Big 3D Printer for Big Projects Creality CR M4
Вставка
- Опубліковано 10 вер 2024
- Today, we will see the projects I have made with the Creality CR-M4, the large printer of the projects, with a printing area of 45x45x*47cm, enjoy watching.
creality
www.creality.com/
Craft Channel
/ @craftchannelyt
Junior Builders
/ @juniorbuilders
This video was dubbed by HEYGEN
www.heygen.com/
/ @heygen_official
So what do you think about these projects and CR-M4?
0.8mm nozzle and burning off strands with a lighter? this has been my workflow since 2019 as well, works like a charm. great video
Thank you so much 🙏Yes, lighting it with a lighter is very useful. A small blowtorch can also be used.
I’m the first viewer and first comment 👍, this is an excellent video
Small note: use timestamps
I second that lol
@@abshb I will take your suggestion into consideration
@@abshb Thank you very much 🙏
Ther is the Elegoo Neptune 4 Max at 420x420x480 running Klipper with higher print speeds . I have both the Neptune 4 Plus and Max. Also you have the Comgrow T500 with a 500x500x500mm build volume.
Thank you for sharing your knowledge. I think it is a disadvantage that Neptune 4 Max performs XY axis movements on wheels. Has this been a problem for you? I just learned about Comogrow T500. This printer looks nice. It's nice that they use linear rails on all axes. Also running on klipper.
The Neptune 4 max has been the most frustrating printer I have had the displeasure of using. And, i own3 other printers.
@@dilligafTV1 Thank you for sharing your experience. I am asking for information, what were the features that did not please you?
@@3DPrintLab1 well. I’m pretty sure I got a dud. I actually liked the features it had. After I set it up, it would not print at all without a firmware update. It would just beep when it got to the front of the print bed and stop before it did its test line. Then, it did print out the little boat so I thought all was well. So I sent a large print of Wolverine mask to it. No matter where I put that model in the slicer on the build late, the printer would grind the belt when it would move the bed forward and squirt filament off the back of the plate. I tried two different slicers.i gave up and packed it up and sent it back to Amazon. I’m thinking of giving the big anycubic a try. I want something to he able to print that volume.
@@dilligafTV1 Thanks for sharing your experience. I wanted to know about this since it is a similar printer and many people ask about the Neptune 4 Plus and Max.
Creality Ender3 V3 KE 3D Printer Review videosu ile kıyaslama yapıyorum da ağız hareketleri bunda inanılmaz belli oluyor ve aşırı bir yapaylık katıyor 2 video arasında farklı bi program mı kullandınız yoksa kamera açısından dolayı mı ai pek becerememiş ?
Aslında aynı programı kullandım. Tabi sürekli üzerinde yeni çalışmalar ve güncellemeler yapılıyor malum her güncelleme iyi sonuç vermeyebiliyor. Siz söyleyince ben de iki video arasındaki farka baktım ama fikirlerimiz ayrı. KE videosunda ağızı çok açarak konuşturduğunu düşünüyorum :D Sanki onu biraz azaltmışlar gibi. Şimdilik bu konuda en iyisi Heygen ama ai hızla gelişiyor yakın zamanda daha iyi çözümlerde çıkabilir.
Are you related to General Zod?
Yes, we are relatives. We haven't seen each other for a long time. It's a family matter. 😏