Game Changing Spotless Water System with my new Spotless Water Booster
Вставка
- Опубліковано 13 сер 2021
- In this video I show you how I produce up to 2,500 gallons a day of spot free water with my new Spotless Water System. It is completely mobile, compact, and built to keep up with the heavy demands of a full time detailer. I refuse to pay another dime for expensive DI resin that will only last 300 gallons before needing to be replaced again. It’s boarder line thievery in my book. My entire set up is now run on spotless water from filling buckets of water, carpet extractor, chemicals, foam cannon, steamer, etc.. i have an endless supply of spot free water that is now cost effective to produce and I own the system. Absolutely game changing. Forget about renting a DI system it’s not accepted here. You own your business why wouldn’t you own your own spotless water system? Please like and subscribe. All credit for this video goes to my buddy Jerry. Thank you Jerry for the life long lessons you’ve learned and taught me.
If you are interested in purchasing a spotless water booster for your home or business, please visit www.SpotlessWaterGuy.com
Check out a full installation video here: • The Ultimate Spot-free...
These systems are not cheap. It is not another DI tank. It’s a true “system” with multiple levels of filtration, a motor, pump, float switch, and so much more. It is by far the best option to boost your spotless water production and reduce your costs in the long run. My cost per gallon went from approx $0.65 to $0.01. Thanks for watching.
🤯🤯🤯
That's absolutely nuts dude. I'm sorry, I'm terrible with math...but after your resin mod and the new system, you're going to get over 10,000 gallons of 0ppm water with the same amount of resin? Opposed to the 300 gallons you were getting before? Please correct me if I'm wrong here!
I know pretty mind blowing right? Here’s how I look at it and I could also be doing my math wrong :) I suck at math but I welcome anyone reading this to chime in and help out with the conversation. Follow me if you will… I was getting around 300 gallons of spot free water at approx. 400ppm. This morning I was able to reduce the ppm coming out of my RO down to 8ppm (since posting this video). 8 goes into 400 fifty times. 400/8=50. In other words I will get 50 times more life out of my resin from the drastic reduction in TDS. 50x300 gallons is 15,000 gallons of spot free water (theoretically). Now keep in mind the mod I did to the CR Spotless increased the DI resin yield by approx 40%. I still need to test this but if you take 15,000 gallons and now add 40% to that number we’re looking at 21,000 gallons of spot free water. That’s filling up my 100 gallon water tank 210 times with water at 0ppm before I ever have to change the resin again.
Out of this world! It looks like I need to make a trip out to AZ! Thanks for the amazing content! Curious to see how it all plays out! 🤙
Shit even if youre half right, thats still 5000 gallons
Suds And Go the video is amazing where can I get one and how much would something like this cost me?
What RO membrane are you using? How often do you have to change the carbon and sediment filters and how much does that cost? Just curious what the total operating costs are.
Awesome system!
So great to see business owners work together to provide a better product for their customers.
Someone that actually cares.
Thank you brother for taking the time to do this video for us. Thanks a million. 👍🤙
Very cool! It's great to hear of others helping each other out. That system looks like it fits perfectly into your trailer and out of the way.
There are still lots of good people in this world. That’s for sure! Thank you yes it fits great 👌
This is absolutely mind blowing Bryce. I'm in the process of building my trailer now (completely inspired by you) Once I finish the everything else on the build, I will certainly be attempting this because this is an absolute game changer.
You are the man!!
Oh man that is awesome! Congrats on the build! Would love to see some pics when you are done. RODI really is mind blowing I agree haha. When you go from producing 300 gallons of spotless water on one resin exchange to 10,000+ it almost feels wrong! Thanks for watching 🤙
Wow! just saved us CR Spotless folks a tonne of money and time saved! Thanks
I have a 3 way filtration system going into my DI water filters. Thanks for making this video .. a pre-filtering of the water does indeed prolong the life of the DI filters massively.
Love your set up. Right down to the grommets for the wall penetrations. Your level of detail is insane. Keep up the good work. This mod is awesome. I want to do a system in my garage soon and am looking for something cool like this.
