Great info! I just purchased a used 2002 Club Car and it hits top end and shuts down. I wasn't aware that the governor could be adjusted. I'll have to check out how to adjust it. And where is the clutch video? I enjoy your informative channel. Thanks!
Excellent video , i am impressed with info. I was given a 1994 carryall 6, has 4 seats. Wiring looks all messed up. I wouldn't mind paying for service , pics video info . Thank You
can you do a video on removing the FE290 enginge (or equivalent) as far as where to block it up at and what exterior equipment needs to be removed or unattached and what bolts to take out.
@@trriley3317 the starter generator has 2 phases 1 st the starter part will turn the engine over to start. Then as the RPMs of the engine goes faster around the Generator phases kicks in and it still spins in order to charge your 12 volt system and the Battery. I hope this helped.
Any suggestions on testing the micro switches on the F&R lever? Goes in reverse, not forward. Would like to repair cart, even if it is to wire in another switch temporarily until new lever can be purchased. I don't mind pushing the car backwards manually, to a simple test and replace. 1997 Gas club car
Sorry I didn't reply right away.I had pneumonia. Testing a micro switch . 2 wires were plugged into the Microsoft switch unplugged.Both put your positive lead on one side with a continuity tester and the black lead on the other coming out of the Switch now with a lever on switch depressed You should hear a beeping sound.Come out of your getting nothing.Then the switch is faulty
i have a 89 club car cart and was in a front end fire im thinking because of the lights if u jump the solenoid it will start but i cant get power to the gas pedal to make the cart start
@@danedwards7622 , I have seen this before. Depending on your skill set we may have to have a conversation. Via the phone. Please text me at some point this weekend and be at you cart. I will explain some things we can try to figure this out. Do be frustrated. 989 395 0913. Text first so I know its you. Ill be glad to help. Don't worrie people say Im nuts not to charge a fee.. but I chose to pay it forward when a cart will not go in reverse. That was a pun..lol
Figure I would ask here. I have a 95 Club Car DS (gas) and I would like to relocate the gear switch so I don't have to bend over to move it. Any suggestions, ideas, products?
Good information is always worth a few bucks. Appreciate your time and knowledge
Thanks for your videos! Informative and entertaining.
Great info! I just purchased a used 2002 Club Car and it hits top end and shuts down. I wasn't aware that the governor could be adjusted. I'll have to check out how to adjust it. And where is the clutch video? I enjoy your informative channel. Thanks!
Excellent video , i am impressed with info. I was given a 1994 carryall 6, has 4 seats. Wiring looks all messed up. I wouldn't mind paying for service , pics video info . Thank You
can you do a video on removing the FE290 enginge (or equivalent) as far as where to block it up at and what exterior equipment needs to be removed or unattached and what bolts to take out.
When you step on a gas pedal and electric motor starts and then the gas motor starts should the electric motor shut off or does it run constantly?
@@trriley3317 the starter generator has 2 phases 1 st the starter part will turn the engine over to start. Then as the RPMs of the engine goes faster around the Generator phases kicks in and it still spins in order to charge your 12 volt system and the Battery. I hope this helped.
Any suggestions on testing the micro switches on the F&R lever? Goes in reverse, not forward. Would like to repair cart, even if it is to wire in another switch temporarily until new lever can be purchased. I don't mind pushing the car backwards manually, to a simple test and replace. 1997 Gas club car
Sorry I didn't reply right away.I had pneumonia. Testing a micro switch . 2 wires were plugged into the Microsoft switch unplugged.Both put your positive lead on one side with a continuity tester and the black lead on the other coming out of the Switch now with a lever on switch depressed You should hear a beeping sound.Come out of your getting nothing.Then the switch is faulty
i have a 89 club car cart and was in a front end fire im thinking because of the lights
if u jump the solenoid it will start but i cant get power to the gas pedal to make the cart start
Gas cart?
Maybe you can help me
I have a 2003 gas club car and it runs great going forward
But it will not move in reverse
All of the micro switch are good
@@danedwards7622 , I have seen this before. Depending on your skill set we may have to have a conversation. Via the phone. Please text me at some point this weekend and be at you cart. I will explain some things we can try to figure this out. Do be frustrated. 989 395 0913. Text first so I know its you. Ill be glad to help. Don't worrie people say Im nuts not to charge a fee.. but I chose to pay it forward when a cart will not go in reverse. That was a pun..lol
Im home call me.
Figure I would ask here. I have a 95 Club Car DS (gas) and I would like to relocate the gear switch so I don't have to bend over to move it. Any suggestions, ideas, products?
Great video there is nothing out there on these carts
You got that right!
I jumped the selanoid and nothing happened so does that mean it’s the micro switches?
@@josephdunne6069 replace the solenoid
why does golf cart need so many microswitches
I'm thinking at the time of their design. It was to sell parts today computers take their place right