iCarsoft on Range Rover L322 Air Suspension Inactive Fault Fix - Episode #2
Вставка
- Опубліковано 3 жов 2024
- / @grooveon #rangerover #diagnostictroublecode #diagnosis
Previous Episode #1
• iCarsoft on Range Rove...
Episode #2:
If you have a warning of 'Air Susp - Inactive' on your Range Rover L322 and you cannot clear it by turning steering wheel from lock to lock, I go deeper into the diagnostic with iCarsoft to understand what other items are linked and can cause the fault, ABS, and Steering Angle Sensor.
Episode #3: Coming up...
If you cannot clear the fault with iCarsoft or diagnostics, then its likely you have a hardware issue, in the next episode I investigate further and perform a full strip down of the compressor to replace the piston ring.
Thanks for supporting my work and consider subscribing for further episodes !
Multicar iCarsoft version can be bought here: amzn.to/3r1ZxAk
Range Rover / Jaguar iCarsoft version here: amzn.to/3LJe5yv
iCarsoft CR Max pro version here: amzn.to/3fcDg02
Amazon GrooveOn Store: www.amazon.co....
I am proud to be accepted into the Amazon Affiliate programme and now have a dedicated on line store with all my products in one place! I get a little bit of commission if you use my page so thank you in advance for being amazingly kind in supporting my channel ! :) / @grooveon I really hope my content helped you, 'Super Thanks' is available by clicking the button under the video thanks so much ! ❤️
Alternatively, you can just buy me a ''thankyou'' coffee!: ko-fi.com/groo...
Thank you, this one was a big help
hi there I hope you get the issue sorted, the fix for me was on the following video in the series, it was down to the steering angle sensor
Very good video - I’ll be doing this tomorrow when my scanner arrives! Great work 🙏🙏🙏👏🏼👏🏼
Did this problem come back or did this solve the issue permanently?
@@slavicvip no, problem is fixed and stayed away, thanks if you subscribed to me ! good luck on your fix mate
Ahhh! The joy of owning a car full of electronics, you are lucky that your spare wheel lift did not break, my new one broke at the attachment before it even started to lift the wheel, "Made in Germany" it said on the broken plastic bit! Many thanks for posting this investigation. Chris B.
That must have been a struggle to lift!
@@GrooveOn Yes it was very heavy, there is another type of "crane" which lifts directly upwards, it attaches to the top of the roof gutter I think, but after breaking my new lift I re made the thin plastic German made ones with stainless steel, in the same design, but just using a proper material, it all work fine now, quite ingenious how it lifts the wheel onto the lower tailgate.Chris B.
This is very insightful
No it does not need replacing you are over working the compressor it is over heating that is all great job 👍.
Well he makes it look so easy finding everything spot on! In reallity its a bit more involved! lots of sub-menues and small glitches along the way! I bought it for two of the most common issues with the LR3, the Air-suspension and EPB! neither of these could be found in the Diagnostics menue??? or did I miss something? make sure you are very, very well orientated with all menues, sub-menues, buttons and commands before trying anything cause if you make a mistake it can be a daunting task trying to rectify the error!....There is a tool called, IID-tool, this is a top professional tool for three times the price and if I cant find the Air-suspension, EBP, etc I guess thats the obvious choice!
The air suspension is linked with others systems, the issue I found was because of steering angle sensor in next episode.ua-cam.com/video/6Y18Ku4f1KE/v-deo.html,
Also this video shows another fix. ua-cam.com/video/y16dPBTGtqs/v-deo.html
Well worked out and very interesting too,
Glad you enjoyed it
A hard to find kind of video: A very well made Video, systematic and to the point. By the way, any source when checking error codes for specific car model/year? Range Rover Vogue 2008, Diesel V8. L322. Thanks!!
Thank you Felix, very kind. So when you use icarsoft you choose your car model/year, and it will then talk to the ECU with the relevant systems that can be checked
Really great video.. tks very helpful !
Thanks Man , so long as a videos help people then that makes my day, I'm only a small UA-camr but it gives me great satisfaction!
