Gear Shifter Locked in Park, Won't Go Into Drive Even with Brake Depressed - 2002-2008 Trailblazer
Вставка
- Опубліковано 31 лип 2024
- SAFETY FIRST: MAKE SURE THE VEHICLE IS STABILIZED BEFORE STARTING ANY MECHANICAL WORK- ESPECIALLY ON ANY SHIFTER ISSUES!
On this video you will see the two "NO-TOOL quick fixes" that may work for your car!
1- Check the BTSI fuse (#25 in the fuse box) BTSI means Brake Transmission Shift Interlock which is a safety mechanism to prevent the Transmission from going into gear without the brake being depressed. A blown fuse there will keep the gear shifter from unlocking from the park position.
2- Apply some spray lubricant to the linkage at the base of the shifter lever (under the shifter boot). This may help the linkages to operate more smoothly.
Other Helpful Videos for "Stuck in Park" Shifter Problems:
"Hack to Over-Ride the BTSI Shifter Interlock" - • Locked Shifter? How To...
"Three Common Shifter Issues" - • Three Common Transmiss...
Thanks, Please Subscribe! - Авто та транспорт
Great video. You are like that awesomely cool neighbor that everyone goes to when they have a car issue.
Thanks 👍
Very informative video. Thank you for sharing your knowledge with others! This video was extremely helpful!
Glad it was helpful!
Excellent video wonderful explanation thanks
Thanks!
The lube in the groove has my locked up button working smooth as butter now! Thank you!!!
Great to hear! Thanks for Watching!
Thank you for this video! I wish my auto expert dad was still around 💔😢
My husband passed almost 2 years ago so I'm a solo gal having to figure out these things and I don't know what I would do without YT and all you car experts🙏 to come to my aid. I have a great mechanic but he's not close by where I live and in SoCal, we really need reliable mechanics!!
So, thank you CubManCan ☺️ and I subcribed and will be learning even more! if I may add, I learned recently that lubricant vs. WD-40: when it's lubricant needed, it makes a huge difference in the long run! Much smoother because of the silicone where WD-40 is more of a solvent, by comparison - I keep both on hand and I learned from another YT channel that the lubricant works better, longer where lubrication is concerned...I made the mistake of putting WD-40 on the track of vertical blinds; now they're stiff and don't move back and forth easily which was my original intention. I wish I'd known that lubricant "hack" sooner so now I have to start over... Anyway, I just wanted to throw that out there. Thanks again for everything and will be watching and learning from all your videos. 🙏💗
Thanks for Watching! Great Points Made! Often WD40 is good for cleaning and loosening, but in most cases a lubricant should be used later if WD40 is used first. Thanks for that good info!
The WD-40 trick worked perfectly! Thank you so much.
Glad it helped!
Fantastic videos. Watched 2 of your videos on the BTSI bypass (drilling hole to manually reset the solenoid - you did two- and now this one. I've watched a lot of car repairs videos and done a lot of repairs (some major), your technique is most enjoyable and informative. Please keep up the excellent work. If it's not too much to ask, will you please buy a 2000 Jeep Grand Cherokee and do some videos. I have one of those and I could use your help. 😁 Bill
Thanks for Watching and the Nice Comments. I enjoy doing these videos. Thanks for the idea on the Cherokees! I've owned two of those in the past. Will see what I can do. Any particular areas of concern on the Cherokee? Thanks Again!
my 2007 trailblazer has no 12 volts at #25 fuse , were does fuse #25 get it power from thanks
Buen consejo gracias
Muchas gracias!
Great videos. Sure save my butt a few bucks. Thanks for sharing your knowledge.
Glad to help! Thanks for watching!
I guess it is kinda off topic but do anybody know of a good website to stream new movies online?
The wire under the shift boot goes to your Traction control system and not to the shifter. The activate trac control is the little button under the silver knob on your shifter.
My 03 Trailblazer wire under the shift boot goes to my shifter. The activate overdrive is the little button under the silver
knob on my shifter.
@@cathycurry6730 mines 06 LS and has traction control.
Ours is stuck in reverse will not move or start. Said it jumped in reverse.
HEY GUYS,
REMEMBER! SAFETY FIRST: MAKE SURE THE VEHICLE IS STABILIZED BEFORE STARTING ANY MECHANICAL WORK- ESPECIALLY ON ANY SHIFTER ISSUES!
I received a very good Question, So I reposted it here - Let me know if it helps, or needs more explanation - Thanks for Watching!
