Not really. I don't like to use carbon in the belly ( the face that the archer see the bow when shots), because It's weak than Fiberglass in compression. If you can find, fiberglass Will Works well and durable. As much that carbon do and with low cost.
love your work,just one question how does Araldite 24 hr compare to EA 40...here where i live ea 40 is hard to get and expensive. great work,cant wait for the next video
One thing I noticed, is that Araldite glue is a bit more thicker. So, the Smoth On spread a littke more easily. The Araldite delay a little more to cure too, if you use it in temperature below 25°C. But that was the only points that I could notice. About resistence, and transparence, I think that is the same thing.
Incredible work!! Really impressive looking bow! For someone who would like to build one of there own, and tips on where to get more information on building? Thanks in advance.
Impressive work, I love bows and I love practicing archery, in fact I have built a couple of longbows, and one with 90 lb pulleys but with the minimum of tools, this is Latam jaja You have my Like and also my subscription. Greetings from Piriapolis - Uruguay
It is fantastic! In the last step, when you're done, you sprayed some kind of liquid on the bow. Would you kindly tell me: what is this liquid? What is the brand? where can buy this? Thank you.
Thanks very much. Welcome to my humble Channel. It was alcohol. I did only to see How It's gona be the wood colors. And It helps to the sanding process too. ☺️
@@IndianaBows Thank you very much for your prompt response. No, that is not alcohol. The liquid in the plastic bottle which you sprayed to bow is the finish, maybe, some kind of oil.
I didn't pretend to cheat on you. Its just that english is not my birth language. I live in Brazil and speak Portuguese, so I can confuse one thing or two. 😅 I did use alcohol at 25:50 of the video (Before I put my Brand coin). But at the end I sprayed polyuretane varnish ( the same kind that is used in autos). It's a bi-component varnish, and pretty easy to find. I already tried a Lot of brands and they Works well. This one that I used in this bow was semi-gloss.
Hello, this turned out to be a really pretty bow. Can you please tell me which wood you used for the handle, I especially like the black one very much?
Love the bows you made. Do you use bamboo laminations for your bow marking? If you do, do you do fire harding for your bamboo laminations? Thank you very much.
Really nice bow! How does carbon fiber perform compared to fiberglass? Im getting ready to do carbon fiber laminate like your showed in one of your video! Thanks
Opa, tudo jóia, e você? Então... não sei bem o que vc quer pintar, mas eu geralmente não uso pintura nenhuma nos arcos comerciais. Apenas verniz PU no acabamento final. As madeiras que uso, ou as fibras, são sempre na cor original delas. As vezes faço uso betume, ou epoxy com pigmento no bambu. Mas evito ao máximo usar tbm... pra mim, sabendo combinar as cores original da madeira fica sempre mais bonito. 😉
@@IndianaBows eu comprei um arco recentemente e preciso fazer uns ajustes no riser, veio com design reto, quadriculado gerando pontas na base da pegada da mão e vou consertar e tava pensando em refinar ele todo e repintar com algum verniz mas tinha duvida se vc usava algo de diferente pra fazer esse acabamento, obrigado pela resposta me ajudou.
Elison primeiro, excelente trabalho! Parabéns! Segundo, queria te perguntar o seguinte: Vc usou a mesma madeira pra pegar a resina e o endurecedor da araldite? Não estraga a cola não? Esse bambu que vc usou foi comprado em madeireira? Qual a especificação? O tillering foi feito pela lateral? Desculpa o excesso de perguntas... kkkkk
Obrigado! Não usei o mesmo pauzinho não. Se usar, vai estragar o pote de cola inteiro. O bambú usado é chapa de bambú laminado. Encontra em alguns lugares na internet. E o tiller é feito fazendo o tapper do bambú antes da colagem do arco completo. A parte de lixar a fibra é apenas pra pequenos ajustes.
@@josephlathrop1914 Each wood species has a natural equilibrium M.C. Just bring it inside for a month or two. If it is not damaged then it's possible to make a good bow from it. Look up videos for board bow builds and follow the advice there, especially the advice on analyzing the grain structure to make sure it will be a bow that won't break. And buy and read the traditional bowyers Bible series volumes 1-4 if you are serious about it.
