4th Gen Floor Console in 3rd Gen Ram - Rough In
Вставка
- Опубліковано 4 жов 2024
- Tools:
•1/2" or 13mm offset box wrench or passthrough sockets - these are for the 6 bolts holding in the jump seat. There's little to no clearance for a rachet *unless you have a pass through set.
•7mm socket - this is to remove the screws that hold the sides on to the superstructure.
•TT20 Torque head - this is for the screws in to the sides from inside the storage box
•Saw or cutting disk - I used a rotary saw with a wood blade because it was handy, but just about any power saw would work provided you have a steady hand and a are able to steady the side panels.
Keep us updated I want to do the same exact thing on my 3rd gen
You probably dont give a shit but does any of you know a method to get back into an Instagram account??
I stupidly lost the password. I appreciate any assistance you can offer me
@Brantley Mauricio instablaster =)
@Flynn Braylon Thanks so much for your reply. I found the site on google and Im waiting for the hacking stuff now.
Takes quite some time so I will reply here later with my results.
@Flynn Braylon It did the trick and I now got access to my account again. I am so happy:D
Thank you so much, you saved my account !
@Brantley Mauricio Glad I could help xD
Just got a 4th gen console after seeing this video probably just gonna keep it like this and not even bother securing it down. Having my arm on the armrest should be good enough 🤣
im in the middle of buying one from the junkyard . how did it go of you ?
@@georgecastro6596 I cut it exactly like the guy did in this video and it stays in place completely fine with nothing additional holding it down. Even swinging the armrest storage lid open doesn’t make it budge. I do have a little bit of a gap though between the front of the console and the cup holder panel in the dash so I’m gonna try to work that out.
We need an update! Hope all is well
12/26
No, just wrapping up work, then headed to Texas. Should get back to it in late January. However, even without the mounts it's pretty solid and I've been using it as is without any issues.
really awesome thinking of doing this. do you have a update video
That door chime is annoying. Good vid though other than that
I have the same set up but the person who installed it didn’t hook up the rest of the aux power outlets! how can I connect them all to be functional?
I need to figure out something to do with the floor 4x4 shifter
having the same problem
Did you get the mounts fabricated?
pretty impressive work
Would a 3rd gen console fit in a 4th Gen Ram? I’m looking at a 2015 Ram SSV that had its police console removed and nothing in its place and I like the consoles from the 3rd gens.
Are the cup holders still there?
Did you the aux and usb c outlets to work
How did you route the car charger
finished console yet?
Hey man! how can I connect ALL THE aux power outlets?
What year was the new console out of?
How’s the floor 4x4 shifter or do u have one