1994 Club Car DS, Gas - It Just Stopped and Won't Start!
Вставка
- Опубліковано 24 лип 2024
- Welcome to Kevin's Golf Carts UA-cam channel! We make how-to's, repair and vlog-style videos. Ocasionally, we will have a live stream to answer your questions.
My Site - www.kevinsgolfcarts.com
Affiliate Links: I earn a small commission when you use the links below. These links help support my channel without added cost.
Amazon Store - www.amazon.com/shop/kevinsgol...
Kofi - ko-fi.com/kevinsgolfcarts
PayPal - www.paypal.me/theburns/5
Mattress Insider - goo.gl/rhQLMj
TubeBuddy - bit.ly/2okVnXe
Square - squareup.com/i/KEVINSGOLF
Amazon Links:
Cat LED Flashlight: amzn.to/3s6exNI
DEWALT Grease Gun: amzn.to/3J10osa
DEWALT Goggles: amzn.to/3HnE6Ap
Nitrile Gloves: amzn.to/3ojvuTX
Welding Gloves: amzn.to/3gkguAA
Dremel Rotary Tool: amzn.to/32RlzgE
Gummout Carb Cleaner: amzn.to/3uhkkTn
Compression Tester: amzn.to/35DjMNb
Milwaukee 1/2" Drive Impact: amzn.to/3L1SuAB
Milwaukee M18 Batteries: amzn.to/3gh4NKS
Milwaukee M12 3/8" Ratchet: amzn.to/3AS0jnI
Milwaukee M12 12-Volt Battery: amzn.to/3olztPD
Milwaukee M12 Rivet Tool: amzn.to/3ARdEwz
Mr. Funnel AF3CB Fuel Filter: amzn.to/35EGmVH
Neiko Impact Socket Set: amzn.to/3L529Gi
Neiko LED Work Light: amzn.to/3IZ1g0h
The Ear Buddy Ear Plugs: amzn.to/3scQwVd
Tek Motion Ultrasonic Cleaner: amzn.to/34gSHz3
Voltec LED Light: amzn.to/3rlCFwv
Other Links:
Husky 30 Gallon Air Compressor - go.magik.ly/ml/kqd6/
Camera Gear:
GoPro HERO 10: amzn.to/3okKEbA
ProGrade Digital SD Card: amzn.to/3KZK9NL
ProGrade Digital SD Card Reader: amzn.to/34ig4Iu
JOBY GorillaPod Tripod & Ballhead: amzn.to/3J29Aw2
Manfrotto 496RC2 Ball Head: amzn.to/3HnYUaY
Panasonic Lumix 12-60mm Lens: amzn.to/3GmJTow
Panasonic Lumix 14-140mm Lens: amzn.to/3rmcFBa
Panasonic Lumix GH4: amzn.to/3KYJThQ
Panasonic Lumix GH5: amzn.to/3HrtHDB
Ravelli AVTP Tripod: amzn.to/3Hr3CES
Pixel Wireless Lavalier: amzn.to/3GpQBtE
15lbs Sandbag: amzn.to/3AVrGx3
CRAPHY Softbox: amzn.to/3oo87bF
Disclaimer:
Kevin's Golf Carts cannot guarantee against unauthorized modifications or improper use of this information. Kevin's Golf Carts assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Kevin's Golf Carts recommends safe practices when working with all tools, chemicals, lubricants, or any other tools or equipment seen or implied in this video. No information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Kevin's Golf Carts. If you are uncomfortable with replicating the actions used in this video, seek the service of a qualified professional. - Авто та транспорт
I’ve done several at this point. Your page has been invaluable to me several times. I found a local place that rebuilds oem start/generators for 125$. Bearings brushes and truing commutators etc. Fun fact, ‘95 Yamaha start generators are integrally mounted with the front motor mount. Not a whole lot of fun in the heat while solo. Again thanks for your content. Helped me out in my golf cart community.
I'm getting a 92 Club Car DS next week and prepping thanks to your videos. It does run and the owner says it's a coil he may have installed that was the wrong model. Only Coil i see is the ignition coil so hopefully he can point at what he did. Thanks for your videos. Immensely helpful as I have no mechanic background and would be diving into this blind.
Patience is a virtue. Easier said than done dumb.
Thanks Kevin great video, even though I've done these jobs before at the club I always pick up a new technique from you, like using the fork to tension the belt, that's a great idea! Thanks again!
I use the pickle fork because its conveniently placed and it fits, lol. You could use a small flat pry bar or large flat blade screw driver.
I like the pickle fork idea! It's always hard to find a good angle to pry up if you go in above the exhaust.
