I’ve been following your content for a long time, and I’m genuinely amazed at how professional both your products and presentations have become. Everything is absolutely top-notch. Keep up the fantastic work guys. you’re doing an incredible job!
No pull for high beams 😢 I really love that movement for a certain reason, even more than indicators which I accommodated easily while high beams for fast driving is crucial. I know the side button can be mapped to high beams but the pulling movement is such a satisfying feeling
Ordered and can't wait! Looks as though they will be the perfect "ad-on" to the S3XY Knob and buttons which I love already. I can cope with the steering wheel buttons but have to take a hand off the steering wheel from my normal position to do anything, which is stupid when stalks work perfectly well.
Thank you for your trust ! Since you already have our gen2 Commander, we hope you have pre-ordered the stalks without one , since all 3 accessories can work together 🙂
Can it be removed again without leaving residu? Can it be reinstalled in another car then (is the tape made for reuse)? Is the 3m tape the same as the buttons (or at least similar in properties)?
It looks like conventional 3M VHB Tape that is cut to size. You can get replacement VHB tape from a local hardware store, it just won't be custom-cut like the original parts.
The adhesive is not the same as the one on the buttons. It's supposed to be stronger so that when you put the stalk on the steering wheel column where it belongs, it remains sturdy to keep in place. You can remove it, but over time that would weaken the adhesive.
Consider adding additional buttons on the front and back of the stalks, these would allow for reproduction of a push/pull action without the stalk having to move. If the buttons had a longer travel distance it would feel like the stalk was moving when it wasn’t.
I think you misunderstood the reasoning behind it. They deemed the push/pull mechanism to be too much of an impact on the sturdiness of the product, which is why they removed it from their initial concepts. A button doesn't negate the fact that you're still performing a certain push/pull strength on the stalk. The only way to prevent that is to hold the stalk between thumb a one or more fingers and then press the button with let's say your finger. That way your thumb is providing the necessary support. Now of course it wouldn't fall off after once or twice, but pushing/pulling is a stronger motion than up/down on the stalk. So it's a way of both protecting their credibility as a company and protecting heavy handed customers against themselves. Either way, if it's really something you would need, you shouldn't have bought a stalkless Tesla in the first place.
If we do that, we need to make the base of the Stalk 30% thicker, which will make it look so ugly and definitely not OEM. As we have shown in our previous video , we had to re design it completely, so it fits the Model 3, S and X well. Otherwise they will stick out and look silly
@@Moody_Blues_ thanks! That makes sense. Was just wondering if there might be a way around it. I don’t need the stalks as I’m used to the indicator buttons now, I could definitely do with the some sexy buttons though!
I ordered the day it came out. I hate the Highland 3P turn signal button. Currently I have the S3XY buttons, I have 2 on the dash and I put the other 2 into a 3D printed turn signal stalk I remixed from a design I saw online for the X model. It's functional and it works, but it's not as elegant as your stalks and the angle isn't perfect so I'm looking forward to getting this. Right now you are claiming a February delivery date, is that still accurate? I'm finding that lots of companies promise delivery dates on not-yet-released products and more often than not delays occur.
First of all, thank you for the support, Jonathan! We also can't wait to hear from you and your experience with the Stalks when you get them. The info on the website is accurate, and any changes that may occur will be reflected there.
@@EnhanceAuto-S3XY_Gadgets Thanks for the reply. Looking forward to trying them out, as well as freeing up the 2 buttons I used in my 3D printed temporary turn signal to be able to use for more functions. Any chance you'll be able to incorporate a homelink garage door opener activation or toggle button in the S3XY or stalk functions? That's the biggest pain in the neck I have with the touchscreen, when I need to manually open my garage door or gate or when I need to override it when I approach and don't want to open the door/gate automatically.
Just pull it off with a modest amount of force, and clean the residue with Isopropanol. this is 3M VHB foam tape so provided you don't yank the crap out of it it's easy to remove
The adhesive strength at 25C is 100% but at 100C it's around 80% so it's easier to peel it off if you warm it. 50% strength will be enough to overcome the pressure needed to pull or push the stalk without falling off. Does this answer your question?
Hello, This is a wonderful development. You have a lot of imagination. Suggestion: for Teslas from 2021 for example, would it not be possible to activate the pedestrian warning permanently because we already have the wiring and thus improve safety. The pedestrian warning is activated automatically each time the EV is initialized but this activation disappears as soon as it goes into standby. If you could activate this option permanently using a "command" function, this would allow us better safety for our EVs. Thank you for your answer.
