Wow! Great video. Going to start with one notch on the spring and go from there. Mine is only rubbing if I don’t catch the shoe perfectly. Great explanation.
I swear. You are so Savant like with this stuff. You are the one I can understand because as my wife would say. You overshare. But. You don’t, you teach us exactly what to do. With your triggers. With stock triggers. You to some over complicate with too much information. I think you give us exactly what we need to understand to do it ourselves. Thank you so much. It takes a brilliant man to teach and explain in a manner where literally everyone can understand.
That’s what’s so brilliant about him he doesn’t just know his stuff he knows how to explain it in a way that makes sense not a easy feat being a great teacher but he pulls it off
Another informative video and exactly what was happening with the hybrid trigger shoe on my G26 with your combat trigger, so much so that I switched it to my G43 and put the polymer back ob the 26. But now i know how to fit. As always thanks Johnny!
I got the hybrid trigger. The safety tab was a little irritating on the finger. I followed these instructions and removed two coils from the spring. Problem fixed, and safety tab is still functioning fine.
Hi Johnny, was looking thru your you tube articles and noticed they go back 7 years, how far can i go back in time and the article is still relevant to current technology, thanks
Thanks so much for your tx as your plane was leaving the runway. You are a dedicated individual. My Gen 2 Glock 19 with the full J Glock trigger and shoe put in by my buddy the gunsmith is working great. I guess I'm not fully aware of the crusiple movement. But after sending u the short vidio and hearing it is not a safety issue makes me feel great. Thanks JG. Mikey from Massachusetts. Heading to Brandon tomorrow for a few days.visit folks, both 90 yrs young. Must be the Florida life.
This video is a must watch. I had to cut the 2 coils for my G43x and worked like a champ. Did not have to for my G19 gen5 mos. Just order another set for my other G43x and G45Gen5mos. Can’t wait for these to land, JG triggers are the best with Glocks 3 safety’s still on em. JG4L. TRIGGER CONTROL IS CONTROL
Saw the video and have to say awesome vid but again to get some creep back i have to shave that part flat on the trigger bar? I kinda like having a single stage but I was just making sure thats what u were saying how to put some creep back in there.
I tried several flat face triggers for Glock. Apex. Overwatch. Nothing wrong with them. No issues with the safety tabs at all. I just dont like the flat shape for my Glocks. At all. My fave is a smooth billet Lone Wolf UAT which is the same profile as a stock Glock shoe. My AR15"s?? They must have flat shoe! I dont know why I dont like flat shoes on my hand guns.
NICE, Getting so DAMN hard in PA. to find places to shoot at longer ranges, HELL any range. So many rules also, here in PA. at the State Run Ranges, they hide in the bushes & if you do anything wrong " BAM THEY HAMMER YOU ". Like shooting more rounds then allowed, shooting to fast, not electing a range officer ect... then they run all your serial numbers, F'K THEM. I need more land to build my own FREAKING RANGE, IT'S KRAZY OUT THERE BROTHERS.
@@NoWr2Run damn dude that just takes the fun and relaxation out of shooting. I'm sorry to hear that man. I'm lucky to be where I am and have this big ass farm it was the best place in the world to grow up! Our range started off as lets make a stable shooting bench out of concrete. to, well might as well pour a slab too, if we're going thru all that we might as well cover it and if it's covers it won't be too much more to put sides on it. While tossing that idea. A buddy offered up (3) 4'x8'sliding widows that were cosmetic damage off a job site. well hell if we're doing all that better insulte it and use that old widow unit we have laying around, put up drywall but then it will echo so let's do a drop ceiling to soak up noise hahaha. So a concrete bench turned into a climate controlled (when you bring a generator) building on the edge of a field! I just got my 338 Lapua savage 110 elite precision last week and on our driveway we have a 1650 yard straight stretch before a curve and thick woods. I've set my goal to get good at shooting the length of the driveway! We recently got into reloading after talking about it for 15 years. I've always wanted to get into long range and finally decided now was the time.
I just order the JG Flat-face trigger shoe upgrade for $100 for my 43X this morning. With no other trigger upgrades just stocked Glock. Do I need to do any of this or can I just install it and everything is fine?
Tried this trigger. It is trigger shoe design flaw with too small safety tab. It is very uncomfortable, because it has small profile. It is not for sport shooting, because it requires very precise trigger finger placement to correct engagement. I think your skeletonized trigger shoe will work better although I did not tried it. At least you should send it to the guy.
@@johnnyglocks I ruined a housing almost putting a set screw, (not 400 or skinny enough) in the back to try takeout over travel, but I really just want to order a poly flat shoe with a good trigger safety in it, how much is it? And what doe's that one look like. Also do you sell trigger housing with or without your mods done to it, or lightend springs.....if say how much are they.......especially a good @JohnnyGlock trigger shoe that's poly.......?
