I had a unit with intermittent 15bar pressure loss and a slight judder in the hose. Machine had all new valves, o-rings etc. Turned out it was one of the hard water seals was worn swapped it out (along with the other 2 fault went away).
Hi Josh, may I know the problem of my Kranzle? Oil become white color. What is the part number needed? There is a vibration noise when I release the trigger. Please help. Thanks.
Hi. Please contact us directly and submit a tech support ticket. Include a little video if you can about that shows us the "vibration" noise. Note. There is water in your oil. First step is change the oil and make sure cap it tight. Thanks.
@@Randomchemist That's rare.. water should flow through the system if there is no gun-jet.. You turned the water on right? Please give us a call to discuss. 800.544.1188
Hi,Kranzle 1050p Water Pressure Issue the problem we're experiencing is that the water pressure unit starts running smoothly for about 15 to 20 minutes, but then it automatically cuts off. After a short while, it starts again, but this continuous cut-in and cut-out cycle has become problematic. Additionally, we've noticed that the motor body heats up during this process . Could you please provide us with guidance on what might be causing this issue and the steps we should take to troubleshoot it?
Hi. Pulsating pressure loss is usually the check valves. Here's a tutorial on how to fix that. www.kranzleusa.com/blog/kranzle-blog-3/post/kranzle-repair-learn-how-to-replace-check-valves-69
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I had a unit with intermittent 15bar pressure loss and a slight judder in the hose. Machine had all new valves, o-rings etc. Turned out it was one of the hard water seals was worn swapped it out (along with the other 2 fault went away).
Sounds these videos helped you out. Great. Anything else we can help you with?
thank you for your sharing 😊
Thanks for watching!
GRANDE ! finalmente una spiegazione come si deve . ( quando non e in uso per molto tempo come bisogna stoccarla per non farla rovinare ? )
If storing for a long time drain all the water. If if a climate that freezes, run anti-freeze through the pump, hose and gun jet.
My unit was used upright!! Now a complete pressure loss. What would be the issue now??
See your other comment. I've given your question to Lee. He'll reply ASAP.
Hi Josh, may I know the problem of my Kranzle? Oil become white color. What is the part number needed? There is a vibration noise when I release the trigger. Please help. Thanks.
Hi. Please contact us directly and submit a tech support ticket. Include a little video if you can about that shows us the "vibration" noise. Note. There is water in your oil. First step is change the oil and make sure cap it tight. Thanks.
My pressure washer is still pulsating even after new pump unloader valve tip nozzle & gun
Give Josh Lee a call to help trouble shoot. 800.544.1188
The Kranzle midel is Kranzle 105, thanks
Hi. The 105 is an EU model. Please contact kraenzle.com directly as they will know the part number you need. We are Kranzle USA.
Mine have no water jetting out of the nozzle at all
Does water come out at all? Or, is it just NO pressure, but a stream? Feel free to give us a call to help trouble shoot. 800.544.1188 9-5 EST
@@kranzleusa5846 water does not come out at all. No water, no pressure.
@@Randomchemist That's rare.. water should flow through the system if there is no gun-jet.. You turned the water on right? Please give us a call to discuss. 800.544.1188
Sounds like I have cavitation pressure loss.. ill need to open it up and inspect. 😓
Let us know what you find. You can get parts at KranzleUSA.com aka DirtKiller.com
Hi,Kranzle 1050p Water Pressure Issue the problem we're experiencing is that the water pressure unit starts running smoothly for about 15 to 20 minutes, but then it automatically cuts off. After a short while, it starts again, but this continuous cut-in and cut-out cycle has become problematic. Additionally, we've noticed that the motor body heats up during this process . Could you please provide us with guidance on what might be causing this issue and the steps we should take to troubleshoot it?
tks
Welcome.
Tomorrow I will check my brand new X A17 TST. I guess my pressure washer has a pulsating pressure loss.
It only do 90 bar instead if 150 bar
Hi. Pulsating pressure loss is usually the check valves. Here's a tutorial on how to fix that. www.kranzleusa.com/blog/kranzle-blog-3/post/kranzle-repair-learn-how-to-replace-check-valves-69