DIY Honda EP3 oil pan gasket replacement K20/ k24
Вставка
- Опубліковано 8 вер 2024
- How to guide for how to remove and reseal your oil pan on a Honda EP3 or Acura RSX. This will be the same procedure for almost all K Series motors: k20, k24, k20a3, k20a2.
If you want to support me, you can purchase the oil pan and Hondabond by clicking the affiliate links below:
Dorman Oil Pan (RSX & EP3): amzn.to/3OVuz9N
Hondabond: amzn.to/3QDLsHa
NIce video mate, very informative, just about to change sump on son's kswap civic.
TY, I'm glad it helped out. Hopefully everything goes smooth for you :)
It did.
swapping the sump resolved a probably terminal issue with the oil inlet nearly completely blocked due to the PRB sump having one to many hits.
@@deesautohouse367
Thanks for the video. Did you unbolt the struts to drop the subframe?
@@JojosMotors No I did not. If I were smart, I would have disconnected the sway bar. The tension from the sway bar was holding it up further. Instead, I just used a big prybar to push it down as I mentioned in the video.
very well done. 👍
Good job but very stupid design on honda
Good overview. Thanks