@@ThePatriotParadox Go to his website he has those available, Just google Jonny Glocks and his website pops up at the top I don’t wanna add it here since UA-cam doesn’t want links to gun stuff in the comments I don’t want to get his channel in trouble
@@mikeyeyes7 thanks, I was asking which one of his shoe's because I heard him say he likes the polymer feel better, didn't know the name of the poly one, but I'll find it. Thanks again
Jus got the vex shoe for my 43x and I'm having this problem. The trigger safter isn't going down far enough and if I force it, it'll jus get stuck when I pull the trigger. Man.. it really really really is a shame u have to do these extra steps after spending 100 bucks on a shoe. Should really be a quick and easy process but rn this is a headache.
You don't HAVE to do them if you're purchasing the trigger properly with the pad of your finger and landing flat on it. The only time this becomes an issue is when people swipe from the side or go deep to their knuckle. There's just no way to disengage the trigger safety tab on a flat shoe without landing flat on it.
Wow! Great video. Going to start with one notch on the spring and go from there. Mine is only rubbing if I don’t catch the shoe perfectly. Great explanation.
I'm always blown away by how much there is to learn about these trigger systems. Interesting too is your preference on trigger shoe style and why.🇺🇲
I swear. You are so Savant like with this stuff. You are the one I can understand because as my wife would say. You overshare. But. You don’t, you teach us exactly what to do. With your triggers. With stock triggers. You to some over complicate with too much information. I think you give us exactly what we need to understand to do it ourselves. Thank you so much. It takes a brilliant man to teach and explain in a manner where literally everyone can understand.
Sorry about my typos
That’s what’s so brilliant about him he doesn’t just know his stuff he knows how to explain it in a way that makes sense not a easy feat being a great teacher but he pulls it off
@stevegriffith8925: When the student is ready, the teacher will appear.
Your the best man always helping out the community appreciate all your hard work
Another informative video and exactly what was happening with the hybrid trigger shoe on my G26 with your combat trigger, so much so that I switched it to my G43 and put the polymer back ob the 26. But now i know how to fit. As always thanks Johnny!
I got the hybrid trigger. The safety tab was a little irritating on the finger. I followed these instructions and removed two coils from the spring. Problem fixed, and safety tab is still functioning fine.
Hi Johnny, was looking thru your you tube articles and noticed they go back 7 years, how far can i go back in time and the article is still relevant to current technology, thanks
Love it! Thank you and keep up the great work.
Thank you so much sir, Love from Mumbai(india)
Great job again brother 👍👍👍👍👍✅✅✅✅✅
Thanks so much for your tx as your plane was leaving the runway. You are a dedicated individual. My Gen 2 Glock 19 with the full J Glock trigger and shoe put in by my buddy the gunsmith is working great. I guess I'm not fully aware of the crusiple movement. But after sending u the short vidio and hearing it is not a safety issue makes me feel great. Thanks JG. Mikey from Massachusetts. Heading to Brandon tomorrow for a few days.visit folks, both 90 yrs young. Must be the Florida life.
Great info. Thanks Johnny. I'm going to the website right now to check out that shoe
Dude this is sooooooo great. Thank you!!!
Great video! Johnny! I just sent email to you asking how to create that pre travel, thank you!
Use a soldering iron (not gun) and touch it(hold it for 10-15seconds) to the metal piece you want to de-Loctite. Not open flame.
Missed you last week... have a good vacation!
This video is a must watch. I had to cut the 2 coils for my G43x and worked like a champ. Did not have to for my G19 gen5 mos. Just order another set for my other G43x and G45Gen5mos. Can’t wait for these to land, JG triggers are the best with Glocks 3 safety’s still on em. JG4L.
TRIGGER CONTROL IS CONTROL
tnx for new video👍😎🤠 many are right what say,you teach us to much 😂 all best from serbia and your old friend BANCHY GLOCK👋🇷🇸
Thanks for another informative video. Quick question: What tool are you using to tighten the set screws in the trigger face?
Saw the video and have to say awesome vid but again to get some creep back i have to shave that part flat on the trigger bar? I kinda like having a single stage but I was just making sure thats what u were saying how to put some creep back in there.
Yes it adds pre travel not creep
Nice vid. That is my problem with my flafface trigger shoe.
slick vise I don’t think I’ve ever seen one like that
Once you have one YOU'LL WONDER HOW YOU DID WITH OUT ONE, LOL. Very nice for angle jobs on ALL KIND OF PARTS.
Love the videos
Good stuff.
Late but made it. Thank you!!!
What size is the over travel set screw?
I tried several flat face triggers for Glock. Apex. Overwatch. Nothing wrong with them. No issues with the safety tabs at all. I just dont like the flat shape for my Glocks. At all.
My fave is a smooth billet Lone Wolf UAT which is the same profile as a stock Glock shoe.
