2 cable's plastic cover and it shows the "connector" exactly the length and style like the OEM's Octopus internal TB2 connector! So, I can use the connector's cover, without needing the glue! I also save Octopus cable's the white center "button" for the TB3 cable to pass through (again, with cutting and gluing) - now it feels like the TB3 cable was part of the TB Display... It suits perfectly for my M1/M2 Mac Minis. Thanks again for inspiring me to make this modification!
Nicely done! I just replaced mine and reeeally wanted to cut into the plastic cover on the end of the thunderbolt cable to see if it was long enough to fit. I was too scared since it was the only one I had on hand. I installed it without glue or anything but this is amazing. I will go back and install it "properly" once i get another cable on hand.
@@TheGrizzlyKnight It IS long enough, and fits perfectly! I've got video of the mod, I just need to edit and post it. I used a small cuttoff wheel to make two lengthwise cuts down the white plastic shell and popped it off. It appears to be the exact same connector as the one you find inside the display.
Colin... Thank You! A) I have 2 Thunderbolt Displays in front of me right now. (and 1 in storage with a bad tb cable!) B) I loved these things when I walked out of the Apple Store a decade ago with the 2 giant suitcases they come in. Specifically for the use case that you are resurrecting: a single ultra-clean umbilical cable across my desk to my MacBook Pro. The monitor itself was a dock with all of my peripherals attached. The minimalism was unprecedented, and you've made a way to bring that forward to 2023. So thank you. C) This opens up a Bunch of other options as well for other use cases that fellow owners may have, such as: 1- Just unplug both the TB and the Power, remove the umbilical, and that's it.....get rid of that annoying ass cable that I loved in the beginning but has been driving me crazy ever since. First of all you don't actually need it because you can send TB into the other port on the back of the monitor anyways. Unless you actually need to daisy-chain thunderbolt, which I do, so... 2- Remove the umbilical, leave the power disconnected, and Just add a new TB2 cable At Whatever Length You Actually Need!!! If you're not using a MagSafe laptop, that thing is just dangling around (with gaff tape on mine) not connected anyways, and I'm guessing not using the MagSafe power will extend the life of your display's power supply as well. Plus that cable was Always too short if you were say hooking these Thousand Dollar monitors to anything Other than a laptop on your desk. Say a Mac Pro tower....loaded with hard disks...and all the fans and heat, at my feet! (Where were you 10 years ago Colin!) 3- I'm guessing that Most people would benefit most from rather than doing that impressive power PD supply hack on the inside of the display, or even putting the TB3 to TB2 adapter on the inside, simply follow your umbilical removal technique, drop the power all together and replace with a New TB2 (at chosen length), which looks like it'll hot-glue down even cleaner. Then use that TB3 to TB2 adapter at the End of the new TB2 cable going into your TB3/4 Dock of choice, which can solve many other issues. You can Hide it and everything else you need plugged into it, and maybe bypass the dock built into the TB Display. And you can Hide it. So on the clean theme, while this display impressively minimized down to one cable and two connections, these new docks can supply TB Data, Displayport Video, and 100+ Watts Power all down a Single TB3/4 cable. Can't get any more minimal than One! (well wireless is coming...) 4- (Disclaimer: I read through the comments so I know you already addressed what other pointed out, and I agree with you on the price and length of these apple cables, but for anyone else...) If money was no object and you wanted the cleanest "Apple did it in 2023" upgrade, then you follow the video and remove the old umbilical, then install Colin's PD USB-C power mod ($?), then install the Apple TB3-TB2 adapter ($50) as described, and then... you install the 2-meter, midnight color, Apple USB-C to MagSafe 3 cable ($50) and a 1.8-meter Apple Thunderbolt 4 Pro cable in black ($130). Add some snakeskin cable wrap and some heat-shrink tubing and for a couple hundred bucks you have a new Apple Umbilical that does exactly what the old one did. (Now while that MagSafe cable is 50 bucks and I don't know an alternative, I'm sure you can find a matching aftermarket TB3 cable for Much Less than the Apple Pro one. And you could get both in silver closer to the OG theme. But whether you Spend less than a hundred or close too three, that money doesn't buy you extra functions, where just buying a TB2 cable and investing the rest in a TB3/4 Dock actually results in a cleaner setup, better Power Delivery, and additional functionality, while retaining All the original functionality.) 5- I'll be cracking mine open soon. But since you've shown us mere mortals the way, I wonder your thoughts on the other Elephant sized Apple in the room.... getting these Thunderbolt Displays to accept DisplayPort video information! For years I have regretted getting these Apple Thunderbolt Displays because at the time I also had two Apple Cinema Displays that were much less expensive and nearly identical, except... The TBDs had TB2 Docks built in, which as we discussed was amazing, for a while. Using the built in docks meant running all of the cables Up to the Monitor, which as much cable management as I did was always hideous. And I could just get a standalone TB Dock, and Hide it, which ultimately you had to do anyways if you need your computer more than a couple of feet away. Daisy-chaining a dock extends your range, and can tuck the rats-nest away neatly underneath or behind something. The built in was only used for USB sticks, iLok, BT dongles etc. No cables. So then the TBDs advantage went away over the ACDs, and the disadvantages became obnoxious. The identical looking miniDisplayPort connectors on the Cinema Displays could easily be converted to DVI and even HDMI. Not the Thunderbolt Displays. Even though Thunderbolt is just the PCI protocol and DisplayPort protocol on one cable using miniDisplayPort connectors. You can't get to the DisplayPort signal without TB Magic. At least that was the conclusion of many of us in the pissed off owners circle, back then... Do you know of any advancements in the past X years that allow us to use this monitor simply as a Monitor? As I just bought a 55-inch OLED with Dolby Vision for $350 bucks this last Black Friday, my anxiety levels have definitely diminished along with my dreams. But I do like the thought of sleighing this dragon once and for all! But at least you've shown me how to lop off a few of these Hydras' heads, even if I can't ultimately make them bow to my authority!
Glad to be of help! To your last point, you've basically got it right: the Thunderbolt 2 connector is the same as a DisplayPort connector. And the unmodified Thunderbolt Display requires a Thunderbolt port, it will not run off of simple DisplayPort. Meanwhile the TB2 port on a Mac will function as TB2 or DisplayPort automatically. I spent many many hours researching this and finally got to the bottom of how video is unloaded from Thunderbolt. From memory... Thunderbolt is a Ferry. DisplayPort is a car, as are USB, Ethernet, Firewire, Audio, iSight Camera, etc. They can drive on their own, or they can be carried on a Ferry. But a Ferry needs a special terminal, it can't go straight to a driveway! The Thunderbolt Display and your Mac have Intel's Thunderbolt chipset onboard, as do all Thunderbolt devices. This chipset loads 'Cars' on and off of the 'Ferry'. The unloading action on the Thunderbolt Cinema Display breaks out audio/USB/Ethernet 'Cars' to the ports on the back, and sends *one* video 'Car' to the LCD panel. Each Intel chipset is capable of unloading *only a single* video type 'Car'. It cannot break out video to go to the LCD panel and also send video in the DisplayPort format to the port on the back. Remaining 'Cars' still on the 'Ferry' are sent out the back port onward to other Thunderbolt devices. A second, third, or fourth Thunderbolt Cinema Display does the same thing. So to get a DisplayPort signal out of a Thunderbolt signal what you need is a Thunderbolt device with two ports, and no built in video device! That way, the Intel Thunderbolt chipset inside, can unload the video and place it on the output. In my previous setup I used a Belkin TB2 hub to accomplish this. I was able to run a DisplayPort monitor off of the Belkin hub's extra TB2 port. This can be done once, at the end of the daisy chain. My setup was: Macbook Pro 2015 -> TB2/Magsafe umbilical cable -> Thunderbolt Cinema Display -> TB2 cable -> Belkin TB2 Hub -> DisplayPort to DVI adapter cable -> DVI based Dell monitor So I had a TBCD and DP based display both running off of the single TB2 port on my Mac, no extra cables. It was nice for its time!
@@colindgrant Great analogy, I have been tinkering trying to get 2 x TB displays to work on the Mini M1but it its not possible. I suspect apple may have blocked it in the software driver but not 100% sure
@@symosys Each Mac has a given number of displays it can support, based on hardware resources. In the old days you had an individual video card for every display, and while the hardware has changed the resource constraints still exist. So while Thunderbolt may have enough bandwidth for many displays, the Mac still fundamentally has to have enough hardware resources to support each additional screen. My 2021 MBP 16" M1 shown in the video can support the built in screen, and my two external monitors using built in display-dedicated hardware. To drive the third screen I use a DisplayLink adapter, which borrows from the USB-dedicated hardware. You may be able to use DisplayLink to add another display. Good luck!
This is a great setup. I have a thunderbolt display and the new macbook with magsafe 3 and I wanted to use the magsafe 1 from the display. However, after watching this video I have decided it's too much hassle for me. But your tutorial is awesome anyway!
Excellent video - thanks! I too have an "intermittent" display cable and need to replace it and so will use your method. Here are two rather naïve questions. First, since I never use the MagSafe power cord anyway (I easily charge my MacBook Pro with its own charger) I'll just skip that part entirely, and replace the video cable only. So question 1 is - is there anything wrong with that plan? Question 2 is why did you need to do all the voltage conversion in the first place? Are the voltage needs of the new MacBook so different? Why isn't it just a connector change, like for the video? Lastly, I am not sure how to take the existing Magsafe power cord out of the picture - just unplug within the display, or tie it unused on the outside, unused, to the new 3/4 extension cable. OK - now to go out and buy some suction cop and T6 and T10 torx heads. What was the T number for the display frame, BTW? Thanks!
I’ll go in reverse! I don’t remember the tire size for the frame but a small set is worthwhile, in the T5-20 range. If you want to do the internal usb-c conversion you can just leave out the steps I did for the voltage conversion entirely. Remove the umbilical cable and just stuff the TB2 to TB3 converter inside like I did. The voltage conversion was to change from MagSafe 2 to MagSafe 3 which is really just Power Delivery over USB-C, a part of the USB spec. The monitor won’t care that you’re not pulling power from it. Good luck!
@@colindgrant Ah, I see, thanks. The great paradigm changing innovation of having anything: data, input power, output power - anything but analog sound, come over a single cable type must have had _some_ overhead in specs.
I was philosophically referring to the new specs being required of the entire industry to accommodate the upgrade to USB-c, but yes, they were required here too. (I just want to repeat that your walkthrough was super clear!)
Thank you I was able to follow up on this instruction and finished the mod. I used the original grommet and let the thunderbolt 3 to 4 adaptor's usb-c connector out of the monitor just in case I have to replace the extension cable.
Thanks! You’re right. I’m keeping the USB-C to Magsafe 3 cable that came with the MacBook for travel but it would totally work instead of the USB-C to USB-C cable I used for power.
@@colindgrant you could also utilize the thunderbolt extension chord you bought in combination with a usb-c multi port adapter which allows powerdelivery pass-through. This way you can get both power and data through one usb-c (thunderbolt) cable. At home I just connect one thunderbolt cable to my setup for both charging, display and peripherals.
@@atacant Thanks. I've seen those but not one that supports Thunderbolt. I think "video over USB-C" is a different transport protocol than "video over Thunderbolt", even if Thunderbolt is using a USB-C type connector. The Mac probably supports both, but I'm pretty sure these monitors are specifically looking for "video over Thunderbolt".
Hi, I have mostly completed this mod to my Apple 27" Display. Power delivery works a treat. It's been faultless. I am having troubles with the Thunderbolt > TB 3/4 cable placement inside the screen. When I then install the converter inside the screen, the USB2, FaceTime camera and Display Speakers drop off after about 10/15mins. I have tried multiple locations in the screen, but every time it plays up. My first point of call was the TB3/4 extension and purchased a different type but had the same result. To confirm my cables are good and working for long durations without fault, I moved the converter externally with just the short Apple Thunderbolt cable running out of the screen with the Apple TB > TB3/4 converter outside the screen. This then works perfectly and can't fault it. I then move it back inside the screen taking careful note of the USBC orientation, and it faults again... Placement of converter: mimic'd colin's placement from the video, tried further to the right above the speaker, and also to the left between the boar and the apple logo. I am in Australia, so we are 240v power here - wondering if I'm getting some sort of interference compared to 110v displays Could this be caused by heat issues from the main board? Has anyone experienced these kinds of issues with the conversion? Any input is very much welcome. Cheers
Really good detail here. I'm not sure what could cause this, but it seems like you've gone through the right steps to diagnose it. I kind of doubt 240V is the culprit - the display should be using the same total watts right? Lower amperage in fact, so potentially less heat. If I think of something, I'll comment back, but nothing comes to mind right now...
@@colindgrant Further update: wrapped the converter and connectors in aluminium tape to try and eliminate any interference issues (and yes too into account conductivity and covered potential areas with kapton tape). This brought on the issue ALOT quicker and completely killed the video signal after 10mins or so. This has lead me to it being a heat issue. I have since moved the convert further up and ontop of the apple logo give it far more air circulation, but am still having the extra functions drop off after 15mins or so (Display Audio, FaceTime Camera etc). Further playing around to be done. Out of interest, I have order a couple of different DP to USBC (TB2 > TB3) cables from Aliexpress to see what this does - will report back when it arrives. Don't have high hopes for these...
@@Johno_H That's so strange! The fans don't even come on in my monitors, and yet I don't seem to have an issue like yours. The DP to USB-C adapters you are seeing may be video-only. Those are the physical connectors but you'll need Thunderbolt 3/4 transport over the connectors, and to my knowledge only the Apple adapter does that. Nonetheless, please do report back!
Saw this video today, i had a similar idea for my thunderbolt display, but more like plugable one not the cable coming out of the display. for which i even bougth 40gbps coupler which didn't work coupling, so the project got stalled. i dont want a again a cable coming out of it, i want a thunderbolt female port, which is not there anywhere.
Very nice. The only video out there retrofitting these beautiful displays. I wish you spent more time in showing us a step by step in putting together the finished charge module. Everything else had an in-depth instruction except putting the 39.4 resistor , shottky barrier diode and voltage conversion module together. How was that resistor connected? Did you use only 2 pins in the shottky diode connections? which one did you cutoff?
Yes, I could have shown more of that assembly, but it's just the same thing that I did on the breadboard. The resistor goes across positive and negative. I showed that at 10:27. And yes I only used two pins from the schottky barrier rectifier (because that's the 'diode' that I had laying around). You just need a single anode and single cathode, and I discuss that around 12:30.
Great video and awesome mod to keep this tech modern. Similar question, maybe redundant but the barrier it connected through the positive wire connection right?after the resistor? Just want to clarify as I want to do this mod myself but I’m not as well versed in electrical wiring.
Really cool video! Absolutely love the thunderbolt display, especially with the fact they have built in speakers and a webcam. Do they still work after the conversion? Too bad they don't make them anymore and are incompatible with the newer MacBooks. Only thing that would make it better if you somehow converted to a single USB C cable for both display and power. Cool project none the less!
Everything works, including ethernet and all ports. I use the camera and audio daily. I did convert to a single cable for everything using an Anker TB3 hub.
I have a question, I have a Mac mini m1 and would like to do such a cable upgrade for the Apple Thanderbold Display. Would it be enough to just install a USB-C cable on the Apple Thanderbold display? The MagSafe cable is irrelevant to me. Thank you in advance for your effort!...👋🏻
@@colindgrant Thank you for the fast feedback! Then I will swap the original cable for a Thunderbolt cable. And again, thank you for the information…👍🏻
Hello Colin. I’ve attempted your mod with a MagSafe 2 to usb dongle from elecjet. However I’ve noticed it gets extremely hot and clicks without it being connected to the MacBook. I was wondering if you’d had any issues with your buck converter being constantly pulling current/getting hot without anything connected. I’m very much considering swapping out my current setup for the pd side of things with what you’ve demonstrated, potentially adhearing the bc to the case with some adhesive thermal pads to act as a big cooler
I tried one of those MagSafe adapter dongles before all of this and I too found it got extremely hot! That’s one of the reasons I pursued this project. Good news is that the PD power module doesn’t get hot at all and doesn’t appear to pull any significant current when it’s not powering anything. 👍
Enjoyed this video even if it doesn't work for me. Short history, MacBook Pro late 2013 and Apple TB monitor, new early 2014. Bought a late 2023 MB Pro M3 and used a TB 2-3 adapter for a year with no problems and of late sometimes would not wake up, then not at all with either the 2013 or 2024 MB's. On the 2013 the magsafe doesn't light up anymore. I tried a rear TB cable and the adapter to the 2024 and without to the 2014 with either. My understanding is the rear TB's do not work on adapters without the magsafe charge working. If the rear TB's are on the same board as the main TB & power cable, why would that be the case? Does your TB 2 to 3 internal cable replacement require operational magsafe power? I don't need the magsafe power and if this internal hack works without magsafe maybe I can keep the old monitor working. Is there a way to even see if the thunderbolt display turns on since there is no power switch (externally or internal) Thanks in advance.
I just completed this same change minus the power because my thunderbolt cable finally died from the bends. This video was very helpful, thank you! Although I has issues when connecting this to a new Mac mini. I ended up having to skip the thunderbolt extension cable you called out here. Apple thunderbolt cable to apple convertor was the only way it would work for me.
