Just to let everyone know that the LS300 is now on Android tv 11 and can now output DD/DD+ surround sound from it's built in Amazon Prime/Google Play movies and tv apps via it's HDMI Arc socket and also the Optical output now outputs DD/DTS 5.1 surround sound finally👍
Youthman...once again you hit with a video with the right people and awesome home theater tech. Derek's setup is AWESOME!! I have a relatively small dedicated home theater and I live in NJ 20 miles from NYC. For me...I followed the concept with the laser STP from Hisense, but man it is awesome and seeing you review a Short throw...I think a second time...that I know of...again you do some really great work...keep it up...Again Derek, AWESOME SETUP!
Oh and I chose STP over Overhead because I didn't want to renovate further in the house my house and convenience with the exception of putting that free screen together, I'm gonna eventually build a cabinet for the remote controlled ALR STP screen with the reinforced backing. I have a full 9.2 setup and am considering upgrading my front DefTech Towers...again great work you are an inspiration to us all.
Hello Sir, The lumens is mentioned as IDMS15.4 4000 lumens and ISO 4000 lumens for color and white brightness. But how does it differ from ANSI lumens?
i have a 1080p epson projector with a basic motorized 106" screen, nothing special and i think i paid $1400 canadian , and i its Awesome ... i have nothing to compare it to so for me it works.
This review was brought to you by Under Armour. Glad to see derrick back, nice review. If that's derricks set up I would just like to mention that the unit has a uninterrupted power supply. Ive heard if the power goes out with that unit on the heat will cause a lot of damage and not limited to the bulb exploding. Ive never had a projector, and I am not certain if that's totally accurate. However, for a 2000 dollar device a 150 dollar UPS isn't breaking the bank
Love this guys setup being that this is only a 1080p projector could I use it with a Panasonic 820 ? Or how would that work with 4K discs would it just play 1080 and being at 120 inches does it matter if it’s 4K or 1080p
Had a chance to buy one from Best Buy brand new for 1799 because of a error on the tag but I just couldn’t justify the pq loss vs a oled they had the ls500 up in a magnolia room and it looked horrible compared to my oled I think you have to spend upwards of 10k -15k to come close to oled picture quality
Epson's projectors tend to quiet down when you dial down the power of the laser. That does lower brightness, but might not be a bad tradeoff for movie watching in a dark room.
Mr Youthman! I’m sorry for “high jacking” this video to ask you this, but I trust your comments! Minidsp 10x10hd, is that for adding room correction to home theater Pre/Pro amps that don’t have audyssey, pao, dirac, etc? Thank you for everything you do!
It’s interesting that they gave you a copyright strike. I know people in the “industry”, and they say you can use up to 17 seconds of a video or audio before you can get into copyright issues. Maybe someone who knows more about me can shed more light on the subject?
The copyright owner gets notified from UA-cam when someone uses any of your content. The copyright owner was a Drone stock video company so they didn’t appreciate me using their video without paying $800-5000 per minute. They offered for me to purchase the 8 sec clip of theirs that I used twice for $150. Instead, I decided to purchase a bunch of clips from Storyblocks for $20 to use for this video and future ones so this does not happen again. Live and learn.
I can tell you now that that’s bs. I don’t know or care who the people in the industry are: they are full of it. The 10 Second myth (that’s how I remember it, i guess it changes according to whim) is just a myth: copyright is copyright.
I have this projector combined with a Vividstorm ALR floor rising screen. Curious as to what the calibrated settings were for dark room viewing (understanding that YMMV). At a minimum would be great to know which default color setting (ie Cinema, Natural, etc) was used for the final calibrated setting?