I think we were writing each other at the same time lol. Dude your garage set up with the new 1322ts is so gnarly. I admire your video making skills!! Thanks for the kind words. I just like when things look great and are functional at the same time. If your looking to do a system in your garage RODI is the way to go hands down. It’s by far the most economical (in the long run). Just like the Kranzle theirs an upfront cost with a heafty price tag but it’s an investment that should pay for itself in my first year. When you can squeeze 10,000+ gallons of spotless water out of 1 resin exchange its a no brainer. Thank you for watching! If you ever want to bounce the idea of a RODI system for your garage let me know. Be happy to chat with you about what I’ve learned. Yeaahhhh 🤙
Question
Love your set up bro . I’m a DIY person not running a business. The water in the city that I recently moved is very hard . Do you know any company that install this type or similar system? I’m in northern Ca . Came across your video and liked your detail of your video so I’m a new subscriber. Wanting to do a RODI system hopefully soon .
Suds n go is so humble I am building a similar set up to his filtration system and I kept running into issues decided to call him and he gave me tips and advice on how to set it up and build pressure and among other equipment I needed for the system he is so humble and helps other Mobil detailers out thank you again
Thanks Marcos! Good luck putting your system together. You’re going to love having an endless supply of spot free water 🤙
Thank you for passing the knowledge Jerry from Tucson taught you.
Super clean, beautiful setup! Reminds me of doing pool work and seeing a diatomaceous earth filter for the first time, impressive!!
Thanks Scott!
Beautiful setup
You sir, have the sweetest trailer. Hats off 👏 🙌
Thanks Mike I really appreciate that
Great video , now I need a filtration system for my home that works this well.
Amazing setup, would love to have a trailer like yours some day. Keep up the great videos and info. Thanks
Thank you so much. Go after your dreams!
That’s definitely not a DIY set up with ur electrical and plumbing set up 🤯 it’s an amazing set up ! Love it bro
Thanks Elvis!
Your setup is insane! Loved this video and after measuring the usage of my new CR Spotless I might try this mod and measure after.
Thanks! Let me know what you discover
Love the video and info. I will certainly build something similar soon on my pressure washing trailer.
Thank you from South Africa
There is a tube you use for your resin tanks. How can I purchase that and be delivered in South Africa?
Great setup
Damn, that is an Awesome system set up. Love it.....
Greetings from the not so sunny UK! Man, that's a seriously impressive set up. I recently watched your video on your trailer and how it is set up. Enjoy the fruits of your labour!
Thank you so much! I’ve really enjoyed the set up. It’s working great for my needs. Cheers! Thanks for commenting.
Hey buddy I was happy that I called you and spoke to you about my pressure. Washing? Business. Watching your videos expires me to move forward and do better. I just noticed that when I pressure wash or do a full detail on a vehicle sometimes. I have to go back again and touch it up again on the outside because I've been having spots. Especially when I have over 20 cars at a dealership and I have to start all over or or having some friends that I have to pay them to help. Me share me some of these cars but watching your videals. I'm learning a lot about. Doing better also to make customers happy
Great chatting with you! Spot-free water is a great way to reduce time on the job and improve results. Go crush it!
Great setup up brother 💯👌🏽 your so good at what you do man....awesome
Oh man thanks so much! 👍
You just gave me a idea ima make 1 for my standard drinking water filter!
Very Nice system. A thought for consideration, the RO section requires filter replacements due to removing TDS from 400 to 10. The membranes in the RO filter self flush to extend the replacement cycle . I have found when water is first run through a water softner the RO membrane can handle those TDS much better. this further extends the cycle time to replace filters, specifically the RO membrane (maybe doubles the filter life). Just a thought. Thanks for sharing all your efforts !
WOW 😮 that thing is outstanding! I was wondering if you could make another video of explaining step-by-step of how everything is hooked up because I need this for my set-up as well too!!! lol 😂
Nice clean set up
Perfect Job My friend! I knew you could do it!
Thanks for the support!
I Built one my self for window cleaning, Pre Filter+ Ro Membran then DI Filter badaboom you're done it is perfect
Gnarly
Wow! This was an awesome video! I need to get a set up like this.