Hey Groove On, I've tried everything that you did in your video, torn apart the trunk, lifted out the spare, and cleaned the connection...still getting a Can Bus fault for Air Suspension. What should I check next, even replaced the whole air suspension pump! Lord, I could have used that money for something else, but the mechanic was too hasty. Help! Love your channel, insights and all things Range Rover
hello my friend, did you check my other video in Episode 4? would be good if you subscribed ! this is the one that I actually found the cause of the fault. It was the steering angle sensor that is linked somehow to the air suspension. ua-cam.com/video/6Y18Ku4f1KE/v-deo.html
What do you guys make of this:
Transmission safety program
Also transfer case neutral
And air suspension inactive.
The first two come up a lot and the it suspension inactive came up once.
Nice watch
Thanks for that! and if you subscribed!
When you say the seal, do you mean the seal on the long tank underneath the car or on the compressor itself, because one of the faults on my air suspension says compressor temp static when filling. I've got can bus fault on my icarsoft so I'm going to try the disconnect on the compressor connection see if that works. I'm impressed with your video btw thanks for showing it in detail.
Hi There, the seal is in the compressor itself, under spare wheel. If you watch the next episodes 3 and 4 I show you exactly what you need to do. Thanks for the kind words and if you subscribed !
ua-cam.com/video/jB02LsBX8r0/v-deo.html
ua-cam.com/video/6Y18Ku4f1KE/v-deo.html
Hi! can this icarsoft lr 3, do a battery reset?? I have noticed that quite a bit of problems have emerged after installing a new and more powerful Battery!..cheers!
The icarsoft has a battery management, this is to let the car know its a new battery, rather than reset as you said.
I've just ordered an icarsoft 3.0 based on your videos for my L320 2010 and the reviews on amazon are worryingly terrible. Have you used SDD? Any comparison? 😊
I know that the customer service is not great on icarsoft and is why I do the videos to help, but I have fond the diagnostic brilliant. I also use Maxicom by Autel.
Hi pal I know this is unconnected to the vid but I recently had a flat battery, I took it off to charge it and when I put it back on it cranks over fine but there no power to the fuel pump IE no audible noise. I'm suspecting the inertia switch has tripped as the 25a fuel pump fuse is intact and not blown. I'm trying to locate the inertia switch under the bonnet I believe it's behind the left hand firewall, some videos on yt show it behind the plastic trim in the front passenger footwell but there is no visible marking in the plastic moulding to show it's location. Wondered if you could shed some light on it's location plus.
thats odd, have you checked the fuel pump relay is okay, I believe is in the rear fuse box
Please advise had new compressor fitted plus relay and car feels solid over bumps
hmm, it sounds like you are in access mode on the suspension=, is it sitting low? can you raise the suspension to the three positions?
@@GrooveOn yes can raise and lower to all
Hi where did you purchase your icarsoft, i see on your video it's a v2, problem i have is I'm trying to get one here in Australia we do have dealers here but they tell me they are only good for l322 from 2006 on . Me being English (a Geordie)i love landrovers and always will even though my l322 is sending me up the wall ha ha, please let me know where you bought it
Hi there, I got my icarsoft on Amazon, here are the details, Range Rover / Jaguar iCarsoft version here: amzn.to/3LJe5yv
Thank you so much
I have 2006 land rover ranger rover my suspension code fault max 30 m mph
@@josebenitez8678 that's the standard message when you are in low or high position, it should automatically go to normal height above 30mph
@@GrooveOn fron suspension low
Icarsoft, I have it but it doesn't have range rover suspension software
Is your icarsoft range rover specific mate. If so what range rover model do you have? Make sure you select the specific model. 👍
My icarcril
Good on you, you got a Brain your thought process is spot on , I have a LAUNCH X-431 PRO its good but you have to pay for updating every 4yrs, so I was thinking of getting a icarsoft maxi pro version V3 ?
Really appreciate the kind words thanks! If you get the V3 see if there is one that can do multi cars👍
@@GrooveOn cheers i might do that or get top range that can Program in Modules Injectors air Compressor ie Hitachi to AMK Type and calibrate Air Suspension ect , I Recommend you see DiagnoseDan on UA-cam a Duch guy with a good Brain 🧠 😀
@@paulthompson7280 thanks Paul, I will check diagnostic Dan out. I am looking at also getting a Maxicom 808 tool