How to Setup Silhouette CAMEO 5 😍 Get ready for your first Silhouette CAMEO 5 with this start to finish setup video! The best CAMEO 5 bundles are coming!! shrsl.com/4970m 👏 Silhouette CAMEO 5 set up start to finish written tutorial: www.silhouetteschoolblog.com/2023/10/how-to-setup-silhouette-cameo-5-start_7.html 📦 Silhouette CAMEO 5 Unboxing Video: ua-cam.com/video/CwoyrjozkGY/v-deo.html Silhouette CAMEO 5 and CAMEO 5 Plus Everything to Know: Full Spec Sheet: www.silhouetteschoolblog.com/2023/09/new-silhouette-cameo-5-and-more-new.html
I'm so pleased to see that they have kept a USB port on the machine. I'm a bit of a luddite when it comes to technology, and as I'm planning on using the machine with a desktop PC, a wired connection is just so much easier for me.
Thanks so much, this saved me a lot of time! The set-up instructions got me lost and I missed the "upgrade firmware" cue entirely. Really appreciated seeing the close-ups of moving the rollers, loading the cutting tool, and releasing the front panel.
I FIND IT A BIT FUNNY .. I HAVE NEVER BEEN ABLE TO MOVE MY ROLLER BAR FOR MY CAMEO 2!! I COULDN'T GET IT TO TURN... AND THERE'S SO FEW VIDEOS ON THAT PARTICULAR MACHINE, WHICH I GET, BUT I'VE HAD IT FOR AROUND 3 YRS?? A LONG TIME... BUT I'VE GOTTEN PRETTY GOOD AT IT.. ONE REASON I'M SO EXCITED FOR THIS 5!.. I WAS ABOUT TO BUY THE 4 WHEN I SEEN YOUR VIDEO OF THE RELEASE.. THAT'S THE POWER OF GOD! LOL I HAD BEEN CONTEMPLATING BUYING THE 4... GLAD I TOOK MY TIME IN DECIDING! LOL
THANKS AGAIN FOR THE BEST INFO! I'm glad I waited to comment again.. I am Glad you reinstated that the Cameo 4 is pretty equivalent to the 5! (excpt for NEW TOOLS...sure)... I wanted to just put this in here so if anyone else is guessing like I was and did.. YES.. YOU STILL NEED TO RE-DOWNLOAD THE SILHOUETTE STUDIO EVEN THO YOU HAVE THE SAME VS BEING RE-DOWNLOADED.. BC ITS HELPING WITH THE NEW MACHINE ITSELF, which you did say, but I was still hesitant to re-dwnld bc it was the same.. so maybe if someone else finds themselves guessing abt that too.. yes! do it again.. and THANKS for the set up and prepping the machine video tutorial!! I WOULD NOT HAVE GOT IT DONE WITHOUT YOUR HELP! YOU ARE A ROCK STAR OF THE SILHOUETTES! :) THANKS! OH... one more qu.. IF YOU happen to know... I understand they're just getting these machines out as well as the tools, but not sure who or where to normally check for these kinds of things, bc again... I WAS USING THE "2".. DINO!! but one: the ES Mat; where or who will typically have these for sale? or can you say? I figured that Silhouette would be the place to actually keep checking with for the machine itself, but Amazon is where I found mine, and I do know another store had some, but Amazon was faster of course! lol I have one last qu. (for the moment, sorry, I'm so excited and just need to know ALL the things!) I CAN USE THE 3mm KRAFT BLADE in the Cameo 5? I'm assuming so.. can you tell me this... if we try to use "whichever" tool and it not be compatible.. what would happen? NOTHING? WEIRD NOISE? OR WOULD IT GIVE US SOME INFO ON THE SCREEN OR IN THE DESIGN? THANKS SO MUCH! YOU ARE VERY APPRECIATED!! HAVE A BLESSED DAY!!
Thanks Melissa a really useful video. My machine did not want to update firmware. Read your comprehensive notes which put my mind at rest. Your a treasure.
Hi mi cameo 5 sucks with bluetooth and you didnt show what cabble it uses to connect from the cameo to the computer. can someone help me tell me this information please🥺
QU- Can we use the Kraft blade 3mm in the Cameo 5?? and for some reason I couldn't get the auto detection to recognize my mat... now I'm glad I came back to see what I was or wasn't doing.. MASH THE ARROW... lol thanks!