Thunderbolt extension cables are tricky. Technically they're not supported over a certain length. It's also critical that you get a true Thunderbolt compatible extension, because I've run into lots of USB-C extension cables that only carry power and USB, no video, no Thunderbolt. Glad to hear you were successful though!
I would really like to. But between Thunderbolt, USB-C, and Power Delivery standards, I'm just not sure how the power negotiation is supposed to go, and don't want to experiment on my brand new 16" M1 Pro! There are hubs that can do it though. Check out CalDigit.
if I just want to use it for video via thunderbolt, can I do like you did with the adaptor inside and use a thunderbolt 3 extension cable to my mac? leaving the magsafe unplugged inside? you did incredibly well everything, congrats on all the work.
@@JustChillingDom Yep, exactly. CalDigit has one. I don't know how to properly combine power and Thunderbolt, could be complicated, and risky to my laptop!
Thank you for this video. I did almost the same mod based on the information here. The major difference is that I started with the older led cinema 27" because it is cheaper and can be modded to give charge through a single connector. The only major difference between the two is the webcam. What I did was to replace the webcam with the one from the thunderbolt display. It is a straight swap and cost about €15. I then split the cable into the three separate cables (DP, USB and Magsafe) using a sharp knife. Magsafe I cut and modded the same way as here using a 39k and a 390 ohm resistor in series. The USB cable I replaced entirely with a much shorter one and the DP cable was terminated with a DP to mini DP adapter. All of these parts I then connected to a simple USB-C dock I found for about €15 on aliexpress and extended the cable with a USB-C extension cable. All of this of course with liberal amounts of shrink tube, a couple of zipties and even a ziploch bag to insulate the display cable. And a quick and dirty strain relief. Total cost was about €50 on top of the €200 display and it took me and my friend maybe two hours. It works an absolute treat. The biggest letdown is seriously that I wasn't sble to source a white braided USB-C extension cable.
That is so cool! I'm so glad you shared the details of construction. Do you know how to get more than 15-16V out of the display's power supply? Is that what the 390 Ohm is all about? I didn't know the two models were so similar, that's great. And DisplayPort gives you many more options, like the USB-C dock you mentioned. Ever looked at TB4 docks? They're not cheap, and there aren't many options. Meanwhile video over USB-C (alt mode I think it's called?) is more and more common. I like keeping older tech alive and it sounds like you do too. I'd love to see this project, and I'll bet lots of others too. Ever consider making a video? Let me know if you figured out how to get more voltage from the power supply. I'm curious about using it to power a TB4 hub with PD, in order to get down to a single cable.
@@colindgrant I'm not sure it is actually possible, or at least it not easy, to get more than 16,5V out of it. And even if you did it would be close to 20V and not the 21V requried for the PD adapter to deliver the 20V level of the PD specification. So we are pretty much limited to 45W without some major modifications to the power delivery setup. And I'm fine with that. When I dock my computer it is for hours so 45W will keep the battery topped up just fine. Persumably there could be a scenario with heavy power usage (I do CAD for example) that actually has to dip into the battery reserves to keep running. But I think that is a supported scenario. The 390 Ohm resistor was to make up the 39,41K resistor needed to start the magsafe circuit. The actual value isn't actually that critical. But I had 39K resistors as well as many other values. Bue to tolerances in resistors they could actually be quite a bit off the specified value, especially for my cheap ebay ones from many years ago. So I used 39K as a starting point and experimented with some combination until I got close enough. Yeah, they are pretty much identical apart from the webcam and the IO on the back which on the TB has the firewire, ethernet and thunderbolt daisy chain. And since you can't daisy chain two displays in this scenario those ports probably aren't getting used by most people anyway. The casing is certainly the same and the speakers, power supply and panel are supposedly identical. So the difference is the webcam and the control board. So in this scenario I would say the Cinema Display is the better starting point unless you already own the Thunderbolt Display and the adapter. I did consider a TB dock but they are far larger, harder to install inside the display and also cost something like €300 or more. I can't see any real benefit to that approach over mine. Maybe it would be possible to get some kind of daisy chaining going but that's it. I don't have the time or the skills to make a video out of this. I do have a few bad pictures I took. If you would like to make a short follow-up to this video using those pictures and do some commentary explaining what is going on I'd be very happy to see it out there.
This is cool, there are some small DP adapters out there which have a second port for power, too (elecjet) so both display and power are delivered via one cable. - The regular USB needs to be connected to allow camera + keyboard shortcuts - brightness, volume etc. (even for wireless keyboards which I found odd) From memory the cinema displays and Thunderbolt displays were available at the same time, a lot of refurbers prefer the cinema model claiming they are more reliable. - personally I don’t like the 3 adapters when connecting the conventional way.
would there be any way to combine the TB and power into one cable? iirc USB-PD negotiation happens over the power lines themselves so i wonder if the power pins going out could simply be injected into the outgoing cable?
I don't know how to combine USB-PD and Thunderbolt onto a cable electrically. I've looked into it a bit, and it's quite complex. The easiest solution would be to introduce a Thunderbolt 3/4 hub with Power Delivery to do everything over one cable. It's discussed elsewhere in this comment section.
It’s a shame you can’t get an adapter like Utab’s minidisplay model that supports a power feed, too. Would it be possible to link both MagSafe and Thunderbolt adaptors to a USB C splitter inside the unit for a single cable option or would you loose TB capabilities?
I agree but loss of TB could be fixed with a Thunderbolt capable mini dock, something like 'belkin-thunderbolt-3-core-dock', connected in the monitor case collecting the thunderbolt and the usb-c power into one cable should work?!!? You could even add a HDMI port to the back of the screen!
The USB thunderbolt extension USB cable that you listed in the description from Amazon didn't work on my both Apple Thunderbolt display 27 inches A1407. 😢
Thank you for the great video!!! I have a question. I'm already using another monitor that supports PD charging, so I don't need the charging function on the Thunderbolt monitor. I just want to convert the Thunderbolt 2 port to a Thunderbolt 3 port. In that case, not installing the charging module shouldn't affect the monitor's functionality, right? Thank you :D
Thanks a lot Colin for this amazing video! I currently have an Apple Thunderbolt Display (27 inches) and I wanted to change my current MacBook Air (13-inch, Early 2015) for a M1 MacBook Air and/or a M2 MacBook Air. However Apple is discouraging users to do that because they say material is not compatible. Apparently users are complaining about flickers and dead pixels appearing (top right). Have you experienced anything like this since you made the cable changes? If not, I wonder why the team at Apple would be fixing compatibility on M1 MacBook Pro and not fix it on the M1 MacBook Pro. Both computers must be very similar.
I have heard about the flickering and I can confirm I have no issues, maybe an update fixed this? I have an iMac Mini M1 with an original Mac Thunderbolt Cinema Display 27" and also an Apple 24" LED Cinema Display (Display Port), I use a powered via USB, HDMI to Display Port Adapter. The iMac M1 Mini will not support 2 x Thunderbolt Displays. They only support 1 x Thunderbolt and 1 x HDMI. -: Video Support Simultaneously supports up to two displays: One display with up to 6K resolution at 60Hz connected via Thunderbolt and one display with up to 4K resolution at 60Hz connected via HDMI Thunderbolt 3 digital video output supports Native DisplayPort output over USB‑C Thunderbolt 2, DVI and VGA output supported using adapters (sold separately) HDMI display video output Support for one display with up to 4K resolution at 60Hz DVI output using HDMI to DVI Adapter (sold separately) However the MacBook Pro M1 will support more depending on M1 chip: Display Support Simultaneously supports full native resolution on the built-in display at 1 billion colours and: Up to two external displays with up to 6K resolution at 60Hz at over a billion colours (M1 Pro) or Up to three external displays with up to 6K resolution and one external display with up to 4K resolution at 60Hz at over a billion colours (M1 Max) Thunderbolt 4 digital video output Native DisplayPort output over USB‑C VGA, HDMI, DVI and Thunderbolt 2 output supported using adapters (sold separately) HDMI digital video output Support for one display with up to 4K resolution at 60Hz DVI output using HDMI to DVI Adapter (sold separately) I am told the M2 chip has same limitations also.
Amazing video, it’s giving me some thoughts of picking up a Thunderbolt Display for my Mac Studio. Curious, is the MacBook able to control brightness and pass audio to the monitor speakers?
Yes! I can control brightness from the keyboard and both Thunderbolt displays show up as audio output options. I posted a 'short' that shows the brightness control from the keyboard.
@@colindgrant Woo! Thanks for the confirmation, Colin. Just picked up a mint Thunderbolt Display and can’t wait to convert it to USB-C. Owe all my thanks to you and this video.
Any reason why you replaced the thunderbolt 2 cable inside the monitor, and not just use the one it had by by plugging the adapter directly to it? Any advantages to that? Amazing video btw, it is very inspiring!
I talked about that a little at the beginning. I had to replace the TB2 cable anyway, and my goal was to match the design concept of the original Thunderbolt Display. Power and data to the laptop with no dongles or adapters, total freedom of movement within the length of the cable(s) to the laptop. Glad you liked it!
How do I get the VESA mount off of a Thuderbolt display ? Every video shows how to put it on but NO ONE says how to get one off. On the broken one on the street Tuesday night the glass was gone but the LED display was OK the back with you OK the cables are OK I’d like to see if I can repair it and get it working again. But I need to get the VESA mount off.
Thunderbolt displays don't come with a VESA mount. The have a tilting stand built in. I added a VESA mount to mine from a brand called Human Centric. Search for "how to remove thunderbolt display stand", there are lots of those.
@@georgesenda1952 I found your video. It looks like the previous owner attached an Amer VESA kit to it. That's not original, but you can see some pictures of it here: www.amazon.com/Amer-MD179ZM-A-AMR-VESA-Kit/dp/B01BHCEZ3W
@@georgesenda1952 Not sure, I've never held one. Looks like there's a head screw on the side. If you can't remove it, then just use it for mounting to a display arm. Removing it will only get you to the hinge that works with the original stand. It's not necessary to replace the LED or glass panel.
I don't understand why the Thunderbolt Display only supplies ~6V. From what I read on Apple's website, this display is supposed to deliver up to 85W. Assuming it outputs 5A that would be 17V. Does that mean the voltage is variable depending on what the Magsafe 2 connector is negociating with the internal power adaptor? So theoretically could we go DC to Magsafe 3 and the internal power supply would adapt the voltage?
@@colindgrant The original Magsafe cable is still good on my Thunderbolt Display. I'll find a way to mesure voltage between the display and my old MBA13 to see if it adapts to the load.
@@colindgrant I had the time to test it yesterday after finding by Magsafe to Magsafe 2 adapter. It started at ~3.5V and jumped quickly to ~6.4V as in your video. As soon as I plugged the MBA it jumped to ~16.6V showing 85W in the system info app. I think I will adapt your mod. Instead of using a buck converter I will put a USB-C female connector directly to the DC wires than connect my USB-C to Magsafe 3 cable into it. The power supply should negotiate with the Magsafe 3 connector but I'm not sure of that yet. Don't want to damage my MBA :-) What do you think?
@@emanuelvanasse Cool thanks for the info. 85W at 16.6V is over 5 amps! Wow! It would be interesting to validate if that much current is actually flowing, or if Apple is just telling us that it thinks it is connected to an 85W *capable* charger. The power converter I used was more than a buck converter, it also handled the USB-PD (Power Delivery) negotiation, which is something I'm 99% sure you will need for MagSafe3. You could plug the Apple OEM USB-C to MagSafe3 cable into the power converter I used, and that should work, but not at 85W. The MagSafe3 connector is essentially just USB-PD on a magnetic plug. I don't see how you can wire a female USB-C connector directly to the power supply in the Thunderbolt Display. Even if you get the display power supply to cough up the ~16 volts, you have to give that to a Power Delivery controller, and buck it down to the voltage level negotiated by the PD device on the other end, such as 5, 9, 12, or 15V. In other words, I don't see any chance for your MagSafe3 cable to talk to the Thunderbolt Display's power supply. Unfortunately they don't know anything about each other.
I followed the steps (video only - I simply unplugged the MagSafe) but now, with display plugged in, I get no video nor can I hear the display fan come on. I.e. The MacBook pro shows _no_ second display. I really don't know if anything is coming out of the 40 Gbps 240 W USBc cord at all. (I opened the display back up and rechecked that all the plugs seemed snugly in place. When lifting and closing the LCD panel, there are 4 connecters to deal with - A black plastic cable bus, the screwed-in ground wire, a 6-pin connect and a weird long flat connector (w/ no pins?). The long one is the only one that never felt like it connected tightly. It only went in label-down. For diagnostics, I have only an old analog multimeter. Might you have any trouble-shooting ideas? Thanks -SL
Here is my cautionary tale: My unit was 10 years old, and after I hot-glued into place the new cable and went to screw-down the video board, I tightened the screws too much, and three of the tiny brittle plastic towers supporting the screw sockets simply disintegrated, leaving the sockets unusable and the video board poorly reattached. Perhaps for that reason the monitor no longer worked. For lack of diagnostic equipment and knowledge, I abandoned the unit for parts. (I note that a less arduous fix is to buy a used cable like the original as a replacement, and live with the Thunderbolt 2->3 adaptor being outside the case, and just ignore the magsafe power cord).
Probably not as simple as a splice. With the right electronics, it could work. There are modern hubs that combined Thunderbolt 3/4 and Power delivery onto the same cable, with a single USB-C connector to your computer. I would assume you can plug Thunderbolt 2 into such a hub through the Apple Thunderbolt 2 to 3 adapter. The Apple adapter does not handle power, just TB signaling conversion. I have not seen a simpler way to combine TB2 and power onto a single USB-C cable.
Seems a little risky when it comes to removing the logic board. But yes, I just might try. My Thunderbolt Cinema Display is the best monitor I've used so far when It comes to picture clarity. Not very ergonomic if you use the standard stand though. Right now I power my MacBook Air M2 with the MagSasfe 3 and connect the Cinema Display with Apples Thunderbolt to USB-C connector. It seems to work really well. When I used my earlier MacBook Air M1 I experienced so much flicker that I discontinued using it and had to replace it with inferior monitors.
Incredible. I have two of these monitors collecting dust. I have plans to build a workbench in my basement storage area near my lab rack. Your work just saved me from selling or chucking the ACD's. Please share updates if there are any!
That's great! It's awesome when you can extend the life of good but older tech. By the way if you have the older non-Thunderbolt display you can just use a USB-C to DisplayPort adapter instead of the Thunderbolt 3 (USB-C) to Thunderbolt 2 adapter. I'm happy to report this setup has worked very well since posting a year ago. Good luck on your workbench build!
You're thinking of USB Power Delivery (USB-PD), Thunderbolt 2 doesn't do that and these are Thunderbolt 2 displays. Only about 15W available for accessories. I would have to introduce a Thunderbolt 3/4 hub with Power Delivery to do everything over one cable. It's discussed elsewhere in this comment section.
Hi Colin, Can i check if your setup can do brightness control using "Ctrl + F1/F2" keyboard shortcut? I am having an M1 iMac and connect to 24" LED Cinema Display. I am unable to control the display brightness using this keyboard shortcut, but am able to do so with my Intel 2015 MBP. Hence, I am using a 3rd party app known as MonitorControl on my M1 iMac to control the brightness.
It works on my M1 Mac using Control (^) + F1/F2...most of the time. I have noticed that sometimes after resuming from sleep, one or both of the external monitors will not respond to the keyboard shortcut. When this happens, I can go to Displays settings and see that the brightness slider is missing there as well. The fix is to unplug monitor power for 20+ seconds, then unplug/re-plug the Thunderbolt cable. Definitely non-ideal.
Why retrofit the magsafe 2 into usb c rather than into usb a and use a USB a to magsafe 3 cable? You'd save a tb4 port on your laptop and actually make use of the magsafe 3 port. Did I miss something?
Yeah, that's another option. And that would definitely work with the way I converted Magsafe 2 into USB-C PD inside the monitor. It's a personal preference. I'm reserving my USB-C to Magsafe 3 cable for travel. I could have bought another but they're $50, and I actually like having the USB-C power delivery cable on my desk for temporarily powering other things. The intention with this retrofit was to have a very clean desktop and not plug anything else into the laptop, so I was ok with using up an additional TB4 port but I see your point on that.
Colin I saw your video and I am really inspired to do this mod as well. A couple of questions. 1. How aviod being shocked? I am a bit afaid to mod this. 2. Will this moitor work if i just remove the all in one cable and use the out side thunderbolt port? 3. Will this work with a half mod without doing the power delivery usbc?
Just to follow up, yes you can do just power or just data. No need to do both. The safest way to avoid being shocked is to leave the monitor unplugged for a couple weeks before opening it.
It cool video Im using a Macbook pro 2017 and Thunderbolt display 27” When using Mac os Ventura every thing is ok, no issue But when i running windows 11 install by bootcamp, Thunderbolt display not working Please help me, thanks you
Thanks for this informative video. I have a Mac mini M1 connected to an Apple Thunerbolt Display. So I don't need the power cord. Now the Thundebolt cable seems to give up the ghost (occasional, short-term blackouts). Can I just replace the Thunderbolt cable with your method and leave the connector for the power cable empty?
Yes, you could use this method to put the adapter inside the monitor case and run a USB-C cable down to your Mac Mini. Or you could use the method recommended by @DavidMalcolm above, just buy a TB2 to TB2 cable, plug it into the port on the back of the Thunderbolt display, then coil up your original umbilical cable and ignore it!
