First off I want to say is thank you so much for what you guys are doing! I love my triumph and I love what you guys are doing with them! I ordered my Tec slip-ons and they got to me in Hawaii in like 3 days! I'll be ordering the cam shaft next.
Hi, I have watched several of your videos and I do really appreciate the time and effort that goes into you doing them. I like that cameraman asks pertinent questions during the videos.
I just fitted mine on my 2017 Street Cup, sounds great! The initial fitment of the pipes over the stock exhaust is quite tight, a little grease helps, but it was still quite a struggle. Particularly the right pipe, for some reason.
Just fitted a set of these this morning. Really easy to follow and they look and sound really nice. Slight issue with there not being a M6 nut or washer in the pack, so meant a trip to Halfords mid-fit. Not ideal.
I am thinking about getting a Speed Twin 900 and I see a few goodies here I'd like on mine: Rear axle bobbins for a paddock stand, that gas cap, the LED blinkers, the rear suspension. Something I found confusing about the decibel readings was the stock exhaust sounded much quieter with db revs to 85 and the TEC shorties which sounded much louder and harsh without the baffles only revved to upper 70's to 81. (?)
Hi there. This is a piece of art! Congratulations. I am from Brazil, have a Triumph Street Cup and would like to try these slip-ons. What would be the easier way to do it? (Amazon?). We also have a “Triumph Classics” group with over 150 members only in my home town (Belo Horizonte) that also have hard time accessing Brit products in general. Thanks in advance. Phil
Wonderful product. One question I installed mine and ran the engine there was a little water/carbon that dripped off the clamp where it attaches to the pipe. Is this normal. I feel that I really cranked on the clamp. Any ideas?
I have a lot of experience with db testing, a cell phone app is not in any way accurate, and number 2, you are over loading the microphone you are using, you need to either get it farther from the exhaust, or get a quality microphone, all that aside, I like the pipes, job well done I may buy a set.
OMG I love the sound from these slip-ons. How is it that they sound so deep? I have the mash 400cc single cylinder, cafe race triumph copy look. Would they fit my bike? How much, and how much to post out to Vietnam?
they wont fit, these are specially made for the Street Twin, you have to modify them which might involve some welding and fabrication to fit them on the Mash 400.
I don't think you'll be disappointed. I should think the lack of a cat would make it better still. I love the sound mine makes now when cogging down to second at about 40 mph. Totally off subject, but the village next to ours is called Throckmorton...
Poacher007 I don't know, I thought the burbles were caused by back pressure in the exhaust and if you did a decat I would think it would be less restrictive, and therefore have less burbles but who knows. Oh wow! It's an English name so I wouldnt be surprised if it were out there, but I know there's some towns in Texas in the US that are named Throckmorton
Hi mister, seeing your's vídeos and help me about a loot things, you can help me please, to find Cruise Control for Bonneville T120? I try buy It on Brazil, but here is verry spence.
Any luck? I also have water cooled T100 (2017 black) and really want these slip ons but it looks like the bend in the street twin exhaust is greater than the T100. And the copies didn’t fit either???
Installed slip on silencers, from left side pipe water is leaking where silenser is fixed to original pipe and clamp & bracket is fixed. An idea what could be the reason please?
Just condensation if you get it more live in a high humidity climate . All after market slip ons will do this and less noticeable once the exhaust has fully heated up
First off I want to say is thank you so much for what you guys are doing! I love my triumph and I love what you guys are doing with them! I ordered my Tec slip-ons and they got to me in Hawaii in like 3 days! I'll be ordering the cam shaft next.
Definitely the best sounding and looking slip on I’ve ever heard on a Triumph.Well done!
This is absolutely beautiful. The sound of fury at the end! Ahhhhhhh LOVE IT!
Hi, I have watched several of your videos and I do really appreciate the time and effort that goes into you doing them. I like that cameraman asks pertinent questions during the videos.
I just fitted mine on my 2017 Street Cup, sounds great! The initial fitment of the pipes over the stock exhaust is quite tight, a little grease helps, but it was still quite a struggle. Particularly the right pipe, for some reason.
Just had first long run out on bike with new TEC slip on exhausts. The sound is amazing. Thanks.
Just fitted a set of these this morning. Really easy to follow and they look and sound really nice. Slight issue with there not being a M6 nut or washer in the pack, so meant a trip to Halfords mid-fit. Not ideal.
Thank you very much for the detailed (de)installation part of the video, including the "trick" with the screwdriver. 👍👍
Fantastic vid so helpful both really enthusiastic about there product and knowledgable can’t wait for my pipes to come
Are you going to make these for the street scrambler as well
I am thinking about getting a Speed Twin 900 and I see a few goodies here I'd like on mine: Rear axle bobbins for a paddock stand, that gas cap, the LED blinkers, the rear suspension. Something I found confusing about the decibel readings was the stock exhaust sounded much quieter with db revs to 85 and the TEC shorties which sounded much louder and harsh without the baffles only revved to upper 70's to 81. (?)