Love the stalk concept, already preordered! When attaching 2 stalks, any way to make it look more integrated rather than having 2 separate stuck on attachments? Especially with a yoke steering, the stalks will be visible a lot more than on a round steering wheel.
Will there be a new commander coming out that allows for more than 8 functions (so we can add high beam control to a stock and windshield controls, etc)? Or will the functions we assign to the stocks take away from the options we have already selected to our sexy buttons?
A very important question is... Can you ensure that it does not void the official TESLA warranty? It is possible that if I take my car to the official TESLA workshop due to some electronic failure not related to the S3XY Stalks and they see it installed, they will void the warranty. I would need some official document in which TESLA agrees not to void the warranty by installing them. Thank you.
@ yes in the video you said it worked on a 2022 S with a yoke, but I wasn’t sure if that meant it worked with any S or X with no stalks, including those with a steering wheel instead of a yoke?
Why not mould the 2 stalk assemblies together with a connecting piece that fits over the top of the cowling? This would add more potential adhesive area to stick to the car, along with added strength and less flexing, which maybe would solve the 'pull towards' issue and allow for the traditional high beam flash function.
#1 not everyone wants both stalks. 35% of our pre orders are only for the left stalk so far. #2 some folks have screens or phone mounts installed at the top. We want them to keep their products , rather than having to choose what to keep #3 bigger pieces make the price higher. The production will cost more, the shipping will be more , and so on.
Not stalk related but, the autopilot where it adjusts the speed UP automatically. Is there a limitation that it can't reduce the speed when it's over the speed limit? Also I'd love to see a S3XY light, doesn't matter if it uses a bigger battery. But my Model X is way dark, especially with the dark interior, and the lights in the back are not enough.
Usually, when a company is trying to justify the lack of a standard functionality (like a silly 4-axis stalk movement in this case), they tend to indicate durability concerns/excuses as a main reason. They incorporate workarounds for missing features and turn them into highlights, while it's simply just cutting corners in manufacturing costs.. This is exactly how Tesla took the stalks away from us in the first place, and this is exactly what I'm noticing here. Don't be like Tesla, please. Moreover, I'd be extremelly disapointed if I spent my money on a "half product" today, just to find out in a few months that there's a full product being available, here or elsewhere.. So I hope you guys stick to your own design, which is indeed cool, just not for everyone. Btw. Appreciate your S3XY buttons, I love them! 😍
Love the products. I have a couple of questions: 1. Will there be any new release of a steering wheel phone mount? 2. Will the stalks be integrated into a steering wheel mount in the future? or 3. will a steering wheel mount be offered to secure the current stalks more securely/discreetly? TIA
We are looking into making a phone mount , but we have another project to finish before that. The phone mount will not be related to the stalks. They will both fit behind your steering wheel, but you can use them separately or together.
I personally would have preferred a hard-mount solution, similar to some of the other products on the market, but with the quality of Enhance's design and quality control. I feel like it's a missed opportunity, as there could have been a custom-fabricated housing that allowed for a phone mount or mini display - perhaps even integrated paddles - while forgoing the use of batteries.
After just 1 month my sexy buttons cut out from the back of the back of The steer wheel. The adesive band quality its not good... its not lasting... If The same problem Will be with the stalk... Its not ok
Sorry to hear that! As stated in the video, there are tens of thousands of users of the S3XY Buttons , and if the all had this issue we would know and fix it by now. After all, we produce only about 200 units each week, so changes can be made quickly. But the Stalk’s adhesive will be 5x stronger , due to the nature of how it will be used
Not a very elegant design, seems that ease of user installation was more of a priority. Not in my book, I dont care about tearing the steering column for OEM look.
What do you mean ? On every shot there was a text telling you that this is a pre production unit. Don’t forget that the stalks are on pre order. No one will have better plastic than ours
Your transparency is greatly appreciated!
Wish more companies would do in-depth Q&A videos about their products
Thank you for this great feedback! ❤️
The temperature chamber experiment is enough to lift worries on hot weather conditions. Thank you team! 👍
I’ve been following your content for a long time, and I’m genuinely amazed at how professional both your products and presentations have become. Everything is absolutely top-notch. Keep up the fantastic work guys. you’re doing an incredible job!