When the display is flickering, why does everyone feel confident that the problems stems from the thunderbolt cable, but not other components like the logic board or the power supply. Thanks for the walkthrough though.
@@leonugraha I had the same skepticism and questions. I can only share my experience: - With single TBD plugged in using original cables. - Same symptoms on 2015 MBP w/TB2 and also 2021 MBP M1 w/TB2-3 converter. - Display would suddenly go fully black (not backlit, as if unpowered), with no obvious cause - Display stayed black, did not flicker, did not self recover - Occurred with no physical movement, no particular temperature, no change in peripherals, no identifiable length of time, or pattern of app usage. - Arriving at my desk in the morning, display would often not wake up. - Unplugging/replugging the TB2 cable would sometimes bring back display image, sometimes peripherals like iSight camera or built in speaker would come back as well, sometimes not. - Only reliable recovery method was cycling power on display and rebooting laptop. - Even while things were working, I could feel heat on the TB2 connector at laptop. - Easiest test is to unplug the built in TB2 cable, use a standalone TB2 cable plugged into the daisy chain socket on display. It's an all digital connection, so I think this was an issue of some signaling or voltage threshold being violated. Or perhaps the shielding was broken down and allowing interference. I believe the laptop detected something was out of bounds and just shut it down. I didn't look for logs, but there may be some. If your display comes back on its own, that may be a different issue.
If you know of a way to inject *Power Delivery* into a cable carrying *Thunderbolt* signals, I'm all ears! I don't know of a simple way to combined TB and PD, short of using a hub.
What happend with Mac mini or Mac Studio? Can the mac mini or mac studio with M2 be connected to the apple thunderbolt display or is there incompatibility? Do I necessarily have to use the Thunderbolt 3 to Thunderbolt 2 adapter? Or should we proceed another way? Should I use the same display cable or another one? Or is it possible with the mac M1 but not with the M2?
M1 and M2 don't really have anything to do with this modification. This video deals with converting the Thunderbolt display from Thunderbolt 2 (DisplayPort connector) to Thunderbolt 3/4 (USB-C connector).
It just has to be a 60W+ USB-C compliant cable. Nothing special. There are tougher cables, but my experience Apple cables are reliably compliant, so it's what I reach for. It didn't matter so much before, but in the age of USB-C, there are a lot more requirements of the cable, and many cables simply don't meet them.
you should make a kit or a sell It completed. you will make money on that for sure. I want to do this conversion, but it sounds like to much for me. IDK why they don't just make a magsafe to usb-c adapter. I know there is one but that's so bulky and really a whole adapter block extra instead of a simple small adapter
I tried that first and it was awful. The adapters are bulky, the Magsafe adapter overheats and connection light becomes useless, plus there is lots of stress placed on the USB-C ports. It defeated the best feature of the Thunderbolt display to me - a clean desktop. So like I say in the video, my goal was to get that back with my new Mac.
Did you lose any functionality after swapping out the OEM AIO TB cable for the replacement? I swapped my broken AIO cable for a 2M Apple TB2 cable like the first half of the video. But the display has now lost the ability to use the built in camera, speakers and USB ports. It's basically the same as running a TB cable from the rear daisychain port. Also it now only works with my much older TB1 era Macs and crashes my M1 iMac and an MSI TB1 motherboard. I'm considering sourcing an original AIO TB cable, but I'm apprehensive in dumping more money into the thing as it has such limited usability. I've also considered swapping out the logicboard from the earlier LED Cinema Display, as those boards are cheap and so many parts are interchangeable, but the AIO cables are nigh on impossible to find, or 2x the price of a fully working display. The other option and probably the one I will take, is to source a EDP driver board specific to the LG LCD display and use it as a basic external monitor
The "All-in-one" cable is really just a Thunderbolt 2 cable running next to power leads inside the same insulation. There is nothing special about the AIO cable. I have full functionality using the OEM Apple cable between my two TB2 monitors and then another connecting to a TB2 hub. Video, Mic, Speakers, USB 2.0, USB 3.0 (via hub), all work well, even using the back ports. I'd suggest getting the OEM AIO TB cable from Apple. Good luck and let me know what you find!
@@colindgrant I must have a bad logic board. It does some other weird things like totally freezing up the OS or even crashing the system when I tried it out on a Z77 MSI thunderbolt board and a newer M1 iMac. I can only get the basic functionality mentioned in my first comment when connected to a 2012 MBP and a 2013 iMac. My plan for the monitor is to either get a driver board for the LG panel and gut the insides. Or possibly ‘downgrade’ it to an LED Cinema display by swapping out the logic board and adapting the port holes at the back. All the other components seem to have been used on both models. The snag with that plan from what I was researching, was the unique AIO cable for that 27” LED Cinema, as it’s even rarer again than the thunderbolt one. It will be a while before I get back to it anyway.
@@BOLeary-u5b I would think the next step is to rule out the cable by using an Apple OEM cable. I had some pretty odd behavior when my AIO cable was worn out, and it was temporarily fixed by using an OEM TB cable direct from 2015 MBP to TB Display’s back port. Apologies if I missed something but it seems like those behaviors could be caused by a bad AIO/TB cable (with an internal short for instance).
Just picked up a second hand Thunderbolt display myself to attempt this mod. I have a few questions tho, why is the charging limited to 45W? I'm pretty sure that the display can deliver up to 85W, which means it shouldn't be supplying 16V but 18V right? The reason why I'm asking is that I'm going to try to add an OWC Thunderbolt Hub inside of the display, to add power delivery (which means only one cable). Most Thunderbolt Hubs are not bus powered, and mostly use 20V power supplies. PD on the hub can deliver up to 60W, which means I need a bit more than 45W right? How would I go about doing that, any tips?
Cool idea! I had the same question as you. The limitation is the voltage of the power supply inside the monitor. Once turned on, is right around 16V. It's possible that Apple Magsafe connectors pulled high enough current at 16V to supply 85W, not sure. But the power delivery module I used senses the 16V input and decides to shift to the nearest PD fixed-voltage output level which is 15V. My Macbook senses the charger is offering PD @ 15V, and I think it self-limits the current to 3 amps, netting 45W. I bet if you installed a boost converter to increase the supply voltage to say, 22V, the charge module would use PD @ 20V, and give you 60W charging. To be clear that setup would be: Thunderbolt Display Magsafe Power Supply -> Resistor+diode to turn it on > Boost converter (16V in, 20V+ out) -> Power delivery module -> USB-C cable offering PD @ 20V Let me know what you figure out!
@@colindgrant Thanks for the reply! I did some more reading and basically figured out what you just said. 15V indeed has a current limit which makes it usable for 45W only. I'm planning to get a boost converter to power the hub, and I'll keep you posted as soon as I have made any progress. Your resistor & diode setup is definitaly crucial for making this work, so thanks a lot!
@@colindgrant As promised, an update... I bought a few resistors, an OWC thunderbolt hub and the mentioned Schottky diode. I connected them to the Magsafe output of the PSU, and indeed got 16.5 volts, but even after the diode the voltage was fluctuating quite a lot? I connected a boost converter nontheless, but at that point the power supply started making a clicking noise which didn't sound very healthy, and the voltage dropped to 4 volts... I did some more reading on magsafe though, and apparently the PSU senses the current draw at 16.5v, and if it exceeds 4.1A the voltage will ramp up to 18.5 volts, or even higher. I've read that there might be contact points on the PSU that switch the voltage for calibration purposes at the factory. As I'm not too familiar with such complicated electronics I abandoned the project at that point to make sure I don't fry the power supply. I might dig back into it in the future, but my current setup works fine for me, except for the bulky PSU of the thunderbolt hub. I'm currently running the display into the hub using the thunderbolt 2 to 3 adapter, and running the output (with PD) into my macbook, so the goal of running one cable for thunderbolt & charging has been achieved. I dissasembled the OWC thunderbolt hub, and I can say with certainty it would indeed fit inside the chassis of the display. It would only need a way to run it of the existing magsafe PSU, but I don't have the knowledge/experience to figure that out. Thanks anyway!
@@dogfreak3000 Thanks for the followup! Great info here. That would be super cool if you could stash the TB hub inside the display and power it from the display as well. What input voltage does it need? Can you link me to the OWC hub you bought? Or to pictures of the internals? You ought to make a "What's inside?" type video just showing the internals, that would be super helpful! C'mon, do it ;) Anyway, I'm going to put that on the project list (but there is a long backlog right now!) Thanks again for following up.
Hi again@@dogfreak3000, I was re-reading your comment about how you read that "the PSU senses the current draw at 16.5v, and if it exceeds 4.1A the voltage will ramp up to 18.5 volts, or even higher". I would very much appreciate it if you could link me to any website that talks about that! Thanks!
All I want to do is figure out a way to use the firewire and thunderbolt ports to add a few more USB ports. Anyone have a simple solution like a chord that plugs into the firewire or thunderbolt ports and creates a dock?
any problems (flickering display) before changing the cable? read that the flickering is because of thunderbolt cable. my thunderbolt is hot when removed from mac mini/ macbook.
I used to have a problem where the TB2 cable end was hot, and the video would suddenly drop out. It required a combo of power cycling the monitor and replugging the cable to get it working again. Replacing the cable fixed it. You can use the port on the back of the TB display as an input if you don't want to replace the built-in cable.
@@colindgrant i think i'll replace the cable, to clean the inside, to check cooler and whatever. i got my display for free and i love it. for the moment it's ok to spend the money on a cable :)
Very nice modification. I am surprised Apple just installed a thunderbolt port on the logic board. But hey it’s great for modifications! Thanks for sharing
So you think it’s possible to connect the buck converter assembly directly to the two pins inside the supply connector? So that you don’t have to break the original cable assembly housing the power cord and Thunderbolt cable.
@@nivt5262 You've got to fool the power supply inside the monitor into thinking it's connected to a Macbook. That's why you need the specific resistor. And the diode avoids weird interactions from connecting the two switching power supplies connected together: the power supply in the monitor, and the buck converter.
In case I misunderstood your question, you could wire the buck converter into the power supply wires without reusing using the black plastic two pin connector. Nothing special about that connector. My cable assembly was already flaky so I didn’t feel bad about cutting it up!
Is there any way to connect three thunderbolt displays to an M1 macbook pro? My current understanding and testing is that apple purposefully limits it to two external displays. And the only way I know how to make it work is the M1 MAX/ULTRA chips which allow 3.
Yeah essentially you chose how many external displays you needed when you bought the Macbook. It's a System on Chip architecture, so the video controllers are built right into the same chip as the CPU and RAM, etc. Apple doesn't limit anything, it's just that an M1 PRO chip has capability for 2 external video channels. The M1 MAX chip has more video controllers built into it. I have the M1 PRO so I used a DisplayLink adapter for the 3rd monitor. It runs off of USB. Far lower bandwidth, but the display performance is plenty fast for typical applications.
Thank you for the response! I ended up with an M1 Max laptop with three beautiful apple thunderbolt displays in sort of a T shape. It has been amazing. But my one of the thunderbolt cables was getting wonky and I kept having to set the cord at different angles for it to work. Finally just got an apple thunderbolt 2 cable and used this video to install. (no need for the power). Thank you for taking the time to put this content out there!@@colindgrant
can we simply connect 16.5V adaptor to power on the display - I just want another display ( not wanna use USB -C to charge my laptop as well? @colin grant can you help?
If I understand this correctly, you can just connect the Thunderbolt cable with the usb C adapter. - failing that the display itself can work with a Thunderbolt 2 and adapter plugged into the rear port. - it’s a fix I have used a couple of times when the displays cables are knackered.
The Thunderbolt Display is powered by A/C from the wall, and there's a power supply internally. This video doesn't cover any alternate methods for powering the display. It covers how to power your laptop off of the display (using USB-C).
Amazing work here mate! I think I have a similar problem to others, but I cannot get my MacBook Pro M1 Pro 14 “ to work with the TB display via the TB2 to TB3 adaptor. For whatever reason, it just won’t fire up the TB display. Any advice would be greatly appreciated.
Thanks for the compliment! As for your issue I would try to verify operation on an older laptop with Thunderbolt 2. Make sure it's turning on as expected, and let it run for at least 24 hours, through a sleep cycle, and make sure it wakes up without issue. Lots of people have trouble with these monitors just due to the cable, or something wrong inside the monitor itself. I would just double-check all of that before suspecting anything to do with the TB2 to TB3 adapter or the M1 laptop. Maybe you've already done that. Another thing to keep in mind is that the various M1 laptops have different limitations on the external displays that can be connected. So another test is to connect a non-Thunderbolt display to your M1 laptop and see if it works. Hopefully one of those paths helps you find the root cause.
Is it definitely a Thunderbolt Display or is it the LED Cinema Display? The latter has a Display Port interface and would require and adapter to connect via HDMI port on the Mac.
I have a project that you might be able to help me with. I own an early 2015 MacBook Pro A1502. The MacBook has 2 x Type A, USB 3.0 sockets and a Thunderbolt 2 socket. I wish to run a NVME M.2 SSD in an external enclosure. It seems that the Thunderbolt 2 has the best data rate. But trying to find a type 2 Thunderbolt NVME SSD enclosure has proved impossible. What has been suggested it that I use the Mac Thunderbolt 2 to USB C (technically Thunderbolt ?) adapter and get a type C enclosure …. but this won’t work either because no power is sent to the enclosure via this cable setup. I could find power by using one of the USB Type a connectors on the MacBook and make some sort of cross over cable. But maybe the type C connector on the enclosure will limit the data rate and cause voltage selection issues? How would you set about this project?
Yep. Thunderbolt 2 was primarily a data transport, using Mini DisplayPort connectors. It only carried a small amount of power (15W?) and was not designed to power devices. Thunderbolt 3/4 combines the data transport with USB Power Delivery (PD), using USB-C connectors. So you get a lot more power! As you pointed out, the Apple TB2 to TB3+ adapter only converts the data transport, it does not inject any power. And your MBP USB-A ports only provide about 5W. I had the same 2015 MBP, it just plain does not supply any significant power to peripherals. So you really need to come up with a solution that lets you supply external power. Here are a few options I can think of: Option 1) TB2 enclosures have external power input. Keep looking for a used TB2 enclosure, perhaps on eBay (I found a LaCie on Craigslist, I'm open to selling it). Option 2) Use a TB3+ dock. CalDigit is one manufacturer. You should be able to connect your TB2 equipped computer to a TB3 enclosure like this: Wall Power DC -> dock MBP TB2 -> TB2 to TB3 adapter -> dock TB3+ enclosure -> dock The dock may power your enclosure Option 3) Look for a TB2 dock the breaks out USB 3.1, and use a USB3.1 enclosure, with external power provided to each. Option 4) Probably the easiest option is to use a USB3.0 enclosure connected straight to your MBP, with external power. This eliminates the need for a TB2->TB3 adapter or a dock. The top speed is lower, but still really fast! Speeds (theoretical): USB3.0 5Gbit/s USB3.1 10Gbit/s TB2 20Gbit/s TB3+ 40Gbit/s (max)
i want to use it on imac as second monitor? can you guide me how? my TB display power cable is not working it flickers the display so i am thinking to do this modification and power up TB display again? any thoughts on this?
Sounds like you just need a new cable, you don't need anything in this video. Apple publishes articles about how to use an iMac as a display. I've never done it.
Really cool solution and I was able to take this on myself thanks to your great video! I am having one issue. The PD module seems to work just fine with my MBP M1 2021, charging at 45W. However when I use with a similar vintage MB Air, the charging is intermittent. This is indicated through the connection chime and the battery icon. Any ideas what might be going on? I did try different USB C cables and was able to replicate the issue with a variety of cables.
Ahh, sorry to hear that! I hoped it would be a universal solution for Macs with USB-C charging. I will think on it but I don't have any ideas off the top of my head.
Amazing video. What if I was lazy and wanted an external dock that took in Thunderbolt 2/Mini-Display port and USB-C power and outputted it all to a single USB-C cable. Does that exist?
I’m still running an older MacBook Pro and need to adapt this to an HDMI VIDEO station with a new USB C laptop using a KVM switch. Video is my issue. Can I swap the video cable like you did, but terminate it in HDMI from USB C?
I'll probably get some specifics wrong here, but let me try and answer off the top of my head... It gets really confusing because the names of connectors and transport standards are used interchangeably. USB-C is a connector, used for newer transports like USB 3 and 4, and Thunderbolt 3 and 4. But it is backwards compatible with the older versions too. DisplayPort is a connector that originally carried signals very similar to HDMI. It already existed when it was chosen as the connector for Thunderbolt 1 and 2 transports. HDMI is a transport AND a connector for digital audio and video and maybe some security stuff. And it is backwards compatible with DVI, which is video only. The Thunderbolt display is not an HDMI device. It connects to a Thunderbolt capable computer and makes use of the full Thunderbolt transport standard. Video and audio and ethernet and USB data are some of the 'cars' on the Thunderbolt 'ferry', if you will. Yes, HDMI is a car that can drive on its own, between your DVD player and TV for instance, but it can't get on a ferry unless there is a terminal on either end. My conversion still connects through the Thunderbolt transport. It's just that the adapter from Apple, stuffed inside the display, does two things: 1) it converts the Thunderbolt transport version from TB2 (display) to TB3 (computer), and 2) it coverts the connector from DisplayPort to USB-C. From your question I can't tell if you are using a Thunderbolt Display at all. If you are, then you can't get around the fact that it must be connected to a Thunderbolt computer, regardless of the connector. But Thunderbolt displays, and Thunderbolt computers can *output* video to non-Thunderbolt devices. Your older Macbook probably has a Thunderbolt 2 port, using the DisplayPort connector. And you can get a dongle to convert DisplayPort to HDMI. But it's just an output. If you're trying to connect two computers to a KVM switch, and you just need to output video from your older MacBook to an HDMI input port on the KVM, then you should be good with an adapter dongle. But my older 2015 MBP also had a HDMI port, so I would just use that.
