How to FIX the Volkswagen Headliners - Watch!

This is a video of how we fix the headliners on the Volkswagens that the factory glue pulls away from the main liner, we use a staple gun with quarter inch staples. This happens a lot in the 2006 to 2010 Volkswagen. The older Volkswagens 2005 and under have a very thin headliner and you can use headliner adhesive glue for them, very lightly. Do not try gluing these at all. Staple gun is needed.

[@NicolasDeWolfe]

Do not recommend staples. It will tear eventually and you won't be able to staple again because you won't have enough fabric. Reglue is the only lasting option.

[@timwalker2778]

I never understood why the headliner and the pillars are covered in cloth. It should be a molded plastic piece from the same material as the dash.

[@sk8allica1]

just pay an upholsterer, dont ruin your headliner

[@scottsienkiewicz8371]

Very awesome! we are going to sell our Wolfsburg that has served us well now has 200k and it needs a few repairs like this one then it will be back to 100%. It's only worth 1400.00 and we don't need to spend 400$ in repairs. Thank you very very much!!!

[@SoloFraggersGaming]

Seems like all volkswagen cars has that issue by the doom light

[@sk8allica1]

the airbag clip unclips and under that clip is a hidden screw! you just broke that panel lol

[@carlosarredondobosch418]

All Volkswagens have such defect. What can say the VW factory?

[@kukuletz79]

Better use some glue in there....

[@ezpz7143]

This is a great inexpensive repair for this problem. Thank you for sharing

[@darrellroireau4061]

Good idea but I couldn't leave a wrinkle lol. Thx for the tip though because my gti sags by the dome light.

[@dpress8381]

Thank you for showing us this.

[@scottheaton8469]

I just did a headliner job in a car, and I ended up cutting the thing in half so I wouldn't have to take a window out. Glued the 1st half on before I put it back in and carefully smoothed the 2nd half in in place. Almost better that my cut wasn't immaculate, fit together like a puzzle. Few hours, $18 Walmart blanket and $15 can of glue, turned out close to perfect, better than I expected. Would have been perfect if I would have tracked down a grinder or wire brush, needed a bit more scraping. Good option for an older car when you want to keep the cost down.

[@Detoxingforlife]

Awesome dude

[@smb7304]

Awesome job thanks 🙏

[@ivandimov9712]

Hi, do you think the same method will work on Audi A4 B7 Avant?

[@rogerjones3504]

rough as fk...take it out and re cover it

[@Detoxingforlife]

What PSI did you set your compressor at? I almost drove the first staple into oblivion lol.

[@pareshparmar130]

Sem problem in my car thank you tip

[@sparklepaige23]

Bless youuuuuuu

[@jimcox2112]

Thank you!