NEW GLOCK PERFORMANCE TRIGGER GEN 1 - 4
Вставка
- Опубліковано 22 січ 2023
- The new Glock performance trigger is Gen 5 specific. This leaves a lot of Gen 1 through 4 users a little salty. but little Johnny add a little sweetness to the situation. once tested I will offer this on my website as a service. You guys can thank me later lol
Johnny glocks showing love to us in CA. Thank you for your awesome content and thinking of us :)
I will be definitely picking a few of these for my gen 3/4 :)
Awesome video. Thanks for having an outstanding channel and shop. I've ordered 2 for my 2 Gen 3, G23 40 cal builds. I just waiting on the mail.
That 48 trigger I bought from you is amazing once I got it dialed in. Tried many different ammo & no light strikes . I'm blown away at this trigger man. God bless brother.
"Johnny Glock Plus" - most excellent! Thank you!
I'm all in...will be getting the trigger and sending mine in shortly...Awesome!
Looking forward to getting a fully dialed in performance trigger from you guys
I love this guy, I felt like this is what this video was gonna be about. If anyone, its Johnny! Great work brother.
Loving the options for upgrading the most needed part of the glock .
Thank you Johnny for all what you do for Us .. i cannot have that because of import license but thank you anyway from Italy
I found the Easy way to reattach the performance trigger bar. I got my trigger today and while knocking off the old trigger shoe for the vex, the trigger bar disconnected from the housing. I had seen you struggle with it in the previous video, so I took a deep look, and it is so obvious how this is designed to make reconnecting the bar so easy. Just flip the trigger housing upside down, so the spring is exposed, then use a small screwdriver or whatever you have to compress the spring, this pushes out a polymer "T" bar that will fit into a slot in the housing. While compressing the spring, squeeze with your index finger and thumb to push the sear down and that "T" bar into the slot. Use only the tip of your finger to hold it down and then slide the trigger bar into the slot at the bottom of the spring and back through the housing. Easy and good design by Glock.
Not sure if Johnny glock is used to aftermarket glock triggers/bars etc. but I just installed my glock performance trigger and it's excellent. Takes away most of the creep the gen5 is known for and offers a light, crisp break with an excellent reset. I'm sold. I have a plus and minus connector on the way just to tinker with the pull weight but it's great as it stands. Well worth 100 bucks as long as I don't get any light strikes.
You guys are the best! I can’t wait to have you guys do one up for me 👍
I run a shadow systems XR920 that uses Gen 3 parts. So this was the video I’ve been waiting for lol
Blessings upon you Johnny! I will soon be a customer! Willie
I have this set up with the vex trigger shoe, Taran tactical connector,on a new nomad 19x frame And it is amazing, another thing to realize is that it does not matter what weight striker spring you use it will pull the same weight, mine breaks at 2.5 exactly every time, also the trigger stays in the same position whether the slide is racked or not, so for safety reasons realize that the gun always looks loaded. One more thing is when you go to rack with a pistol you feel a bump in the slide because you are compressing the striker spring when you rack the pistol this is the beauty of the trigger, the trigger pull has no interaction with the striker which makes the trigger feel completely different from any Glock, I also noticed but I'm not 100% that the striker safety is always pushed in so it may defeat the striker safety but I'm not 100% sure about that, I need to do more investigating on it
Great video, I'm very interested in seeing what's causing the long reset with the minus connector.
Thank you Johnny!!!
That's awesome! Even better that your offering the service to, thanks
Meanwhile, 5-2024 Glock now offers the kit for the Gen4 and Gen 5 . Same great price and designed in the mother ship.
Putting one in my new G17C Gen4 right now.
JG, keep rhe G fairh and rock on ✌️. Luv ya , from New SigHampshire 🇺🇲
I wish I would have done more research when I was ordering a new trigger setup for my 43x. I ended up getting a complete Apex setup for WAY to much $. With that being said, can you do the same thing you do to the timney triggers, to an Apex? If not, than it's time to start saving! Thank you for the useful videos and knowledge. Nice to actually see how things work and what you do, and not just trying to flood the market with goochie shiney shit. Keep the videos coming 🤘
Good to know Johnny , learned something new today.
amazing professor Johnny...
Now I know why you didn't answer my question on the last video. Thank you Mr. wizard
Right on, Johnny!!
Need this for my G22 gen4 asap!! Black Rambo put me on to you. Love the channel.
Just ordered a Vex. Now I gotta save up for another one plus the Performance trigger lol thanks Johnny
This is VERY exciting..
So for defensive use in a model 20 10mm, is this with the Vex shoe gonna be "better" than sending in My stock Gen IV trigger and having it tricked out + The Vex shoe? Either way I'm stoked.