Just tried to hook up this monitor to a regular computer via a mini dp cable...without luck...same with the original cable (which I think might have been damaged)...any other solutions? When plugged into the power the display shows usb power output in the back....so something is off with the video display board, or some other issue...any ideas? what to test out? thanks.
@@derekp9737 It's a Thunderbolt display, you have to connect it to a Thunderbolt port, whether Mac or PC. Thunderbolt is more common on Mac, but many PCs have it too.
@@derekp9737 Can't be done. Thunderbolt displays only work with Thunderbolt capable ports, period. Thunderbolt requires an actual chipset made by Intel. Think of it as adding a card into a tower PC. It's not an adapter type of thing.
Thanks. I have limited IT knowledge. The thunderbolt 2 cable on our unit has failed. Would your idea work with only replacing the video cable and disconnecting (not using) the charging function?
If you don't need the charging function, you can just buy a Thunderbolt 2 cable and plug it into the port on the back of the monitor. That port is bi-directional.
I have been trying to connect my Thunderbolt 27" Display to both of my Macbooks Pro 16" 2019 and 2016 without any luck using the Thunderbolt 3 (USB-C) - Thunderbolt 2 adapter. The monitor works fine with my old Macbook Pro with the Thunderbolt 2 inputs, I watch many videos and it works for some but not for everyone. ANy clues? thanks
@@colindgrant Thx for the reply Colin. I talked to a Mac repair shop and they told me to buy a dock station with the power supply ... those Macbook Pros' Thunderbolt 3 connectors supposedly can't power Thunderbolt 2 devices :( and they are difficult to find now so I just need to buy me a new monitor ... thx for your video though
Hi, nice video! if i would like to do the same, would i be able to connect my original usb-c to magsafe instead for charging ? that would free up one usb-c port and it would look even more authentic.. only problem i have is that converter and that resister and so on, not sure i can pull that of.. but Damm that would be a killer mod, instead of that dongle hell im running now
The USB-C to Magsafe 3 cable works in other USB-C power supplies. So it should work in the USB-C power delivery module I show in this video. But you will still have to do the modifications I showed to get the Thunderbolt Display to supply power to the module. Good luck getting out of dongle hell!
Yeah, true. I started out that way but the beauty of the TB display to me was two lightweight straight flexible cables that moved with the laptop and were never in the way. The adapters I had were different sizes from each other, and magsafe is a 90 degree connection, so there was always some connector being tugged on. Plus the magsafe adapter I had go pretty hot. I made this video for anyone who wants to return to just having two direct cables like the original design. That works best for me, and it was fun too :)
@@gefthetalkingmongoose You and me both! I know there are Thunderbolt 4 hubs out now that will provide up to 100W charge and full TB4 speed over one USB-C cable. But I don't know how they inject power into the TB cable. They are pretty expensive, but I think if I used one I would ignore the power supply in the TB display, just run TB2 down to the hub, somewhere out of the way, and use Apple's TB2TB3 adapter at the hub. Then just the one cable from the hub to computer. That could be a slick setup. I read that regular TB intended for data only still carries a small amount of power (somewhere around 10W to 15W). So I'm pretty curious how TB and 100W Power Delivery charging is combined. My sense is that it's probably complicated, and bad for your laptop if you get it wrong :)
Thank you for your video! I‘m running my MBP 2018 with the Thunderbolt Display charging via MagSafe to USB-C adapter. Unfortunately these adapters are quite unreliable and become really hot during use. So this is a genius solution for USB-C MacBooks!
@@nivt5262 Yeah I tried one out and I had the exact same experience! It was an awkward angle and length, so it was always tugging on the laptop port too.
It's a VIVO STAND-V102H dual monitor arm. The same model is sold by a few manufacturers under different model numbers. It's decent but dual 27" screens is pushing it on any of the common arms out there. I've tried 6-8 different models and I like this one the best because it keeps the screens in the same orientation relative to each other. www.amazon.com/gp/product/B08LM68CSP
@@colindgrant thank you! Yes I actually found it after I posted my comment (after lots of searching). I bought and installed it a few weeks ago. My dual 27 Thunderbolt monitors seem too heavy still, I probably need to tighten everything again. It's definitely not as smooth as yours.
@@themichaelholdren mine is not as stiff as I would like it to be. I did a lot of little adjustments On just about each screw. And I used a metal reinforcement plate on my desk so that at least the base of the V102H was solid. The way they designed it the displays are just cantilevered out too far away from the top hinge on the arm. It's strong enough to lift them, just not stiff enough to resist twisting and wobbling. Still, the best of the ones I evaluated!
Can I do this without adding a power supply to charge my MacBook Air M2 ? (Just leave the socket empty without fear of a problem ?) I can't weld because I don't have any equipment and experience.
I don’t know if you’ll read my message but what are are you using for the two thunderbolt monitors. They are heavy and I can’t find an arm with the weight rating.
Hi Morgan I answered that a few other places in the comments. It's a VIVO, I don't have the model info handy but if you look around here you should see some discussion of it.
What about taking a new MagSafe 3 to USB-C from Apple and hacking the USB-C side and soldering it to the inside of the Thunderbolt Display. It's already 85 watts. You get to use MagSafe 3, you get back a USB-C/Thunderbolt port on your MBP. I just got a 16" MBP M1 Pro, bought a MagSafe 1/2 adapter to USB-C, I only get 45 watts, plenty to keep the MBP charged since it sips power, but I would prefer to use MagSafe and get back a port.
There are a couple things that make that difficult: 1) Cost; go check out what Apple wants for Magsafe 3 cables and chargers! 2) The MS3 cable itself is USB-C based, but it needs USB-C Power Delivery negotiation so hacking off and directly soldering isn't an option. 3) The TB Display only has so much power available. I've read 'up to 85W', but it's a 16V system, so that would be over 5A and I don't think it can actually supply that much. But what you could do is install the USB-C PD module I showed, and simply plug a Magsafe3 cable into the USB-C port. You're right, that would give one of your USB-C/TB ports back. At the time I did this the MS3 cables were in short supply, and only available from Apple. I haven't checked recently. But at the time I wanted to keep mine for travel.
@@colindgrant thank you for the reply. When I get a chance, I'm gonna do this retrofit. I wish someone would make a plug n play solution, but I do know how to solder. Just gonna have to get around to it eventually.
Bro with all the M class macbooks out and people trying to get rid of their thunderbolt displays why not make a kit fopr people to replace. I sure would buy it!!
Can anyone recommend a MagSafe 1 to usb-c adaptor I can use for this? If I don’t have to open the display I’d prefer not to, the only problem is that I’ve yet to find an in-stock MagSafe to usb-c adaptor.
The one I tried was horrible. It got too hot to touch, the light didn't work correctly, the 90 degree interface was awkward, and it disconnected too easily. Basically it was awful enough that I made this video! I've read the same from other commenters. I bought mine on eBay, and I haven't seen any better ones. Sorry to be the bearer of bad news.
Hey Colin My Thunderbolt display sometimes flickers which is annoying so today I received a Thunderbolt 2 to USB C cable from amazon, I opened the display and removed the old thunderbolt cable that has a magsafe cable attached to it and fitted the amazon cable, but that didn't work, do you know why? I believe the flickering is caused by the cable therefore was planning on just swapping to a new cable, i use a Macbook pro 2018 so i do not need the magsafe or the thunderbolt 2 connection, i thought I can just switch it over with a conversion cable, maybe if I swap it with a thunderbolt 2 to thunderbolt 2 cable and use the adapt it would work that way? Any recommendations would be greatly appreciated
You're probably right about the flickering being caused by the cable. That's something I experienced and many others report. I'd be very skeptical of that so called "Thunderbolt 2 to USB-C" cable you received. I've never heard of one, and I doubt it exists. The reason is that the conversion requires active electronics, not just pin reassignments. I would be very surprised if anyone was manufacturing an active conversion cable for this purpose. I suspect you have a USB-C to Mini-Displayport cable. That works because the USB-C port on your Mac can fall back from Thunderbolt to Mini-Displayport. I'm almost positive that to go from Thunderbolt 2 to USB-C, you'll have to do what I did - use a Thunderbolt 2 cable and the Apple Thunderbolt 2 to 3 converter. I think that is the only option. Good luck!
@@vietkhoamax I solved my issue by opening the display and cleaning the whole unit, removing the thunderbolt cable and cleaning the connections, reinstalled everything back together and not had an issue since.
Yes, they are powered separately by the A/C wall plug, so this modification does not affect those ports. Keep in mind each port supplies less than 1A, more like 500mA.
I just purchase a Mac mini m1 and I quickly found out it was not going to work with my 27” Thunderbolt Display does anyone know what adapter I will need to make this work
Hi, thanks for the video. My thunderbolt 3 (USB-C) to thunderbolt 2 adapters have been broken twice in the last two months. Apple still replaced the adapter but is there any possibility that my Cinema display cable is overcharging/affecting the adapter? When I connect the old MacBook with Thunderbolt 2 to my apple cinema display, it works perfectly because there is no adapter. Thank you so much
I used the first adapter about 6 months before it is broken. Apple tested it and replaced a new one for me. The second adapter only worked for 1 day and then it is broken, with the same problems ( black screen, flickering, etc. ).
That is strange, especially because the Thunderbolt 2 connector by itself works fine with the older Mac. As a troubleshooting step I would try using the adapter with a TB2-TB2 cable plugged into the socket on the back of the monitor.
@@colindgrant Hey bud, are you saying that if someone is having issues with the original TB2 cable that is coming out of the display (flickering, etc..), then you can use a new TB2 to TB2 cable, plug it into the back, and that will also feed the video? I just purchased a TBD and a new MacBook Air, and the screen is great but every once in a while, or sometimes more frequently, it turns on and off.... bad cord? Thanks in advance.
@@colindgrant My man, thanks so much for getting back to me. I may tackle the video project eventually, but just for the TB2 cord, and not the power delivery side of it. I truly appreciate your time, your video, and your response. Cheers mate!
I tried to get my Thunderbolt Display to work with a Windows laptop during lockdown without any luck. If you manage to do this please let us know. I tried a variety of drivers from Intel but while it could see and recognise the Thunderbolt interface, I could not get the display to come on.
It's a Vivo dual monitor arm. The same model is sold by a few manufacturers under different model numbers. It's decent but dual 27" screens is pushing it on any of the common arms out there. I've tried 6-8 different models and I like this one the best because it keeps the screens in the same orientation relative to each other. www.amazon.com/gp/product/B08LM68CSP
Thanks for pointing that out! I'll add it. Yes, you must have the resistor in order to get the Magsafe power supply in the monitor to supply full voltage.
great video, now do you think you could create a switch to use our thunderbolts with two computers?? I've been looking everywhere and it doesn't exist. without having to constantly plug and unplug our Macs. It's the same for the new studio and xdr pros.. all kvm switches are hdmi, display port, but NONE work with this thunderbolt 2 or 3. I can't be the only one who wants this! You seem capable of such a thing!! liked and subbed by the way!
Hi@@sean.sullivan, sorry I missed your comment. The extension cable is linked in the description. As far as a KVM, I'm guessing the reason you're not finding them is that KVMs usually switch a pure video signal (well, in addition to keyboard and mouse). But Thunderbolt is a general data transport standard. It's kind of like a ferry, and video/audio/USB/ethernet are the cars that can ride on the ferry. They can drive point to point on their own, but in order to ride the Thunderbolt ferry, you have to have a ferry terminal at either end. So in order to have a KVM that acted like a ferry terminal for Thunderbolt, it would need extra chips and licensing, and that would drive up cost. I don't know of a way to connect two Thunderbolt video sources (computers) to a single Thunderbolt display. The nearest thing I can think of is to us a non-Thunderbolt HDMI display, and use Thunderbolt to HDMI dongles on each computer's output. I know that's not what you're hoping to hear!
Thank you for the video - as I have few Thunderbolt displays in hands. I have tried to use the MagSafe for older MacBook Pro and MacBook Air. I have grown to DISLIKE the power cable portion - it created the tension on the most precious Thunderbolt 2 connector, which I saw on many Thunderbolt Display. I have disconnected the Octopus cable's internal power connector, then cut off the external power cable. However, aesthetically, it looked ugly with the TB2-> TB3 adapter, plus the thickness of the the remaining cable. I really like your method of hiding the adapter internally and only has TB3 cable coming out. During my modification, I cut the 0.5m TB2 cable's plastic cover and it shows the "connector" exactly the length and style like the OEM's Octopus internal TB2 connector! So, I can use the connector's cover, without needing the glue! I also save Octopus cable's the white center "button" for the TB3 cable to pass through (again, with cutting and gluing) - now it feels like the TB3 cable was part of the TB Display... It suits perfectly for my M1/M2 Mac Minis. Thanks again for inspiring me to make this modification!
That’s so slick, nice work!!!
Nicely done! I just replaced mine and reeeally wanted to cut into the plastic cover on the end of the thunderbolt cable to see if it was long enough to fit. I was too scared since it was the only one I had on hand. I installed it without glue or anything but this is amazing. I will go back and install it "properly" once i get another cable on hand.
@@TheGrizzlyKnight It IS long enough, and fits perfectly! I've got video of the mod, I just need to edit and post it. I used a small cuttoff wheel to make two lengthwise cuts down the white plastic shell and popped it off. It appears to be the exact same connector as the one you find inside the display.
@tenorcello any chance you can do a write up / video / or even just some photos?
@@kickwriteteach2313 It's on my list!
love how far your curiosity took you.
Awesome work. It’s funny that I only came here for adapter info, yet watched the entire video because geek stuff. Looked like a fun project!
Beautiful clean setup! Kudos Colin for converting the Display.
Thank you very much
Colin...
Thank You!
A) I have 2 Thunderbolt Displays in front of me right now. (and 1 in storage with a bad tb cable!)
B) I loved these things when I walked out of the Apple Store a decade ago with the 2 giant suitcases they come in. Specifically for the use case that you are resurrecting: a single ultra-clean umbilical cable across my desk to my MacBook Pro. The monitor itself was a dock with all of my peripherals attached. The minimalism was unprecedented, and you've made a way to bring that forward to 2023. So thank you.
C) This opens up a Bunch of other options as well for other use cases that fellow owners may have, such as:
1- Just unplug both the TB and the Power, remove the umbilical, and that's it.....get rid of that annoying ass cable that I loved in the beginning but has been driving me crazy ever since. First of all you don't actually need it because you can send TB into the other port on the back of the monitor anyways. Unless you actually need to daisy-chain thunderbolt, which I do, so...
2- Remove the umbilical, leave the power disconnected, and Just add a new TB2 cable At Whatever Length You Actually Need!!! If you're not using a MagSafe laptop, that thing is just dangling around (with gaff tape on mine) not connected anyways, and I'm guessing not using the MagSafe power will extend the life of your display's power supply as well. Plus that cable was Always too short if you were say hooking these Thousand Dollar monitors to anything Other than a laptop on your desk. Say a Mac Pro tower....loaded with hard disks...and all the fans and heat, at my feet! (Where were you 10 years ago Colin!)
3- I'm guessing that Most people would benefit most from rather than doing that impressive power PD supply hack on the inside of the display, or even putting the TB3 to TB2 adapter on the inside, simply follow your umbilical removal technique, drop the power all together and replace with a New TB2 (at chosen length), which looks like it'll hot-glue down even cleaner. Then use that TB3 to TB2 adapter at the End of the new TB2 cable going into your TB3/4 Dock of choice, which can solve many other issues. You can Hide it and everything else you need plugged into it, and maybe bypass the dock built into the TB Display. And you can Hide it. So on the clean theme, while this display impressively minimized down to one cable and two connections, these new docks can supply TB Data, Displayport Video, and 100+ Watts Power all down a Single TB3/4 cable. Can't get any more minimal than One!
(well wireless is coming...)
4- (Disclaimer: I read through the comments so I know you already addressed what other pointed out, and I agree with you on the price and length of these apple cables, but for anyone else...)
If money was no object and you wanted the cleanest "Apple did it in 2023" upgrade, then you follow the video and remove the old umbilical, then install Colin's PD USB-C power mod ($?), then install the Apple TB3-TB2 adapter ($50) as described, and then... you install the 2-meter, midnight color, Apple USB-C to MagSafe 3 cable ($50) and a 1.8-meter Apple Thunderbolt 4 Pro cable in black ($130). Add some snakeskin cable wrap and some heat-shrink tubing and for a couple hundred bucks you have a new Apple Umbilical that does exactly what the old one did.
