can you provide a direct sunlight example.. I have wasted hundreds on Bafang displays (that say they are TFT) but you can't see them at all unless the day is really overcase
My bike has this display unit and Bafang ultra motor. I never get a reading of 100% battery reading, only ever get 96% and 54.2 volts. When the battery reaches 47 volts I get about 10% range reading remaining, although the battery cut out voltage is 41 volts. So after about another couple of miles the range reading would be down to zero, while the battery would be still having quite a high voltage. Would the 0% range reading mean that the motor cuts out? So I'm a bit wary of travelling too far in case I'm left high and dry while being miles from home!
ive read somewere you can plug a Bluetooh special Dongle in the usb at bottom of screen and use a simple app too adjust settings on motor,, theres UA-cam tutorial vids on doing it with motor,,
Quick and informative video
can you provide a direct sunlight example.. I have wasted hundreds on Bafang displays (that say they are TFT) but you can't see them at all unless the day is really overcase
How are the settings different from the Bafang C961 display ? What does the Bafang Ultra have that the Bafang C961 doesn't ?
if i unlock the speed limit on my bafang ultra and raise it to 40 mph with the throttle assist over 20 mph or is the throttle limited to 20 mph?
Are the Bafang Ultra displays compatible with Hub Motors or Mid Drive Motors as opposed to sensors?
yes they are I have one on my specter S by enorau
So, I can get the Bafang Ultra setup for my 750W Motor.
What is the difference between Dpc18 and Dpc 181?
what is the max speed setting ___???????
How do i reset the battery?
Hello i wash my bafang electrique bike and it goes off it is only on when it is connected to a charger and get off when disconnected can someone help?
Can you make one of these for the Vista Cruiser?
My bike has this display unit and Bafang ultra motor. I never get a reading of 100% battery reading, only ever get 96% and 54.2 volts. When the battery reaches 47 volts I get about 10% range reading remaining, although the battery cut out voltage is 41 volts. So after about another couple of miles the range reading would be down to zero, while the battery would be still having quite a high voltage. Would the 0% range reading mean that the motor cuts out? So I'm a bit wary of travelling too far in case I'm left high and dry while being miles from home!
ive read somewere you can plug a Bluetooh special Dongle in the usb at bottom of screen and use a simple app too adjust settings on motor,, theres UA-cam tutorial vids on doing it with motor,,
difference between 850c and cpc 18 please ?????
The DPC18 uses a complete Bafang system and it is programmed to work with the FT1000MD.
@@cscmotorcycles2297 what is the max speed of both ?
Hi, if I change the exhaust at the SG250 is there anything that should I adjust at the Carburetor or is it ok regardless?
Normally when you change the exhaust you might need to re-jet the carb. CSC sells a jet kit, give us a call.
I forgot my password :(