Gktech Stainless Steel Braided Teflon ABS Delete Kit - Install
Вставка
- Опубліковано 7 лип 2024
- The ABS module on the Nissan's of the 90's are renown for being unpredictable, particularly when on track. The GKTECH ABS Delete line kits are an easy bolt-on solution to remove the complete ABS system on your vehicle.
We developed these kits after the frustration in trying to remove the ABS on our own cars. The normal route is to find a car without ABS and swap the master cylinder and all lines in the engine bay, however, these cars are becoming rarer by the day.
Our kit is super easy to install, simply remove the standard lines and plug them in. Total install time should be around 30 minutes.
The lines are assembled by us in-house in Australia using quality UK made stainless steel fittings, stainless steel braided line with a Teflon inner tube and PVC outer for protection, which complies with all ADR, DOT and TUV specifications.
- Direct replacement of the standard hard lines
- Cleans up the look of the engine bay
- For race cars only, however, no permanent modifications are required.
Vehicle Compatibility:
- Nissan S13 240sx
- Nissan S13 Silvia
- Nissan S14 240SX
- Nissan S15 Silvia
- Nissan Skyline R32 GTS-T
- Nissan Skyline R32 GTR
- Nissan Skyline R32 GTS-4
- Nissan Skyline R33 GTS-T
- Nissan Skyline R33 GTR
- Nissan Skyline R34 GTT
- Nissan Skyline R34 GTR
- Nissan C33
- Nissan C34
- Nissan C35
- Nissan A31 Cefiro
NOTE: T-piece fitting will differ from photos shown here, the photo here is of our original prototype
NOTE #2: Now available for both LHD and RHD vehicles
Australia/ International
au.gktech.com/stainless-steel...
USA/ Canada
us.gktech.com/stainless-steel...
Japan
jp.gktech.com/stainless-steel...
Timecodes
0:00 - Intro
0:06 - Unboxing
0:11 - Features
1:00 - OEM Lines Removal
2:07 - Install
4:24 - Outro
Show some love to the Gktech boys
Zac/ZACBLOGNAR
Dan/DANBROCKETT
John/CASADECAPS - Авто та транспорт
Excellent! Thanks Officer Dan!
This would have made my life so much easier last week
Awesome video. Thank you 🙏
Man. Videos like this sell product so fucking well. Just purchased. Thanks!
Solid video 👍🏾
THIS is how you youtube 🤣
Super easy to watch video guys, thanks for uploading corona free videos!
Thanks for the support dude, that is the last thing we want to spread!
nice exelent
Thanks dude!
Do you guys sell the short line with 2 male sides individually or possibly as a 2 pack?
Please make an ABS delete kit for the NA miata
Is this available for a 88 Chevy truck?
Can I do this on my 2009 Mitsubishi Lancer 2.0 ES automatic trans??
On the R34 GTT, my friend has ABS sensors built into the hubs. Seeing as we went and purchased your whole wide angle kit, and are forced now to get rid of ABS, what do you do with the sensors that go to those front hubs? Please help us!
What’s the Torque Spec for the Banjo Bolts that seal against the brake master cylinder. ?
tight
Hey gktech are you guys sure the rear port on master goes to front brakes? On non abs Masters the 2 ports on the front go to the fronts and the rear port is rear brakes. Why would this change to the abs master?
Hey dude!
Yes, we are sure, the ABS vs non ABS master cylinders are different internally and it is just based off Nissans design unfortunately!
I'm removing my abs on my s13 does this kit work with my set up. I'm struggling to follow how the lines will match up since you use an s14 in the video
If unsure contact us directly VIA the website or our Facebook page. The team can assist!
Can you make the kit for NB MX5?
Maybe l'm wrong but normally all non-abs cars have a regulator for the rear brakes...whith the delete kit the car will have the same braking power on all over the wheels or no? Thanks
No sorry, all OEM brake master cylinders regulate internally which automatically splits the brake bias front to rear, so you are good to go!
@@gktech very well! Thank you
Will the abs light be on the dashboard after the install?
It will yes
Can I buy the commentary?
is this kit is legal i mean certified? can u plz help before i buy tnku
Hi: These kit came for a 96 C1500 GMC Sierra ?
Sorry they do not! Just for the vehicles listed in the description!
How would I go about plumbing a hydro into this set up?
If you are running an in-line setup, all lines and fitment is the same, except for the line that runs from the rear brake line port to the block on the chassis rail. That line needs to be replaced with the inline setup!
Does this kit work with the r32 GTR as well?? Definitely deleting the abs
Yes, we can confirm that they do fit the GTR!
@@gktech awesome!!
"fit" is a very relative statement apparently.
Can you make a kit for the 2004-2011 Mazda RX8?
It's nothing we have plans on doing, sorry.
This will fit a gx100 toyota chaser 1996 ?
We cannot confirm fitment on the Toyota chassis.
does this work on a 2003 g35 sedan?
It does not, we don't have an ABS solution for the G35.
So it definitely won't fit the 300zx Z32 also; I looked at the description already.
Hey dude,
No sorry, they have a completely different ABS setup, however, we do plan on developing an ABS unit for the Z32 chassis. You are welcome to send us an email at sales@gktech.com so I can put you on the waiting list!
Wait so will it not work with a z32 master on a 240sx hatch?
Proportion valve?
We don't believe it's required for S/R chassis.
Hello... Can i buy this for Mitsubishi triton???
Sorry, we don't have them.
1:52 hahah
Good ol nissan abs crap
1:30 who dat
The question is why u delete the abs🧐😂
It is unreliable in drifting application.