Beautiful bow, congratulations!!! I work a bit with wood and I practice archery, I would like to make my own bow. Could you give me the brand and type of glue that you call Araldite 24 hours? In Argentina I see several types of Araldite glue but I can't figure out which one I should use. Thanks.
Any chance you have a video on how to make the form for your bow? I've been trying to make one and I failed several times It's a waste of lumber it just does not look or feel right
20:28 estou tentando construir um riser mas sou muito amador na Marcenaria e é difícil achar material. Nesse minuto que eu marquei, é possível ver que o descanso da flecha não é no centro do arco. Eu tava reparando que nas fotos de riser que peguei pra usar de modelo, o "shelf" não é no centro (verticalmente no centro). É assim mesmo?
A passagem no centro da empunhadura ( ou um pouco mais além do centro) é mais comum em arcos recurvos. Em arcos longos ou híbridos a tendência é não chegar no centro. Até dá pra fazer indo até o centro, mas qualquer competição que vc venha a participar, o arco não será aceito como tradicional.
@@IndianaBows muito obrigado pela resposta, depois que perguntei, achei o seu site e vi que você disponibiliza uns pdfs lá, devia ter visto antes rsrsrs. Parabéns pelo seu trabalho, muito inspirador! Um dia ainda vou encomendar um Graal hahahaha (se a esposa deixar eu gastar)
Beautiful bow. I really appreciate the silence being able to hear the tools and work. Too many utubers use unnecessary annoying music.
Ah, since I'm deaf, I didn't appreciate the lack of accompanying music, but when I DO wear my hearing aids, I'd opine that it CAN be a real PITA.
Dude has some serious wood working gear.
عمل رائع وجميل ومتقن ..تستحق الاشتراك.. وفعلا انا متحمس لصنع قوس مع عدم توفر الامكانيات ...ربما بمواد بسيطة في المستقبل ...متابع وهاوي من بلد الجزائر
tahia djazair frero
Nice home....
Gorgeous bow. Sadly can’t make it at my home. Would buy from you rather 😊
You make good videos and even better bows but a vocal description would make it all super! 👍😁
I love bow building in silence
Beautiful bow!And incredibly fast.
ELISSON, O MESTRE BRASILEIRO E COM ARCO CAMPEÃO DE UM TORNEIO INTERNACIONAL.
ESSE É UM CIDADÃO DE RESPEITO.
PARABÉNS MEU AMIGO.
Obrigado amigo! Sou um aprendiz ainda, mas um dia chegamos lá. 😉
Thank you very much for sharing your beautyful work.
Very nice job !!!
Thanks very much! And welcome to my humble Channel. ☺️
That bow is a work of art, well done sir!
Beautiful says it all.
Thanks!
Beautiful transitions of colours and pattern, great job.
Thank you very much!
I am VERY impressed with your mix of old and new technology - wood, fibreglass AND carbon fibre! Please show us how it shoots!
Thanks very much. I did some shots with him on the chronograph in the begining and at the the end. 👍👍
Yeah, "His" Mix
Lindo um trabalho de mestre, parabéns e obrigado por compartilhar.
A gorgeous bow! Thumbs up!!!!
Thank you very much! If you can share with your friends, it helps the channel a lot and encourages us to make even cooler videos.
Brilliant work & beautiful bow. Cheers from a fellow bowman from Mexico. Thanks for sharing
Thank you very much!
Was für ein schöner Bogen, und so viel Arbeit 😃👍👍👍
Vielen Dank
Really liked the demo of your build. Big fan of bow making and your vid helped me with direction on how I want to build my bow. Thanks.
I need this bow!! Excellent work!
Very nice looking and performing bow
Thanks
Very pretty bow. It has mild reflex/deflex and fairly short fadeouts
beautiful bow
Your bow shoots well & actually looks very beautiful!
Thanks very much! And welcome to my humble Channel. ☺️
@IndianaBows is carbon more durable? I want to make a long lasting bow to pass down to kids and so on
Not really. I don't like to use carbon in the belly ( the face that the archer see the bow when shots), because It's weak than Fiberglass in compression. If you can find, fiberglass Will Works well and durable. As much that carbon do and with low cost.
Te felicito realmente hermoso tu arco uno así tengo que hacer o parecido para la caza , saludos desde argentina
Holy cow. Over 200! Great job
Well done!!
Thanks
great work, i did enjoy to see how do you make this wonderful bow.