(Now while that MagSafe cable is 50 bucks and I don't know an alternative, I'm sure you can find a matching aftermarket TB3 cable for Much Less than the Apple Pro one. And you could get both in silver closer to the OG theme. But whether you Spend less than a hundred or close too three, that money doesn't buy you extra functions, where just buying a TB2 cable and investing the rest in a TB3/4 Dock actually results in a cleaner setup, better Power Delivery, and additional functionality, while retaining All the original functionality.)
5- I'll be cracking mine open soon. But since you've shown us mere mortals the way, I wonder your thoughts on the other Elephant sized Apple in the room.... getting these Thunderbolt Displays to accept DisplayPort video information!
For years I have regretted getting these Apple Thunderbolt Displays because at the time I also had two Apple Cinema Displays that were much less expensive and nearly identical, except... The TBDs had TB2 Docks built in, which as we discussed was amazing, for a while. Using the built in docks meant running all of the cables Up to the Monitor, which as much cable management as I did was always hideous. And I could just get a standalone TB Dock, and Hide it, which ultimately you had to do anyways if you need your computer more than a couple of feet away. Daisy-chaining a dock extends your range, and can tuck the rats-nest away neatly underneath or behind something. The built in was only used for USB sticks, iLok, BT dongles etc. No cables.
So then the TBDs advantage went away over the ACDs, and the disadvantages became obnoxious. The identical looking miniDisplayPort connectors on the Cinema Displays could easily be converted to DVI and even HDMI. Not the Thunderbolt Displays. Even though Thunderbolt is just the PCI protocol and DisplayPort protocol on one cable using miniDisplayPort connectors. You can't get to the DisplayPort signal without TB Magic. At least that was the conclusion of many of us in the pissed off owners circle, back then...
Do you know of any advancements in the past X years that allow us to use this monitor simply as a Monitor?
As I just bought a 55-inch OLED with Dolby Vision for $350 bucks this last Black Friday, my anxiety levels have definitely diminished along with my dreams. But I do like the thought of sleighing this dragon once and for all!
But at least you've shown me how to lop off a few of these Hydras' heads, even if I can't ultimately make them bow to my authority!
Glad to be of help!
To your last point, you've basically got it right: the Thunderbolt 2 connector is the same as a DisplayPort connector. And the unmodified Thunderbolt Display requires a Thunderbolt port, it will not run off of simple DisplayPort.
Meanwhile the TB2 port on a Mac will function as TB2 or DisplayPort automatically.
I spent many many hours researching this and finally got to the bottom of how video is unloaded from Thunderbolt. From memory...
Thunderbolt is a Ferry. DisplayPort is a car, as are USB, Ethernet, Firewire, Audio, iSight Camera, etc. They can drive on their own, or they can be carried on a Ferry. But a Ferry needs a special terminal, it can't go straight to a driveway!
The Thunderbolt Display and your Mac have Intel's Thunderbolt chipset onboard, as do all Thunderbolt devices. This chipset loads 'Cars' on and off of the 'Ferry'.
The unloading action on the Thunderbolt Cinema Display breaks out audio/USB/Ethernet 'Cars' to the ports on the back, and sends *one* video 'Car' to the LCD panel. Each Intel chipset is capable of unloading *only a single* video type 'Car'. It cannot break out video to go to the LCD panel and also send video in the DisplayPort format to the port on the back.
Remaining 'Cars' still on the 'Ferry' are sent out the back port onward to other Thunderbolt devices.
A second, third, or fourth Thunderbolt Cinema Display does the same thing.
So to get a DisplayPort signal out of a Thunderbolt signal what you need is a Thunderbolt device with two ports, and no built in video device! That way, the Intel Thunderbolt chipset inside, can unload the video and place it on the output.
In my previous setup I used a Belkin TB2 hub to accomplish this. I was able to run a DisplayPort monitor off of the Belkin hub's extra TB2 port. This can be done once, at the end of the daisy chain.
My setup was:
Macbook Pro 2015 ->
TB2/Magsafe umbilical cable ->
Thunderbolt Cinema Display ->
TB2 cable ->
Belkin TB2 Hub ->
DisplayPort to DVI adapter cable ->
DVI based Dell monitor
So I had a TBCD and DP based display both running off of the single TB2 port on my Mac, no extra cables. It was nice for its time!
@@colindgrant Great analogy, I have been tinkering trying to get 2 x TB displays to work on the Mini M1but it its not possible. I suspect apple may have blocked it in the software driver but not 100% sure
@@symosys Each Mac has a given number of displays it can support, based on hardware resources.
In the old days you had an individual video card for every display, and while the hardware has changed the resource constraints still exist.
So while Thunderbolt may have enough bandwidth for many displays, the Mac still fundamentally has to have enough hardware resources to support each additional screen.
My 2021 MBP 16" M1 shown in the video can support the built in screen, and my two external monitors using built in display-dedicated hardware. To drive the third screen I use a DisplayLink adapter, which borrows from the USB-dedicated hardware.
You may be able to use DisplayLink to add another display. Good luck!
This is a great setup. I have a thunderbolt display and the new macbook with magsafe 3 and I wanted to use the magsafe 1 from the display. However, after watching this video I have decided it's too much hassle for me. But your tutorial is awesome anyway!
Excellent video - thanks! I too have an "intermittent" display cable and need to replace it and so will use your method. Here are two rather naïve questions. First, since I never use the MagSafe power cord anyway (I easily charge my MacBook Pro with its own charger) I'll just skip that part entirely, and replace the video cable only. So question 1 is - is there anything wrong with that plan? Question 2 is why did you need to do all the voltage conversion in the first place? Are the voltage needs of the new MacBook so different? Why isn't it just a connector change, like for the video? Lastly, I am not sure how to take the existing Magsafe power cord out of the picture - just unplug within the display, or tie it unused on the outside, unused, to the new 3/4 extension cable. OK - now to go out and buy some suction cop and T6 and T10 torx heads. What was the T number for the display frame, BTW? Thanks!
I’ll go in reverse! I don’t remember the tire size for the frame but a small set is worthwhile, in the T5-20 range. If you want to do the internal usb-c conversion you can just leave out the steps I did for the voltage conversion entirely. Remove the umbilical cable and just stuff the TB2 to TB3 converter inside like I did. The voltage conversion was to change from MagSafe 2 to MagSafe 3 which is really just Power Delivery over USB-C, a part of the USB spec. The monitor won’t care that you’re not pulling power from it. Good luck!
@@colindgrant Ah, I see, thanks. The great paradigm changing innovation of having anything: data, input power, output power - anything but analog sound, come over a single cable type must have had _some_ overhead in specs.
@@stevenlord7793 Sorry not following on the "overhead in specs"
I was philosophically referring to the new specs being required of the entire industry to accommodate the upgrade to USB-c, but yes, they were required here too. (I just want to repeat that your walkthrough was super clear!)
@@stevenlord7793 yeah totally. Thunderbolt 3/4 especially has lots of new functions going over USB-C!
Thank you I was able to follow up on this instruction and finished the mod. I used the original grommet and let the thunderbolt 3 to 4 adaptor's usb-c connector out of the monitor just in case I have to replace the extension cable.
That's great to hear! Nice work.
i imagine it would be pretty cool if you had the second wire as a USB C to magsafe to supply power, just as it originally was. Really cool project!
Thanks! You’re right. I’m keeping the USB-C to Magsafe 3 cable that came with the MacBook for travel but it would totally work instead of the USB-C to USB-C cable I used for power.
@@colindgrant you could also utilize the thunderbolt extension chord you bought in combination with a usb-c multi port adapter which allows powerdelivery pass-through. This way you can get both power and data through one usb-c (thunderbolt) cable. At home I just connect one thunderbolt cable to my setup for both charging, display and peripherals.
@@atacant Link?
@@colindgrant I live in turkey so it might not be applicable for you but it is a dock from Baseus, it looks like an O.
@@atacant Thanks. I've seen those but not one that supports Thunderbolt. I think "video over USB-C" is a different transport protocol than "video over Thunderbolt", even if Thunderbolt is using a USB-C type connector.
The Mac probably supports both, but I'm pretty sure these monitors are specifically looking for "video over Thunderbolt".
Hi, I have mostly completed this mod to my Apple 27" Display. Power delivery works a treat. It's been faultless.
I am having troubles with the Thunderbolt > TB 3/4 cable placement inside the screen. When I then install the converter inside the screen, the USB2, FaceTime camera and Display Speakers drop off after about 10/15mins. I have tried multiple locations in the screen, but every time it plays up.
My first point of call was the TB3/4 extension and purchased a different type but had the same result.
To confirm my cables are good and working for long durations without fault, I moved the converter externally with just the short Apple Thunderbolt cable running out of the screen with the Apple TB > TB3/4 converter outside the screen. This then works perfectly and can't fault it. I then move it back inside the screen taking careful note of the USBC orientation, and it faults again...
Placement of converter: mimic'd colin's placement from the video, tried further to the right above the speaker, and also to the left between the boar and the apple logo.
I am in Australia, so we are 240v power here - wondering if I'm getting some sort of interference compared to 110v displays
Could this be caused by heat issues from the main board?
Has anyone experienced these kinds of issues with the conversion? Any input is very much welcome.
Cheers
Really good detail here. I'm not sure what could cause this, but it seems like you've gone through the right steps to diagnose it. I kind of doubt 240V is the culprit - the display should be using the same total watts right? Lower amperage in fact, so potentially less heat. If I think of something, I'll comment back, but nothing comes to mind right now...
@@colindgrant Further update: wrapped the converter and connectors in aluminium tape to try and eliminate any interference issues (and yes too into account conductivity and covered potential areas with kapton tape). This brought on the issue ALOT quicker and completely killed the video signal after 10mins or so. This has lead me to it being a heat issue. I have since moved the convert further up and ontop of the apple logo give it far more air circulation, but am still having the extra functions drop off after 15mins or so (Display Audio, FaceTime Camera etc). Further playing around to be done.
Out of interest, I have order a couple of different DP to USBC (TB2 > TB3) cables from Aliexpress to see what this does - will report back when it arrives. Don't have high hopes for these...
@@Johno_H That's so strange! The fans don't even come on in my monitors, and yet I don't seem to have an issue like yours.
The DP to USB-C adapters you are seeing may be video-only. Those are the physical connectors but you'll need Thunderbolt 3/4 transport over the connectors, and to my knowledge only the Apple adapter does that.
Nonetheless, please do report back!
Saw this video today, i had a similar idea for my thunderbolt display, but more like plugable one not the cable coming out of the display. for which i even bougth 40gbps coupler which didn't work coupling, so the project got stalled. i dont want a again a cable coming out of it, i want a thunderbolt female port, which is not there anywhere.
Very nice. The only video out there retrofitting these beautiful displays. I wish you spent more time in showing us a step by step in putting together the finished charge module. Everything else had an in-depth instruction except putting the 39.4 resistor , shottky barrier diode and voltage conversion module together. How was that resistor connected? Did you use only 2 pins in the shottky diode connections? which one did you cutoff?
Yes, I could have shown more of that assembly, but it's just the same thing that I did on the breadboard. The resistor goes across positive and negative. I showed that at 10:27. And yes I only used two pins from the schottky barrier rectifier (because that's the 'diode' that I had laying around). You just need a single anode and single cathode, and I discuss that around 12:30.
Great video and awesome mod to keep this tech modern.
Similar question, maybe redundant but the barrier it connected through the positive wire connection right?after the resistor?
Just want to clarify as I want to do this mod myself but I’m not as well versed in electrical wiring.
Really cool video! Absolutely love the thunderbolt display, especially with the fact they have built in speakers and a webcam. Do they still work after the conversion? Too bad they don't make them anymore and are incompatible with the newer MacBooks. Only thing that would make it better if you somehow converted to a single USB C cable for both display and power. Cool project none the less!
Everything works, including ethernet and all ports. I use the camera and audio daily. I did convert to a single cable for everything using an Anker TB3 hub.
I have a question, I have a Mac mini m1 and would like to do such a cable upgrade for the Apple Thanderbold Display. Would it be enough to just install a USB-C cable on the Apple Thanderbold display? The MagSafe cable is irrelevant to me. Thank you in advance for your effort!...👋🏻
Sure. The power and data cables are completely independent.
@@colindgrant Thank you for the fast feedback! Then I will swap the original cable for a Thunderbolt cable.
And again, thank you for the information…👍🏻
Hello Colin. I’ve attempted your mod with a MagSafe 2 to usb dongle from elecjet. However I’ve noticed it gets extremely hot and clicks without it being connected to the MacBook. I was wondering if you’d had any issues with your buck converter being constantly pulling current/getting hot without anything connected. I’m very much considering swapping out my current setup for the pd side of things with what you’ve demonstrated, potentially adhearing the bc to the case with some adhesive thermal pads to act as a big cooler
I tried one of those MagSafe adapter dongles before all of this and I too found it got extremely hot! That’s one of the reasons I pursued this project. Good news is that the PD power module doesn’t get hot at all and doesn’t appear to pull any significant current when it’s not powering anything. 👍
That’s awesome!!! Thank you so much for sharing your experience🙏🙏🙏
I’ve also made this, but without charging cable (I don’t need it) - totally works
Enjoyed this video even if it doesn't work for me.
Short history, MacBook Pro late 2013 and Apple TB monitor, new early 2014.
Bought a late 2023 MB Pro M3 and used a TB 2-3 adapter for a year with no problems and of late sometimes would not wake up, then not at all with either the 2013 or 2024 MB's. On the 2013 the magsafe doesn't light up anymore. I tried a rear TB cable and the adapter to the 2024 and without to the 2014 with either.
My understanding is the rear TB's do not work on adapters without the magsafe charge working. If the rear TB's are on the same board as the main TB & power cable, why would that be the case?
Does your TB 2 to 3 internal cable replacement require operational magsafe power?
I don't need the magsafe power and if this internal hack works without magsafe maybe I can keep the old monitor working.
Is there a way to even see if the thunderbolt display turns on since there is no power switch (externally or internal)
Thanks in advance.
I just completed this same change minus the power because my thunderbolt cable finally died from the bends. This video was very helpful, thank you! Although I has issues when connecting this to a new Mac mini. I ended up having to skip the thunderbolt extension cable you called out here. Apple thunderbolt cable to apple convertor was the only way it would work for me.
Thunderbolt extension cables are tricky. Technically they're not supported over a certain length. It's also critical that you get a true Thunderbolt compatible extension, because I've run into lots of USB-C extension cables that only carry power and USB, no video, no Thunderbolt. Glad to hear you were successful though!
How long did it take you start to finish to just replace the one cable? Minus the power?
@@roysgti 15-20min
Wonderful work, can i ask you if can be possible to make only one usb-c cable came out of the monitor, carrying both thunderbolt signal and power?
I would really like to. But between Thunderbolt, USB-C, and Power Delivery standards, I'm just not sure how the power negotiation is supposed to go, and don't want to experiment on my brand new 16" M1 Pro! There are hubs that can do it though. Check out CalDigit.
if I just want to use it for video via thunderbolt, can I do like you did with the adaptor inside and use a thunderbolt 3 extension cable to my mac? leaving the magsafe unplugged inside? you did incredibly well everything, congrats on all the work.
Thank you, I appreciate that! And yes, you could just leave the internal Magsafe connector unplugged.
Would it be possible to join the data cable and the power cable into a single output from the monitor?
id imagine you could get a hub to run it that way
@@JustChillingDom Yep, exactly. CalDigit has one. I don't know how to properly combine power and Thunderbolt, could be complicated, and risky to my laptop!
Exactly my thoughts!
@@colindgrantI guess you can decase Mini Dock version to use it inside apple display, but the price of this hub is too high.
Thank you for this video.
I did almost the same mod based on the information here.
The major difference is that I started with the older led cinema 27" because it is cheaper and can be modded to give charge through a single connector. The only major difference between the two is the webcam.
What I did was to replace the webcam with the one from the thunderbolt display. It is a straight swap and cost about €15.
I then split the cable into the three separate cables (DP, USB and Magsafe) using a sharp knife.
Magsafe I cut and modded the same way as here using a 39k and a 390 ohm resistor in series.
The USB cable I replaced entirely with a much shorter one and the DP cable was terminated with a DP to mini DP adapter.
All of these parts I then connected to a simple USB-C dock I found for about €15 on aliexpress and extended the cable with a USB-C extension cable.
All of this of course with liberal amounts of shrink tube, a couple of zipties and even a ziploch bag to insulate the display cable. And a quick and dirty strain relief.
Total cost was about €50 on top of the €200 display and it took me and my friend maybe two hours.
It works an absolute treat. The biggest letdown is seriously that I wasn't sble to source a white braided USB-C extension cable.
That is so cool! I'm so glad you shared the details of construction. Do you know how to get more than 15-16V out of the display's power supply? Is that what the 390 Ohm is all about?
I didn't know the two models were so similar, that's great. And DisplayPort gives you many more options, like the USB-C dock you mentioned. Ever looked at TB4 docks? They're not cheap, and there aren't many options. Meanwhile video over USB-C (alt mode I think it's called?) is more and more common.
I like keeping older tech alive and it sounds like you do too. I'd love to see this project, and I'll bet lots of others too. Ever consider making a video?
Let me know if you figured out how to get more voltage from the power supply. I'm curious about using it to power a TB4 hub with PD, in order to get down to a single cable.
