Thank you for this! I usually use NX Dump Tool but it seems to be broken on 17.0.0 right now, I was going to be a bit saddened as I just wanted to copy my games over so that I could play them on my Steam Deck lol. This actually works a lot more seamlessly than NXDT in my opinion too! I like that I can just transfer it directly to the PC without having to go from Switch -> SD -> PC, its nice to skip a step.
updates and DLC can be seen inside the "installed applications" and when you highlight the dlc / updates, press the + button and you have an option to dump it to the SD card.
Yep, this video is life-saver, since nxdumptool broke again after FW 18. So, I did the same method. Also, I disable sigpatches on SYSNAND CFW for foolproofing
@@bitelaserkhalif what does the last part mean exactly? im new to this and only been using emummc for this reason, but i want to go back to playing online with the sysmmc and i have both Carts & Digital games on there. Should i just boot in ofw or is there a benefit to using cfw sysmmc, with "official" games not backups? thanks
for those whose folder is appearing empty except for a CSV. change the loader to package3 instead of fusee for my the games in the CFW were also appearing as needing to be installed. heres the change: replace "payload=bootloader/payloads/fusee.bin" with "fss0=atmosphere/package3" if its already package 3 change it to fusse instead.
i put some game cartridges into my switch and installed the updates on Stock filmware, went into Sys cfw but when i connect to MTP responder and go into my installed games folder there's nothing in it. the gamecard folder shows the cartridge that's currently inserted but there's nothing in the installed folder. What am i missing?
@@nugget9875 I am having this same problem. Did you ever figure it out? my digital games show up but not the update or dlc for mk8 which i have on a cartridge
@@nugget9875 if all you games show as needing to be installed. change the hekate_ipl.ini to boot with package3 instead of fusee (or vice versa) replace "payload=bootloader/payloads/fusee.bin" with "fss0=atmosphere/package3" i did this and now they show up.
I want to ask you this: "What would happen if you were to play the same game card on an unmodded Switch?" EDIT: Never mind. I just did a test game dump with my physical copy of Pokémon Legends Arceus, and checked to make sure both my V1 Switch and Switch OLED were NOT banned at all.
It will only ban the V1 so far, assuming it has the dumped one installed. No idea how long they take to ban a console. Probably your console(s) have red flags now.
DBI doesn't show the 4: Installed Games folder despite the option is enabled .... Edit: DBI + prod.keys must be on SD Card/switch and not on SD Card/switch/DBI
Dbi is the most important software for a jailbroken switch look no further this is the answer . The app is flawless I'm able to install games using dbi ftp server with my phone wirelessly awesome!!!
Did you end up figuring this out? I'm going through the same issue right now. I'm in my Switch's "installed games" partition and all of the NSP files are 1kb and the NSP files inside of the folders are about 500bytes in size. Edit: Nevermind, updating to the latest DBI seems to have fixed that issue. Games are showing up fine now.
when I dump sysnand I cant go back with any button, only power button brings me back. And when I go then to reboot into hekate it just returns me to the same screen, it doesnt reboot. I use then turn off power. But when I reboot into hekate, there is no sysnand, just the usual cfw, ofw, lockpick and tegra. What the problem, any opinion. I have latest version of lockpic.
how do i do the "system clean wipe" you mentioned in the video? i have installed tinfoil by accident on my cfw sysmmc and then realized i wasnt supposed to and swithched to the cfw emummc. The nsw has been offline and i havent used or opened the eshop or anything, i also dont want to boot into the ofw either now bc i think it will show up there bc its the same memory chip from what i understand now.. the 32gb nand chip itself.. Do you have a video on how to clean the sysmmc now that i have deleted tinfoil from the cfw sysmmc as well as the app i downloaded from tinfoil? thanks!
Please help,i already active option in installed app but when connect to pc it not there,i want to backup my game but the folder no 4 not there please help...
You have some awesome tutorials! Although I’m not sure that dumping a game cart with MTP responder will automatically dump game updates as you indicated.