For HD SDR Rec 709 content the Natural picture mode is the closest for accuracy, i would also adjust the color temperature from default 7 to 8 and switch off Dymamic contrast and Noise reduction. Also adjust Detail enhancement all the way down to it's lowest setting to 0, sharpness setting leave on default 5. Brightness at 54 and Contrast at 43. Don't adjust the color and tint settings from their default of 50, as to set that accurate you need a Blue only mode and the EH-LS300 doesn't have that setting. Using a color filter to set the color setting isn't an accurate way to set color. Adjust the Light output setting to what you want depending on dark or bright your room is, at 80% it's very bright so if your watching in a dark room you will probably find 50/60% is enough.
hello. I'm using it with a white screen. I couldn't make the setting I want. Is there a setting you would recommend? I'm asking for color mode and custom settings.
Have you also reviewed the Epson Home Cinema 4010? I have the option to choose between that and the LS300 and have no idea what to choose. Best picture quality for sports is my biggest desire followed by movies. I will not be using either option for gaming. Any advice would be much appreciated!
Hi guys, big question here … This PJ compare to the Epson 5040ub how could be in terms of image quality??? Can’t have my beloved 5040 due to space restrictions on my new place, so wondering if I’ll be “downgraded” or will be relatively similar…. Thanks guys !!!
In any case, HD, 4K etc means absolutely nothing. Zilch, nada. It’s mostly marketing gimmick. Ok, let me rephrase that: it means a lot IF YOU KNOW WHAT IT MEANS. The main ingredient is distance. That’s all. It’s same thing for image sharpness and megapixels in a camera. Means nothing on its own. It gets meaning in relation to viewing distance. So 4K being better than HD or whether necessary or not is a non-question. What’s the setup? What’s the viewing distance? That’s the first question to ask. The other follows.
My living room has quite a bit of natural light. Would this unit be any good in my living room? Are there any projectors that would work if it gets used during the day?
Unfortunately using someone else’s calibration settings would do zero benefit to you because you’re lighting in your room is completely different. Look on eBay and get it used super cheap. Either the Disney WOW disk or the Spears and Munsell
It the screen he has in his setup. I’m not going to install a new screen every time I get another UST projector in for review. Buy whatever screen you want.
Yes but you shouldn’t need to mount the screen upside down. The ambient light would still be hitting the screen the same whether your projector is below or above.
Totally bought this automatically thinking I could mount this on a ceiling and after doing all of the drywall and 'projector cove' I am now realizing I can't find an option to be able to flip the image. Please tell me there's an option somewhere. Paid a hefty fee for this bad boy
Hi Alex, some projectors I have reviewed have the option in the menu for ceiling mount. If I didn’t mention it on the review it likely does not have that feature. Hopefully it does. Let me know what you find out.
Im getting light spill on the wall with this projector and its absolutely terrible, how do I fix this? Why do no reviews mention this? I have a 100 inch ALR screen and I lined it up as best I can
It’s certainly not an easy task. Every situation is going to be slightly different based on how high and how far away from the screen you have the projector installed. Honestly it’s a lot of trial and error
I thought this was a 1080p projectors that accepted 4k inputbfor the purposes of making use of HDR? Also heard that netlix and prime video dont play ball with the OS, anyone know of a work around? Using another device is an obvious option but if i could get it all to run off the projector it may make it easier for the fairer half to operate
Both the Epson EH-LS300 and EH-LS500 properly display 24/50 and 60hz refresh rates, that was one of the reasons i got the LS300. Unlike most of the DLP UST projectors which display all refresh rates as 60hz.
Exactly! What a bunch of a holes. Unnecessary mark up. You got a crappy speaker which you pay a couple of extra hundreds for... only to fork out some more for a decent setup. Everything is like this these day: a bunch of “included” stuff to inflate the price. Absolutely disgusting.
Hey Robert, the original video was removed due to a copyright strike. I had to replace all of the B roll footage that was showing on the screen with purchased royalty free footage
Is the lack of quality from it being a cheap short throw or just cheaper in general? Could you get a better picture for the same price with an over head?
I have hooked up projector to my receiver via the optical cable. There is no audio on my surrond speakers. Does any have a similar issue or any setting that i am missing?
@@Youthman Thanks for responding. I have 5 speakers with 1 sub. If i hook up my optical cable to TV, the same video (youtube - 5.1 channel test) when played all my speakers work, but when i play the same video on the projector (plug in the optical cable without changing else) i only get the audio on the front left/right and sub.