Thank you!
What an excellent job, one more weapon for our arsenal.
I am very interested in knowing more about the water system
Awesome job great invention I love it I need that in my mobile detailing as always be safe God bless William from extreme optimum auto detailing pr
Thank you! Best wishes from one mobile detailer to another.
"More Lubricity" well who doesn't love that? This is a great system I want one for my van please
Hahaha! if you’re interested in purchasing you can see it here:
ua-cam.com/video/2GzJVOpSoko/v-deo.html
@@SpotlessWaterGuy thank you I'm checking it out
Dude your set up is insane! I would love to set up my trailer just like this. Clean looking and clean running, it's perfect.
Thanks man! Im happy with how it turned out. Cheers 🤙
@@SpotlessWaterGuy I've been looking and trying to find something that I liked that worked for me. Couldn't find anything I liked untill I found yours. I hope you don't mind me stealing your idea. Cuz I'm gonna. 🤣
Haha glad you found some good ideas! I’m just a freak about functionality and esthetics. It works for me. Much success brother.
@@SpotlessWaterGuy thank you, you as well.
Amazing brother congratulations!! Great great great!! 😎👍🏼👍🏼
Woo hoo! Thanks Tony 🤙
That's an incredible system/setup for your water and hats off to you for doing it. Can't believe the savings you've created in your description and a big thumbs up to your pal Jerry from me here in the UK. Subbed and will check out more of your content, stay safe across the pond.
Way cool! Jerry is a good guy. I have known him since 1997. Good luck with your venture. I will share this video on my FB page. I am in Spokane WA.
Holy cow what a small world! Jerry is awesome. He’s turned into a great friend. I owe him a debt of gratitude for helping me understand how RODI works. Thanks for sharing!
Who is Jerry with in Tucson?
This is exactly what I've been looking to do with my trailer.
It’s a game changer for sure
This is the best job ever I really recommend this channel 👍📉❤️
This needs way more likes and views.
Thanks man that means a lot to me!
Good stuff buddy
As a guy with a black car for 22 years and a black truck for 12.....this video gave me warm and fuzzies. Im from Blythe Ca and the water there is so heavy that even water "softeners" struggle. I have been using distilled water to wash my vehicles.
Black cars and water spots love each other that’s for sure! Spotless water is awesome. Thanks for watching 🤙
wow!! I am in Michigan. I just test my water with my meter and I am maxing out at 15 PPM straight from the tap with no filters. I couldn't imagine having to deal with water that hard on a consistent basis. My wife still considers our water hard so I had to install a filter on our shower head to help.
That’s some clean water! You’re lucky!
Absolutely loving it!
Sweet thanks bro!
Here I am still stuck figuring out how to build the wall in my trailer 😂
@@Bizzy10064 haha hey man one step at a time. The people that succeed don’t give up. When others tire out you keep going. Onward and upward!!
@@SpotlessWaterGuy your absolutely right man! Appreciate it alot! 🙏
Fellow AZ detailer here. I live in Chandler and fortunately have the option of using the services of Purtek , a local company that provides pure water solutions to businesses via deionization systems of all sizes at a reasonable rates. When the resin becomes depleted, I call and they deliver a new tank and take the spent one.
Thankfully, the tank I buy/rent yields right at 1400 gals before needing to be replaced. I'm not mobile so I've got room at my shop for a big heavy tank. Your system is genius and is definitely a game changer. I can't wait to watch your sales take off as the system becomes known across the industry.
I assume you plan to market it to detailers and window washers.
All the best to you brother!
Steve McLean
Reflections Auto Detail
Chandler, AZ.
Thats awesome Steve. Good to see another fellow Arizonan! I got a quote from puretek about a year ago. They seemed like nice people. Yes anyone who has a need for massive amounts of spot free water for their personal home or business, I’m their guy. I’ve been thinking about leasing my units as an option but for now Im focused on helping others to reduce their costs/expenses through ownership. Window washers, detailers and solar panel cleaners all could benefit from my system. Thanks for the kind words! Wishing you much success in your business!
What an awesome video and AMAZING set up! Thanks 😊
Thank you!
