How to Swap Center Console Armrest Conversion RAM 1500 2500 3500
Вставка
- Опубліковано 18 чер 2022
- How to Swap Center Console Armrest Consversion RAM 1500 2500 3500 from a jumpseat jump seat 3rd bench seat on your dodge ram 1500 2500 3500 pickup truck
Click HERE for the Left+Right Center Console Extension Panels amzn.to/3mZpfTU
Console Front Bracket 55365120AB
Console Rear Floor Bracket 55365121AD
*Checkout other cool products Boosted Motorsports has tested and recommends HERE* 👇
www.amazon.com/shop/boostedmo...
Support BoostedMotorsports by JOINING Today! / @boostedmotorsports
Disclaimer:
Due to factors beyond the control of BoostedMotorsports, I cannot guarantee against improper use or unauthorized modifications of this information. BoostedMotorsports assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. BoostedMotorsports recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of BoostedMotorsports, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BoostedMotorsports.
As an Amazon Associate I earn from qualifying purchases. Products in the provided Amazon links are my recommendations based on honest use and experience with them.
#Ramtrucks #ram1500 #ram2500 #ram3500 #ram - Авто та транспорт
Support BoostedMotorsports by JOINING Today! ua-cam.com/channels/3B_Q1mNw1iuS8KkAZi_fUA.htmljoin
Should I rejoin? Haha
Join you fuckin heathens! Support yo boy!
I can’t even express how good that interior is looking… 👀
i love this series can’t wait to see it fully done
Wish I could upvote you twice - I know more about Dakotas and Rams than I do about the vehicles I actually own thanks to you.
Thank you I appreciate it!! 💪
It's really coming together nicely.
It’s coming out beautifully!!!
Love how the truck is coming along.
The interior is looking awesome it came out fantastic!!! Keep up the great work on the HELLRAM!!!!!! See you in the next video!!!!
So far the interior is a night and day difference ! Probably even feels more comfortable. Amazing job to date.
I love it bro! That truck is looking great! Good for you, awesome! Take care!
Wow looks really awsome well done john 💯👍
Interior looks killer.
Love the build, I got a 4 gen single cab going do some of this mods👍
great 👍 work I swap out my seats today in my 1998 jeep zj 5.9 limited the seats I got the guy cut up the seat track so I had swap the track as well bit of a pain it's easy just time consuming lol
looks awesome
Ram should get you to design a truck to your liking that would be sweet
Great video! Having the bare floor exposed would be a great time to add sound deadening mats! Makes a massive difference with road noise, along with doing the inside of the doors too.
Very good presentation thank you for showing us brother
Man I wish I could do the things you do! So bad ass!
You should build a sub box to fit behind the center console, then some storage solutions behind each seat. It's the perfect size man
Hey Jon looks great...yea some LKQ sites are run by people who don't give a shit about how they sell stuff... it's a pay check to them no pride non professional,talk to you like you don't know what you are talking about and act like you are bothering them...the one in my area I worked at before it was owed by them...I have dismantled top of the line cars... Porsche, Ferrari, Lamborghini, Mercedes Benz, BMW, vipers ECT....I called for a part and went to pick it up and allowed the sales guy to talk down to me for a few minutes then let him have it and asked for his manager...just so happens I trained this manager on everything salvage yard when he worked there on co op from trade school...... needless to say that salesman don't work there anymore..but unfortunately that's the way it's going till people start holding them accountable....now the TRX has paddle shifters so if you put a hellcat steering wheel in it I am wondering what it would take to make them work 🤔...I know there is a salvage yard on eBay that was selling parts from a TRX wonder if you could buy the harnesses if they still have the truck and have the right plugs and features ya know like cooling fans or swap out a challenger harness instead of a charger????
Good job on the video very informative..
Thank you
Looking 👍 good
Excellent video!!!
Thanks Gary!!
Would love to see if you could upgrade to a wheel with the paddle shifters. That would be sick af!
Appreciate your hard work into the channel 👊
Thanks brother 💪
Very Nice!
You got some money bro😵💫
Also putting the dirty parts in the dishwasher (non electrical parts) works like a dream to clean it like new !!!
rear sliding window? next ? 🤔
Nice job! Man, I miss my center console shift in my 11 Ram.
Those shifter knobs are trash in the newer models.
Great video. Awesome truck. Question, where did you find the radio bezel?
Time for some black headliner, pillars, and visors. I believe you can get them from a 2500 that will direct fit
Love the truck Doing one myself. where did you find carpet to fit?
How's Aaron doing on the Hellkota?? Haven't seen any updates.
I have done this mod 4 times , all on 2500’s also installing a center console shifter on the 2500’s is a nice addition! Not sure why Ram never did it from the factory !
When your swapping to a center console do you need any addition wires or do all the wires go into place like normal?
@@davidabstance6482 you will need a shifter wiring harness if your removing the shifter from the column also the cover on the steering column . Most of the time you will need an a/c duct extension that connect the vents in the console . Also the bezel around the radio on the dash all needs to be changed as well .
There is already a wiring harness under the carpet that plugs into the console to supply 12v power . You will also have to cut the carpet out under the console .
I need that top compartment Matt. Any idea where to find one?
I have a 2012 I got a 2014 center console and buckets, radio bezel and all. Will everything plug up electrically. I ordered the 2 brackets.
Awesome video!!
One question has anyone put this uconnect center console on a 2010 Dodge Ram?
Thanks for the vid, dropped mine in yesterday. Question. Is the 2nd smaller plug that comes out the side of the console, is that for the outlet on the back of the console, and is there a receiver plug for it possibly tucked under the carpet? Or would I have to get an extension to run from the white plug on the left side under the radio to the back under the carpet to the side of the console? Assuming here. lol. Please correct me if I’m wrong anyone. 😅
Im looking to go from center console to jump seat. Any suggestions there?