@@colindgrant I'm not sure it is actually possible, or at least it not easy, to get more than 16,5V out of it. And even if you did it would be close to 20V and not the 21V requried for the PD adapter to deliver the 20V level of the PD specification. So we are pretty much limited to 45W without some major modifications to the power delivery setup. And I'm fine with that. When I dock my computer it is for hours so 45W will keep the battery topped up just fine. Persumably there could be a scenario with heavy power usage (I do CAD for example) that actually has to dip into the battery reserves to keep running. But I think that is a supported scenario.
The 390 Ohm resistor was to make up the 39,41K resistor needed to start the magsafe circuit. The actual value isn't actually that critical. But I had 39K resistors as well as many other values. Bue to tolerances in resistors they could actually be quite a bit off the specified value, especially for my cheap ebay ones from many years ago. So I used 39K as a starting point and experimented with some combination until I got close enough.
Yeah, they are pretty much identical apart from the webcam and the IO on the back which on the TB has the firewire, ethernet and thunderbolt daisy chain. And since you can't daisy chain two displays in this scenario those ports probably aren't getting used by most people anyway. The casing is certainly the same and the speakers, power supply and panel are supposedly identical. So the difference is the webcam and the control board. So in this scenario I would say the Cinema Display is the better starting point unless you already own the Thunderbolt Display and the adapter.
I did consider a TB dock but they are far larger, harder to install inside the display and also cost something like €300 or more. I can't see any real benefit to that approach over mine. Maybe it would be possible to get some kind of daisy chaining going but that's it.
I don't have the time or the skills to make a video out of this. I do have a few bad pictures I took. If you would like to make a short follow-up to this video using those pictures and do some commentary explaining what is going on I'd be very happy to see it out there.
This is cool, there are some small DP adapters out there which have a second port for power, too (elecjet) so both display and power are delivered via one cable. - The regular USB needs to be connected to allow camera + keyboard shortcuts - brightness, volume etc. (even for wireless keyboards which I found odd)
From memory the cinema displays and Thunderbolt displays were available at the same time, a lot of refurbers prefer the cinema model claiming they are more reliable. - personally I don’t like the 3 adapters when connecting the conventional way.
would there be any way to combine the TB and power into one cable? iirc USB-PD negotiation happens over the power lines themselves so i wonder if the power pins going out could simply be injected into the outgoing cable?
I don't know how to combine USB-PD and Thunderbolt onto a cable electrically. I've looked into it a bit, and it's quite complex. The easiest solution would be to introduce a Thunderbolt 3/4 hub with Power Delivery to do everything over one cable. It's discussed elsewhere in this comment section.
It’s a shame you can’t get an adapter like Utab’s minidisplay model that supports a power feed, too.
Would it be possible to link both MagSafe and Thunderbolt adaptors to a USB C splitter inside the unit for a single cable option or would you loose TB capabilities?
I agree but loss of TB could be fixed with a Thunderbolt capable mini dock, something like 'belkin-thunderbolt-3-core-dock', connected in the monitor case collecting the thunderbolt and the usb-c power into one cable should work?!!? You could even add a HDMI port to the back of the screen!
The USB thunderbolt extension USB cable that you listed in the description from Amazon didn't work on my both Apple Thunderbolt display 27 inches A1407. 😢
Bummer. What length did you use? I'm using a few of the same cable with success, but all shorties.
@@colindgrant it was 2.6 ft.
@@box4aza Hmm, next step I would test without the extension, direct from the adapter to the computer.
Thank you for the great video!!!
I have a question. I'm already using another monitor that supports PD charging, so I don't need the charging function on the Thunderbolt monitor. I just want to convert the Thunderbolt 2 port to a Thunderbolt 3 port. In that case, not installing the charging module shouldn't affect the monitor's functionality, right?
Thank you :D
@@김명준-c8v that’s correct! The power and data are complete separate, just traveling in the same insulation.
Cool!!! Thanks for everything :D
So i guess we can't directly connect thunderbolt 3 into the back port? We have to use thunderbolt 2 first and then connect to thunderblot 3 converter?
Correct. Or do what I did in this video internally.
Thanks a lot Colin for this amazing video!
I currently have an Apple Thunderbolt Display (27 inches) and I wanted to change my current MacBook Air (13-inch, Early 2015) for a M1 MacBook Air and/or a M2 MacBook Air. However Apple is discouraging users to do that because they say material is not compatible. Apparently users are complaining about flickers and dead pixels appearing (top right). Have you experienced anything like this since you made the cable changes?
If not, I wonder why the team at Apple would be fixing compatibility on M1 MacBook Pro and not fix it on the M1 MacBook Pro. Both computers must be very similar.
I haven't heard about that, but if you have a link please post it! I haven't had any issues at all since doing this conversion. 🤞
I have heard about the flickering and I can confirm I have no issues, maybe an update fixed this?
I have an iMac Mini M1 with an original Mac Thunderbolt Cinema Display 27" and also an Apple 24" LED Cinema Display (Display Port), I use a powered via USB, HDMI to Display Port Adapter.
The iMac M1 Mini will not support 2 x Thunderbolt Displays. They only support 1 x Thunderbolt and 1 x HDMI. -:
Video Support
Simultaneously supports up to two displays:
One display with up to 6K resolution at 60Hz connected via Thunderbolt and one display with up to 4K resolution at 60Hz connected via HDMI
Thunderbolt 3 digital video output supports
Native DisplayPort output over USB‑C
Thunderbolt 2, DVI and VGA output supported using adapters (sold separately)
HDMI display video output
Support for one display with up to 4K resolution at 60Hz
DVI output using HDMI to DVI Adapter (sold separately)
However the MacBook Pro M1 will support more depending on M1 chip:
Display Support
Simultaneously supports full native resolution on the built-in display at 1 billion colours and:
Up to two external displays with up to 6K resolution at 60Hz at over a billion colours (M1 Pro) or Up to three external displays with up to 6K resolution and one external display with up to 4K resolution at 60Hz at over a billion colours (M1 Max)
Thunderbolt 4 digital video output
Native DisplayPort output over USB‑C
VGA, HDMI, DVI and Thunderbolt 2 output supported using adapters (sold separately)
HDMI digital video output
Support for one display with up to 4K resolution at 60Hz
DVI output using HDMI to DVI Adapter (sold separately)
I am told the M2 chip has same limitations also.
Amazing video, it’s giving me some thoughts of picking up a Thunderbolt Display for my Mac Studio.
Curious, is the MacBook able to control brightness and pass audio to the monitor speakers?
Yes! I can control brightness from the keyboard and both Thunderbolt displays show up as audio output options. I posted a 'short' that shows the brightness control from the keyboard.
@@colindgrant Woo! Thanks for the confirmation, Colin. Just picked up a mint Thunderbolt Display and can’t wait to convert it to USB-C. Owe all my thanks to you and this video.
@@moongu That's awesome!
Here's that short I mentioned. Brightness control demo'd toward the end:
ua-cam.com/users/shortsLuoRAwbNCiI
Any reason why you replaced the thunderbolt 2 cable inside the monitor, and not just use the one it had by by plugging the adapter directly to it? Any advantages to that? Amazing video btw, it is very inspiring!
I talked about that a little at the beginning. I had to replace the TB2 cable anyway, and my goal was to match the design concept of the original Thunderbolt Display. Power and data to the laptop with no dongles or adapters, total freedom of movement within the length of the cable(s) to the laptop. Glad you liked it!
@@colindgrant Ok I see. I thought replacing the TB2 cable to a newer would make it faster & more stable :) Thanks for the video
Just wondering if you put thunderbolt 2 to display port cable it’s going to work so it can be used with let say old Mac pro (2012) ?
I have the thunderbolt 2 display how do I get someone to do it for me or change it to hdmi connection
How do I get the VESA mount off of a Thuderbolt display ? Every video shows how to put it on but NO ONE says how to get one off.
On the broken one on the street Tuesday night the glass was gone but the LED display was OK the back with you OK the cables are OK I’d like to see if I can repair it and get it working again.
But I need to get the VESA mount off.
Thunderbolt displays don't come with a VESA mount. The have a tilting stand built in. I added a VESA mount to mine from a brand called Human Centric. Search for "how to remove thunderbolt display stand", there are lots of those.
@@colindgrant The VESA mount is screwed on to the back of it. Looks like a square & I did a video SHOWING it !
@@georgesenda1952 I found your video. It looks like the previous owner attached an Amer VESA kit to it. That's not original, but you can see some pictures of it here: www.amazon.com/Amer-MD179ZM-A-AMR-VESA-Kit/dp/B01BHCEZ3W
@@colindgrant Thanks but HOW do I remove it ? Assuming the display is salvageable.
@@georgesenda1952 Not sure, I've never held one. Looks like there's a head screw on the side. If you can't remove it, then just use it for mounting to a display arm. Removing it will only get you to the hinge that works with the original stand. It's not necessary to replace the LED or glass panel.
I don't understand why the Thunderbolt Display only supplies ~6V. From what I read on Apple's website, this display is supposed to deliver up to 85W. Assuming it outputs 5A that would be 17V. Does that mean the voltage is variable depending on what the Magsafe 2 connector is negociating with the internal power adaptor? So theoretically could we go DC to Magsafe 3 and the internal power supply would adapt the voltage?
I really wish I knew. I think it may adapt to load, but I have not experimented since making this video. It only put out about 15-16V for me.
@@colindgrant The original Magsafe cable is still good on my Thunderbolt Display. I'll find a way to mesure voltage between the display and my old MBA13 to see if it adapts to the load.
@@emanuelvanasse Awesome!
@@colindgrant I had the time to test it yesterday after finding by Magsafe to Magsafe 2 adapter. It started at ~3.5V and jumped quickly to ~6.4V as in your video. As soon as I plugged the MBA it jumped to ~16.6V showing 85W in the system info app. I think I will adapt your mod. Instead of using a buck converter I will put a USB-C female connector directly to the DC wires than connect my USB-C to Magsafe 3 cable into it. The power supply should negotiate with the Magsafe 3 connector but I'm not sure of that yet. Don't want to damage my MBA :-) What do you think?
@@emanuelvanasse Cool thanks for the info. 85W at 16.6V is over 5 amps! Wow! It would be interesting to validate if that much current is actually flowing, or if Apple is just telling us that it thinks it is connected to an 85W *capable* charger.
The power converter I used was more than a buck converter, it also handled the USB-PD (Power Delivery) negotiation, which is something I'm 99% sure you will need for MagSafe3. You could plug the Apple OEM USB-C to MagSafe3 cable into the power converter I used, and that should work, but not at 85W. The MagSafe3 connector is essentially just USB-PD on a magnetic plug.
I don't see how you can wire a female USB-C connector directly to the power supply in the Thunderbolt Display. Even if you get the display power supply to cough up the ~16 volts, you have to give that to a Power Delivery controller, and buck it down to the voltage level negotiated by the PD device on the other end, such as 5, 9, 12, or 15V.
In other words, I don't see any chance for your MagSafe3 cable to talk to the Thunderbolt Display's power supply. Unfortunately they don't know anything about each other.
I followed the steps (video only - I simply unplugged the MagSafe) but now, with display plugged in, I get no video nor can I hear the display fan come on. I.e. The MacBook pro shows _no_ second display. I really don't know if anything is coming out of the 40 Gbps 240 W USBc cord at all. (I opened the display back up and rechecked that all the plugs seemed snugly in place. When lifting and closing the LCD panel, there are 4 connecters to deal with - A black plastic cable bus, the screwed-in ground wire, a 6-pin connect and a weird long flat connector (w/ no pins?). The long one is the only one that never felt like it connected tightly. It only went in label-down. For diagnostics, I have only an old analog multimeter.
Might you have any trouble-shooting ideas? Thanks -SL
Here is my cautionary tale: My unit was 10 years old, and after I hot-glued into place the new cable and went to screw-down the video board, I tightened the screws too much, and three of the tiny brittle plastic towers supporting the screw sockets simply disintegrated, leaving the sockets unusable and the video board poorly reattached. Perhaps for that reason the monitor no longer worked. For lack of diagnostic equipment and knowledge, I abandoned the unit for parts. (I note that a less arduous fix is to buy a used cable like the original as a replacement, and live with the Thunderbolt 2->3 adaptor being outside the case, and just ignore the magsafe power cord).
Sorry to hear about your troubles! That's a bummer.
Not at this time, but thanks for your interest.
Could you have spliced the power and display signal together into one usbc?
Probably not as simple as a splice. With the right electronics, it could work. There are modern hubs that combined Thunderbolt 3/4 and Power delivery onto the same cable, with a single USB-C connector to your computer. I would assume you can plug Thunderbolt 2 into such a hub through the Apple Thunderbolt 2 to 3 adapter. The Apple adapter does not handle power, just TB signaling conversion. I have not seen a simpler way to combine TB2 and power onto a single USB-C cable.
Seems a little risky when it comes to removing the logic board. But yes, I just might try. My Thunderbolt Cinema Display is the best monitor I've used so far when It comes to picture clarity. Not very ergonomic if you use the standard stand though. Right now I power my MacBook Air M2 with the MagSasfe 3 and connect the Cinema Display with Apples Thunderbolt to USB-C connector. It seems to work really well. When I used my earlier MacBook Air M1 I experienced so much flicker that I discontinued using it and had to replace it with inferior monitors.
Go on, do it! If you trust yourself to say, replace a phone screen, then the logic board in these is easy.
Incredible. I have two of these monitors collecting dust. I have plans to build a workbench in my basement storage area near my lab rack. Your work just saved me from selling or chucking the ACD's. Please share updates if there are any!
That's great! It's awesome when you can extend the life of good but older tech. By the way if you have the older non-Thunderbolt display you can just use a USB-C to DisplayPort adapter instead of the Thunderbolt 3 (USB-C) to Thunderbolt 2 adapter. I'm happy to report this setup has worked very well since posting a year ago. Good luck on your workbench build!
if the type c supplied power then you dont need magsafe 3 connector if using one cable only
You're thinking of USB Power Delivery (USB-PD), Thunderbolt 2 doesn't do that and these are Thunderbolt 2 displays. Only about 15W available for accessories.
I would have to introduce a Thunderbolt 3/4 hub with Power Delivery to do everything over one cable. It's discussed elsewhere in this comment section.
@@colindgrantoh no! Some windows laptops with type c Aren’t PD! They have a charging icon but aren’t PD but thunderbolt 3!
willing to sell an PD module already put together? i want to do the same upgrade but using a usbc to magsafe cable for my m2 macbook pro
Hi Colin, Can i check if your setup can do brightness control using "Ctrl + F1/F2" keyboard shortcut?
I am having an M1 iMac and connect to 24" LED Cinema Display. I am unable to control the display brightness using this keyboard shortcut, but am able to do so with my Intel 2015 MBP.
Hence, I am using a 3rd party app known as MonitorControl on my M1 iMac to control the brightness.
It works on my M1 Mac using Control (^) + F1/F2...most of the time. I have noticed that sometimes after resuming from sleep, one or both of the external monitors will not respond to the keyboard shortcut. When this happens, I can go to Displays settings and see that the brightness slider is missing there as well. The fix is to unplug monitor power for 20+ seconds, then unplug/re-plug the Thunderbolt cable. Definitely non-ideal.
Why retrofit the magsafe 2 into usb c rather than into usb a and use a USB a to magsafe 3 cable?
You'd save a tb4 port on your laptop and actually make use of the magsafe 3 port. Did I miss something?
Yeah, that's another option. And that would definitely work with the way I converted Magsafe 2 into USB-C PD inside the monitor.
It's a personal preference. I'm reserving my USB-C to Magsafe 3 cable for travel. I could have bought another but they're $50, and I actually like having the USB-C power delivery cable on my desk for temporarily powering other things. The intention with this retrofit was to have a very clean desktop and not plug anything else into the laptop, so I was ok with using up an additional TB4 port but I see your point on that.
@@colindgrant you did a wonderful job. I wish I had the knowledge... And the talent.
Colin I saw your video and I am really inspired to do this mod as well. A couple of questions. 1. How aviod being shocked? I am a bit afaid to mod this. 2. Will this moitor work if i just remove the all in one cable and use the out side thunderbolt port? 3. Will this work with a half mod without doing the power delivery usbc?
Just to follow up, yes you can do just power or just data. No need to do both. The safest way to avoid being shocked is to leave the monitor unplugged for a couple weeks before opening it.
what monitor stands do you have to hold up those thunderbolt displays?
It cool video
Im using a Macbook pro 2017 and Thunderbolt display 27”
When using Mac os Ventura every thing is ok, no issue
But when i running windows 11 install by bootcamp, Thunderbolt display not working
Please help me, thanks you
You would need Thunderbolt drivers for Windows. Maybe check to see if Intel offers those? I'm not sure.
God mode displays! need to get this figured out
Thanks for this informative video. I have a Mac mini M1 connected to an Apple Thunerbolt Display. So I don't need the power cord. Now the Thundebolt cable seems to give up the ghost (occasional, short-term blackouts). Can I just replace the Thunderbolt cable with your method and leave the connector for the power cable empty?
Yes, you could use this method to put the adapter inside the monitor case and run a USB-C cable down to your Mac Mini. Or you could use the method recommended by @DavidMalcolm above, just buy a TB2 to TB2 cable, plug it into the port on the back of the Thunderbolt display, then coil up your original umbilical cable and ignore it!
@@colindgrant Thank you!