Wow, thank you for the amazing words!
No pull for high beams 😢 I really love that movement for a certain reason, even more than indicators which I accommodated easily while high beams for fast driving is crucial. I know the side button can be mapped to high beams but the pulling movement is such a satisfying feeling
Then, you will like our next new feature, that will be released in a week 🙂
@@EnhanceAuto-S3XY_Gadgets👀
Love your products and enthusiasm. Thanks for this update.
You are so welcome! Thank you for your support
Great video guys. You have answered all my questions. Now, I will definitely buy bundle of 2. Great product and materials especially
Ordered and can't wait! Looks as though they will be the perfect "ad-on" to the S3XY Knob and buttons which I love already. I can cope with the steering wheel buttons but have to take a hand off the steering wheel from my normal position to do anything, which is stupid when stalks work perfectly well.
Thank you for your trust ! Since you already have our gen2 Commander, we hope you have pre-ordered the stalks without one , since all 3 accessories can work together 🙂
Can it be removed again without leaving residu? Can it be reinstalled in another car then (is the tape made for reuse)? Is the 3m tape the same as the buttons (or at least similar in properties)?
It looks like conventional 3M VHB Tape that is cut to size. You can get replacement VHB tape from a local hardware store, it just won't be custom-cut like the original parts.
The adhesive is not the same as the one on the buttons. It's supposed to be stronger so that when you put the stalk on the steering wheel column where it belongs, it remains sturdy to keep in place. You can remove it, but over time that would weaken the adhesive.
@@EnhanceAuto-S3XY_Gadgets Thanks. Would be cool if you would offer pre cut replacement tape in the store.
Consider adding additional buttons on the front and back of the stalks, these would allow for reproduction of a push/pull action without the stalk having to move. If the buttons had a longer travel distance it would feel like the stalk was moving when it wasn’t.
I think you misunderstood the reasoning behind it. They deemed the push/pull mechanism to be too much of an impact on the sturdiness of the product, which is why they removed it from their initial concepts. A button doesn't negate the fact that you're still performing a certain push/pull strength on the stalk. The only way to prevent that is to hold the stalk between thumb a one or more fingers and then press the button with let's say your finger. That way your thumb is providing the necessary support.
Now of course it wouldn't fall off after once or twice, but pushing/pulling is a stronger motion than up/down on the stalk. So it's a way of both protecting their credibility as a company and protecting heavy handed customers against themselves.
Either way, if it's really something you would need, you shouldn't have bought a stalkless Tesla in the first place.
If we do that, we need to make the base of the Stalk 30% thicker, which will make it look so ugly and definitely not OEM. As we have shown in our previous video , we had to re design it completely, so it fits the Model 3, S and X well. Otherwise they will stick out and look silly
@@EnhanceAuto-S3XY_Gadgets thanks for the reply! Think I understand
@@Moody_Blues_ thanks! That makes sense. Was just wondering if there might be a way around it. I don’t need the stalks as I’m used to the indicator buttons now, I could definitely do with the some sexy buttons though!
I ordered the day it came out. I hate the Highland 3P turn signal button. Currently I have the S3XY buttons, I have 2 on the dash and I put the other 2 into a 3D printed turn signal stalk I remixed from a design I saw online for the X model. It's functional and it works, but it's not as elegant as your stalks and the angle isn't perfect so I'm looking forward to getting this. Right now you are claiming a February delivery date, is that still accurate? I'm finding that lots of companies promise delivery dates on not-yet-released products and more often than not delays occur.
First of all, thank you for the support, Jonathan! We also can't wait to hear from you and your experience with the Stalks when you get them. The info on the website is accurate, and any changes that may occur will be reflected there.
@@EnhanceAuto-S3XY_Gadgets Thanks for the reply. Looking forward to trying them out, as well as freeing up the 2 buttons I used in my 3D printed temporary turn signal to be able to use for more functions. Any chance you'll be able to incorporate a homelink garage door opener activation or toggle button in the S3XY or stalk functions? That's the biggest pain in the neck I have with the touchscreen, when I need to manually open my garage door or gate or when I need to override it when I approach and don't want to open the door/gate automatically.