Optical output on the ls300 only does 2.0 pcm as stated in the manual so you will never get 5.1 sound from the Optical output. You have to use the Passthrough HDMI 2 Arc socket to get 5.1 sound from the ls300 and only when you have an external device plugged into the HDMI 1 socket as the apps on the ls300 only output 2.0 pcm. Hopefully a future update gives it 5.1 sound from it's built in apps.
Epson originally reached out to me to see if I would be interested in reviewing the LS500 but due to low availability, they sent me the LS300. So I’m not sure if I will be receiving the LS500 yet
@@Youthman If you end up testing the LS500 please watch a 3D movie, it’s one of the few UST projectors capable and I’m very curious as to the experience.
No worries. It's easy to answer read and answer every comment on your channel as you have under 500 subscribers. I could read and reply to every comment on my channel up till around 10,000 subscribers. Now that my channel is approaching 100,000 subscribers and over 500 + videos that people are commenting on each one of those videos, it’s just not possible. Be blessed. To answer the OP, there are only one set of settings inside the menu. My guess is that’s the Epson settings but they may be tied to the Android menu. Hope that helps.
You won’t with the news video. We had a UA-cam video playing on the projection screen that was flagged as copyright violation and the entire video was removed by UA-cam. I purchased Royalty Free 4K footage to reshoot the video with and will use in future videos when reviewing projectors. Live and you learn.
Anytime I mention budget, it’s in relation to the other products within that niche. When you compare it to UST projectors at twice it’s cost, yes it would be considered a budget friendly option. This would be based on US prices as international pricing would vary greatly.
Wow just searched for a price here in Australia could only find the LS500... I wouldn't call them budget friendly @ $14K, that's with a fixed frame 120" screen so thats like $13k!!!
Australia must have a huge mark up for importing. In the US the LS300 is only $2,000 and the LS500 is $4,000 which is considered budget range for projectors compared to the higher end Sony's and JVC's 6,000 and up to tens of thousands. Screens also can range from a few hundred to thousands. I'm sorry that the pricing is crazy there. I have always wanted to move to Australia, mark ups on products is the only thing that has really deterred me.
@@dillonquackenbush3895 Yeah it's all to do with scale of economy's, importers here may buy only a few hundred units whereas it would be many thousands there, thats why our wages are often a lot higher given the same job... and barely nothing is Aussie made any more our political parties have sold our souls to China.
3 - 36”W x 16”H x 1” thick teak board 3 - 24” threaded rod at 1/2” thickness Bag of 25 1/2” bolts and washers Then whatever you want to use for the feet. I found plastic stoppers and that is what I used for this project (Derek) 👋
Would love a comparison with an 85" Vizio Quantum X. Since they are the same price accounting for the screen. A good head to head projector vs tv. I have a feeling the PQ of the Vizio would destroy the Epson without too much sacrificed in terms of size in a living room.
I believe it utilizes pixel shifting to achieve the 4K image. Most people would not be able to pick out a native 4K and an e-shift image in a double blind test
It can accept 4k HDR/HLG via it's HDMI inputs, but then downscales to 1080p HDR/HLG. It doesn't have Pixel shifting, you would need to go for it's bigger brother the Epson EH-LS500 if you want a 4k Pixel Shifter.
Get grid of the ceiling fan...all you are doing is blowing the hottest air in the room, down on you. Go traditional long throw projector. Better picture for sure.
Anyone that is looking at an ultra short throw projector will understand that this is budget friendly for that style of projector. This is not the $300 projector you buy at Cosco
Love the video! Just a bummer that a "budget" short throw is still $2,000 :( hoping there's a really solid
Thanks, I would t get your hopes up for a sub $1,000 fantastic looking projector anytime soon.
Nice and clean setup Derek looks great!
i guess I'm kinda off topic but do anybody know of a good site to watch newly released movies online?