When the display is flickering, why does everyone feel confident that the problems stems from the thunderbolt cable, but not other components like the logic board or the power supply. Thanks for the walkthrough though.
@@leonugraha I had the same skepticism and questions. I can only share my experience:
- With single TBD plugged in using original cables.
- Same symptoms on 2015 MBP w/TB2 and also 2021 MBP M1 w/TB2-3 converter.
- Display would suddenly go fully black (not backlit, as if unpowered), with no obvious cause
- Display stayed black, did not flicker, did not self recover
- Occurred with no physical movement, no particular temperature, no change in peripherals, no identifiable length of time, or pattern of app usage.
- Arriving at my desk in the morning, display would often not wake up.
- Unplugging/replugging the TB2 cable would sometimes bring back display image, sometimes peripherals like iSight camera or built in speaker would come back as well, sometimes not.
- Only reliable recovery method was cycling power on display and rebooting laptop.
- Even while things were working, I could feel heat on the TB2 connector at laptop.
- Easiest test is to unplug the built in TB2 cable, use a standalone TB2 cable plugged into the daisy chain socket on display.
It's an all digital connection, so I think this was an issue of some signaling or voltage threshold being violated. Or perhaps the shielding was broken down and allowing interference. I believe the laptop detected something was out of bounds and just shut it down. I didn't look for logs, but there may be some.
If your display comes back on its own, that may be a different issue.
Is there a reason, why you didn't use a usb c power injector to make the whole thing a one-wire-system? Would this be possible as usual?
If you know of a way to inject *Power Delivery* into a cable carrying *Thunderbolt* signals, I'm all ears! I don't know of a simple way to combined TB and PD, short of using a hub.
I looked up some hub prices online and now know, that they are really expensive. It’s not worth ist. 😅
@@lennig100 it would be really nice though!
What happend with Mac mini or Mac Studio? Can the mac mini or mac studio with M2 be connected to the apple thunderbolt display or is there incompatibility? Do I necessarily have to use the Thunderbolt 3 to Thunderbolt 2 adapter? Or should we proceed another way? Should I use the same display cable or another one? Or is it possible with the mac M1 but not with the M2?
M1 and M2 don't really have anything to do with this modification. This video deals with converting the Thunderbolt display from Thunderbolt 2 (DisplayPort connector) to Thunderbolt 3/4 (USB-C connector).
brilliant work Colin! I want to try this out!
What was the point of removing the old cable if you could just use the adapter at the end?
You must not have watched the video.
Why didn't you just use another T2 cable out of the daisy chain port?
I did...
Does it has to be apple cable or it can be some other companies cheaper and more secure cable (like Cablecc)?
It just has to be a 60W+ USB-C compliant cable. Nothing special. There are tougher cables, but my experience Apple cables are reliably compliant, so it's what I reach for. It didn't matter so much before, but in the age of USB-C, there are a lot more requirements of the cable, and many cables simply don't meet them.
you should make a kit or a sell It completed. you will make money on that for sure. I want to do this conversion, but it sounds like to much for me. IDK why they don't just make a magsafe to usb-c adapter. I know there is one but that's so bulky and really a whole adapter block extra instead of a simple small adapter
Can i just plug an thunderbolt to hdmi cable to the logicboard and use it like an regular pc monitor?
Nope, it's not like DisplayPort or HDMI or DVI where you can adapt between them. The video signal is packaged into a Thunderbolt transport.
Interesting video. Thanks. Is there a reason not to just use two adapters at the end of the OEM cable? Thunderbolt to USB C, and Magsafe to USB C?
I tried that first and it was awful. The adapters are bulky, the Magsafe adapter overheats and connection light becomes useless, plus there is lots of stress placed on the USB-C ports. It defeated the best feature of the Thunderbolt display to me - a clean desktop. So like I say in the video, my goal was to get that back with my new Mac.
Did you lose any functionality after swapping out the OEM AIO TB cable for the replacement?
I swapped my broken AIO cable for a 2M Apple TB2 cable like the first half of the video. But the display has now lost the ability to use the built in camera, speakers and USB ports. It's basically the same as running a TB cable from the rear daisychain port. Also it now only works with my much older TB1 era Macs and crashes my M1 iMac and an MSI TB1 motherboard.
I'm considering sourcing an original AIO TB cable, but I'm apprehensive in dumping more money into the thing as it has such limited usability.
I've also considered swapping out the logicboard from the earlier LED Cinema Display, as those boards are cheap and so many parts are interchangeable, but the AIO cables are nigh on impossible to find, or 2x the price of a fully working display.
The other option and probably the one I will take, is to source a EDP driver board specific to the LG LCD display and use it as a basic external monitor
The "All-in-one" cable is really just a Thunderbolt 2 cable running next to power leads inside the same insulation. There is nothing special about the AIO cable. I have full functionality using the OEM Apple cable between my two TB2 monitors and then another connecting to a TB2 hub. Video, Mic, Speakers, USB 2.0, USB 3.0 (via hub), all work well, even using the back ports. I'd suggest getting the OEM AIO TB cable from Apple. Good luck and let me know what you find!
@@colindgrant I must have a bad logic board.
It does some other weird things like totally freezing up the OS or even crashing the system when I tried it out on a Z77 MSI thunderbolt board and a newer M1 iMac.
I can only get the basic functionality mentioned in my first comment when connected to a 2012 MBP and a 2013 iMac.
My plan for the monitor is to either get a driver board for the LG panel and gut the insides.
Or possibly ‘downgrade’ it to an LED Cinema display by swapping out the logic board and adapting the port holes at the back. All the other components seem to have been used on both models.
The snag with that plan from what I was researching, was the unique AIO cable for that 27” LED Cinema, as it’s even rarer again than the thunderbolt one.
It will be a while before I get back to it anyway.
@@BOLeary-u5b I would think the next step is to rule out the cable by using an Apple OEM cable. I had some pretty odd behavior when my AIO cable was worn out, and it was temporarily fixed by using an OEM TB cable direct from 2015 MBP to TB Display’s back port. Apologies if I missed something but it seems like those behaviors could be caused by a bad AIO/TB cable (with an internal short for instance).
Just picked up a second hand Thunderbolt display myself to attempt this mod. I have a few questions tho, why is the charging limited to 45W? I'm pretty sure that the display can deliver up to 85W, which means it shouldn't be supplying 16V but 18V right? The reason why I'm asking is that I'm going to try to add an OWC Thunderbolt Hub inside of the display, to add power delivery (which means only one cable). Most Thunderbolt Hubs are not bus powered, and mostly use 20V power supplies. PD on the hub can deliver up to 60W, which means I need a bit more than 45W right? How would I go about doing that, any tips?
Cool idea! I had the same question as you. The limitation is the voltage of the power supply inside the monitor. Once turned on, is right around 16V.
It's possible that Apple Magsafe connectors pulled high enough current at 16V to supply 85W, not sure.
But the power delivery module I used senses the 16V input and decides to shift to the nearest PD fixed-voltage output level which is 15V. My Macbook senses the charger is offering PD @ 15V, and I think it self-limits the current to 3 amps, netting 45W.
I bet if you installed a boost converter to increase the supply voltage to say, 22V, the charge module would use PD @ 20V, and give you 60W charging.
To be clear that setup would be:
Thunderbolt Display Magsafe Power Supply ->
Resistor+diode to turn it on >
Boost converter (16V in, 20V+ out) ->
Power delivery module ->
USB-C cable offering PD @ 20V
Let me know what you figure out!
@@colindgrant Thanks for the reply! I did some more reading and basically figured out what you just said. 15V indeed has a current limit which makes it usable for 45W only. I'm planning to get a boost converter to power the hub, and I'll keep you posted as soon as I have made any progress. Your resistor & diode setup is definitaly crucial for making this work, so thanks a lot!
@@colindgrant
As promised, an update... I bought a few resistors, an OWC thunderbolt hub and the mentioned Schottky diode. I connected them to the Magsafe output of the PSU, and indeed got 16.5 volts, but even after the diode the voltage was fluctuating quite a lot? I connected a boost converter nontheless, but at that point the power supply started making a clicking noise which didn't sound very healthy, and the voltage dropped to 4 volts...
I did some more reading on magsafe though, and apparently the PSU senses the current draw at 16.5v, and if it exceeds 4.1A the voltage will ramp up to 18.5 volts, or even higher. I've read that there might be contact points on the PSU that switch the voltage for calibration purposes at the factory.
As I'm not too familiar with such complicated electronics I abandoned the project at that point to make sure I don't fry the power supply. I might dig back into it in the future, but my current setup works fine for me, except for the bulky PSU of the thunderbolt hub.
I'm currently running the display into the hub using the thunderbolt 2 to 3 adapter, and running the output (with PD) into my macbook, so the goal of running one cable for thunderbolt & charging has been achieved.
I dissasembled the OWC thunderbolt hub, and I can say with certainty it would indeed fit inside the chassis of the display. It would only need a way to run it of the existing magsafe PSU, but I don't have the knowledge/experience to figure that out. Thanks anyway!
@@dogfreak3000 Thanks for the followup! Great info here. That would be super cool if you could stash the TB hub inside the display and power it from the display as well. What input voltage does it need? Can you link me to the OWC hub you bought? Or to pictures of the internals? You ought to make a "What's inside?" type video just showing the internals, that would be super helpful! C'mon, do it ;)
Anyway, I'm going to put that on the project list (but there is a long backlog right now!) Thanks again for following up.
Hi again@@dogfreak3000, I was re-reading your comment about how you read that "the PSU senses the current draw at 16.5v, and if it exceeds 4.1A the voltage will ramp up to 18.5 volts, or even higher". I would very much appreciate it if you could link me to any website that talks about that! Thanks!
All I want to do is figure out a way to use the firewire and thunderbolt ports to add a few more USB ports. Anyone have a simple solution like a chord that plugs into the firewire or thunderbolt ports and creates a dock?
use a TB3 dock to inject power and it will add a handful of highspeed ports as well, i'm using a kingston sd5200t
@ponsoldt I bought a used Belkin TB2 hub to do that.
any problems (flickering display) before changing the cable? read that the flickering is because of thunderbolt cable. my thunderbolt is hot when removed from mac mini/ macbook.
I used to have a problem where the TB2 cable end was hot, and the video would suddenly drop out. It required a combo of power cycling the monitor and replugging the cable to get it working again. Replacing the cable fixed it. You can use the port on the back of the TB display as an input if you don't want to replace the built-in cable.
@@colindgrant i think i'll replace the cable, to clean the inside, to check cooler and whatever. i got my display for free and i love it. for the moment it's ok to spend the money on a cable :)
Very nice modification. I am surprised Apple just installed a thunderbolt port on the logic board. But hey it’s great for modifications! Thanks for sharing
Yeah, right? I was surprised and delighted too!
Fantastic work, excellent solution
So you think it’s possible to connect the buck converter assembly directly to the two pins inside the supply connector? So that you don’t have to break the original cable assembly housing the power cord and Thunderbolt cable.
Or what role/function does that black plastic piece at the end of the power cable have?
@@nivt5262 You've got to fool the power supply inside the monitor into thinking it's connected to a Macbook. That's why you need the specific resistor. And the diode avoids weird interactions from connecting the two switching power supplies connected together: the power supply in the monitor, and the buck converter.
In case I misunderstood your question, you could wire the buck converter into the power supply wires without reusing using the black plastic two pin connector. Nothing special about that connector. My cable assembly was already flaky so I didn’t feel bad about cutting it up!
Is there any way to connect three thunderbolt displays to an M1 macbook pro? My current understanding and testing is that apple purposefully limits it to two external displays. And the only way I know how to make it work is the M1 MAX/ULTRA chips which allow 3.
Yeah essentially you chose how many external displays you needed when you bought the Macbook. It's a System on Chip architecture, so the video controllers are built right into the same chip as the CPU and RAM, etc. Apple doesn't limit anything, it's just that an M1 PRO chip has capability for 2 external video channels. The M1 MAX chip has more video controllers built into it. I have the M1 PRO so I used a DisplayLink adapter for the 3rd monitor. It runs off of USB. Far lower bandwidth, but the display performance is plenty fast for typical applications.
Thank you for the response! I ended up with an M1 Max laptop with three beautiful apple thunderbolt displays in sort of a T shape. It has been amazing. But my one of the thunderbolt cables was getting wonky and I kept having to set the cord at different angles for it to work. Finally just got an apple thunderbolt 2 cable and used this video to install. (no need for the power). Thank you for taking the time to put this content out there!@@colindgrant
can we simply connect 16.5V adaptor to power on the display - I just want another display ( not wanna use USB -C to charge my laptop as well? @colin grant can you help?
If I understand this correctly, you can just connect the Thunderbolt cable with the usb C adapter. - failing that the display itself can work with a Thunderbolt 2 and adapter plugged into the rear port. - it’s a fix I have used a couple of times when the displays cables are knackered.
@@simonirons Thank you for this!!
The Thunderbolt Display is powered by A/C from the wall, and there's a power supply internally. This video doesn't cover any alternate methods for powering the display. It covers how to power your laptop off of the display (using USB-C).
Amazing work here mate! I think I have a similar problem to others, but I cannot get my MacBook Pro M1 Pro 14 “ to work with the TB display via the TB2 to TB3 adaptor. For whatever reason, it just won’t fire up the TB display. Any advice would be greatly appreciated.
Thanks for the compliment! As for your issue I would try to verify operation on an older laptop with Thunderbolt 2. Make sure it's turning on as expected, and let it run for at least 24 hours, through a sleep cycle, and make sure it wakes up without issue. Lots of people have trouble with these monitors just due to the cable, or something wrong inside the monitor itself. I would just double-check all of that before suspecting anything to do with the TB2 to TB3 adapter or the M1 laptop. Maybe you've already done that.
Another thing to keep in mind is that the various M1 laptops have different limitations on the external displays that can be connected. So another test is to connect a non-Thunderbolt display to your M1 laptop and see if it works.
Hopefully one of those paths helps you find the root cause.
Is it definitely a Thunderbolt Display or is it the LED Cinema Display? The latter has a Display Port interface and would require and adapter to connect via HDMI port on the Mac.
@@symosys Yes, good point here.
@@symosys Hey. any luck sorting out your display yet?
I have a project that you might be able to help me with. I own an early 2015 MacBook Pro A1502. The MacBook has 2 x Type A, USB 3.0 sockets and a Thunderbolt 2 socket. I wish to run a NVME M.2 SSD in an external enclosure. It seems that the Thunderbolt 2 has the best data rate. But trying to find a type 2 Thunderbolt NVME SSD enclosure has proved impossible. What has been suggested it that I use the Mac Thunderbolt 2 to USB C (technically Thunderbolt ?) adapter and get a type C enclosure …. but this won’t work either because no power is sent to the enclosure via this cable setup. I could find power by using one of the USB Type a connectors on the MacBook and make some sort of cross over cable. But maybe the type C connector on the enclosure will limit the data rate and cause voltage selection issues? How would you set about this project?
Yep. Thunderbolt 2 was primarily a data transport, using Mini DisplayPort connectors. It only carried a small amount of power (15W?) and was not designed to power devices.
Thunderbolt 3/4 combines the data transport with USB Power Delivery (PD), using USB-C connectors. So you get a lot more power!
As you pointed out, the Apple TB2 to TB3+ adapter only converts the data transport, it does not inject any power.
And your MBP USB-A ports only provide about 5W.
I had the same 2015 MBP, it just plain does not supply any significant power to peripherals.
So you really need to come up with a solution that lets you supply external power. Here are a few options I can think of:
Option 1)
TB2 enclosures have external power input. Keep looking for a used TB2 enclosure, perhaps on eBay (I found a LaCie on Craigslist, I'm open to selling it).
Option 2)
Use a TB3+ dock. CalDigit is one manufacturer. You should be able to connect your TB2 equipped computer to a TB3 enclosure like this:
Wall Power DC -> dock
MBP TB2 -> TB2 to TB3 adapter -> dock
TB3+ enclosure -> dock
The dock may power your enclosure
Option 3)
Look for a TB2 dock the breaks out USB 3.1, and use a USB3.1 enclosure, with external power provided to each.
Option 4)
Probably the easiest option is to use a USB3.0 enclosure connected straight to your MBP, with external power.
This eliminates the need for a TB2->TB3 adapter or a dock. The top speed is lower, but still really fast!
Speeds (theoretical):
USB3.0 5Gbit/s
USB3.1 10Gbit/s
TB2 20Gbit/s
TB3+ 40Gbit/s (max)
Colin how can I contact you?
@@JACB006 Just added contact info, go to my 'channel' page, see the 'about' section.
i want to use it on imac as second monitor? can you guide me how? my TB display power cable is not working it flickers the display so i am thinking to do this modification and power up TB display again? any thoughts on this?
Sounds like you just need a new cable, you don't need anything in this video. Apple publishes articles about how to use an iMac as a display. I've never done it.
Really cool solution and I was able to take this on myself thanks to your great video! I am having one issue. The PD module seems to work just fine with my MBP M1 2021, charging at 45W. However when I use with a similar vintage MB Air, the charging is intermittent. This is indicated through the connection chime and the battery icon. Any ideas what might be going on? I did try different USB C cables and was able to replicate the issue with a variety of cables.