@@SpotlessWaterGuy question… if I use this system every once in a while like 1 time ever week or every 2 weeks is there a way of taking out the residual water with the upgrade kit?
@@ernestopadron3807 if you’re using it weekly there’s no need to remove the water out of the housing. As you flush the system that will happen naturally
@@SpotlessWaterGuy awesome! Thank you for the feedback I appreciate it 🙏🏼
Another question… do you know if “softener” resin is the same thing? I’m trying to find where I can buy resin for cheap and in bulk
Awesome video
Thank you!
Just found your video. Super system! I have just purchased a CR Spotless system for home use to wash my new C8 Corvette. I live in Las Vegas, and I know our water source (the Colorado River via Lake Mead) has to be at least as bad as your unfiltered/DI water in AZ. We will see, once I get the system, how long the original CR Spotless lasts for me without all the pre -filtration and RO system to act as a feed to the CR Spotless. I don't know how often I am going to be washing my car, as I don't plan on using it as a daily driver, plus is has a clear bra and ceramic coating, but if the CR Spotless degrades too quickly, I'll certainly give some consideration to using at least part of the system you've developed here. Many thanks for posting your awesome water processing plant!
Those C8’s are a work of art! Congrats on the new car. I’d love to hear how long that CR spotless lasts you at home. Thanks for watching 👍
That’s so awesome!
Thank you!
Well done!!!... FYI anything under 20ppm is considered as (spot free) water. Going (adding) DI filters is huge bonus.
Great to know! Thanks for watching 👍
I’m out here trying to learn how dI water works … super cool. I need a cheap alternative rn just to start work
Love this set up! i have a very similar set up just a little bigger im using the 20" big blue, 40" vessel and etc. You should package this and offer it for others who doesn't have time to learn about DI water let alone put the whole kit together (it not easy setting up such system)
Thank you! A package deal is in the works :)
@@SpotlessWaterGuy when is it out?! Lol
This is the exact same kind of rodi setup I've used on my saltwater fish tanks for over a decade. Very efficient. I may even start using the water on my car. Only downside is water consumption, running rodi you waste a lot of water down the drain but you can use that water for plants etc if you dont want the waste water part just going down the drain
Man I want to get into salt water aquariums! I was very aware you guys use the same type of set up. So cool how those type of fish need ultra purified water. What is your waste water consumption like with the system you use?
@@SpotlessWaterGuy waste water depends on the membrane rejection rate you use so it can vary. I normally for one good gallon it’s 2 gallon waste water.
Just use. FRP vessel 5 litre will be sufficient. Here in the UK we would always use a 4040 RO and then polish with the resin. Lovely set up you have there
I have a spotlees system like yours but I don't reach the 000 level to dionize the water for washing, I congratulate you on the great setup 👌🏼
Thank you! What kind of system do you use?
@@SpotlessWaterGuy My system is much simpler with a 200 gallon tank, a pump that transfers the water from the tank to the filters and a 3000 psi gasoline pressure washer !!! your system is much more complete ...
@@johnmartinez1527 right on man. Here’s to working hard 🤙
I have the RV-Mod system with their green tank. I just spent way too much replacing the DI resin. Thank you for showing me how to beat the system. I am interested in your RO unit, what was the cost? All this is for my home garage system. Our water in SW Florida is just as poor as yours! Thank you again for the great video...........
My buddy Eric needs to see this. He has a detail shop in Michigan and spends a lot of $ on resin
Feel free to share my video with him. We now sell the systems if he’s interested.
This is exactly what we do in making water for salt water tanks ro/di nice set up where did you get that Stainless chamber and RO membrane of that size
That looks amazing how can we build our own system like that? Would be interested to build something similar at home to fill water tank
What about cavitation in the pump. Or bleed off point. But honestly absolutely genius. Good job
Nice work mate. I own a detaling and hand car wash in Australia and would love to set something like this up. Alas COVID has shut us down and we can not work. So it will slide down the to do list.
I’ve heard about the lockdowns in Australia. Hopefully someday soon this will pass and we can get back to normal life. Covid sucks. I’m sorry brother. Hang in there.