Hello, I have a problem with re-cutting again when I turn off Bluetooth or disconnect the cable because I have another device, Cameo 4. I want it to work at the same time, knowing that the program was last upgraded to Business Edition.
Hello, thank you for your Cameo 5 presentation, I have a question, would it be possible to record a video while working? I am curious if it is actually quieter than the cameo 4. I have the 4 and it is terribly noisy, making it impossible for me to use it in the evening when the kids are asleep. I would be very grateful to you for such a video.
I just got my 5 and was super excited to use it…cut a bunch of vinyl with the auto blade only to have it not cut all the way through on a lot of details. 😢 You recommended the 1mm blade, do you need to get multiple blades for different mediums? I am going from the original Cameo to the new 5!😳
No, you can use the same 1mm blade for different materials. The depth of the blade can be adjusted manually by turning the top of the blade holder to adjust the distance of the blade that's exposed
@SilhouetteSchool This is so helpful, thank you. I can only use version 4.4.3 on my current laptop and was considering the Cameo 5. I'm thankful for your response.
Hello thank for the usefull video. I have a the Cameo 3 and would like to purchache Cameo 5, my question is, will I be able to use all the files I bought from the Silhouettedesignstore, or will they be lost with the new Cameo 5? Thank you
Hey Melissa, I got my Cameo 5 today and I’ve not been able to get past the firmware update. It says it’s updating but then the status disappears and the send button isn’t clickable. If I restart it tells me again that I need to update the firmware. It also doesn’t recognise my autoblade. Any ideas what I may be doing wrong? I’m also using Mac with the Ventura OS.
Hello I just recently purchased a cameo five, I have the cut blade set and locked, I then did the firmware upgrade. In the carriage 1 dialoge box popped up a message saying "No Carriage 1-compatible Cut action found for this materiasl. Select a different action, or click MORE to define new setting." Is this because I just went to the firmware upgrade and didnt have a design and material selected? Thank You for you help? Do you have any coupons available for your University? I will be paying monthly when I join.
No, this is b/c Silhouette America decided to release a machine with software that has NO cut settings. It's honeslty ridiculous! This tutorial walks you through what you'll have to do www.silhouetteschoolblog.com/2023/11/fix-silhouette-heat-pen-tool-settings.html
Hello, thank you for your response but the link you sent me was to set up the heat pen on the cameo five. You said there are no settings for the camo five do you have the correct link on what I have to do thank you very much.
I had to suck it up and buy a Cameo 5 because my Cameo 4, which I did not have very long before there was a crashstopper issue, and the Silhouette team was not helpful in the least. They didn't respond after the first message to help, and subsequent emails. I had had enough of them and just bought the new machine. Do you, or anyone have any idea what I should do with the old machine? I'd hate to just toss it in the landfill. Thanks for the tutorial as there were no instructions whatsoever.
Help o gosh help !! I purchased a new silhouette 5 and a new Apple laptop in late November 2024 I have emailed silhouette numerous times to help, no one answers their phone just directs to email.. I am ready to return the silhouette as the last one one my account was a 2 machine no where can I figure out how to update in my account to add the new machine to my account . It gets me so close to connecting to silhouette studio then bumps me off the site I have tried so many utube videos but still no success . I would be truly grateful if there is any way you could help me with this issue…pretty please and forever in your debt ….regards Jane
I cannot get my computer to let me download the new update for the cameo 5. Any idea why it won’t let me or what steps I need to take? I’ve tried everything I know to do and it won’t download and install.
Hi @kalimaddox5295, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
Hey Melissa wanting to get a dtf printer but I'm intimidated by the daily maintenance they say it needs..also if I'm going on vacation.. what do you do..can you do a video PLEASE 🙏
If you can't print every day - even something a simple as a nozzle check - then I would suggest an alternative to DTF. The only exception wouldbe if you get an Epson F2100 / 2270 or STS DTF printer but those are much more expensive. If you're looking for desktop size under $5k and can't print everyday I would probably go in another directly like White Toner. ua-cam.com/video/Eb6jlT2K9J4/v-deo.html
My cameo 5 is scheduled to deliver tomorrow. Yaaayyy! Ive got my silhouette studio updated and ready to go. 1st question, do the adapters for the cameo 4 work in the 5, likd for CB09 blades, etc? Wondering if i should hold on to the adapters and blades, or give to my daughter in law. Now to say, can hardly wait for the ES mat, foil tool, and embossing tool to come out!