I can't send any file from my desktop to SD CRAD, Transfer always fails, what's the problem? But the opposite works excellently, can anyone help me plz?
I have a problem and I don't know what to do. I installed Animal Crossing New Horizons and Zelda Breath of the Wild on my Switch but only Animal Crossing is shown when i go to installed games and i have no idea why. I thought it might be because Zelda is on a cartridge but it should still show up there, right?
I've been trying to dump my cartridges that I own with this DBI method but I've been having a hard time dumping the update files too, but I may have found a solution? Tell me if this is okay: Dumping the cartridge using this MTP Responder Method, then I went to DBI menu, browse installed applications, and then found the update files I have on the NAND. I dumped them to SD Card and put them on PC to install to switch later. Does this work?
When I downloaded the game a blank square appeared on the home screen with a infinite loading icon on it. It says it could not start the software, is there a reason why?
Hey man I have a question, So I downloaded and installed Mario Kart using this method, but when I go to play it, it shows the ICloud logo above the game and tells me to connect to the store to download it, who ever hacked my switch somehow added this a doom and resident evil to the Home Screen and I’m not able to play these games. Is there a way around this? I’d love to play Mario Kart and Pokemon Arceus.
@@sthetixofficial I fixed it, so apparently I'm stupid, and I was installing the update and NOT the base ROM lmfao. finally figured it out and all is good. I really do appreciate the response. You and your videos made this an easy process and would have taken me much longer to figure it out. So seriously thank you so much man you are appreciated 100%
To install them into a new console do i just move the files in the switch reversed process or do i need tk reinstall them with awoo installer or soemthing
@@sthetixofficial hello, un ny files under installed games i have folders of the game with different sub folders inside and i also have some nsp files of the game outside as well. what are these? should i just copy all of them?
@sthetix i need help not related to this, I was installing game through DBI, but the screen turned off, and after trying to turn it on for a while, it only loads to sysnand, how can i get back to hekate menu when u boot up, its a custom bought modded switch, need help plzz.
@@sthetixofficial I forgot to do one of the most basic things, I took out the sd card and put it back in and it reset it to the hekate menu. Thx for the fast response sthetix, appreciate ur work.
Do you have a guide to setup oled switch once the mod chip installed like the emmuc and from sd file or sd raw to setup it because my friend was asking.
Saat di MTP responder di komputer saya kok tidak ada folder [4: Installed Games] nya? Padahal sy sudah ikuti tutorial nya step by step. Kira² itu kenapa, ya?
Udah di enable semua d config nya tapi ttp ga k baca di komputer foldernya. Folder yg lain kebaca semua cuman Installed Games yg hilang. Btw, sy pake HATS pack yg terbaru, Fw 17.0 dan Dbi 640
Is it safe to install dbi on sysnand? I’ve had ppl tell me that you can without risking a ban. There are games that I want to dump that I only have on my sysnand
Sthetix, can you send me a zip file containing your Nintendo 3ds folder and everything? It's because the SD card of my 2ds doesn't work when I insert it and all my games are not in it
@@sthetixofficial I am already using a C to C cable. How do I double check to make sure the USB 3.0 setting is in fact on? EDIT: It seems the issue was the cable. I tried a Thunderbolt 3 cable and now it says USB 3.0 Super Speed. USB-C cables are a complete mess.
Just want to ask, about my hack ps vita , whay can i do when i get GPU crash? i bought it hacked alr3ady, can i remove the hack and hack it again to solve the GPU crash? thanks hope you can help
Thank you for this! I usually use NX Dump Tool but it seems to be broken on 17.0.0 right now, I was going to be a bit saddened as I just wanted to copy my games over so that I could play them on my Steam Deck lol.