Nice work, kudos on the effort involved. At 8-10 ppm from your R.O., you could possibly forego the ion exchange resin altogether. But I know, why go to the effort and stop at 10ppm, lol.
Thanks Bob! Yes you got it. I need perfection lol
Hi, I've been using a system very much like that for over 18 years both in my window cleaning business and detailing, hope it's all working good for you 👍
It’s been amazing. Thanks!
am i crazy or did u blaze before this video, It's all good i detail and work better on cars when I'm medicated as well. cheers fam!
Thats very similar to what i designed, but mine is inside my basement plumbed into the spigot i use for filling my mobile tank. very clever installing it into your trailer. I still wanna see the advantages of the end you have on your pressure washer gun.
Awesome! Yeah I wanted to be able to make water wherever I went. Dude I have been loving that thing at the end of my pressure washer gun. After I finish testing it in different applications I’ll get a video up. Having the extra reach behind wheels and tires has been pretty awesome. The biggest advantage which may sound like the silliest is how much easier it is to change out the foam cannon and other fittings. More to come!
what is the the maintenance on the sediment and carbon filtration system, just filter replacement? what sediment and carbon filter system do you use and what pressure is ideal up to the RO membrane housing/or the whole system? would love to chat about this water filtration system thanks for the content!!
What a great set up ! Whats you PPM right after your sediment and carbon filter ? Im looking to build a system. I'm lucky to have 60 PPM here at my house. I was wondering if adding just the filter and no RO system would bring me down to about 10 PPM. Thanks
You have great water quality! Based on the research I’ve done filters do not remove TDS. You would need an RO system to do that.
i wanna build this for my trailer once my business picks up more you should do. a video how to make the build
Dude your friend should patent that & you could go around the country and install
Bryce, what a great hack and thks for sharing. Can you tell me what is the average gallons you use to detail a 2 door car?
Hi Larry! I use between 20-30 gallons on average for a 2 door
This is a good idea. If the purpose is to fill the space with resin is it ok to just use sa cartridges and just fill the empty spaces with resin?
Dude! This is awesome! Hope all is well with your system..I’m looking at DI systems..but by far..your set up is the Sh$&. I would love to learn more about the whole set up..starting up a business that will require lots of DI water…Thanks in advance for any advice you can offer…
Thanks Tony 🤙 feel free to email me support@sudsandgo.com
What pressure is the intake of the 4040 unit at? Can you go over the setup to regulate the waste water to permeate ratio?
This is amazing! I'm just now starting mobile detailing, and there is so much I'm learning about the trade I never considered! My goal is to reduce overhead to be as little as possible, while still using the best quality stuff. This is EXACTLY what I'm looking for! Are you planning on selling this system? Either way thank you so much for making this video! It'll be a few years before I am able to get to this point, but seeing other people actually build what I can only imagine and draw up in CAD is super encouraging! It lets me know I'm not just being over ambitious.
Oh man thanks for the kind words! Yes you’re definitely not alone. It’s fun to dream and build! Yes I am planning on selling the systems. I’m in the process of making a custom wall mount solution. It’s almost done. I wish you all the best in starting your business!
@@SpotlessWaterGuy please help guide me to build this in my shop
@@hogrider72 hey Scott! Please check out this video! ua-cam.com/video/GHj1X5IKvqs/v-deo.html
I know they will pay for itself but what’s the investment going to cost me lol
Nice video I am setting up similar system in my home to wash my personal cars. I am in California and my ppm reading is 426. I purchased much bigger di tank from on the go. Can you please let me know how big of a storage tank you running with your set up and also what type of pump. I looked at axeon ro membrane or max 4040. Which ro membrane you recommend or use. Thank you in advance for all the help
What brand RO housing and Membrane did you go with? Awesome setup and very smart as usual 👌
Do you have the model number for your RO housing/ filter? Thanks
Great Job. I am on my way to start my detailing business. Can help by sharing all the sat up and equipment info about your spot-free water systems pls
Buy a spin down filter, it's a reusable filtration and generally is used to pull down heavy metals and solids...keeps the filters less restricted from visible foreign objects. It's about the same size of your pre filters you got
Thanks for the tip! I’ll have to check that out 🤙
What is a "spin down" filter?