Hey there! Check out the full tool compatibility chart in this blog post: www.silhouetteschoolblog.com/2023/09/new-silhouette-power-tools-explained.html
After using Cameo 5 for 6 month I went back using Cameo 4 it cuts better and easy to load vinyl. I am very disappointed with Cameo 5 performance. If I could return it I gladly would
How to Setup Silhouette CAMEO 5 😍 Get ready for your first Silhouette CAMEO 5 with this start to finish setup video! The best CAMEO 5 bundles are coming!! shrsl.com/4970m
👏 Silhouette CAMEO 5 set up start to finish written tutorial: www.silhouetteschoolblog.com/2023/10/how-to-setup-silhouette-cameo-5-start_7.html
📦 Silhouette CAMEO 5 Unboxing Video: ua-cam.com/video/CwoyrjozkGY/v-deo.html
Silhouette CAMEO 5 and CAMEO 5 Plus Everything to Know: Full Spec Sheet: www.silhouetteschoolblog.com/2023/09/new-silhouette-cameo-5-and-more-new.html
I'm so pleased to see that they have kept a USB port on the machine. I'm a bit of a luddite when it comes to technology, and as I'm planning on using the machine with a desktop PC, a wired connection is just so much easier for me.
Wired means less likely to waste material
Thanks so much, this saved me a lot of time! The set-up instructions got me lost and I missed the "upgrade firmware" cue entirely. Really appreciated seeing the close-ups of moving the rollers, loading the cutting tool, and releasing the front panel.
I FIND IT A BIT FUNNY .. I HAVE NEVER BEEN ABLE TO MOVE MY ROLLER BAR FOR MY CAMEO 2!! I COULDN'T GET IT TO TURN... AND THERE'S SO FEW VIDEOS ON THAT PARTICULAR MACHINE, WHICH I GET, BUT I'VE HAD IT FOR AROUND 3 YRS?? A LONG TIME... BUT I'VE GOTTEN PRETTY GOOD AT IT.. ONE REASON I'M SO EXCITED FOR THIS 5!.. I WAS ABOUT TO BUY THE 4 WHEN I SEEN YOUR VIDEO OF THE RELEASE.. THAT'S THE POWER OF GOD! LOL I HAD BEEN CONTEMPLATING BUYING THE 4... GLAD I TOOK MY TIME IN DECIDING! LOL
YAY!! FOUND THIS ONE.. I COULDN'T REMEMBER WHERE YOU WERE.. LOL I JUST GOT MINE "2" DAYS AGO AND I'M JUST NOW GETTING IT OUT OF THE BOX!! SO EXCITED!!
THANKS AGAIN FOR THE BEST INFO! I'm glad I waited to comment again.. I am Glad you reinstated that the Cameo 4 is pretty equivalent to the 5! (excpt for NEW TOOLS...sure)... I wanted to just put this in here so if anyone else is guessing like I was and did.. YES.. YOU STILL NEED TO RE-DOWNLOAD THE SILHOUETTE STUDIO EVEN THO YOU HAVE THE SAME VS BEING RE-DOWNLOADED.. BC ITS HELPING WITH THE NEW MACHINE ITSELF, which you did say, but I was still hesitant to re-dwnld bc it was the same.. so maybe if someone else finds themselves guessing abt that too.. yes! do it again.. and THANKS for the set up and prepping the machine video tutorial!! I WOULD NOT HAVE GOT IT DONE WITHOUT YOUR HELP! YOU ARE A ROCK STAR OF THE SILHOUETTES! :) THANKS! OH... one more qu.. IF YOU happen to know... I understand they're just getting these machines out as well as the tools, but not sure who or where to normally check for these kinds of things, bc again... I WAS USING THE "2".. DINO!! but one: the ES Mat; where or who will typically have these for sale? or can you say? I figured that Silhouette would be the place to actually keep checking with for the machine itself, but Amazon is where I found mine, and I do know another store had some, but Amazon was faster of course! lol I have one last qu. (for the moment, sorry, I'm so excited and just need to know ALL the things!) I CAN USE THE 3mm KRAFT BLADE in the Cameo 5? I'm assuming so.. can you tell me this... if we try to use "whichever" tool and it not be compatible.. what would happen? NOTHING? WEIRD NOISE? OR WOULD IT GIVE US SOME INFO ON THE SCREEN OR IN THE DESIGN? THANKS SO MUCH! YOU ARE VERY APPRECIATED!! HAVE A BLESSED DAY!!
Thanks Melissa a really useful video. My machine did not want to update firmware. Read your comprehensive notes which put my mind at rest. Your a treasure.