Thank you very much!
Wow, an amazing bow! Excellent job, young maestro! Keep it up!
Excellent work
Parabéns pela obra prima, são excelentes arcos e muito bonito.
Muito obrigado 😁
love your work,just one question how does Araldite 24 hr compare to EA 40...here where i live ea 40 is hard to get and expensive.
great work,cant wait for the next video
One thing I noticed, is that Araldite glue is a bit more thicker. So, the Smoth On spread a littke more easily.
The Araldite delay a little more to cure too, if you use it in temperature below 25°C.
But that was the only points that I could notice.
About resistence, and transparence, I think that is the same thing.
Amazing video. Nice work!
Thanks very much! :)
Um lindo .....fuzil!!! Parabéns!!! 👏
Vlw
Q U A L I D A D E , parabéns
Obrigado 🙂
Muito bonito, você vende seus arcos?
Sim, mas apenas por encomenda
I wonder if horn and carbon can be laminated for the construction of a bow, or, are the two materials totally incompatible with each other for that?
Incredible work!! Really impressive looking bow! For someone who would like to build one of there own, and tips on where to get more information on building? Thanks in advance.
Thank you very much. Here in my channel has a lot of it. ;)
Ótimo vídeo parceiro...o arco ficou um espetáculo.
Es una belleza... Una obra de arte! Gracias por compartir
Beautiful
Excelente! Além de construir uma verdadeira obra de arte ainda é extremamente eficiente. Sem palavras....
Valeu brow! Tava sentindo falta do seu comentário já. 😁😉
@@IndianaBows ando meio sem internet.... Pra variar kkk
Здравствуйте Прекрасная работа Лук Супер а интересно какая у него цена будет
About $600
Parabéns pela Obra de Arte
Muito obrigado! ☺️
Impressive work, I love bows and I love practicing archery, in fact I have built a couple of longbows, and one with 90 lb pulleys but with the minimum of tools, this is Latam jaja You have my Like and also my subscription. Greetings from Piriapolis - Uruguay
Just WoW!
I like your work my dear
Trabalho top parabéns 👏🏽👏🏽👏🏽👏🏽
Obrigado!
Excelente trabalho, você é um mestre nesse assunto, tem como fornecer para o Brasil?
Eu sou brasileiro. 😂😜
It is fantastic!
In the last step, when you're done, you sprayed some kind of liquid on the bow. Would you kindly tell me: what is this liquid? What is the brand? where can buy this?
Thank you.
Thanks very much. Welcome to my humble Channel.
It was alcohol. I did only to see How It's gona be the wood colors. And It helps to the sanding process too. ☺️
@@IndianaBows
Thank you very much for your prompt response.
No, that is not alcohol.
The liquid in the plastic bottle which you sprayed to bow is the finish, maybe, some kind of oil.
I didn't pretend to cheat on you. Its just that english is not my birth language. I live in Brazil and speak Portuguese, so I can confuse one thing or two. 😅
I did use alcohol at 25:50 of the video (Before I put my Brand coin).
But at the end I sprayed polyuretane varnish ( the same kind that is used in autos). It's a bi-component varnish, and pretty easy to find. I already tried a Lot of brands and they Works well. This one that I used in this bow was semi-gloss.
@@IndianaBows
Thank you very much.
Yes, language sometimes can cause big problems to our communication.
Thank you for your response !
Excellent work.Can u share what r the dimensions of carbon fibre strips used.
The carbon laminate that I used was the same that I made in this video:
ua-cam.com/video/gefe1AosOWU/v-deo.html
Parabéns trabalho fantástico muito lindo arco
Muito obrigado! ☺️
Como eu admiro seu trabalho ❤
Muito obrigado! Se puder sempre curtir e compartilhar, ajuda bastante. ☺️☺️🙏
Very nice...thank you. Can you share....what sort of bandsaw blade do you use to rough out the limbs and riser ? Does it last for more than one bow ?
It's a regular, but not Very sharp, Blade.
It not cuts well. But cuts. 😅
Very Nice job and result. Which kind of glue do you use (seems to be some kind of resin with hardener) ?
Thanks! It was Araldite 24h.
Top demais, como sempre
Valeu 😊
Seu trabalho é uma obra de arte!!! Parabéns!!!
