FINALLY, A PERSON WHO MADE A VIDEO HOW IT SOUNDS AND SHOWED THE SETTINGS. In 3 years, that the HTS is now on. NOONE did this thing. some just talked about showing the settings, but never showed. THANK YOU !!!
I used to use a relay with a rev light to make this happen, cut the negative wire to coil and install it to relay. Did it to a 87 4runner and 88 suburban and never had a problem. It was ridiculously loud.
@@FetucciniAlfredo180 the rev light would come on. Switching the relay. Connected to the negative side of the coil. Making it dump a bunch of fuel and making it explode after leaving the cylinder. Basic science my guy.
@@talkntrash so when the light came on you would switch off all coils allowing unburnt fuel to enter exhaust and it would re-ignite after light turned off.
@@FetucciniAlfredo180 I'm not sure if it's possible to do it the same way in modern cars with coil on plug. On a single coil, the signal would be interpreted by the relay; removing the negative signal to the coil and won't ignite the cylinder in any of its stages. The hot air and pipes is what ignites the fuel. It comes out as very fine fuel (like a mist or vapor). It makes it super explosive which is why you hear the "pop" noise.
@@FetucciniAlfredo180 So yeah. After all that, when the light turns off, it continues like nothing happened. Oh, yeah... While it's happening, the light flashes like crazy.*
Fuckin love it! I was running Hondata S300 on a stock b20z with a 1320 UEL header and full yonaka exhaust and finally figured out how to shoot flames and go boom boom on hondata! But now I’ve got a high comp b20v I’m almost done putting together and then I’ll finally make a how-to video for the hondata guys 😈
Bro I LOVED this video man. PLEASE tell me how I can do this with my 97 Accord Lx coupe 5 speed. 🙏🏽fully stock & I just purchased it this week!! LOVE THE VID🙏🏽🔥🔥🔥
GreaseMonkeyMods is socketed the same thing as chipped? im looking into soldering mine so that i can learn how to tune my car and how the tuning software and data logging works. i barley got my yonke in december and ive just been fixing her up nicee👏🏼 also i got 1 more question, would the same things u said u had for your p28 to do the tune work on p75 ecu?
I have a 06 S2000 so I’ve been playing with hondata here and there. I have a crackle tune I put on it, essentially it only does it when I want it to because I have to still be giving it gas on deceleration. Idk how to tune it to where it does it automatically yet. I also wanna learn how to make it pop and shoot a flame when I’m getting on it hard and shifting gears while racing basically.
I have some questions, after do the changes in the ecu, i just need to gas the car and automatically will make the pop and bangs when I stop to gas? Or i hava to keep the gas pedal in some position to get the pop and bangs? If i have to keep the gas pedal pushed in some position, is there some option to wire a button to indicates to the ecu that i will use the launch control once? I mean, if I want to race, the button will have the function to cut the revs for example at 4500rmps and then the car will go to 8rpms( i am new in this type of content)
Man I got out of Hondaz they cost waay too much when you build them, I know you like to build on a budget, so consider older bmwz man, e36/e46/e34/e39 Any of the 6cyl are forged engines, so I spent 8k on my Honda to get it quick. I’ve spent 4k on my bmw that’s quicker and rwd. All you need is mls gasket and studs then throw 22psi at it 👌 It’s been a nice change.. I’m only saying it so you can make/learn different content for pretty cheap and an awsm outcome 😉
@@manuelcordero8467 haha yea in Australia they get expensive, manageable.. but expensive for what they are when you do a full build. Yea I won’t argue, I know Subaru guys get it pretty rough too. Boosted BRZ seems the go lately… I now have a 135i beema… money pit…
will i be able to tune my ep3 type r k20a2 with this software? i have a hondavert board in my ecu which allowed for tuning, they added massive flames on deceleration but it won’t do it stationary
I think you should change your muffler to like HKS or Grady the deeper it sells the X or have that crackling sound compared to like some eBay sure ultra flow shit
good cheaper alternative to hondata is cobra rpt. Russians make them. 130~ usd. But usually out of stock, have to write them email, when they gonna have in stock. and buy it quickly.
100% yes, I have a mini me (Japanese imported d15b block and d16y8 head) it is mostly stock I have 130 hp as of my last dyno but since then I run a dual bumper exit exhaust, I have two pipes sticking out of the sides of my front bumper lol, one out the driver side and one out the passenger side
Hey i have a bone stuck eg 1.5 16v , can i do this with the original ecu? if yes how do i connect hts with the car i'm pretty new to everything thanks a lot in advance!
@@jtbaker6457 yo wassup it's been a while xD Car is now painted in sunlight yellow with a b18c4. Spoon sw388 wheels wrapped in the classic r888r tires 😎
FINALLY, A PERSON WHO MADE A VIDEO HOW IT SOUNDS AND SHOWED THE SETTINGS. In 3 years, that the HTS is now on. NOONE did this thing. some just talked about showing the settings, but never showed. THANK YOU !!!