Glad it helped!
Thanx for tutorial just received my cameo 5 wil try to follow the steps beginner
Hi mi cameo 5 sucks with bluetooth and you didnt show what cabble it uses to connect from the cameo to the computer.
can someone help me tell me this information please🥺
A standard printer cable will work!
Thank you for this very useful video!
Just received my cameo 5 and this video was very helpful in terms of setting my up thank you 🎉🎉
Glad it helped!
QU- Can we use the Kraft blade 3mm in the Cameo 5??
and for some reason I couldn't get the auto detection to recognize my mat... now I'm glad I came back to see what I was or wasn't doing.. MASH THE ARROW... lol thanks!
Yes you can use the 3mm blade in CAMEO 5
@@SilhouetteSchool THANKS!!
Hello, I have a problem with re-cutting again when I turn off Bluetooth or disconnect the cable because I have another device, Cameo 4. I want it to work at the same time, knowing that the program was last upgraded to Business Edition.
Thank you so much! Upgrades machines, didn’t realize I needed to download software again but it worked!
You're welcome!
I can't get my silhouette switch from 4.5 to 5. Do i have to remove old version and start fresh?
Hello, thank you for your Cameo 5 presentation, I have a question, would it be possible to record a video while working? I am curious if it is actually quieter than the cameo 4. I have the 4 and it is terribly noisy, making it impossible for me to use it in the evening when the kids are asleep. I would be very grateful to you for such a video.
Yes, it's on my list. I'll be comparing it to the CAMEO 4 cutting noise as well.
What transfer tape do you prefer?
Will they ever fix the design software to work on Mac? I can’t use any updates. I’m still on 4.4. This is frustrating!
I'm using on a Mac without issue, but I have not updated to Montorey yet if that's the issue you're experiencing.
Thank you so much for this video, i’m looking forward to see more! ❤❤
I am having problems installing cameo 5 software It doesn’t count.
I just got my 5 and was super excited to use it…cut a bunch of vinyl with the auto blade only to have it not cut all the way through on a lot of details. 😢 You recommended the 1mm blade, do you need to get multiple blades for different mediums? I am going from the original Cameo to the new 5!😳
No, you can use the same 1mm blade for different materials. The depth of the blade can be adjusted manually by turning the top of the blade holder to adjust the distance of the blade that's exposed
Will the Cameo 5 work with an older version of Silhouette Studio?
It depends what version..you have to use a version of the software that was released AFTER the machine was released in order for it to support it
@SilhouetteSchool This is so helpful, thank you. I can only use version 4.4.3 on my current laptop and was considering the Cameo 5. I'm thankful for your response.
they should make the rollers RUBBER, so that the sticker will not slide,if you not use matt
Do you think that the cameo 5 is betther than the cricut maker 3 ? What is about engraving? Tnx
I have not used the maker so I can't really compare
Hello thank for the usefull video. I have a the Cameo 3 and would like to purchache Cameo 5, my question is, will I be able to use all the files I bought from the Silhouettedesignstore, or will they be lost with the new Cameo 5? Thank you
Yes you can still use all the same files.
Hi, does the Cameo 5 come without the roll feeder for a less expensive price? I would never use the holder.
No it does not
Hey Melissa, I got my Cameo 5 today and I’ve not been able to get past the firmware update. It says it’s updating but then the status disappears and the send button isn’t clickable. If I restart it tells me again that I need to update the firmware. It also doesn’t recognise my autoblade. Any ideas what I may be doing wrong? I’m also using Mac with the Ventura OS.
Try to plug it in by USB and do the firmware update
Hello I just recently purchased a cameo five, I have the cut blade set and locked, I then did the firmware upgrade. In the carriage 1 dialoge box popped up a message saying "No Carriage 1-compatible Cut action found for this materiasl. Select a different action, or click MORE to define new setting."
Is this because I just went to the firmware upgrade and didnt have a design and material selected? Thank You for you help? Do you have any coupons available for your University? I will be paying monthly when I join.
No, this is b/c Silhouette America decided to release a machine with software that has NO cut settings. It's honeslty ridiculous! This tutorial walks you through what you'll have to do www.silhouetteschoolblog.com/2023/11/fix-silhouette-heat-pen-tool-settings.html
You can use code UA-cam for 50% off your first month of Silhouette U
Hello, thank you for your response but the link you sent me was to set up the heat pen on the cameo five. You said there are no settings for the camo five do you have the correct link on what I have to do thank you very much.