@@jacobysean1055 google popcorn time
Projector vs ceiling fan... You done a lotta good ceiling fan and it was a pleasure knowing you.
Totally agree.....if I wasn’t renting 😆
I ain’t ever giving up feeling cool
Just to let everyone know that the LS300 is now on Android tv 11 and can now output DD/DD+ surround sound from it's built in Amazon Prime/Google Play movies and tv apps via it's HDMI Arc socket and also the Optical output now outputs DD/DTS 5.1 surround sound finally👍
I don’t know what fan you speak of mines is super quiet. But the calibration is something I definitely need to apply to mines.
Youthman...once again you hit with a video with the right people and awesome home theater tech. Derek's setup is AWESOME!! I have a relatively small dedicated home theater and I live in NJ 20 miles from NYC. For me...I followed the concept with the laser STP from Hisense, but man it is awesome and seeing you review a Short throw...I think a second time...that I know of...again you do some really great work...keep it up...Again Derek, AWESOME SETUP!
Oh and I chose STP over Overhead because I didn't want to renovate further in the house my house and convenience with the exception of putting that free screen together, I'm gonna eventually build a cabinet for the remote controlled ALR STP screen with the reinforced backing. I have a full 9.2 setup and am considering upgrading my front DefTech Towers...again great work you are an inspiration to us all.
Thanks brother! I’m just happy to be along for the ride with my high school friend Youthman! (Derek)
So cool and even better after a second time.
Youthman is da MAN.
Thanks.
This video has me wanting to replace my new TV immediately and skip the avr I want to purchase.
I'm looking at Samsung frame TV's but am gonna be moving this year into a bigger spot... So this seems like the perfect answer...
Great video as always Youthman!
Thank you kindly
Hello Sir, The lumens is mentioned as IDMS15.4 4000 lumens and ISO 4000 lumens for color and white brightness. But how does it differ from ANSI lumens?
We got your back Youthman!
Projectors at that price should come with a free colab disc
i have a 1080p epson projector with a basic motorized 106" screen, nothing special and i think i paid $1400 canadian , and i its Awesome ... i have nothing to compare it to so for me it works.
Great video Michael!👍🏻
Thanks Paul. Glad you enjoyed it.
Is it possible to get details on the shelving? What wood, dimensions and I assume it is 1/2" threaded rod?
Rewatched fully for my main man Youthman!
Thanks Tony.
This review was brought to you by Under Armour. Glad to see derrick back, nice review. If that's derricks set up I would just like to mention that the unit has a uninterrupted power supply. Ive heard if the power goes out with that unit on the heat will cause a lot of damage and not limited to the bulb exploding. Ive never had a projector, and I am not certain if that's totally accurate. However, for a 2000 dollar device a 150 dollar UPS isn't breaking the bank
I've come here to chew bubblegum and support Youthman's content. And I'm all out of bubblegum
Love this guys setup being that this is only a 1080p projector could I use it with a Panasonic 820 ? Or how would that work with 4K discs would it just play 1080 and being at 120 inches does it matter if it’s 4K or 1080p
Had a chance to buy one from Best Buy brand new for 1799 because of a error on the tag but I just couldn’t justify the pq loss vs a oled they had the ls500 up in a magnolia room and it looked horrible compared to my oled I think you have to spend upwards of 10k -15k to come close to oled picture quality
Just bought one off Amazon for 1299 120 inch screen here I come
Epson's projectors tend to quiet down when you dial down the power of the laser. That does lower brightness, but might not be a bad tradeoff for movie watching in a dark room.
between this Epson LS300 and VAVA 4K short throw Laser Projector which is better? or how do they compare ?
yes great projector!👏👏👏👏
Mr Youthman! I’m sorry for “high jacking” this video to ask you this, but I trust your comments! Minidsp 10x10hd, is that for adding room correction to home theater Pre/Pro amps that don’t have audyssey, pao, dirac, etc? Thank you for everything you do!
Is it 1920x1080 according to the table at 3:10 or 4k according to 3:40?
Detail on that looks amazing.