QUESTION:
What if your car is stuck on reverse, sorry for the late comment my car won’t start and it’s stuck on reverse, got any advice appreciate it
ANSWER:
Thanks for the Comment! SAFETY FIRST: MAKE SURE THE VEHICLE IS STABILIZED BEFORE STARTING ANY MECHANICAL WORK- ESPECIALLY ON ANY SHIFTER ISSUES!
It sounds like the shifter cable is not operating correctly to get the transmission into PARK or NEUTRAL so the starter will engage. This can happen if there is damage to the cable or the backets that hold it in place, or the grommets at the attachment point at the end of the cable where it meets the transmission. The grommets are not real difficult to replace (about $10 at AutoZone), but be very careful to lock your wheels with the parking brakes and use wheel chocks safely, and if you have to raise the car up, use good jacks and jack stands and use them properly. If you need more info, please post a new comment (not a reply) so it is easier to notice and reply to. Thanks Again - Good Question!
SAFETY WARNING! BE VERY CAREFUL WHEN WORKING ON ANY GEAR SHIFTER ISSUES! MAKE SURE THE VEHICLE CANNOT ROLL BY LOCKING THE PARKING BRAKE AND USING CHOCKS ON THE WHEELS - AT A MINIMUM THE REAR WHEELS SHOULD BE PROPERLY CHOCKED BUT ALL 4 WHEELS CHOCKED IS BEST. WORKING ON A LEVEL PARKING SURFACE IS ALSO CRITICAL!
You may need the assistance of a mechanic trained and experienced with this type of vehicle as It sounds like you could have more than one issue. That said, a shifter mechanism out of sync with the actual transmission can cause a lot of problems due to the signals the vehicle's on board computer is recieving and sending. The key switch will only crank the engine over if the actual transmission itself is in the park or neutral position (a malfunctioning shifter or cable mechanism may cause a difference in the shifter position and the actual transmission position.) I would begin by inspecting the shifter related linkages and mechanisms (ALWAYS STABILIZE THE VEHICLE FIRST). You may have a bad shifter cable issue or - possibly the cheapest to fix and most likely- only the grommet at the end of the cable may be worn/bad/disconnected. You also could have a BTSI issue keeping the shifter locked up, but that is less likely. There are steps on other videos that explain those issues. A first-step easy, cheap fix for that may be to pull the shifter lever boot up and try a bit of WD40 at the points shown in the video. As a diagnostic measure you could drill a hole in the side of the console in the right position (shown on the BTSI video) to manually release the BTSI lock -BUT BE CAREFUL TO ENSURE THE VEHICLE CAN'T ROLL IF YOU MANUALLY OPERATE THE BTSI SOLENOID!
AGAIN: WARNING! MAKE SURE THE VEHICLE IS STABILIZED AS WORKING ON ANY SHIFT RELATED PART MAY PULL THE TRANSMISSION OUT OF THE PARK POSITION! USE PARKING BRAKES AND WHEEL CHOCKS ON LEVEL GROUND! Most of all, be very careful, get professional help if you need it - Thanks for Watching!
What if your car is stuck on reverse, sorry for the late comment my car won’t start and it’s stuck on reverse, got any advice appreciate it
@@cristianvalle9006 Thanks for the Comment! SAFETY FIRST: MAKE SURE THE VEHICLE IS STABILIZED BEFORE STARTING ANY MECHANICAL WORK- ESPECIALLY ON ANY SHIFTER ISSUES!
It sounds like the shifter cable is not operating correctly to get the transmission into PARK or NEUTRAL so the starter will engage. This can happen if there is damage to the cable or the backets that hold it in place, or the grommets at the attachment point at the end of the cable where it meets the transmission. The grommets are not real difficult to replace (about $10 at AutoZone), but be very careful to lock your wheels with the brakes and use wheel chocks safely, and if you have to raise the car up, use good jacks and jack stands and use them properly. If you need more info, please post a new comment (not a reply) so it is easier to notice and reply to. Thanks Again - Good Question!
Came here because had the same issue. Skip all that and give the top of shifter a couple wacks with a hairbrush and problem solved. Wack it nicely no hard wacks!! Lol
LOL! Didn't have a hairbrush in the toolbox! Thanks for watching!
I think your brake switch is corroded and you jsut got lucky on it going back in to gear :)
Thanks for sharing, but in this case the brake switch was fine.
0
There were several virtually identical vehicles made by GM for sale by Chevrolet, Buick, Isuzu, GM, and possibly others...Saab Maybe? The shifter mechanisms (and probably 99.9% of all other parts) are the same on all those modeled in the Trailblazer mode. Thanks for watching!