This actually works a lot more seamlessly than NXDT in my opinion too! I like that I can just transfer it directly to the PC without having to go from Switch -> SD -> PC, its nice to skip a step.
same boat, one question though. if you want to backup a cart, how do you also backup the updates/dlc? don't see the option at least for my BotW
updates and DLC can be seen inside the "installed applications" and when you highlight the dlc / updates, press the + button and you have an option to dump it to the SD card.
Yep, this video is life-saver, since nxdumptool broke again after FW 18.
So, I did the same method. Also, I disable sigpatches on SYSNAND CFW for foolproofing
@@bitelaserkhalif what does the last part mean exactly? im new to this and only been using emummc for this reason, but i want to go back to playing online with the sysmmc and i have both Carts & Digital games on there. Should i just boot in ofw or is there a benefit to using cfw sysmmc, with "official" games not backups? thanks
@@mxracingunlimitedltd7784 cfw sysnand , is for something like
Genned Pokemon, ACNH island hack, etc. Also for dumping eShop purchases+saves too
Another great video. Well done.
thank you
DBI is also the best to grab your saves and use others saves!
best tutorials anywhere in the world
Thank you.
for some reason 4 on the nintendo switch does not show up for the installed games and I'm not sure why
did you find a solution?
@@brutalremi no unfortunately
@@Steelberd use a older version of dbi, it works for me, use the 628 version
for those whose folder is appearing empty except for a CSV. change the loader to package3 instead of fusee
for my the games in the CFW were also appearing as needing to be installed.
heres the change: replace "payload=bootloader/payloads/fusee.bin" with "fss0=atmosphere/package3"
if its already package 3 change it to fusse instead.
TANK you man i love you🤣🤣
Thank you, this helped a lot : ]
Awesome! Thanks!
i put some game cartridges into my switch and installed the updates on Stock filmware, went into Sys cfw but when i connect to MTP responder and go into my installed games folder there's nothing in it. the gamecard folder shows the cartridge that's currently inserted but there's nothing in the installed folder. What am i missing?
try to unhide the hidden folders in Windows.
@@sthetixofficial just tried that and the installed games folder is still empty, the only thing that's in it is a ( installedApplications csv file)
@@nugget9875 I am having this same problem. Did you ever figure it out? my digital games show up but not the update or dlc for mk8 which i have on a cartridge
@@nugget9875 if all you games show as needing to be installed. change the hekate_ipl.ini to boot with package3 instead of fusee (or vice versa)
replace "payload=bootloader/payloads/fusee.bin" with "fss0=atmosphere/package3"
i did this and now they show up.
Question: where is the update and dlc files for the cartridge version? Is it caked into the rom already or is there a different location?
you need to get it online (legally) or just get the "war ez" version and install it using DBI
I want to ask you this: "What would happen if you were to play the same game card on an unmodded Switch?"
EDIT: Never mind. I just did a test game dump with my physical copy of Pokémon Legends Arceus, and checked to make sure both my V1 Switch and Switch OLED were NOT banned at all.
It will only ban the V1 so far, assuming it has the dumped one installed. No idea how long they take to ban a console. Probably your console(s) have red flags now.
DBI doesn't show the 4: Installed Games folder despite the option is enabled .... Edit: DBI + prod.keys must be on SD Card/switch and not on SD Card/switch/DBI
i have my keys in the right spot but the installed games aren't appearing. only the .csv file :/
Wow
Awesome tutorial, thank you
You're very welcome!
Thank you!
wait i have a question that i didn't really follow using dbi, Can you get banned even after you dumped your game on sysmmc?
yes you can if you install the dumped file to your sysmmc.
Once I rip the file onto the computer, how can I move it onto my SD card on my switch?
DBI is the most useful software for a modded Switch that no one knows about! 🙁
Preach!
it's because most of the community doesn't support it for being closed source..
Dbi is the most important software for a jailbroken switch look no further this is the answer . The app is flawless I'm able to install games using dbi ftp server with my phone wirelessly awesome!!!
I used it to dump the game and update using DBI but the game is having an error
**software has close due to an error**
@@keepitshort4208
It could be that you don't have the latest sig patches or it's a bad dump.