Ahh, sorry to hear that! I hoped it would be a universal solution for Macs with USB-C charging. I will think on it but I don't have any ideas off the top of my head.
had the same intermittent charging with my MBP M1max 2021 with exact wiring and components as above
Amazing video. What if I was lazy and wanted an external dock that took in Thunderbolt 2/Mini-Display port and USB-C power and outputted it all to a single USB-C cable. Does that exist?
I don't think so. I think you'll have to use a TB3/4 USB-C dock, and also use Apple's TB2 to TB3 adapter.
I’m still running an older MacBook Pro and need to adapt this to an HDMI VIDEO station with a new USB C laptop using a KVM switch. Video is my issue. Can I swap the video cable like you did, but terminate it in HDMI from USB C?
I'll probably get some specifics wrong here, but let me try and answer off the top of my head...
It gets really confusing because the names of connectors and transport standards are used interchangeably.
USB-C is a connector, used for newer transports like USB 3 and 4, and Thunderbolt 3 and 4. But it is backwards compatible with the older versions too.
DisplayPort is a connector that originally carried signals very similar to HDMI. It already existed when it was chosen as the connector for Thunderbolt 1 and 2 transports.
HDMI is a transport AND a connector for digital audio and video and maybe some security stuff. And it is backwards compatible with DVI, which is video only.
The Thunderbolt display is not an HDMI device. It connects to a Thunderbolt capable computer and makes use of the full Thunderbolt transport standard.
Video and audio and ethernet and USB data are some of the 'cars' on the Thunderbolt 'ferry', if you will. Yes, HDMI is a car that can drive on its own, between your DVD player and TV for instance, but it can't get on a ferry unless there is a terminal on either end.
My conversion still connects through the Thunderbolt transport. It's just that the adapter from Apple, stuffed inside the display, does two things: 1) it converts the Thunderbolt transport version from TB2 (display) to TB3 (computer), and 2) it coverts the connector from DisplayPort to USB-C.
From your question I can't tell if you are using a Thunderbolt Display at all. If you are, then you can't get around the fact that it must be connected to a Thunderbolt computer, regardless of the connector.
But Thunderbolt displays, and Thunderbolt computers can *output* video to non-Thunderbolt devices. Your older Macbook probably has a Thunderbolt 2 port, using the DisplayPort connector. And you can get a dongle to convert DisplayPort to HDMI. But it's just an output.
If you're trying to connect two computers to a KVM switch, and you just need to output video from your older MacBook to an HDMI input port on the KVM, then you should be good with an adapter dongle. But my older 2015 MBP also had a HDMI port, so I would just use that.
Just tried to hook up this monitor to a regular computer via a mini dp cable...without luck...same with the original cable (which I think might have been damaged)...any other solutions? When plugged into the power the display shows usb power output in the back....so something is off with the video display board, or some other issue...any ideas? what to test out? thanks.
Mini DisplayPort won't help you here. It uses that connector, but you have to have a Thunderbolt capable port.
So how would one connect it to a pc? @@colindgrant
@@derekp9737 It's a Thunderbolt display, you have to connect it to a Thunderbolt port, whether Mac or PC. Thunderbolt is more common on Mac, but many PCs have it too.
@@colindgrant So what way would one be able to connect it to a hdmi, and displayport gpu?
@@derekp9737 Can't be done. Thunderbolt displays only work with Thunderbolt capable ports, period. Thunderbolt requires an actual chipset made by Intel. Think of it as adding a card into a tower PC. It's not an adapter type of thing.
Thanks. I have limited IT knowledge. The thunderbolt 2 cable on our unit has failed. Would your idea work with only replacing the video cable and disconnecting (not using) the charging function?
If you don't need the charging function, you can just buy a Thunderbolt 2 cable and plug it into the port on the back of the monitor. That port is bi-directional.
@@colindgrant Many thanks. I will give that a go.
which mounts are those? my vesa mount can't handle the weight of just one Thunderbolt Display atm.
I honestly can't remember, but it's mentioned multiple places in this comment section.
Could you replace the thunderbolt 2 port on the logic board with USB-C rather than relying on the adapter?
The adapter translates TB2 to TB3 in addition to adapting the physical connector.
I have been trying to connect my Thunderbolt 27" Display to both of my Macbooks Pro 16" 2019 and 2016 without any luck using the Thunderbolt 3 (USB-C) - Thunderbolt 2 adapter. The monitor works fine with my old Macbook Pro with the Thunderbolt 2 inputs, I watch many videos and it works for some but not for everyone. ANy clues? thanks
That's strange. I'd probably take it all to the Apple store and see what they say because it's all Apple products and as far as I know it should work.
@@colindgrant Thx for the reply Colin. I talked to a Mac repair shop and they told me to buy a dock station with the power supply ... those Macbook Pros' Thunderbolt 3 connectors supposedly can't power Thunderbolt 2 devices :( and they are difficult to find now so I just need to buy me a new monitor ... thx for your video though
Hi, nice video! if i would like to do the same, would i be able to connect my original usb-c to magsafe instead for charging ? that would free up one usb-c port and it would look even more authentic.. only problem i have is that converter and that resister and so on, not sure i can pull that of.. but Damm that would be a killer mod, instead of that dongle hell im running now
The USB-C to Magsafe 3 cable works in other USB-C power supplies. So it should work in the USB-C power delivery module I show in this video. But you will still have to do the modifications I showed to get the Thunderbolt Display to supply power to the module. Good luck getting out of dongle hell!
Is it possible to you swap out the Lg ultrafine 5k 27” led screen into the body of a Apple Thunderbolt Display 27”
Anything is possible with enough time and resources. Why would you want to do that?
love the hustle! thanks for the info
Can I ask what size grommet u used?
The hole in the aluminum is very close to 11/16"
Alternatively just attach Thunderbolt-to-USB-C and MagSafe-to-USB-C adapters to the end of the breakout cable. That's what I did, works fine.
Yeah, true. I started out that way but the beauty of the TB display to me was two lightweight straight flexible cables that moved with the laptop and were never in the way. The adapters I had were different sizes from each other, and magsafe is a 90 degree connection, so there was always some connector being tugged on. Plus the magsafe adapter I had go pretty hot. I made this video for anyone who wants to return to just having two direct cables like the original design. That works best for me, and it was fun too :)
@@colindgrant It was interesting to watch 👍 I’d love to know if anyone has figured out a single wire solution, maybe using a hub of some kind?
@@gefthetalkingmongoose You and me both! I know there are Thunderbolt 4 hubs out now that will provide up to 100W charge and full TB4 speed over one USB-C cable. But I don't know how they inject power into the TB cable. They are pretty expensive, but I think if I used one I would ignore the power supply in the TB display, just run TB2 down to the hub, somewhere out of the way, and use Apple's TB2TB3 adapter at the hub. Then just the one cable from the hub to computer. That could be a slick setup.
I read that regular TB intended for data only still carries a small amount of power (somewhere around 10W to 15W). So I'm pretty curious how TB and 100W Power Delivery charging is combined. My sense is that it's probably complicated, and bad for your laptop if you get it wrong :)
Thank you for your video! I‘m running my MBP 2018 with the Thunderbolt Display charging via MagSafe to USB-C adapter. Unfortunately these adapters are quite unreliable and become really hot during use. So this is a genius solution for USB-C MacBooks!
@@nivt5262 Yeah I tried one out and I had the exact same experience! It was an awkward angle and length, so it was always tugging on the laptop port too.
I need more info on that dual display mount. I also have 2 TB displays and struggle to find something strong enough to hold them.
It's a VIVO STAND-V102H dual monitor arm. The same model is sold by a few manufacturers under different model numbers. It's decent but dual 27" screens is pushing it on any of the common arms out there. I've tried 6-8 different models and I like this one the best because it keeps the screens in the same orientation relative to each other.
www.amazon.com/gp/product/B08LM68CSP
@@colindgrant thank you! Yes I actually found it after I posted my comment (after lots of searching). I bought and installed it a few weeks ago. My dual 27 Thunderbolt monitors seem too heavy still, I probably need to tighten everything again. It's definitely not as smooth as yours.
@@themichaelholdren mine is not as stiff as I would like it to be. I did a lot of little adjustments On just about each screw. And I used a metal reinforcement plate on my desk so that at least the base of the V102H was solid. The way they designed it the displays are just cantilevered out too far away from the top hinge on the arm. It's strong enough to lift them, just not stiff enough to resist twisting and wobbling. Still, the best of the ones I evaluated!
@@colindgrant yup that makes perfect sense, that's my experience as well.
Morning can you tell me how to use this monitor with a non Mac computer? The screen won’t come on.
The Thunderbolt display needs a Thunderbolt capable computer. It won't work on computers with just DisplayPort, even though the plug is the same.
Can I do this without adding a power supply to charge my MacBook Air M2 ? (Just leave the socket empty without fear of a problem ?) I can't weld because I don't have any equipment and experience.
Yes, you can simply unplug the old Magsafe cable from the black connector I showed in the video, and leave that connector empty.
@@colindgrant okey, thanks a lot !
I don’t know if you’ll read my message but what are are you using for the two thunderbolt monitors. They are heavy and I can’t find an arm with the weight rating.
Hi Morgan I answered that a few other places in the comments. It's a VIVO, I don't have the model info handy but if you look around here you should see some discussion of it.
What about taking a new MagSafe 3 to USB-C from Apple and hacking the USB-C side and soldering it to the inside of the Thunderbolt Display. It's already 85 watts. You get to use MagSafe 3, you get back a USB-C/Thunderbolt port on your MBP.
I just got a 16" MBP M1 Pro, bought a MagSafe 1/2 adapter to USB-C, I only get 45 watts, plenty to keep the MBP charged since it sips power, but I would prefer to use MagSafe and get back a port.
There are a couple things that make that difficult:
1) Cost; go check out what Apple wants for Magsafe 3 cables and chargers!
2) The MS3 cable itself is USB-C based, but it needs USB-C Power Delivery negotiation so hacking off and directly soldering isn't an option.
3) The TB Display only has so much power available. I've read 'up to 85W', but it's a 16V system, so that would be over 5A and I don't think it can actually supply that much.
But what you could do is install the USB-C PD module I showed, and simply plug a Magsafe3 cable into the USB-C port. You're right, that would give one of your USB-C/TB ports back.
At the time I did this the MS3 cables were in short supply, and only available from Apple. I haven't checked recently. But at the time I wanted to keep mine for travel.
@@colindgrant thank you for the reply. When I get a chance, I'm gonna do this retrofit. I wish someone would make a plug n play solution, but I do know how to solder. Just gonna have to get around to it eventually.
Bro with all the M class macbooks out and people trying to get rid of their thunderbolt displays why not make a kit fopr people to replace. I sure would buy it!!
Can anyone recommend a MagSafe 1 to usb-c adaptor I can use for this? If I don’t have to open the display I’d prefer not to, the only problem is that I’ve yet to find an in-stock MagSafe to usb-c adaptor.
The one I tried was horrible. It got too hot to touch, the light didn't work correctly, the 90 degree interface was awkward, and it disconnected too easily. Basically it was awful enough that I made this video! I've read the same from other commenters. I bought mine on eBay, and I haven't seen any better ones. Sorry to be the bearer of bad news.
Hey Colin
My Thunderbolt display sometimes flickers which is annoying so today I received a Thunderbolt 2 to USB C cable from amazon, I opened the display and removed the old thunderbolt cable that has a magsafe cable attached to it and fitted the amazon cable, but that didn't work, do you know why?
I believe the flickering is caused by the cable therefore was planning on just swapping to a new cable, i use a Macbook pro 2018 so i do not need the magsafe or the thunderbolt 2 connection, i thought I can just switch it over with a conversion cable, maybe if I swap it with a thunderbolt 2 to thunderbolt 2 cable and use the adapt it would work that way? Any recommendations would be greatly appreciated
You're probably right about the flickering being caused by the cable. That's something I experienced and many others report.
I'd be very skeptical of that so called "Thunderbolt 2 to USB-C" cable you received. I've never heard of one, and I doubt it exists. The reason is that the conversion requires active electronics, not just pin reassignments. I would be very surprised if anyone was manufacturing an active conversion cable for this purpose.
I suspect you have a USB-C to Mini-Displayport cable. That works because the USB-C port on your Mac can fall back from Thunderbolt to Mini-Displayport.
I'm almost positive that to go from Thunderbolt 2 to USB-C, you'll have to do what I did - use a Thunderbolt 2 cable and the Apple Thunderbolt 2 to 3 converter. I think that is the only option.
Good luck!
Im using thunderbolt 2-3 apple and come the same case, sometimes flickers, i must unplug and plug again to continues using 😢
@@vietkhoamax I solved my issue by opening the display and cleaning the whole unit, removing the thunderbolt cable and cleaning the connections, reinstalled everything back together and not had an issue since.
@@Amir_Wanas_Photography great work due
@@Amir_Wanas_Photography do your thunderbolt display can running with macbook pro using windows install by bootcamp
Do the USB-A ports on the back of the display still work after changing the cable?
Yes, they are powered separately by the A/C wall plug, so this modification does not affect those ports. Keep in mind each port supplies less than 1A, more like 500mA.
I just purchase a Mac mini m1 and I quickly found out it was not going to work with my 27” Thunderbolt Display does anyone know what adapter I will need to make this work
You should only need the Apple Thunderbolt 2 to 3 adapter, the same one I used in this video.
Hi, thanks for the video. My thunderbolt 3 (USB-C) to thunderbolt 2 adapters have been broken twice in the last two months. Apple still replaced the adapter but is there any possibility that my Cinema display cable is overcharging/affecting the adapter? When I connect the old MacBook with Thunderbolt 2 to my apple cinema display, it works perfectly because there is no adapter. Thank you so much
I used the first adapter about 6 months before it is broken. Apple tested it and replaced a new one for me. The second adapter only worked for 1 day and then it is broken, with the same problems ( black screen, flickering, etc. ).
That is strange, especially because the Thunderbolt 2 connector by itself works fine with the older Mac. As a troubleshooting step I would try using the adapter with a TB2-TB2 cable plugged into the socket on the back of the monitor.
@@colindgrant Hey bud, are you saying that if someone is having issues with the original TB2 cable that is coming out of the display (flickering, etc..), then you can use a new TB2 to TB2 cable, plug it into the back, and that will also feed the video? I just purchased a TBD and a new MacBook Air, and the screen is great but every once in a while, or sometimes more frequently, it turns on and off.... bad cord? Thanks in advance.
@@roysgti that’s right!
@@colindgrant My man, thanks so much for getting back to me. I may tackle the video project eventually, but just for the TB2 cord, and not the power delivery side of it. I truly appreciate your time, your video, and your response. Cheers mate!
Will this Setup work to get a Windows Laptop connected with the Thunderbolt Display by using the Bootcamp drivers for the Display?
I'm really not sure. I wouldn't be surprised if Apple went outside specs for the TB2 to TB3 adapter, and used MacOS updates to make it work.
I tried to get my Thunderbolt Display to work with a Windows laptop during lockdown without any luck. If you manage to do this please let us know.
I tried a variety of drivers from Intel but while it could see and recognise the Thunderbolt interface, I could not get the display to come on.
There’s an adapter for MagSafe to usbc on Amazon and an adapter from thunderbolt to thunderbolt 3/usbc on apple.
Different goals.
Great video! What monitor arm did you use to hold up the displays?
Hi would like to know that as well 😃
It's a Vivo dual monitor arm. The same model is sold by a few manufacturers under different model numbers. It's decent but dual 27" screens is pushing it on any of the common arms out there. I've tried 6-8 different models and I like this one the best because it keeps the screens in the same orientation relative to each other.
www.amazon.com/gp/product/B08LM68CSP
@@colindgrant thanks!!!
so without that 39.4k resistor this wont work? Its not on your parts list in the description
Thanks for pointing that out! I'll add it. Yes, you must have the resistor in order to get the Magsafe power supply in the monitor to supply full voltage.
great video, now do you think you could create a switch to use our thunderbolts with two computers?? I've been looking everywhere and it doesn't exist. without having to constantly plug and unplug our Macs. It's the same for the new studio and xdr pros.. all kvm switches are hdmi, display port, but NONE work with this thunderbolt 2 or 3. I can't be the only one who wants this! You seem capable of such a thing!! liked and subbed by the way!
Also could you link the usb-c thunderbolt capable extension cord you're using??
Hi@@sean.sullivan, sorry I missed your comment. The extension cable is linked in the description.
As far as a KVM, I'm guessing the reason you're not finding them is that KVMs usually switch a pure video signal (well, in addition to keyboard and mouse). But Thunderbolt is a general data transport standard. It's kind of like a ferry, and video/audio/USB/ethernet are the cars that can ride on the ferry. They can drive point to point on their own, but in order to ride the Thunderbolt ferry, you have to have a ferry terminal at either end. So in order to have a KVM that acted like a ferry terminal for Thunderbolt, it would need extra chips and licensing, and that would drive up cost.
I don't know of a way to connect two Thunderbolt video sources (computers) to a single Thunderbolt display.
The nearest thing I can think of is to us a non-Thunderbolt HDMI display, and use Thunderbolt to HDMI dongles on each computer's output. I know that's not what you're hoping to hear!
I have never seen anyone put a meter clips in to an unplugged Laptop adapter or over the pc Board to see if voltage residue is still there
I'm not sure what point you are trying to make...
como hago esa adptacion en uno de 24 si no tiene ese cable
great idea! I'm upgrading my thunderbolt display!