It’s interesting that they gave you a copyright strike. I know people in the “industry”, and they say you can use up to 17 seconds of a video or audio before you can get into copyright issues. Maybe someone who knows more about me can shed more light on the subject?
Copyright bots unless it was a manual review
The copyright owner gets notified from UA-cam when someone uses any of your content. The copyright owner was a Drone stock video company so they didn’t appreciate me using their video without paying $800-5000 per minute. They offered for me to purchase the 8 sec clip of theirs that I used twice for $150. Instead, I decided to purchase a bunch of clips from Storyblocks for $20 to use for this video and future ones so this does not happen again.
Live and learn.
I can tell you now that that’s bs. I don’t know or care who the people in the industry are: they are full of it. The 10 Second myth (that’s how I remember it, i guess it changes according to whim) is just a myth: copyright is copyright.
Unfortunately there isn’t a standard amount of time. Sometimes Fair Use is a gray area.
That ceiling fan is the definition of a elephant in the room.
Any possible ideas about removing the ceiling fan ?
It’s a rental home so probably not
Would this be a good option for 100" at 13ft or so? Seen them around the same price as the wemax nova (when it's on sale).
Looks like a really great image!!!!
This projector is 1080p, although it will play 4k it will show it in 1080p, you need the Ls 500 for 4k, and that is interpolated 4k.
Yes this is a native 1080p image regardless if it receives a 4K image. Just depends on what your budget will allow.
I have this projector combined with a Vividstorm ALR floor rising screen. Curious as to what the calibrated settings were for dark room viewing (understanding that YMMV). At a minimum would be great to know which default color setting (ie Cinema, Natural, etc) was used for the final calibrated setting?
Hopefully you get and answer that I could borrow from you … …
For HD SDR Rec 709 content the Natural picture mode is the closest for accuracy, i would also adjust the color temperature from default 7 to 8 and switch off Dymamic contrast and Noise reduction. Also adjust Detail enhancement all the way down to it's lowest setting to 0, sharpness setting leave on default 5. Brightness at 54 and Contrast at 43. Don't adjust the color and tint settings from their default of 50, as to set that accurate you need a Blue only mode and the EH-LS300 doesn't have that setting. Using a color filter to set the color setting isn't an accurate way to set color. Adjust the Light output setting to what you want depending on dark or bright your room is, at 80% it's very bright so if your watching in a dark room you will probably find 50/60% is enough.
hello. I'm using it with a white screen. I couldn't make the setting I want. Is there a setting you would recommend?
I'm asking for color mode and custom settings.
Great review, thank you both!
Glad you enjoyed the video Randy
Have you also reviewed the Epson Home Cinema 4010? I have the option to choose between that and the LS300 and have no idea what to choose. Best picture quality for sports is my biggest desire followed by movies. I will not be using either option for gaming. Any advice would be much appreciated!
Hi guys, big question here …
This PJ compare to the Epson 5040ub how could be in terms of image quality???
Can’t have my beloved 5040 due to space restrictions on my new place, so wondering if I’ll be “downgraded” or will be relatively similar….
Thanks guys !!!
is this LS300 give laser protection for kids? thanks
As someone with all blurays (and no intention to replace them), I'd like to see a demo of how 4k projectors improve (or not) 1080p content.
You’re a dinosaur
Uhm, they don’t. They can’t. Don’t let anyone tell you otherwise.
In any case, HD, 4K etc means absolutely nothing. Zilch, nada. It’s mostly marketing gimmick. Ok, let me rephrase that: it means a lot IF YOU KNOW WHAT IT MEANS. The main ingredient is distance. That’s all. It’s same thing for image sharpness and megapixels in a camera. Means nothing on its own. It gets meaning in relation to viewing distance.
So 4K being better than HD or whether necessary or not is a non-question. What’s the setup? What’s the viewing distance? That’s the first question to ask. The other follows.
My living room has quite a bit of natural light. Would this unit be any good in my living room? Are there any projectors that would work if it gets used during the day?