Johnny glock, I'm building My first nice glock, it's a gen 4 g21. It will be a range queen most likely, i sanded the finger grooves, sanded all the grips to do a hybrid stipple all the way around, cerakote etc. I'm most likely going to put your full setup in it. I'm pretty excited to go this far, I've watched your videos for years and I'm excited to Finally try one of your triggers.
Do you know if he makes triggers for the g30 gen 4?
I’ll definitely purchase a GEN3 “combat” version with vex shoe if you decide to offer them.
I have your combat kit with the vex shoe in my MR920 and absolutely love it, can imagine this being any better than that one.
i was thinking about doing that, did you just use stock striker spring on the mr920?
@@Jrock628 I would recommend the stock striker spring otherwise light strikes are a problem. That's been my experience for what it's worth.
@@tripplej6053 same
I just followed your Lubrication video and your Friday gun cleaning video where basically you just rubbed off everything with your fingers. You are so skilled and experienced it really shows thanks for all the information🙂
edit: 'I think what I refer to as a ramp rail below is the cartridge loader. The center rail on the bottom that grabs the next cartridge from the magazine and shoves it into the barrel, or at least begins that process. What is that part called? Can it be scraping against the magazine as it continues onward to its most forward position?' Gen 3, Glock 17 with 17 cartridge magazine
I don't know if you answer questions but I have one. There is a ramp/rail down the middle of the slide facing the lower G#17 and I noticed, as you said to become intimate with my gun, lol, There seems to be a deformation on the edge of this middle ramp/rail facing the safety plunger. Its is like a burr has formed on the ramp but no damage visible to the safety plunger itself. Q: What could this affect, what do you think may be happening that is causing it. Lastly should I file it and polish it down flush on the safety plunger facing side? I am guessing that the ramp portion allows the initial grab of the next cartridge in the magazine while allowing the cartridge below it to slide safely into the top magazine position, allowing for the curvature of the bullet.
I am subscribed and have watched many of your videos but have not seen this come up so far in the videos I have watched. If there is one I would appreciate a link to it. If it is something that should not be any problem I would like to know that to save myself the work of filing etc. Is it common and a don't care or is it something worth addressing?
FYI this gun has had stove pipe ejection problems for some time. I replaced the ejector to the newer version but have yet to fire it since this fix and cleaning. I guess I was wondering if somehow the extractor was being interfered with from the safety plunger being hit or rubbed in an awkward fashion from this burr causing the extractor to grab the shell improperly. Vibration transferred through the spring etc, I'm grabbing at straws I think. I'll know more next time I get out to the range and fire a couple hundred rounds.
Anyway thanks for your videos🙂
PS: I used Versa Chem copper based anti seize at the connector/trigger bar and the only the front rail giude on the lower just as you sorta did. One drop of Otter Gun oil is too much on the bottom of the slide, I'll need to take the slide off and rub off excess. Every time I rack it I get oil dragged to the top of the gun.
Hey JG ! You do great work! Do you think there will be a Slimline Glock Performance Trigger?
Thanks Johnny!
One thing I have seen people say about the timney and this new glock performance trigger is the drop safety isn't only the hook holding the cross bar but the spring loaded sear is holding catching the striker. While rare to impossible if the sear catch were to over come the upward spring tension you are left with only the firing pin safety. So the question is could we see an evolution on this trigger where the sear catch is held in place, unable to move until the trigger bar starts to move rearward similar to the firing pin safety. Sort of a 'cocked and locked' situation where the trigger bar would not only disengage the firing pin safety but a new sear catch safety. The hook safety does stop the bar from moving down and moving the catch but the catch is really only held up via spring tension.
In Cali and Thank you my dude! =)
Awesome! I now have a g17 Gen6
Excellent
I want to see the geometry in the cut away!
Have you seen the RunnerArms Zero+ connectors, interesting geometry on them and scary light, under 2lbs with a Vex trigger system in my limited testing
Johnny thanks for taking care of my 43X today! Trigger is by far the best as is your service!
🙏🇺🇸
Any time! Pleasure meeting you
Hi Johnny love the video I was curious to now by any chance can u use that trigger for the P80 G19 ?? Is the p80 frame capable of using it or is it just for glocks?
Is it too late for me to send one in to you to for my GEN 3 G17 (home defensive) by the way appreciate you looking out for us out here in California!!! you rock!!!!
Im interested to see results with the vex shoe and standard 5.5 connector compared to the plus connector and vex shoe.
i will be puting this in my glock 20 gen 4 for sure
I would like to see what you think about shadow systems and can you put the new glock triger in them. would love to hear your opinion about them. thanks.thinking about getting one, or shud i get a glock.
Is it possibly the top angle of the connector? Not the flat edge but the top angle?
I'm so confused 😕 should I get this trigger or the timney upgrade set up u made 🤔 😫💔
What specifically makes this gen5 only? I have a p80 with rook tactical rear rails and gen 4 ejector housing. I haven't done much research on this but love what you've done. Do you think it would fit as is?