Exactly! Ive even asked on other videos and didnt get any answer!
I realize Im kinda randomly asking but does anyone know of a good site to stream newly released tv shows online ?
@Jayden Thiago flixportal
@Ronin Kaiser thank you, signed up and it seems like they got a lot of movies there :) I really appreciate it !!
@Jayden Thiago happy to help :D
Thanks for teaching! The comparison between ignition/fuel cut was great
learned more in this video then 5 years of learning auto and diesel mechanics
yeah i think i found a new favorite honda channel
Haha thanks bro! That means a lot!
I used to use a relay with a rev light to make this happen, cut the negative wire to coil and install it to relay. Did it to a 87 4runner and 88 suburban and never had a problem. It was ridiculously loud.
Please elaborate
@@FetucciniAlfredo180 the rev light would come on. Switching the relay. Connected to the negative side of the coil. Making it dump a bunch of fuel and making it explode after leaving the cylinder. Basic science my guy.
@@talkntrash so when the light came on you would switch off all coils allowing unburnt fuel to enter exhaust and it would re-ignite after light turned off.
@@FetucciniAlfredo180 I'm not sure if it's possible to do it the same way in modern cars with coil on plug. On a single coil, the signal would be interpreted by the relay; removing the negative signal to the coil and won't ignite the cylinder in any of its stages. The hot air and pipes is what ignites the fuel. It comes out as very fine fuel (like a mist or vapor). It makes it super explosive which is why you hear the "pop" noise.
@@FetucciniAlfredo180 So yeah. After all that, when the light turns off, it continues like nothing happened.
Oh, yeah... While it's happening, the light flashes like crazy.*
Sick dude I downloaded HTS the other night and was trying to find a vid on this, solid channel 🤘
Thanks for the info, going to be very fun with my JDM B18B in my ek hatch
Fuckin love it! I was running Hondata S300 on a stock b20z with a 1320 UEL header and full yonaka exhaust and finally figured out how to shoot flames and go boom boom on hondata! But now I’ve got a high comp b20v I’m almost done putting together and then I’ll finally make a how-to video for the hondata guys 😈
Let me know how it goes !
You ever finish this lol I have hondata and neeed flames
Can u show me how or send some setiting you have i have a b20 it’s pops itself but I want that no lift shift pops
Yo thanks for posting this video learned a lot
No problem!
Thanks i have been looking for this!
Love your information bro
Effing badass 😁👍🏼
Bro I LOVED this video man. PLEASE tell me how I can do this with my 97 Accord Lx coupe 5 speed. 🙏🏽fully stock & I just purchased it this week!! LOVE THE VID🙏🏽🔥🔥🔥
amazing video! thank you for all the info!
Thank you bro for this video we appreciate it bro 🙌🏽
Thank you for answering bro, that's awesome
So finally you doesn't use FTS shifting but only use the way it revs to shift, right ?
Correct
@@BoBuilds Thank you man, awesome !
Absolutly wonderfull guy and wonderfull info that u share...respect ..i watching all the way from Jerusalem god bless bro
sweet video, what kind of laptop do you use ?
Great video but what basemap setting did you use because we have the same engine but I can’t get a good basemap
Damn that’s sick is that possible with the stock ecu or what thanks
Unfortunately you need a socketed obd1 ecu. Personally I run a P28 with moates ostrich and hulog
GreaseMonkeyMods is socketed the same thing as chipped? im looking into soldering mine so that i can learn how to tune my car and how the tuning software and data logging works. i barley got my yonke in december and ive just been fixing her up nicee👏🏼 also i got 1 more question, would the same things u said u had for your p28 to do the tune work on p75 ecu?
I might have to check out HTS instead of using CROME for this next build...
I have a 06 S2000 so I’ve been playing with hondata here and there. I have a crackle tune I put on it, essentially it only does it when I want it to because I have to still be giving it gas on deceleration. Idk how to tune it to where it does it automatically yet. I also wanna learn how to make it pop and shoot a flame when I’m getting on it hard and shifting gears while racing basically.
Would this same type of setup work on a automatic too?
Does it damage/destroy my turbo when I run a ignition cut off 2 step on my turbo charged supra?
@VersaTune please tell me you have this feature for the NC1 MX-5 Miata!?! OMG I need that 💥🔥💥🔥
#ignitioncut
How did u set up your no lift shift? Thanks :D
I have some questions, after do the changes in the ecu, i just need to gas the car and automatically will make the pop and bangs when I stop to gas? Or i hava to keep the gas pedal in some position to get the pop and bangs? If i have to keep the gas pedal pushed in some position, is there some option to wire a button to indicates to the ecu that i will use the launch control once? I mean, if I want to race, the button will have the function to cut the revs for example at 4500rmps and then the car will go to 8rpms( i am new in this type of content)
Would this be bad for the ignition control module of your distributor?
is it safe to put 400ms in the ignition cut time mod ?.. i have a stock d16zc and want bangs like yours.
Will this work on a automatic 2005 Honda civic
How bad is on the engine ????