Ultra Short throw projectors paired with an ALR or CLR screen are designed to be used in rooms that have a lot of ambient light
The brightest and best UST projector I have reviewed to date is the HiSense L9G
How does the picture on this projector and other similar ones compare to the quality of a Samsung QLED TV?
They won’t compare to an OLED. But you can’t get the immersion from an OLED that you can with a projector. Just depends on what is most important
Can this be voice controlled with the remote or hands-free?
The specs at 3:38 are wrong. This IS NOT a 4K projector. It accepts 4K input, but the projected image is 1080p.
You are correct.
Android TV built-in is nice!
Can you connect this to a bluetooth sound bar?
can you share your calibration settings as i have the same projector and seek a quick way to avoid pay for calibration or buy the disk
Unfortunately using someone else’s calibration settings would do zero benefit to you because you’re lighting in your room is completely different. Look on eBay and get it used super cheap. Either the Disney WOW disk or the Spears and Munsell
From the start of the video... he is not too happy with the end results 😅
What screen did you buy? How does it do in the light ?
Seymour Center Stage XD. It’s designed for light controlled rooms
I still wonder why dolby is not allowing dolby vision to be allowed on projectors?
How about the motion flow when playing 4k uhd bluray disc??
Heck may as well run it a 3rd time since UA-cam screwed you on the last one😉
that ALR screen is $3k though, which doesn't make sense to pair it with $1700 projector. Am I missing something here?
It the screen he has in his setup. I’m not going to install a new screen every time I get another UST projector in for review. Buy whatever screen you want.
Nice review
Thanks Jared
can you mount this to the ceiling and mount the screen upside-down?
Yes but you shouldn’t need to mount the screen upside down. The ambient light would still be hitting the screen the same whether your projector is below or above.
Do you know anything about the ommc ultra short throw projector on Amazon?
Totally bought this automatically thinking I could mount this on a ceiling and after doing all of the drywall and 'projector cove' I am now realizing I can't find an option to be able to flip the image. Please tell me there's an option somewhere. Paid a hefty fee for this bad boy
Hi Alex, some projectors I have reviewed have the option in the menu for ceiling mount. If I didn’t mention it on the review it likely does not have that feature. Hopefully it does. Let me know what you find out.
I love epson super rew
Im getting light spill on the wall with this projector and its absolutely terrible, how do I fix this? Why do no reviews mention this? I have a 100 inch ALR screen and I lined it up as best I can
It’s certainly not an easy task. Every situation is going to be slightly different based on how high and how far away from the screen you have the projector installed. Honestly it’s a lot of trial and error
@@Youthman Thank you for the reply!
I don’t think streaming services like netflix are available on this model? can you confirm?
Unfortunately I no longer have this unit in for review to check. Maybe look on their website to see if they mention it there.
So, Netflix or Disney+, etc. are not built into the operating system... is this correct?
Yup .... but Xbox/PS takes care of that
Youth man your the best
Thanks for watching D C.
I thought this was a 1080p projectors that accepted 4k inputbfor the purposes of making use of HDR? Also heard that netlix and prime video dont play ball with the OS, anyone know of a work around? Using another device is an obvious option but if i could get it all to run off the projector it may make it easier for the fairer half to operate
Just get an Amazon stick or some other device to attach to it
I thought of the stand but I made it different to not see all those threads
This or an 86inch 4k tv for $100 less?
Does it properly display 24fps? Or is it always locked as a 60hz display
Both the Epson EH-LS300 and EH-LS500 properly display 24/50 and 60hz refresh rates, that was one of the reasons i got the LS300. Unlike most of the DLP UST projectors which display all refresh rates as 60hz.
does anyone just make a ustp without any speakers or OS? seems like alot of added cost for stuff we will never use.
Exactly! What a bunch of a holes. Unnecessary mark up. You got a crappy speaker which you pay a couple of extra hundreds for... only to fork out some more for a decent setup. Everything is like this these day: a bunch of “included” stuff to inflate the price. Absolutely disgusting.