Any info on the trigger tech gock trigger? Good videos man 🤘🤘🫡
Would love one of these in the new Gen1 Glock 17's.
Can’t wait
I picked up one and got it into a lone wolf gen3/4 frame. The reset is long in it too
Whenever you get your field testing up and going with the Gen's 1-4 + the Glock performance triggers, can you give a table example of the pull,of the trigger+your vex 👟 but with the stock connector that comes with Glock performance trigger?
I received mine and is installed in a gen 3
Are you using the Gen5 slide backplate to clear the right side of the trigger mechanism housing on the non-Gen5 pistols using the Glock Performance Trigger?
Checkout the height and angle of the bird's head on the Glock Performance Trigger Bar. Looking at the website it seems dramatically taller with a different angle than stock.
Thanks Johnny
Johnny needs his own Glock. The Johnny Glock 23x with his trigger would be insane
Looking to replace the horrible trigger in the shadow systems dr920p with a good trigger but keep my same aluminum ss shoe is that possible?
What about large frames like the 20 and 21?
My 26 gen3 is always getting light strikes. Even dry firing it doesn't sound as strong as my 34 or 30sf. Not sure what the issue is but the light strikes are a big issue
Thanks Johnny for us Gen3 Cali…
Johnny, a couple of videos back you mentioned the new stronger Timney spring and you were going to provide an option for us to get one for those of us that purchased your Timney shoe upgrade. Any update on this?
Yes send me a return address postage paid envelope with five bucks per spring to Johnny Glocks 201 US highway 41 Bypass South Venice Florida 34285 and I will mail back your springs
Gen 3 26 do you offer com/ defense trigger for this?
Will this work on a p80 (g34)? I'd send mine in to find out.
Cool I'm down for the defensive mod if you can mod it for my 27.
John Deere hats are serious sheit. Look at my name.
Great job on the trigger technology. 💚💛. 💥☮️🇺🇲✌️
Johnny, do you sell a metal shoe for the 43X? I looked at the site but couldn't tell for sure.
Hey! On your website do you sell the plus connector? I saw one plus connector is 8# just to confirm
i was told this trigger can be installed on a gen4 model by just replacing the slide backplate with one designed for a gen5 .. is that correct?
hi !! just wanna ask .. can i install the glock performance trigger (designed for gen5) on my gen4 glock17 by just replacing the slide cover with one designed for gen5? thanks in advance
Now I need to find one
Why does the trigger not stay back when you pull it like it does factory. I've never seen a glick trigger come back forward after you pull it.
Heck yeah
This is a random question, but who made that giant 3D Glonk? I'm interested in getting one, and I can't seem to find him
Why is the second locking block pin missing
I bet you drive a 4runner don't you? A man who appreciates reliability with upgrades.
I'm building a full size PSA dagger. Will this work in it?
Do you plan to sell/ ship triggers to Europe?
What the best trigger for glock 43x mos
Badass
Atta boy!!
Will this work in a PSA Dagger compact?
Is Johnny alive? Where’s he been ?
Are these on website yet? I don’t see it.
What's the cost of this package deal.
My bet is it's the angle on I think you called it the bird head
On the trigger connector rod I bet it's less angle
Slick.
How you do that?!
can you make a g43 like that?
Nice
Are you selling the Glock performance triggers yet? All I’m seeing on the website is a Glock performance shoe. Thx bud!
Just the shoe and the connector option
So is the over reset on the performance version going to be fixed before releasing?
If there's a way to do it I'll do it I just have to make sure it's safe and functions
Why don’t you want the take down and reassembly shown?
👍👍
Meant, can't imagine it being better than your combat trigger
Is it damaging to a Glock, to load a round directly into the barrel, not using the magazine, and letting the slide drop on it?
Yes, although it is not an immediate effect. When you load from the mag, the rim of the cartridge slides under the extractor lip. When you force the extractor over the cartridge rim it causes undue stress and the extractor will fail prematurely.
So no bueno for G23? No .40 just 9mm????
Dude! Look'n good. Finish that fuck'n ceiling!
Has this trigger kid already been released?
What up Johny Glock. I just got sent here by range techus review we were talking about steyr aug triggers and he recommended me asking u to build me a steyr aug nato M1A3 drop in trigger. U name the price and ill pay. Real huge fan of triggertech diamonds i have them in every gun i own that starts with Ar. Dont know if u can make something to make it possible to drop one into a steyr aug or if u simply create your own mod to get rid of the mile long pull and 9lb pull. Anychance u can help me out just let me know what u need prior. Dont care if it takes a year im gonna have the gun forever so time isnt a worry if u have a million orders infront. But i would like to get inline if possible.
What trigger do recommend for a edc 43x
johnnyglocks.com/products/edc-trigger-kit