The 2002 L59’s have DBW also. They are the ones that come in the Suburban/Tahoe/Yukon’s. Basically the 2002 SUV’s have DBW, but they have the different style DBW throttle body that is identical to the one on the LS1 Corvette just made opposite.
I have an L59 in my 2005 Yukon. I looked and it seems to have the Flex Fuel injector rails, as you mention in your video. However, I only run NON-Ethanol fuel. Is this going to cause me any issues down the road? I've been doing this for 5+ years and have had no issues so far. I do get 3-4 more miles per gallon than I do with Flex Fuel, and tones more pulling power, and I took the intake off and have the cleanest intake and valves I've ever seen in a 19-year-old engine with 143,000 miles. I run some BG 44K in the tank once a year on 1000+ mile drives and I guess that helps keep it clean.
can you turn a 2002 lm7 into a L59 though? I have collapsed rod in a 2004 L59 and have access to a 2002 lm7 block . Can the the LM7 run flex with upper swapped?
@@EricDenton-ky2cb Thanks for the reply, I went ahead and purchased it. Tore it down and replaced as many gaskets and oil ring/oil pump, cleaned it up, etc. Now I have mated in. Upper intake and remaining parts going back on soon with the flex setup.
![АЛАУДИНОВ у Скабеевой: эти их ВСУ нас НЕ ДОГОНЯТ 😁 [Пародия]](http://i.ytimg.com/vi/an0anqU4WGQ/mqdefault.jpg)
FULL VIDEO Abandoned Avalanche Will It Run?: ua-cam.com/video/JfOSgJD6Brw/v-deo.html
The 2002 L59’s have DBW also. They are the ones that come in the Suburban/Tahoe/Yukon’s. Basically the 2002 SUV’s have DBW, but they have the different style DBW throttle body that is identical to the one on the LS1 Corvette just made opposite.
Thanks for the info. Good to know. So many different details between the years.
If you're doing a project build you're going to want that FBW throttle
Once again you know your stuff👏👏👏
Thank you sir!
I have an L59 in my 2005 Yukon. I looked and it seems to have the Flex Fuel injector rails, as you mention in your video. However, I only run NON-Ethanol fuel. Is this going to cause me any issues down the road?
I've been doing this for 5+ years and have had no issues so far. I do get 3-4 more miles per gallon than I do with Flex Fuel, and tones more pulling power, and I took the intake off and have the cleanest intake and valves I've ever seen in a 19-year-old engine with 143,000 miles. I run some BG 44K in the tank once a year on 1000+ mile drives and I guess that helps keep it clean.
That's one Smart mechanic! Very interesting! 👍🏼👍🏼💯💯
Thanks 👍
can you turn a 2002 lm7 into a L59 though? I have collapsed rod in a 2004 L59 and have access to a 2002 lm7 block . Can the the LM7 run flex with upper swapped?
Yes of course I put a 04 4.8 in my 02 1500 it was literally plug and play
@@EricDenton-ky2cb Thanks for the reply, I went ahead and purchased it. Tore it down and replaced as many gaskets and oil ring/oil pump, cleaned it up, etc. Now I have mated in. Upper intake and remaining parts going back on soon with the flex setup.
Hey Matt I need help with bypassing my oil injection boat motor can you help Evinrude TE60TLEIB do you have a email???
Most guys just pre-mix 50:1.