Great system! What booster pump are you using?
I think the water actually fills the resin then goes into the tube. It the other way around
Awesome video!! I don’t even wash cars wtf
Haha Thanks brother!
Curious to know if anyone has ever swapped the housing filter for a bigger size. I'm skeptic to know if the conversion kit would still work if the size difference were not much bigger???
Can you please list what I need to create this system in my trailer.
Apparently nobody that cleans cars also dabbles in the salt water fish tank hobby. This is how all of our water is made.
Is there a pump driving your water to the system? If so, what pump? Or is it pressurized using the pressure from the water hose?
I’ve seen this mod on the CRSpotless system. And yes there is space around the canister that isn’t filled with resin… but the claim you get more DI water, while technically true, glosses over the fact that you are putting MORE resin into your canister which is why you reap more DI water. It’s not free DI water… you put in more resin, you get more clean water. If you’re looking to not change resin as frequently, then this is a great feature, but it’s not free, clean, DI water.
Great points Tom
Yeah I'm watching this video thinking the exact same thing. Whole video made no sense. Plus you should just buy a spot free system or one of those that look the same if you don't want the cartridge, they work exactly this way with a post going into the resin.
Not exactly the brightest group here. Amateurs
Dude puts a basic ro system in and acts like he has walked on the ocean…….. ignorance is no excuse for thinking your smart
@@Miketime969 Mike you need to enjoy the simple things in life my friend. For many who don’t understand how RO works this is a game changer. Enjoy your day brother.
All or many professional window cleaners in England Holland and USA have 40/40 Reverse osmosis systems in their vans.. In the Uk the window cleaners drive around with 400 -800 liter tanks full of di-ionized water for their days work
God bless the 40/40! Thanks for watching. Best wishes.
Great video! Currently researching a water system for my own trailer. My biggest concern with RO water is the amount of waste water produced. Everywhere I look online says for every 1 gallon of RO water produces, a minimum of 4 gallons leave the filter as waste. Is this a problem you have run into? Thanks for all the informative videos you put out!
Hey Luke! This is such a great question. You’re right most RO’s waste a ton of water just to make 1 gallon. Fortunately my system has one of the best rejection rates in the biz. For every 1 gallon of water I make my system only wastes around 3/4 of a gallon. My waste water rejection rate is slightly better than 1:1. I run a line to my customers trees and plants and water them with the reject water (perfectly fine for plants).
Not true for plants the salts build up in the leaves and burn them. I have been in the plant business for 35 years.
@@brianhoekstra9841 trinjal.com/ro-waste-water-uses-for-plants-benefits/
What are you using for a water booster pump ?
Thanks
Cool setup! How many gpm can your filter system flow? Your running your filter system after the storage tank and pump, right?
Thank you! The system can filter about 2.1 gallons per minute. Correct I filter the spotless water into my tank. From filling up buckets to running it through my pressure washer. I use 100% spot-free water for everything.
Do i see a franchise in the making, great work
Thanks man! Here’s to dreaming big!
Can this be made into a portable filter system? I need to break it down for storage, as I don’t have room for a fixed installation.
Most RO systems need a pressurized accumulator tank to keeo the pressure up downstream, how do you get pressured water to your DI filter?
We are as high as 1600 here in Ventura California….
Wow Unbelievable!
Nice where did you get those carbon filters
Thats why edi was invented
What is your gpm on that set up? Im sure it slows down as time goes by but just wondering what you get when all the filters are fresh. Awesome video
Also how much water would you use to clean a mid size suv? just curious.
Hi Scott I average 2 gpm. I use about 45 gallons to wash a mid size.
This is way over the top. I sent an email as well, but would love a better breakdown of parts and suppliers. I’m sure others would too
Thanks Alan! Just sent you an email back.
Where did you get the tubes for the filter housings? I could use something like that for my whole house filtration system, changing those filters are a pain in the butt. Thanks
Here you go brother! rv-mods.com/store/DIC20-conversion-kit-p105868881