My AR15"s?? They must have flat shoe! I dont know why I dont like flat shoes on my hand guns.
Hey dude if you're driving to pa come over and do some long range Pew Pew with me on the farm I'm in Va about 40min east of 95. We have an 850yd range
NICE, Getting so DAMN hard in PA. to find places to shoot at longer ranges, HELL any range. So many rules also, here in PA. at the State Run Ranges, they hide in the bushes & if you do anything wrong " BAM THEY HAMMER YOU ". Like shooting more rounds then allowed, shooting to fast, not electing a range officer ect... then they run all your serial numbers, F'K THEM. I need more land to build my own FREAKING RANGE, IT'S KRAZY OUT THERE BROTHERS.
@@NoWr2Run damn dude that just takes the fun and relaxation out of shooting. I'm sorry to hear that man. I'm lucky to be where I am and have this big ass farm it was the best place in the world to grow up! Our range started off as lets make a stable shooting bench out of concrete. to, well might as well pour a slab too, if we're going thru all that we might as well cover it and if it's covers it won't be too much more to put sides on it. While tossing that idea. A buddy offered up (3) 4'x8'sliding widows that were cosmetic damage off a job site. well hell if we're doing all that better insulte it and use that old widow unit we have laying around, put up drywall but then it will echo so let's do a drop ceiling to soak up noise hahaha. So a concrete bench turned into a climate controlled (when you bring a generator) building on the edge of a field! I just got my 338 Lapua savage 110 elite precision last week and on our driveway we have a 1650 yard straight stretch before a curve and thick woods. I've set my goal to get good at shooting the length of the driveway! We recently got into reloading after talking about it for 15 years. I've always wanted to get into long range and finally decided now was the time.
@@alexduke5402 wow your setup is awesome where do you live where you have a big farm ? Midwest somewhere ?
@@mikeyeyes7 I'm 40min from Richmond Va
I just order the JG Flat-face trigger shoe upgrade for $100 for my 43X this morning. With no other trigger upgrades just stocked Glock. Do I need to do any of this or can I just install it and everything is fine?
I love apex it for a defense trigger it dosnt present any problems.
Tried this trigger. It is trigger shoe design flaw with too small safety tab. It is very uncomfortable, because it has small profile. It is not for sport shooting, because it requires very precise trigger finger placement to correct engagement. I think your skeletonized trigger shoe will work better although I did not tried it. At least you should send it to the guy.
What kind of vice do you use
Have a nice vacation
Do you still sell the polymer flat face trigger? I have your competition kit on one gun and would be interested…
I do not sell those anymore
Bruh that Johnny Glock flat trigger shoe 😍
I have the same problem with the p80 trigger kit. Safety shoe is hitting the polymer. Have you seen this problem with p80 triggers.
When you say the safety is hitting the polymer do you mean hitting the frame when pulling the trigger back?
TY for the video, it just answered a bunch of my questions. Now I don't have to bother you with more emails! :)
Is it the set screw in the front or the back of the shoe that takes out the pre travel, and which exact shoe do you like?
Front and the shoe I sell of course
@@johnnyglocks I ruined a housing almost putting a set screw, (not 400 or skinny enough) in the back to try takeout over travel, but I really just want to order a poly flat shoe with a good trigger safety in it, how much is it? And what doe's that one look like. Also do you sell trigger housing with or without your mods done to it, or lightend springs.....if say how much are they.......especially a good @JohnnyGlock trigger shoe that's poly.......?
@@ThePatriotParadox Go to his website he has those available, Just google Jonny Glocks and his website pops up at the top
I don’t wanna add it here since UA-cam doesn’t want links to gun stuff in the comments
I don’t want to get his channel in trouble
@@mikeyeyes7 thanks, I was asking which one of his shoe's because I heard him say he likes the polymer feel better, didn't know the name of the poly one, but I'll find it. Thanks again
have a good vacation!
I had issues using a Lone Wolf 3.5 connector with this shoe. I changed to OEM shoe and then all my issues resolved.
Jus got the vex shoe for my 43x and I'm having this problem. The trigger safter isn't going down far enough and if I force it, it'll jus get stuck when I pull the trigger. Man.. it really really really is a shame u have to do these extra steps after spending 100 bucks on a shoe. Should really be a quick and easy process but rn this is a headache.
You don't HAVE to do them if you're purchasing the trigger properly with the pad of your finger and landing flat on it. The only time this becomes an issue is when people swipe from the side or go deep to their knuckle. There's just no way to disengage the trigger safety tab on a flat shoe without landing flat on it.
The Glock University
I just installed the suarez flat face trigger on my glock 27, was tired of my finger being pinched but works great
How do I stop pin creep. On my glock.
Fingernail polish
@@johnnyglocks Thanks brother.
You look like Johnny Knoxville
email said to view hearted comment, but there was none
Yo Johnnnnnnyyyy!
OH YeaH!