Man I got out of Hondaz they cost waay too much when you build them, I know you like to build on a budget, so consider older bmwz man, e36/e46/e34/e39
Any of the 6cyl are forged engines, so I spent 8k on my Honda to get it quick.
I’ve spent 4k on my bmw that’s quicker and rwd. All you need is mls gasket and studs then throw 22psi at it 👌
It’s been a nice change..
I’m only saying it so you can make/learn different content for pretty cheap and an awsm outcome 😉
No one gaf
@@Chris-rb1wl haha just pissin in the wind.. again…
Honda expensive!?..(laughs in Subaru)
@@manuelcordero8467 haha yea in Australia they get expensive, manageable.. but expensive for what they are when you do a full build.
Yea I won’t argue, I know Subaru guys get it pretty rough too. Boosted BRZ seems the go lately… I now have a 135i beema… money pit…
Can I still do this ignition cut with a turbo si and get the pops and flames?
So im assuming u need hondata or something of that nature to play with the ignition cut?
will i be able to tune my ep3 type r k20a2 with this software? i have a hondavert board in my ecu which allowed for tuning, they added massive flames on deceleration but it won’t do it stationary
Does this work with autos? thanks
Can I use these setting on a different civic
What obd2 input or tuning cable did u use to do this? My tactrix openport2.0 didn’t work.
I think you should change your muffler to like HKS or Grady the deeper it sells the X or have that crackling sound compared to like some eBay sure ultra flow shit
Yeah one day man as long as I keep getting support and views ect I'll be able to afford a good exhaust
Deeper to the sounds the better pops and the better the crackles
Awesome video in 2022.
But i didn't understand how you to adjust the settings to get the pops when you shift gears.
Got a b20 high compression if I do this will it damage the motor .?
What exhaust system is this I want the same one!
Any info/suggestions on Bee R rev limiter? Not much credible info online
Is your p28 ecu chipped or does it have Hondata?
good cheaper alternative to hondata is cobra rpt. Russians make them. 130~ usd. But usually out of stock, have to write them email, when they gonna have in stock. and buy it quickly.
@@kerstas10 well I'm all the way in South Africa, do they deliver?
Which engine you are using?
Ths dude
Is this the same procces for Hondata?
Can you still do on stock vtec motor no turbo in all involved?
Can I send me ecu to you for tune? I have a second one for tuning.
if you add a fuel cut delay and this youll get nasty back fires.
Bro I need Info about this work I hav 7k engine in my corolla
how much will you run in the dyno?
what hardware or software do i need to even add a limiter LMAO PLZ IM DESPERATE
Hondata s300, Neptune, or mega squirt
how did you connect ecu to computer?
so if i do launch control on delayed ignition eill it hurt anythinf
Are you able to adjust RPM on HTS ?
So can u tell me what I need to do
Any form of ignition cut is still putting load on the the exhaust valve trying to force it off it’s seat when it ignights it’s not exactly safe lol
That’s why there should be a disclaimer to “do at own risk”
Can I do this with my 2019 Honda civic si
And will it spool my turbo? I hope not 😭
Can i install rev limiter in my D15 carb? Thanks God Bless
No you can't
How can you do this in Hondata? can someone reply, I am just a beginner.
could you tell me the cons of ignition cut on a turbocharged car?
bad for the turbo. ignition and fuel cut is better for the turbo, but sounds less cool
Does hts work with hondata s300?
Serious question but does it burn your clutch when you launch?
It burns your clutch everytime u use it
Yow bro do you think i can run side exit headers on my stock d16z6 N/A?
100% yes, I have a mini me (Japanese imported d15b block and d16y8 head) it is mostly stock I have 130 hp as of my last dyno but since then I run a dual bumper exit exhaust, I have two pipes sticking out of the sides of my front bumper lol, one out the driver side and one out the passenger side
No muffler and no cats, as soon as the header connects to the test pipe the pipes have been cut turned and welded to aim out either side lol
Yeeeee
Yeeee yeeee!
How can I do this in hondata
What ecu
Hey i have a bone stuck eg 1.5 16v , can i do this with the original ecu? if yes how do i connect hts with the car i'm pretty new to everything thanks a lot in advance!
hey make sure you don’t fuck up your cats doing this
@@jtbaker6457 did cat delete already
@@latenightcruisin2620 then ezzzz. what’d ya end up doing with your car so far?
@@jtbaker6457 type r seats from ep3 on eg rails , 5 point harness and quick release
@@jtbaker6457 yo wassup it's been a while xD
Car is now painted in sunlight yellow with a b18c4.
Spoon sw388 wheels wrapped in the classic r888r tires 😎
How can I do this on a flash pro Hondata
is your car turbo in this video?
Hè have told in the clip. No turbo.
What software address you using?
Ita honda tuning suite version 2.15
Not sure what you mean by address
Gonna be annoying my neighbors now😂
How do I connect
Can you do this on a stick d16y7
Stock*
fuel cut is bad bro