Homelink support is on our list for future updates 😉
I feel like i just woke up from a cryochamber and landed in a world where a company is now making money selling a freggin flasher stalk
I just woke up from a cryochamber where a company HAS to sell a flasher stalk because there's a company that is getting rid of them as a "Feature"
@ it’s kind of my point as well lol
Well, since it is an adhesive, is there a method of taking it off without damaging the car? For example when reselling the car.
Just pull it off with a modest amount of force, and clean the residue with Isopropanol. this is 3M VHB foam tape so provided you don't yank the crap out of it it's easy to remove
Yes. Just use a blow drier for a minute and pull it off. Then clean the rest of the glue 🙂
Sorry. But I don’t understand how the stalk glue held up in 100 degree environment, like you tested, but we can remove it with a hot blow dryer?
@@danielhuang6265I have the same question 😮
The adhesive strength at 25C is 100% but at 100C it's around 80% so it's easier to peel it off if you warm it. 50% strength will be enough to overcome the pressure needed to pull or push the stalk without falling off. Does this answer your question?
Can I put these on my power wheels?
Hello,
This is a wonderful development. You have a lot of imagination.
Suggestion: for Teslas from 2021 for example, would it not be possible to activate the pedestrian warning permanently because we already have the wiring and thus improve safety. The pedestrian warning is activated automatically each time the EV is initialized but this activation disappears as soon as it goes into standby. If you could activate this option permanently using a "command" function, this would allow us better safety for our EVs. Thank you for your answer.
Thank there. We have this on the list, yes. Hopefully we will be able to discover how to do it one day for you 🙂
IME the COP does not work if you have the full intruder alarm options on, which are often more important ... :(
I have model 3 HL, but replaced a third party yoke. would it work？
Love the stalk concept, already preordered! When attaching 2 stalks, any way to make it look more integrated rather than having 2 separate stuck on attachments? Especially with a yoke steering, the stalks will be visible a lot more than on a round steering wheel.
Well, we have made it that way so there is space to place a future accessory there 😉
Will these come with various function stickers to specify what function is programmed like the buttons do?
No, they will not, but we bet that someone from the community will do it and offer the file free of charge 🙂
Will there be a new commander coming out that allows for more than 8 functions (so we can add high beam control to a stock and windshield controls, etc)?
Or will the functions we assign to the stocks take away from the options we have already selected to our sexy buttons?
The Commander can handle way over 8 functions. It can handle about 100 🙂
A very important question is... Can you ensure that it does not void the official TESLA warranty? It is possible that if I take my car to the official TESLA workshop due to some electronic failure not related to the S3XY Stalks and they see it installed, they will void the warranty. I would need some official document in which TESLA agrees not to void the warranty by installing them. Thank you.
We have tens of thousands of users with our products and no one has ever lost their warranty. 🙂
Do I need a
Commander? If yes, do you have an option to buy just the left stalk and the Commander as a package?
If you do now own our gen2 Commander, then you need one. You can choose to get 1 stalks and 1 Commander from our store , yes 🙂
Can you not unlock the acceleration boost via the dongle?
We can be we won’t. We will never unlock paid Tesla features , otherwise Tesla will start hating us and ban us eventually
Will this work on model X/S without stalks too? Is the angle on the mounting plate the same on those vehicles as it is on new model 3? Thanks
Have you watched our video? 🙂
@ yes in the video you said it worked on a 2022 S with a yoke, but I wasn’t sure if that meant it worked with any S or X with no stalks, including those with a steering wheel instead of a yoke?
Hola! Si tengo instalada la pantalla Tylard C3 pro en Model 3 Highland. Puedo pegar las palancas? Hay hueco suficiente? Gracias!
Not sure since we are not familiar with their products. We can announce in the next video how much space will be left when 2 stalks are installed 🙂
@ ok gracias!
Why not mould the 2 stalk assemblies together with a connecting piece that fits over the top of the cowling? This would add more potential adhesive area to stick to the car, along with added strength and less flexing, which maybe would solve the 'pull towards' issue and allow for the traditional high beam flash function.
#1 not everyone wants both stalks. 35% of our pre orders are only for the left stalk so far.
#2 some folks have screens or phone mounts installed at the top. We want them to keep their products , rather than having to choose what to keep
#3 bigger pieces make the price higher. The production will cost more, the shipping will be more , and so on.
@EnhanceAuto-S3XY_Gadgets fair responses
Would you make rear screens all for Tesla model 3 and Y HW3 pleaseeeeeeeere?
