Don’t sleep on GOOD Audio! Chasing Fast Cars w/ DJI Mic 2

Поділитися
Вставка
  • Опубліковано 21 жов 2024

КОМЕНТАРІ • 57

  • @DroneSupremacy
    @DroneSupremacy  7 місяців тому +4

    Finally managed to film some more car content with my FPV drone, action cam, 360 cam & Osmo Pocket 3! Of course the DJI Mic 2 was crucial to capture the audio to bring this edit to life.
    Hope you guys have enjoyed the intro 🙌🏼

  • @CYCLEGAMER1
    @CYCLEGAMER1 7 місяців тому +23

    Would have loved to hear the car sounds without the music.

    • @DroneSupremacy
      @DroneSupremacy  7 місяців тому +4

      Noted! I was debating whether I should post with or without the music but went with the more badass version 😂 I might post it on IG without the music though!

    • @CYCLEGAMER1
      @CYCLEGAMER1 7 місяців тому

      @@DroneSupremacySweet!!

    • @juanvaldz
      @juanvaldz 7 місяців тому

      The mix was the issue, for sure. I’m sure it wasn’t mixed with the intention of us geeking out on car sounds… but we will

  • @JC_46
    @JC_46 5 днів тому

    If I'm buying this mic and receiver solely for recording some exhaust audio, would you still recommend mic 2 over the original mic 1?
    I have read some comments that the audio is more muffled with the mic 2?
    thanks and great video

  • @hitmakerzmedia
    @hitmakerzmedia 7 місяців тому

    Great video bro! Keep killing it! 🔥

  • @McQueen_Media
    @McQueen_Media 5 місяців тому

    The only video I can find on this topic for dji mic 2. Ty! Definitely helped.

  • @florentinomercado9470
    @florentinomercado9470 7 місяців тому

    Amazing Job Mike

  • @lynsmith1096
    @lynsmith1096 7 місяців тому

    Good review Mike

  • @DominicPettifer
    @DominicPettifer 7 місяців тому +1

    Nice idea using these for car audio. I was thinking of doing the same but with the Rode Wireless Pros as they have a slightly higher Max SPL for louder sounds (123.5 db vs 120 db). How have you attached the mics to the back of your car? Adhesive pads etc?

    • @DroneSupremacy
      @DroneSupremacy  7 місяців тому +2

      Go for it! it's a great way to record car audio. I've attached the back mic on the numberplate plastic surround, via the mic clip. (you can see it in the beginning of the video at 0:09)
      And the second mic I put in the engine bay with the magnet, it's great so you can capture some induction sounds (or turbo whistle, if the car has turbo). Then since you have 2 audio tracks you can always play with the levels and include some sounds from one of the mics and remove others. I hope that helps! :)

    • @mrmotors_uk
      @mrmotors_uk 4 місяці тому

      @@DroneSupremacy
      I have just tried recording the audio from my car with dji microphones in the same locations, even with the gain set to -12 it still overwhelms the microphone and goes into the red on the display.
      Any idea how to get sort this?

    • @peepobruhmonkey8401
      @peepobruhmonkey8401 4 місяці тому

      @@mrmotors_ukwhat car? Try low cut

    • @Jdm02.nz.
      @Jdm02.nz. 3 місяці тому

      @@mrmotors_ukI’ve also got the same issue, did you find a resolution?

  • @VJC4x
    @VJC4x 5 місяців тому +2

    are you using the noise cancel feature when recording your car? great review just bought because of this

    • @DroneSupremacy
      @DroneSupremacy  5 місяців тому +2

      No need - noise canceling off, low cut filter off
      And thank you for the kind words!

  • @MrEddieNunez
    @MrEddieNunez 7 місяців тому

    Nice job on this review bro

  • @MotoPeWee
    @MotoPeWee 7 місяців тому

    Awesome! Did you use noise cancellation for exhaust sound as well or it’s better without - have you tried? Sweet ride though!

    • @DroneSupremacy
      @DroneSupremacy  7 місяців тому +1

      It’s better without! You get a lot more dynamic sound

  • @rxRaijin
    @rxRaijin 7 місяців тому +2

    Please upload without music, im debating on getting these for car recording and theres not a lot of info in this scenario

  • @rsevn
    @rsevn 3 місяці тому

    could you share what your settings were for the car audio? my exhaust sound is clipping a lot

    • @DroneSupremacy
      @DroneSupremacy  3 місяці тому

      -12db on the receiver and turn off noise cancelling 👍🏼

    • @Steezy.S4
      @Steezy.S4 Місяць тому

      @@DroneSupremacy I've tried this with mine but I still just get so much clipping, both in engine bay and rear by exhaust. I guess it is just too loud?