Look & sound fantastic! Great job 👍🏻
Hi there. This is a piece of art! Congratulations. I am from Brazil, have a Triumph Street Cup and would like to try these slip-ons. What would be the easier way to do it? (Amazon?). We also have a “Triumph Classics” group with over 150 members only in my home town (Belo Horizonte) that also have hard time accessing Brit products in general. Thanks in advance. Phil
Do you guys see you ever making a black exhaust in the same style?
Wonderful product. One question I installed mine and ran the engine there was a little water/carbon that dripped off the clamp where it attaches to the pipe. Is this normal. I feel that I really cranked on the clamp. Any ideas?
I literally can't fit the left slip on onto my 2022 street twin. It's too tight. Wont go in enough for foot peg to come back on. What to do?
so in the comparison at the end its that the TEC just sounds "louder" right? I really cant tell any other difference...
Hi George, I have an x-pipe already installed, what’s the DB level like on these without the baffle?
Any plans down the pipeline for a full 2-1 system for either Twin/Cup and the Thruxton? Also, any potential plans for the Bobber?
I have a lot of experience with db testing, a cell phone app is not in any way accurate, and number 2, you are over loading the microphone you are using, you need to either get it farther from the exhaust, or get a quality microphone, all that aside, I like the pipes, job well done I may buy a set.
Hi George. Will you be producing slip on silencers for the T120-1200?
What are the approx. torque specs when tightening exhaust clamps?
Excellent work!! What would be the total weight of the product? I want to get it to INDIA
Nice. I may consider you when I get my Bobber soon.
OMG I love the sound from these slip-ons. How is it that they sound so deep? I have the mash 400cc single cylinder, cafe race triumph copy look. Would they fit my bike? How much, and how much to post out to Vietnam?
they wont fit, these are specially made for the Street Twin, you have to modify them which might involve some welding and fabrication to fit them on the Mash 400.
ripmax333 thanks for replying, it's a shame that they won't fit. The sound is what I'm looking for.
do these fit my 2010 bonneville ?? becouse the slip ons you have on your site for aircooled bonnevilles are ugly these are nicer !!!
Are your parts in USA now
They look great George, much better than stock. I like the Tec logo,,,,,, is it etched or are they stickers,,, would look good on my 2 into 2
logos are etched on,but if you don,t like them you can sand and polish them out
Cool Sound ❤❤❤
Should have done a clip with the baffle inserted in the pipes.
Hi, i have Street Cup and i am from Germany. Have you shipping to Germany? Can u postet a link to market where can i buy it?
Do you do frame/crank case protectors/sliders?
will these fit a 2020 T120?
Link to buy that exhaust's...
Hi there. Does it fit with the Continental RE 650? Maybe with some adjustments... Your opinion please ;) Could be awesome.
Up ! :)
@@imagibenDo you think this is s forum?
Do they still burble on deceleration? The stock did it very slightly, would really like to keep that if not improve on it
I've just fitted a pair of these, and the burble on overrun is still there, in fact it's enhanced.
Poacher007 oh thank goodness, I just purchased a pair yesterday. Let's hope doing a decat doesn't take that away
I don't think you'll be disappointed. I should think the lack of a cat would make it better still. I love the sound mine makes now when cogging down to second at about 40 mph. Totally off subject, but the village next to ours is called Throckmorton...
Poacher007 I don't know, I thought the burbles were caused by back pressure in the exhaust and if you did a decat I would think it would be less restrictive, and therefore have less burbles but who knows.
Oh wow! It's an English name so I wouldnt be surprised if it were out there, but I know there's some towns in Texas in the US that are named Throckmorton
Hi mister, seeing your's vídeos and help me about a loot things, you can help me please, to find Cruise Control for Bonneville T120? I try buy It on Brazil, but here is verry spence.
Do you make anything that fits a 2017 T100??
Just picked up the x pipe and slip ons it doesn’t seem to fit ,i have a 2019 T100 bonneville
Any luck? I also have water cooled T100 (2017 black) and really want these slip ons but it looks like the bend in the street twin exhaust is greater than the T100. And the copies didn’t fit either???
Will you be coming out with a cat delete for the Thruxton R?
Yes we are working on cat delete pipes for all the new models and will be available from spring 2017
Installed slip on silencers, from left side pipe water is leaking where silenser is fixed to original pipe and clamp & bracket is fixed. An idea what could be the reason please?
Just condensation if you get it more live in a high humidity climate . All after market slip ons will do this and less noticeable once the exhaust has fully heated up
Thanks,, Much appreciated.
can you get these black??
I don't understand how those are silencers. It sounds way louder.
Do you need an ECU remap for these silencers?
I had put in a request on your website, but got no reply
Cheers
No remap required with or without baffles
Intro webshop price on these £239.99
Pair? or Each? please
price is for a pair with all fittings
Price is for a pair with fitting kit
Hi! And what about nternational shipping? I'm living in Moscow, Russian Federation with my Street Twin
will this work on 2018 t120 black?
Nop. It will not.
Will these fit the T120 too?
Nop.
Can I assume this is the link to purchase? shop.tecbikeparts.com/products/mega-silencer
Found shop.tecbikeparts.com/products/street-twin-silencers
Is it just me but it makes the bike sound louder but the sound is kind of awful...