I had a similar problem. First press the pedal and make sure you have 12 VDC on the stud with the white wire. this will check for a bad connection due to copper corrosion in the cable brad
Kevin i have a 2006 club car precedent gas. It won’t run unless choke it. I can choke it and it takes off and runs ok. Then i can release the choke. But if i stop i have to choke it every time. I’ve cleaned the fuel tank, added new filter, new spark plug, and new fuel pump. The tank was dirty. It is overall running better.
good video ,thank you .
Hey Kevin, what would cause the fuse to keep popping. If I put a wire from the battery ground to the generator motor the cart works fine but don't have a fuse. The battery doesn't go dead either with a wire hooked with out the fuse. It is a yamaha g16 gas
I wish you would do an engine swap like a Vegas cart kit love this channel
I thought about doing an engine swap video, but I really don't have much interest in doing so right now. With the cost of everything at the moment, it's not really feasible for me to invest in something for myself. Maybe in the future though.
@@Kevinsgolfcarts I love how thorough you were on this job a lot of mechanics would have quit with just the starter repaired I'd love to see you do a hot rod golf cart this winter thanks again for your video
I had a cart same year and model last Thursday 1/2 mile ride away blew spring set straight out of the Start Gen.
was a customers part brought to me. cheap knock off. that was " rebuilt ".
I won’t touch Amazon start/generators. I’ve gone round and around with those pieces of s&@t.
I won't install parts provided by customers. It has to be my parts or I won't work on it. I've had too many problems in the past so I no longer will make exceptions. This gives me control over the source and warranty.
@@Kevinsgolfcarts I’ve had the pleasure of fixing a formerly reputable repair shops stuff. They were charging people oem like prices for Amazon parts. They failed, naturally. Word got around that I wrench. It’s kept me a bit busy. It’s sometimes hard to explain to folks that I won’t put cheap parts on their cart. Folks just look at Amazon and don’t understand that you get what you pay for. I also don’t do this for money, it’s just something to do when I get done with the day job.
Seems I'm getting more and more new customers for Clubcars 95- 2008. Oil leaks at crank case near dip stick. Blown head gaskets. Screwed up wiring. Electric carts all day.
Hey Kevin, what was the voltage prior to thinking it was the voltage regulator? I could not make out what you said over the noise of the motor. I suspect it was over 15v.
It climbed to over 16 volts.
Hey Kevin, how tight do you recommend the starter generator belt be?
Typically tight enough to have about a 1/2 inch of deflection.
Hey Kevin. Love the videos. I have a 2002 ergo txt. Do you know what the voltage output should be for the stater / generator at the battery?
It should be around 14-14.5 volts. Anything over 15 volts or under 13 means the voltage regulator and/or starter/generator is bad. To test the starter/generator, connect the DF terminal from the starter/generator to the Negative side of the battery, the voltage should rise rapidly. You must monitor the voltage at the battery when you do this and not longer than 30 seconds.
@@Kevinsgolfcarts Thank You. I will give that a try.
Hey Kevin, can you elaborate what Yamaha has done to "cheapen" their carts? I know you prefer the CC but honestly, I can't buy a cart with a Kohler. I've just had too many bad experiences with Kohler motors in the last 10 years. Now, if they still had the Kawasaki motors, ok. But we know that will never happen again and, hopefully, they don't go back to Subaru motors. Our course has a few of those and what a pain mostly to get parts. We want to stay with gas carts.
This could be a video all on its own. Starting with the G29/Drive, they started making the floor pan out of plastic. Its even weaker on the new Drive2. Its hard to strap them down on the trailer because they flex so much. These newer ones with the QuieTech crap are overengineered plastic junk. They have a nice transaxle with independent suspension. I think that's a bit much for a 800lb golf cart. They've added so much plastic junk to cover up and dampen sound, it makes it so much harder and longer to do regular service. I agree with the Club Car and the Kohler engines. Kohler needs to stick to making toilets.
@@Kevinsgolfcarts LOL!! "Kohler needs to stick to making toilets". That's a classic, Kevin.
Thanks for the reply. I've had other Yamaha products and they have all performed well but, of course, I am commenting primarily about their motors. I think they make good motors. I definitely want another gas cart so I am in a bit of a pickle. I like the CC frame but cannot purchase a Kohler. I have never been an EZGO fan and pretty much thought of them as a "second tier" cart. That kind of narrows it down to Yamaha...........and, I guess Cushman. There again, Cushman has never been on my radar and I don't know much about them. Dealer network seems small and wonder about part availability.
Maybe I should just keep my old CC DS with the Kawasaki FE290. Have always done my own maintenance and repairs on this old gal. It has been a great cart. I just kind of wanted a newer unit with higher gears.
From what I've seen, Cushmans are rebadged EZGOs. I don't know if that's the case, but all of the parts are interchangeable. The older Yamahas are decent carts. Everything from the G22 and down are very easy to work on. The G29/Drive is the same, but the plastic floor pan and frame kills it for me. The G22 and lower use steel floor pans and frames.
mine has new predator motor, harborfreight