  • @cxmarin.
    @cxmarin. 5 місяців тому

    Securing the mics in the exterior & engine bay, did you just rely on the magnets itself?

    • @DroneSupremacy
      @DroneSupremacy  5 місяців тому

      For the engine bay - yes, magnet only
      For the mic on the back - i used the mic clip to secure it to the numberplate bracket.

    • @seanoneill7250
      @seanoneill7250 5 місяців тому

      Any concerns about engine temperature?

    • @DroneSupremacy
      @DroneSupremacy  5 місяців тому

      @@seanoneill7250 Not really, I mounted it far away from the major sources of heat

  • @rcouchh
    @rcouchh 5 місяців тому

    Could you share your mic/receiver settings? Do you lower the gain on receiver/mic? Do you use low cut or noise cancellation? Getting some weird results with my Mic 2 on cars.

    • @DroneSupremacy
      @DroneSupremacy  5 місяців тому +1

      Yes, -12 on both mics! Also noise canceling off, low cut filter off

    • @rcouchh
      @rcouchh 5 місяців тому

      @@DroneSupremacy-12 receiver and -12 mic too? Turned out I had noise cancellation on without knowing and was giving weird results.

    • @Lethal.G37
      @Lethal.G37 4 місяці тому

      My audio keeps clipping/ peaking 🤦🏽‍♂️

  • @mkv_vinh
    @mkv_vinh 6 місяців тому

    this sounds great, what gains setting are you using?

    • @DroneSupremacy
      @DroneSupremacy  6 місяців тому +1

      -12, otherwise it’s way too loud

    • @mkv_vinh
      @mkv_vinh 6 місяців тому

      @@DroneSupremacythank you! I’ll try this

  • @R1d3rBul
    @R1d3rBul 6 місяців тому

    I just thought to go for Rode m5 for recording car exhaust, but all that installation of wires getting me crazy. Do you think should I stick with Rode or go for Dji mic? Im worried for the lower SPL.

    • @DroneSupremacy
      @DroneSupremacy  6 місяців тому +2

      Wires are a deal-breaker for me, so i'd recommend the DJI Mic

    • @R1d3rBul
      @R1d3rBul 6 місяців тому

      @@DroneSupremacy Just worried about cliping, because of the low SPL capabilty of mic 2, but to be honest that 370z you were able to capture a good notes.

  • @jfoxindy
    @jfoxindy 17 днів тому

    What settings on the mic's?

  • @twiume4830
    @twiume4830 7 місяців тому

    Noise cancellation feature is awesome 🎉

  • @ItsIntelligent
    @ItsIntelligent 7 місяців тому

    how did u get that mic to stay attached to the back of the car, magnetic or clip on something ?? thanks

    • @peepobruhmonkey8401
      @peepobruhmonkey8401 5 місяців тому

      Same question

    • @emmanuelnajera8268
      @emmanuelnajera8268 5 місяців тому

      It’s magnet. And it’s super strong.

    • @ItsIntelligent
      @ItsIntelligent 5 місяців тому

      @@emmanuelnajera8268 does the magnet come with it?

    • @DroneSupremacy
      @DroneSupremacy  5 місяців тому

      Yes! magnet comes with it. As for the attaching question - i used the clip of the mic to attach it to the numberplate bracket, just in case :)

  • @akeeleferris
    @akeeleferris 7 місяців тому

    Imagine if you showed up to a shoot with your mic and forgot the camera, man, that would be a cool video

  • @ПавелРангелов-б2н
    @ПавелРангелов-б2н 7 місяців тому

    Forget that audio bro... nice tattooos :)))

  • @Jaydoublyou
    @Jaydoublyou 4 місяці тому

    Noise reduction on or off

    • @DroneSupremacy
      @DroneSupremacy  4 місяці тому

      Off

    • @Jaydoublyou
      @Jaydoublyou 28 днів тому

      tried this weekend on amg gt63 -9 on the transmitter and the audio sounded muffled almost like it some kind of noise isolation. Super weird

  • @erny-rf7bf
    @erny-rf7bf 7 місяців тому

    *ГраЦки добра презентация , as usual .*