Weird but this video seems familiar, can't figure out why
Hey Robert, the original video was removed due to a copyright strike. I had to replace all of the B roll footage that was showing on the screen with purchased royalty free footage
@@Youthman that was sarcasm, but i know hard to tell on social media most of the time.
Haha totally missed that. Plus answering comments, emails, DM’s, messages as quickly as I can so I can shoot more videos doesn’t help lol
Is the lack of quality from it being a cheap short throw or just cheaper in general? Could you get a better picture for the same price with an over head?
I have hooked up projector to my receiver via the optical cable. There is no audio on my surrond speakers. Does any have a similar issue or any setting that i am missing?
I I believe optical will support up to 5.1. How many speakers do you have?
@@Youthman Thanks for responding. I have 5 speakers with 1 sub. If i hook up my optical cable to TV, the same video (youtube - 5.1 channel test) when played all my speakers work, but when i play the same video on the projector (plug in the optical cable without changing else) i only get the audio on the front left/right and sub.
Optical output on the ls300 only does 2.0 pcm as stated in the manual so you will never get 5.1 sound from the Optical output. You have to use the Passthrough HDMI 2 Arc socket to get 5.1 sound from the ls300 and only when you have an external device plugged into the HDMI 1 socket as the apps on the ls300 only output 2.0 pcm. Hopefully a future update gives it 5.1 sound from it's built in apps.
@@Youthman The optical output on the ls300 only supports 2.0 pcm as stated in the manual.
Wow that’s very interesting. I would have never guessed an optical out would be limited to 2.0. Then again, I haven’t used optical since HDMI
deja vu? haha someday i will get a projector setup
It would be extremely difficult for me to go back to a TV. It’s a completely different experience when you have a massive screen.
@@Youthman yeah i could imagine i gotta redo my basment for one maybe do a shed
Gonna have to wait a few years until "budget" in reference to ultra-short throw projectors doesn't mean you're still spending 2K 🤣
Yeah like all electronics, The longer this technology is out, the less expensive it will become
Planning to do the LS500?
Epson originally reached out to me to see if I would be interested in reviewing the LS500 but due to low availability, they sent me the LS300. So I’m not sure if I will be receiving the LS500 yet
@@Youthman If you end up testing the LS500 please watch a 3D movie, it’s one of the few UST projectors capable and I’m very curious as to the experience.
❗What this is the First time I've seen a projector with a filter I didn't even know that was a thing. Nice video
Did you guys calibrate via the android settings or the Epson ones?🤔
No reply to so many questions .. I won't subscribe thjs channel
No worries. It's easy to answer read and answer every comment on your channel as you have under 500 subscribers. I could read and reply to every comment on my channel up till around 10,000 subscribers. Now that my channel is approaching 100,000 subscribers and over 500 + videos that people are commenting on each one of those videos, it’s just not possible. Be blessed.
To answer the OP, there are only one set of settings inside the menu. My guess is that’s the Epson settings but they may be tied to the Android menu. Hope that helps.
Reupload? Think I already watched this.
Yes
You did. I received a copyright strike on the previous one and it was taken down.
@@Youthman which part to be exactly? I see no problem
You won’t with the news video. We had a UA-cam video playing on the projection screen that was flagged as copyright violation and the entire video was removed by UA-cam.
I purchased Royalty Free 4K footage to reshoot the video with and will use in future videos when reviewing projectors. Live and you learn.
lol, "budget". this unit is upwards of $5k here in rip off Australia
Anytime I mention budget, it’s in relation to the other products within that niche. When you compare it to UST projectors at twice it’s cost, yes it would be considered a budget friendly option. This would be based on US prices as international pricing would vary greatly.
Do you have to have an alr screen with the ls300?
You don’t have to have any screen
Wow just searched for a price here in Australia could only find the LS500... I wouldn't call them budget friendly @ $14K, that's with a fixed frame 120" screen so thats like $13k!!!
