Harley Baffle Removal (Vance and Hines)

Поділитися
Вставка
  • Опубліковано 2 лис 2024

КОМЕНТАРІ • 38

  • @ebrich40
    @ebrich40 Рік тому +2

    DUDE, YOU ARE MAKING ME DIZZY AF, LOL

  • @davidmurray9193
    @davidmurray9193 4 місяці тому

    Do you have to compensate the fuel pack for baffel removal, or is it just a case of remove and enjoy

  • @kevinberdine
    @kevinberdine Рік тому

    Beautiful bike!

  • @ZONES89RS
    @ZONES89RS 3 роки тому +2

    What programmer is used for this? My 114 breakout has V&H. But I want them louder

    • @MrDynafxdc
      @MrDynafxdc 10 місяців тому

      Remove the baffles like I did, it gets louder, much louder.

    • @ZONES89RS
      @ZONES89RS 10 місяців тому

      @@MrDynafxdc I did that forever ago. Lol

  • @streezyrider121
    @streezyrider121 3 роки тому +3

    You forgot half of a baffle.

  • @sembilang8278
    @sembilang8278 4 роки тому +2

    Its there any vibration at bodyframe, hndlebar etc after u remove the baffel? Coz the sound is too loud

    • @twowheelsanti8808
      @twowheelsanti8808  4 роки тому +1

      The sound of The Pipes is too Loud?

    • @sembilang8278
      @sembilang8278 4 роки тому +1

      @@twowheelsanti8808 yeah..what i means is, if remove the baffel so the sound is louder than before..so, its they any vibration, effect from the sound

    • @twowheelsanti8808
      @twowheelsanti8808  4 роки тому

      @@sembilang8278 I Would say yes but very little that i Have noticed while riding.

    • @sembilang8278
      @sembilang8278 4 роки тому +1

      @@twowheelsanti8808 i have made one custom exhaust and shorter than yours..the vibration a bit hight..do u have any idea to reduce it

    • @twowheelsanti8808
      @twowheelsanti8808  4 роки тому

      @@sembilang8278 Have you tried using a tuner? When you remove baffle from a bike it gets rid of the back pressure and if you run it with out a tune it will have a power loss. Maybe if you put a tune on it, it may fix your issue?

  • @Twincam808
    @Twincam808 4 роки тому +1

    I read in the description at vance and hines that these pipes have an adjustable sound inserts so you can adjust the loudness. Do you know where that's located? Thanks

    • @twowheelsanti8808
      @twowheelsanti8808  4 роки тому

      just looking at them i cannot find a locations for adjustability. I think what it is referring to is buying different baffles for it?

    • @Twincam808
      @Twincam808 4 роки тому +8

      @@twowheelsanti8808 thanks. Just spoke to a rep at vance and hines. They're actually the quiet baffles that you took of that refers to the quiet inserts. He said no retuning required when removing those because there are non removable baffles located in the middle of the pipe. He also said that the quiet inserts indeed restrict the flow and it also takes away top end power. He added that they are discontinuing it.
      I had the short shots before. It sounds good but felt kinda sorry for my neighbors when I go home late at night despite of them not complaining. I bought the super radius and it's just too quiet for my taste and felt so restricted. But now that I took the quiet inserts out, they sound amazing. The sound is deep and big compared to the short shots' ear shattering sound. I'd say without the quiet inserts, it still sounds mellow but way better and less restrictive. Sorry for the long msg. Just wanna put it out there. 🤙🏼🤙🏼

    • @twowheelsanti8808
      @twowheelsanti8808  4 роки тому +1

      @@Twincam808 Appreciate the info! Glad everything went well. Be Safe riding!

    • @Twincam808
      @Twincam808 4 роки тому +1

      @@twowheelsanti8808 no worries! Ride safe my brother 🤙🏼🤙🏼

    • @marclandau4632
      @marclandau4632 2 роки тому

      @@Twincam808 Quick question. I took those small ones out of my Vance and Hines big radius and thank you for your reply pertaining to the non-removable inner baffles. I have a tunet for the bike. After doing what I did, is it still considered with or without a baffle for tuning purposes?

  • @MattyM110
    @MattyM110 3 роки тому +2

    I pulled mine out it didnt sound good to me,sounded to much like a exhaust leak,i but the baffle in half and left out packing just so one end went in and its perfect

  • @rtyughvbn12
    @rtyughvbn12 3 роки тому +1

    Thanks

  • @gixicoN
    @gixicoN 2 роки тому +1

    I currently have 1 stuck in my short shots.... smh.

  • @jakabzoltan3893
    @jakabzoltan3893 2 роки тому

    Nekem is ilyen kipufogón van de az a helyzet hogy ki kell azt még fúrni úgy lesz jó hangja Hiába húzod ki belőle a hangtompítót az még semmi nem lesz

    • @jenoverraszto9699
      @jenoverraszto9699 Рік тому

      Szia! Ha kiveszed a hangtopitot akkor mit fursz ki?

    • @jakabzoltan3893
      @jakabzoltan3893 Рік тому

      Szia egy jó hosszú Fúróval még egy gátat el lehet érni, Mivel az a rész egy kipufogó dob ami nem látszik szemből csak hátulról és az letompítja a hangot