What would it mean if the size of my files is only showing like 1 KB lol
it is not the correct file
Did you end up figuring this out? I'm going through the same issue right now. I'm in my Switch's "installed games" partition and all of the NSP files are 1kb and the NSP files inside of the folders are about 500bytes in size.
Edit: Nevermind, updating to the latest DBI seems to have fixed that issue. Games are showing up fine now.
when I dump sysnand I cant go back with any button, only power button brings me back. And when I go then to reboot into hekate it just returns me to the same screen, it doesnt reboot. I use then turn off power. But when I reboot into hekate, there is no sysnand, just the usual cfw, ofw, lockpick and tegra. What the problem, any opinion. I have latest version of lockpic.
you better use my pack, www.sthetix.info/hats/releases
please extract it to your sd card.
how do i do the "system clean wipe" you mentioned in the video? i have installed tinfoil by accident on my cfw sysmmc and then realized i wasnt supposed to and swithched to the cfw emummc. The nsw has been offline and i havent used or opened the eshop or anything, i also dont want to boot into the ofw either now bc i think it will show up there bc its the same memory chip from what i understand now.. the 32gb nand chip itself.. Do you have a video on how to clean the sysmmc now that i have deleted tinfoil from the cfw sysmmc as well as the app i downloaded from tinfoil? thanks!
You need to watch my systemwipe video and appy it to your sysmmc.
I'm trying to get my saved pokemon Scarlet file from a cartage to emu. I'm afraid of losing it. Is there a way to do it?
You can dump it with JKSV
@ it’s too late. It’s all gone. Thanks for the answer
Please help,i already active option in installed app but when connect to pc it not there,i want to backup my game but the folder no 4 not there please help...
edit the dbi config and enable the installed or game card option
@@sthetixofficial I did this, but it still doesn't show the installed games folder, I don't know what else I can do
@fcosta93 did u enable it in the dbi config? and try to disconnect and remount the drive
You have some awesome tutorials! Although I’m not sure that dumping a game cart with MTP responder will automatically dump game updates as you indicated.
Thank you
I can't send any file from my desktop to SD CRAD, Transfer always fails, what's the problem? But the opposite works excellently, can anyone help me plz?
try updating your firmware/ replace the USB port / cable.
@sthetixofficial update already today 17.0.0 and try usb port but same problem.
I have a problem and I don't know what to do. I installed Animal Crossing New Horizons and Zelda Breath of the Wild on my Switch but only Animal Crossing is shown when i go to installed games and i have no idea why. I thought it might be because Zelda is on a cartridge but it should still show up there, right?
Maybe you installed the updates, not the base game.
So this method will also work for emuNAND right? I have a few modded switches and want to transfer games.
It does , but we use MTP responder method better.
I've been trying to dump my cartridges that I own with this DBI method but I've been having a hard time dumping the update files too, but I may have found a solution? Tell me if this is okay:
Dumping the cartridge using this MTP Responder Method, then I went to DBI menu, browse installed applications, and then found the update files I have on the NAND. I dumped them to SD Card and put them on PC to install to switch later. Does this work?
yes that will work.
How do you delete a game that you no longer want to have on the Switch? Do you just delete the file from Installed games folder?
yes you can delete it like usual , inside the system settings.
Only works for older DBI versions...installed files never show up now even with the flag on the configuration.
When I downloaded the game a blank square appeared on the home screen with a infinite loading icon on it. It says it could not start the software, is there a reason why?
Maybe the game is corrupted
2 questions, do you need to be connected to the internet for this ?
And
Can you do this for the digital games In the emummc side of The switch?
No need to be connected to the internet. You can install digital games too
Hey man I have a question, So I downloaded and installed Mario Kart using this method, but when I go to play it, it shows the ICloud logo above the game and tells me to connect to the store to download it, who ever hacked my switch somehow added this a doom and resident evil to the Home Screen and I’m not able to play these games. Is there a way around this? I’d love to play Mario Kart and Pokemon Arceus.