I had to suck it up and buy a Cameo 5 because my Cameo 4, which I did not have very long before there was a crashstopper issue, and the Silhouette team was not helpful in the least. They didn't respond after the first message to help, and subsequent emails. I had had enough of them and just bought the new machine. Do you, or anyone have any idea what I should do with the old machine? I'd hate to just toss it in the landfill. Thanks for the tutorial as there were no instructions whatsoever.
That's a bummer. If it's not working I would just get rid of it.
Help o gosh help !! I purchased a new silhouette 5 and a new Apple laptop in late November 2024 I have emailed silhouette numerous times to help, no one answers their phone just directs to email.. I am ready to return the silhouette as the last one one my account was a 2 machine no where can I figure out how to update in my account to add the new machine to my account . It gets me so close to connecting to silhouette studio then bumps me off the site I have tried so many utube videos but still no success . I would be truly grateful if there is any way you could help me with this issue…pretty please and forever in your debt ….regards Jane
I cannot get my computer to let me download the new update for the cameo 5. Any idea why it won’t let me or what steps I need to take? I’ve tried everything I know to do and it won’t download and install.
Hi @kalimaddox5295, it would be easier to provide you the help you are requesting if you could please send an email with some additional information. Please provide as much info (including cut settings / exact material / screen grabs) as possible when emailing. My email can be found through the contact page on Silhouette School Blog www.silhouetteschoolblog.com/p/blog-page_9.html
Question, Is there a way to turn off the second pop up to send? It's annoying to have to press send twice.
I've seen that requested but doesn't seem like it's possible yet..
Hey Melissa wanting to get a dtf printer but I'm intimidated by the daily maintenance they say it needs..also if I'm going on vacation.. what do you do..can you do a video PLEASE 🙏
If you can't print every day - even something a simple as a nozzle check - then I would suggest an alternative to DTF. The only exception wouldbe if you get an Epson F2100 / 2270 or STS DTF printer but those are much more expensive. If you're looking for desktop size under $5k and can't print everyday I would probably go in another directly like White Toner. ua-cam.com/video/Eb6jlT2K9J4/v-deo.html
Did you have any trouble updating the firmware? Mine keeps getting stuck on "checking for firmware update..." after I tell it to install the update.
No I didn't..but if you can't get it to do the firmware update via bluetooth, plug in a USB
My cameo 5 is scheduled to deliver tomorrow. Yaaayyy! Ive got my silhouette studio updated and ready to go. 1st question, do the adapters for the cameo 4 work in the 5, likd for CB09 blades, etc? Wondering if i should hold on to the adapters and blades, or give to my daughter in law. Now to say, can hardly wait for the ES mat, foil tool, and embossing tool to come out!
Hey there! Check out the full tool compatibility chart in this blog post: www.silhouetteschoolblog.com/2023/09/new-silhouette-power-tools-explained.html
I've got it printed out. Looks like my daughter in law is getting all of my extra goodies 😢
@@lisalind4813it looks like all the tools from the 4 should work in the 5, so don't get rid of your stuff yet!
How do I find the site to download silhouette?
www.silhouetteamerica.com/software
Is this the same site if you are in UK?
When will these be available?
The machine is currently available as it comes out of the box. Bundles are not yet available
@@SilhouetteSchool but they aren’t shipping yet right? They are pre-orders? At least according to the manufacturer website it’s not available yet.
@@PrismaticPixie They're shipping! I just got mine today. Only the black is available right now. I ordered from the Silhouette website.
@@PrismaticPixie Amazon has them! I got mine 2 days ago!!
@@samanthaamaddox8505 thank you! White is out of stock so I’ll wait until it’s back in!
I ordered one with a vinyl bundle. Do all machines come with the roll feeders? Mine wasn’t in the picture!
Yes they all come with the roll feeder
What about one on one info please
After using Cameo 5 for 6 month I went back using Cameo 4 it cuts better and easy to load vinyl. I am very disappointed with Cameo 5 performance. If I could return it I gladly would
Does it read registration marks on the first time all the time 🤦🏾♀️🤦🏾♀️🤦🏾♀️ so over that durn machine 😢
this is the real question and why not come out with a 24in right from the start
why didn't they actually let you make anything with it?
to show if its any good?
This is just the set up video. I will be sharing other videos soon.
I have a Cameo 5 and I cannot get this lump of crap to connect consistently. Like, I'm ready to toss it out the window.