Obrigado! Seja bem vindo aqui ao canal. ☺️
Beautiful mate👍
Parabéns!!! Lindo trabalho!!! 👏🏼👏🏼👏🏼
Obrigado! ❤️
How thick are the wood veneers used? Love the bow so beautiful!! Well dooone
Thank you! I believe about 2.3mm tappering to 1.5mm in the tips.
Cheers!
Awesome, thank you!!
Love your videos keep up the amazing work you do 👍👍😃👍
Thank you Very much! ☺️
beautiful work , what is the black courloed wood ?
Thanks! It´s Rosewood
Seus arcos ficam top demais. Dá uma ideia de fazer um alvo decente pra gente, tava atirando em caixa cheia de papelão mas estava estragando as penas.
Obrigado! Procura por placas de tatame, ou placas de EVA.
Você vende esses arcos? Tem algum site?
Sim, os que faço comercialmente são por encomenda.
Os detalhes, modelos e valores estão no meu site:
www.indianabows.com
Sensacional. Quanto custa um arco desses?
Obrigado.
Os valores dos que comercializo, juntamente com os detalhes, estão no meu site:
www.indianabows.com
Hlo great work kya aap sale bhi karte ho
Top demais por quanto vc faz um desse?
Obrigado! Depende a quantidade de detalhes... ☺️ Os valores estão lá no meu site: www.indianabows.com
@@IndianaBows Oi não consegui acessar o site
Im curious of the glue you are applying to laminate the wood? i reall appreciate if you tell us ?
It's industrial Araldite
Hello,
this turned out to be a really pretty bow. Can you please tell me which wood you used for the handle, I especially like the black one very much?
Thanks very much. The Woods are Rosewood ( the dark one) and Red Angico.
Muy bonito
Gracias!
São maravilhosos seus arcos! Como faço para adquirir um de seus arcos? Gostaria de um recurvo takedown.
Obrigado.
Os arcos podem ser encomendados através do meu site:
www.indianabows.com
❤linda demais gostei muito
Obrigado!
Love the bows you made.
Do you use bamboo laminations for your bow marking?
If you do, do you do fire harding for your bamboo laminations?
Thank you very much.
Boa noite
Vc usou fibra de carbono e madeira
A colagem com cola araldite fica bom?
Se for a 24h, fica sim 👍
Really nice bow! How does carbon fiber perform compared to fiberglass? Im getting ready to do carbon fiber laminate like your showed in one of your video! Thanks
Thanks. It performs about de same as glass laminated.
E ae indiana tudo bem, cara queria saber o que usa pra pintura, que tipo de material?
Opa, tudo jóia, e você?
Então... não sei bem o que vc quer pintar, mas eu geralmente não uso pintura nenhuma nos arcos comerciais.
Apenas verniz PU no acabamento final.
As madeiras que uso, ou as fibras, são sempre na cor original delas.
As vezes faço uso betume, ou epoxy com pigmento no bambu. Mas evito ao máximo usar tbm... pra mim, sabendo combinar as cores original da madeira fica sempre mais bonito. 😉
@@IndianaBows eu comprei um arco recentemente e preciso fazer uns ajustes no riser, veio com design reto, quadriculado gerando pontas na base da pegada da mão e vou consertar e tava pensando em refinar ele todo e repintar com algum verniz mas tinha duvida se vc usava algo de diferente pra fazer esse acabamento, obrigado pela resposta me ajudou.
Elison primeiro, excelente trabalho! Parabéns! Segundo, queria te perguntar o seguinte: Vc usou a mesma madeira pra pegar a resina e o endurecedor da araldite? Não estraga a cola não? Esse bambu que vc usou foi comprado em madeireira? Qual a especificação? O tillering foi feito pela lateral? Desculpa o excesso de perguntas... kkkkk
Obrigado! Não usei o mesmo pauzinho não. Se usar, vai estragar o pote de cola inteiro. O bambú usado é chapa de bambú laminado. Encontra em alguns lugares na internet. E o tiller é feito fazendo o tapper do bambú antes da colagem do arco completo. A parte de lixar a fibra é apenas pra pequenos ajustes.
May I order one of these? It's beautiful
This one was already sold. But I can try to make another similar.
To wich pressure do You pump the hose?