Do the A/C controls work from the new bezel or do you HAVE to swap it out from the old one?
Do you have to upgrade your harness to use the center console? Or it’s just plug in play?
I can't seem to find the wire harness for the USB media, do you have that particular part # or how to find it...
what is the part number of the wiring harness you had to buy for the center console from the dash to the center console, the one you said was to long and had to tie it up ??? Part # please
I'm doing this to my 2018 Power Wagon. Still sourcing the console, but what media hub is in your console? Is it a USB/SD Card/12V cigarette lighter? Or is it a USB/12V cigarette lighter? I'm trying to figure out if it matters for Android Auto to work on the radio
Know this is a older video would really like a response as I’m wanting to do this in my 2014 ram 1500 tradesman quad cab is it still the same install?
Hey did your upper console came with the mat covers? Can you share the part number for those rubber mats?
BRUH!!!! It looks so good!!!
Bad azz brother.
#BOOSTEDMOTORSPORTS FTW
🤔🚫🧢🚙💨
Thanks man she’s finally worthy of a hellcat engine 😂
What hardware/harness would I Ned to get the 120 plug on the bezel to work? Thanks!
Was this done to a 2009? Trying to do the same thing!
What are those charger/challenger seats? I want that. I wonder if you can put a challenger steering wheel on with no airbag lights on dash that would be bad ass.
Beyond excited for this build! How did I become a paid supporter of the channel?
I wanna know how you got those hellcat seats in there
do you know if that radio bezel and the radio can fit on a ram 2009
Wow what a huge difference in the interior and the outside of the truck cant wait for the hellcat components in the bay 😏👌🏽 and I think you sould throw those gold rims on there 😉 #BSTEDMTRSPRTS
Thanks will! Yeah I’m definitely going to try out the bronze hellcat wheels soon 😁
What year? I'm about to do my 2012 but don't know the exact year of the center console.
Any chance you know the interchange on a 6.4 ram? I want to swap out my 2014 6.4 which I spun bearing on to a 2022
Bro can you tell me all the screws needed
Hi so I can convert my 2009 crew cab with this center console even tho I have the uconnect stereo?
You didn't show how to get the center arm rest out. I want to get to the wiring that runs under it to the cigar lighter in the back seat. There are four screws at the top, 2 on each side, but it still doesn't move.
anyone have a list of the part numbers that are needed to do the conversion?
Did you get your radio bezel from LKQ also? I cant find the search option on their website
I have 2 for sale email BoostedMotorsports88@gmail.com
2011 want a tesla style stero control heat and air help
So did he ever show how he got those hellcat seats in there?
I installed the center console in my 2012 2500 tradesman and the plug under the driver seat I plugged in but the plug for the usb and the other one next to it I don’t see any plug for it in the radio area. Anyone know how I can power the usb cable
that bezel is dirty as hell
Will the SRT steering wheel from a Charger/Challenger work in it? After all it is going to be an SRT.😁
I have stock center console I wish I could switch to the fold down middle seat
If you are local to tampa area I still have all the fold down seat and dash parts if you want to work something out for them
I have a 2012 2500 with the 4x4 shifter on the floor has anyone done this swap I want to do it aside from it looking good it actually gives me more space than what I have now
What year truck was this? Do you know if 2014 Laramie long horn with center console will accept a jump seat out of 2020 Laramie long horn ?
Is it a 2020 classic?
I have a heated leather wrapped steering wheel if you’re interested.
Great channel,
I am
Interested on buying you dash bezel w the jump seat . If you want to sell it
Lol. I made the comment about this on an earlier video... Seems we're on the same page.
Looks like I've got a lot of work, especially seeing that I can't find any of these in a wreckers.
John,
As a long while subscriber and supporter I would be grateful for the opportunity to buy the rams old seats and console if you decide to sell. I’d want them for my personal rig.
If anybody needs a complete console kit, I have it. I did the exact opposite of this. 👍🏼
Out of curiosity I looked but didn’t see how to be a paid member .
Top pinned comment brother 💪
Support BoostedMotorsports by JOINING Today! ua-cam.com/channels/3B_Q1mNw1iuS8KkAZi_fUA.htmljoin
Ah yeah link doesn’t take you anywhere but to your main page to you tube with no link to a paid membership
Try from a computer or from your browser. Just double checked it and works for me 🤷♂️
imagine all the neons, civics, eclipses, lancers, subarus etc that could have been saved from getting trashed if content like this existed back in the day
💪💪💪
This conversion should be the opposite. Center consoles are pointless cinder blocks between you and your girlfriend. There's this thing called a column shifter and the jump seat folds down into cup holders.
This is where I leave this channel. I paying for UA-cam plus for a reason. Good luck on you build
Ok smart guy you do realize I don’t get a penny from your UA-cam plus right? See ya later loser!
It's a option for taking out the seats. If you can't give your favorite creator a few bucks then you obviously don't appreciate him nor can you afford a vehicle and extras. This video was Free and I hit the Thanks and donated 2 bucks just to show appreciation for all the hard work John puts in for us!
If you think otherwise I'll be back in New york in December when I get done I'm poland
@@shane401, far from my favorite. It keep me busy when I'm in poland
Thanks Shane! Makes me laugh when clowns want to get mad that they don’t get everything for free. Most UA-cam channels drop their car off and pick it up fully built and show nothing yet I have 100s of free how to videos. If you can afford hellcat seats you can afford the $5 even if you only sign up for one month to watch the video 😂🤦♂️
What is that module under all that? Can it be relocated?
Where did the seats come from?