Rear screen? Probably not. We have 2 new projects to work on first 🙂
How will they look? The material does not look stock
As we have stated in all of our shots, those are pre-production, unsanded and not painted prototypes. Of crocuses the original will look great
bringing my 2024 model s to your operational headquarters could you insert the commander for the use of the stems and sexy buttons?
We might be a bit too far from you. 🙂
99% of our users install their products themselves, so you should not have any issues to do it
@@EnhanceAuto-S3XY_Gadgets I'm so hopeless that even to change a wheel I have to go to a mechanic
Not stalk related but, the autopilot where it adjusts the speed UP automatically. Is there a limitation that it can't reduce the speed when it's over the speed limit?
Also I'd love to see a S3XY light, doesn't matter if it uses a bigger battery. But my Model X is way dark, especially with the dark interior, and the lights in the back are not enough.
We will work on this 🙂
Usually, when a company is trying to justify the lack of a standard functionality (like a silly 4-axis stalk movement in this case), they tend to indicate durability concerns/excuses as a main reason. They incorporate workarounds for missing features and turn them into highlights, while it's simply just cutting corners in manufacturing costs.. This is exactly how Tesla took the stalks away from us in the first place, and this is exactly what I'm noticing here. Don't be like Tesla, please.
Moreover, I'd be extremelly disapointed if I spent my money on a "half product" today, just to find out in a few months that there's a full product being available, here or elsewhere.. So I hope you guys stick to your own design, which is indeed cool, just not for everyone.
Btw. Appreciate your S3XY buttons, I love them! 😍
Thank you for this feedback! ❤️
I have installed sexy buttons as indicators last week and it is working for me ❤🔥❤🔥❤🔥
❤️❤️❤️
Love the products.
I have a couple of questions:
1. Will there be any new release of a steering wheel phone mount?
2. Will the stalks be integrated into a steering wheel mount in the future? or
3. will a steering wheel mount be offered to secure the current stalks more securely/discreetly?
TIA
We are looking into making a phone mount , but we have another project to finish before that. The phone mount will not be related to the stalks. They will both fit behind your steering wheel, but you can use them separately or together.
@EnhanceAuto-S3XY_Gadgets Thanks.
oooh what other project are you working on 👀👀
Epic 🔥
😊
Using a knob on my MY, which is great! Surely stalks will be too!
I woudn't be buying any car without stalks, too bad Tesla decided to go that way...
Many people feel the same way
Awesome!
You should add an extra button on the front of the stalks
What do you mean by front ?
What a time to be alive, when you need to buy aftermarket stalks
You don’t need to. But you have options 🙂
I personally would have preferred a hard-mount solution, similar to some of the other products on the market, but with the quality of Enhance's design and quality control. I feel like it's a missed opportunity, as there could have been a custom-fabricated housing that allowed for a phone mount or mini display - perhaps even integrated paddles - while forgoing the use of batteries.
Sorry that this product did not meet your standards! Maybe the next one will 🙂
Unrelated to the stalks but is neutral shift gonna come to the S3XY knob ? lol
Yes. 🙂
Sent me ❤🎉❤❤😊
Of course
Second 😉 Nice Video, thx
❤️
After just 1 month my sexy buttons cut out from the back of the back of The steer wheel. The adesive band quality its not good... its not lasting... If The same problem Will be with the stalk... Its not ok
Sorry to hear that! As stated in the video, there are tens of thousands of users of the S3XY Buttons , and if the all had this issue we would know and fix it by now. After all, we produce only about 200 units each week, so changes can be made quickly.
But the Stalk’s adhesive will be 5x stronger , due to the nature of how it will be used
Please deactivate permanent the lane assist. It makes me Crazy.
YES PLEASE
First!
❤️❤️
Not a very elegant design, seems that ease of user installation was more of a priority. Not in my book, I dont care about tearing the steering column for OEM look.
Then you go for a different product 👍
No worries. Our products are not for everyone, and that’s ok 🙂
@victornunezmdc bye bye
i would purchase these in a heartbeat if you didn't use such tacky cheap plastics.
It's a tesla bro, as someone who drives and loves my Tesla it's not any better
What do you mean ? On every shot there was a text telling you that this is a pre production unit. Don’t forget that the stalks are on pre order. No one will have better plastic than ours
@@EnhanceAuto-S3XY_Gadgets Ok I stand corrected.