Beautiful riser, by the way!
between 40 and 60psi
@@IndianaBows Thanks! so do I.
Where can I get that bamboo laminate that you use? Thank you for the great videos
Thanks! Where do you live? I'm from Brazil, but can try to find for you.
@@IndianaBows hey yeah I'm in Texas
i have seen the plans to build the taper sander
I like it
Ótimo parabéns só uma dúvida e pra venda ou uso próprio
Os que faço pra vídeos no UA-cam geralmente é sem compromisso nenhum. Mas os que faço pra venda são por encomenda
@@IndianaBows como funciona encomenda??
Awesome build. What is the thickness of the limbs?
obra de arte mesmo
Obrigado
Excelente trabajo. Como compramos desde Colombia?
If i did this out of a 100+ year old Oak Door would the wood be to dry? i have several long pieces from one in my garage I'm looking for a project for
Probably not. You can use it. 😉
@@IndianaBows Can and should are not the same thing LOL truth be told im worried about it being to dry and Snapping i dont want to get hurt
@@josephlathrop1914 Each wood species has a natural equilibrium M.C. Just bring it inside for a month or two. If it is not damaged then it's possible to make a good bow from it. Look up videos for board bow builds and follow the advice there, especially the advice on analyzing the grain structure to make sure it will be a bow that won't break. And buy and read the traditional bowyers Bible series volumes 1-4 if you are serious about it.
Beautiful bow, congratulations!!! I work a bit with wood and I practice archery, I would like to make my own bow. Could you give me the brand and type of glue that you call Araldite 24 hours? In Argentina I see several types of Araldite glue but I can't figure out which one I should use. Thanks.
Try to find Araldite Aw 106 by huntsman
@@IndianaBows Thank you very much for this information about the resin. I will look for it in my country.
Simplesmente maravilhoso!
Obrigado!
Nice work! How do you determine what the draw weight is going to be prior to making the bow?
Thanks. I estimate It by measuring the wood lams and compare (mentally) with previous Bows. Any little adjusts I do sanding the Glass (or carbon).
@@IndianaBows It's quite an art. Thanks for sharing the process.
You're welcome. And welcome to my humble Channel. ☺️
Oi que preço é um arco simples mas com boa velocidade feito por você
Where do you get your bamboo sheets from please?
what are you bonding with ?
Cara você já fez um ASL? Aquele arco do Howard Hill, American Semi Longbow?
Tipo isso?
indianabows.com/sankara-ifaa-longbow/
ISSO! perfeito. depois eu entro em contato pra encomendar. Tem como ser 60 libras? Eu ja atiro nesse peso.
Hope you are wearing a good mask when drum sanding. Carbon fiber dust is nasty nasty stuff. Awesome job!
Curious where you get your bow medallions made?
I got from a local company here ( I'm from Brazil )
que arco magnifico
Obrigado! ☺️
Serve para caça?
Sem dúvidas! Kkk
Awesome boat is there anyway you can put a template of the handle or show how you made the template? I suck at making templates lol
I don't have the digital template of the handle. But its the same that you can find in binghamprojects.
Any chance you have a video on how to make the form for your bow? I've been trying to make one and I failed several times It's a waste of lumber it just does not look or feel right
20:28 estou tentando construir um riser mas sou muito amador na Marcenaria e é difícil achar material. Nesse minuto que eu marquei, é possível ver que o descanso da flecha não é no centro do arco. Eu tava reparando que nas fotos de riser que peguei pra usar de modelo, o "shelf" não é no centro (verticalmente no centro). É assim mesmo?
A passagem no centro da empunhadura ( ou um pouco mais além do centro) é mais comum em arcos recurvos. Em arcos longos ou híbridos a tendência é não chegar no centro. Até dá pra fazer indo até o centro, mas qualquer competição que vc venha a participar, o arco não será aceito como tradicional.
@@IndianaBows muito obrigado pela resposta, depois que perguntei, achei o seu site e vi que você disponibiliza uns pdfs lá, devia ter visto antes rsrsrs. Parabéns pelo seu trabalho, muito inspirador! Um dia ainda vou encomendar um Graal hahahaha (se a esposa deixar eu gastar)
Vivo en Houston TX y quiero saber el precio de un arco como esté gracias espero tu respuesta
Hi! I'm Brazilian. The prices are in my website:
www.indianabows.com