Australia must have a huge mark up for importing. In the US the LS300 is only $2,000 and the LS500 is $4,000 which is considered budget range for projectors compared to the higher end Sony's and JVC's 6,000 and up to tens of thousands. Screens also can range from a few hundred to thousands. I'm sorry that the pricing is crazy there. I have always wanted to move to Australia, mark ups on products is the only thing that has really deterred me.
@@dillonquackenbush3895 Yeah it's all to do with scale of economy's, importers here may buy only a few hundred units whereas it would be many thousands there, thats why our wages are often a lot higher given the same job... and barely nothing is Aussie made any more our political parties have sold our souls to China.
If only I can have a list of parts to make that stand for the projector/Center channel, it's the one thing you can't buy anywhere.
3 - 36”W x 16”H x 1” thick teak board
3 - 24” threaded rod at 1/2” thickness
Bag of 25 1/2” bolts and washers
Then whatever you want to use for the feet. I found plastic stoppers and that is what I used for this project (Derek) 👋
Ask and you shall receive 😀
Thank you Derek and Youthman, much appreciated!
@@bucfan1993 very clever idea
Would love a comparison with an 85" Vizio Quantum X. Since they are the same price accounting for the screen. A good head to head projector vs tv.
I have a feeling the PQ of the Vizio would destroy the Epson without too much sacrificed in terms of size in a living room.
I guess your definition of "budget" is a lot different than mine.
Even better the 2nd time haha.
In the UK this model is currently more expensive than the LS500, makes no sense
Is this a true 4k image?
I believe it utilizes pixel shifting to achieve the 4K image. Most people would not be able to pick out a native 4K and an e-shift image in a double blind test
It can accept 4k HDR/HLG via it's HDMI inputs, but then downscales to 1080p HDR/HLG. It doesn't have Pixel shifting, you would need to go for it's bigger brother the Epson EH-LS500 if you want a 4k Pixel Shifter.
Didn't you list this video already?
It was removed by UA-cam due to copyright so I had to replace the video footage on the screen with purchased royalty free footage.
i would only buy this if the screen came included .
Look at the HiSense that I recently reviewed - ua-cam.com/video/fLPdNP5JEJU/v-deo.html
2nd viewing 👍🏻
Thanks Mark.
"accepting content up to 4K"? The output is only 1080p
Get grid of the ceiling fan...all you are doing is blowing the hottest air in the room, down on you. Go traditional long throw projector. Better picture for sure.
Rewatched :-)
Thanks Steve
The input lag is too high. Can't use it for gaming.
Not everybody’s using a projector for gaming
Look at the HiSense L9G if you need 4K@120Hz
@@Youthman Thanks, I'll check it out. 👍
@@Youthman The L9G seems perfect, but I can't seem to find it for sale anywhere, and I'm not sure you can buy it without screen?
LS 500 is the big dogg now
It was likely the big dawg when I reviewed the LS300. It’s just what they sent me for review lol
I wish 1000 dollars was budget for me😭😭😭
It one day can be. It’s all about mindset
Budget = $2,000 UST projector + $3,000 ALR screen. Hmm...
(Just get the LSP9T, already. It's worth it!)
Какой прикол в кроссовках по ковру ходить?..
How tf is $2k budget
If you are looking at an ultra short though projector, you will quickly realize that this is about as budget as it gets.
@@Youthman touché, was hoping it was gonna be under $1k 🥲
I’m not aware of any ultra short throw projectors that are sub $1,000
3000 is way out of my budget
budget: 1800$
Budget friendly for Jeff Bezos?
BUDGET 100" Ultra Short Throw Projector TV lmao seen the price of it
I stand by my statement. I didn’t say this UST will meet everyone’s budget. Look up LGHU85LA and HiSense 100L9G.
Budget €2000 😂😂😂😂😂
Google ultra short throw projectors and you will see indeed this is budget. The LG HU85LA that I reviewed is currently $4,800.
Budget projector for wealthy people
Anyone that is looking at an ultra short throw projector will understand that this is budget friendly for that style of projector.
This is not the $300 projector you buy at Cosco