Try to reinstall the games. Check if you have loaded the sysmmc or emummc?
@@sthetixofficial I fixed it, so apparently I'm stupid, and I was installing the update and NOT the base ROM lmfao. finally figured it out and all is good. I really do appreciate the response. You and your videos made this an easy process and would have taken me much longer to figure it out. So seriously thank you so much man you are appreciated 100%
you are welcome
To install them into a new console do i just move the files in the switch reversed process or do i need tk reinstall them with awoo installer or soemthing
you need to follow the same guide.
@@sthetixofficial hello, un ny files under installed games i have folders of the game with different sub folders inside and i also have some nsp files of the game outside as well. what are these? should i just copy all of them?
@sthetix i need help not related to this, I was installing game through DBI, but the screen turned off, and after trying to turn it on for a while, it only loads to sysnand, how can i get back to hekate menu when u boot up, its a custom bought modded switch, need help plzz.
try to reboot the console and if it is chipped, it means the chip doesnt work properly.
@@sthetixofficial I forgot to do one of the most basic things, I took out the sd card and put it back in and it reset it to the hekate menu. Thx for the fast response sthetix, appreciate ur work.
Confused. Are these duplicates? Can we delete the single .nsps from the switch?
the nsp will be on your computer
I hope you have a great life, thank you
Thank you
I will give this a try, having issues with tinfoil resetting usb connection. Does this have same issue?
Thank you for video
Please try it.
Do you have a guide to setup oled switch once the mod chip installed like the emmuc and from sd file or sd raw to setup it because my friend was asking.
you can watch the "setting up from. scratch" video on my channel
Where do you put PlayStation games ?
how?
@@sthetixofficial yea Using DBI where to put ps games
@@sthetixofficial i know where to put NSP but what about ps games .
can i dump romfs?(within method other than this)
maybe you can, you can ask discord.gg/C29hYvh
Hi
can you share that atmosphere package you are using?
github.com/sthetix/HATS/releases
Saat di MTP responder di komputer saya kok tidak ada folder [4: Installed Games] nya? Padahal sy sudah ikuti tutorial nya step by step. Kira² itu kenapa, ya?
edit config dbi nya dan cek di bagian mtp ada setting yg harus di enable.
Udah di enable semua d config nya tapi ttp ga k baca di komputer foldernya. Folder yg lain kebaca semua cuman Installed Games yg hilang.
Btw, sy pake HATS pack yg terbaru, Fw 17.0 dan Dbi 640
ge ngerti kalo gitu, coba tanya ke githubnya DBI
saya ngalamin masalah yang sama, masalah abang solusinya akhirnya gimana bang?
Is it safe to install dbi on sysnand? I’ve had ppl tell me that you can without risking a ban. There are games that I want to dump that I only have on my sysnand
running dbi on sysnand won't get your console banned. unless you install nsp or xci to the sysnand
@@sthetixofficial thank you so much! Sounds like I’m safe. JKSV is safe as well, correct?
What about update and dlcs ?
Same thing, same guide.
@@sthetixofficial can I make separate folders games and update/dlcs within that "micro card" folder ?
no it doesn't work that way, when installed it will be mixed in the same place
@sthetixofficial appreciate the reply so I just have to drop everything in that obe place
yes
Can i use this to dump from emunand?
u can
@@sthetixofficial if im dumping from emunand do i pick the dump from emunand option on lockpick.rcm?
I see you don't have the usb 3.0 speed anymore since you are on dbi 598. In your other video you had 3.0 on dbi 398.
i think DBI has a bug on it?
stay in server started in mtp responder, dont show "session opened"
check your USB cable or port.
Can you make a video about emuMMC, sysMMC, OFW?
I've made it last time, but I will make a better one next time.
Sthetix, can you send me a zip file containing your Nintendo 3ds folder and everything? It's because the SD card of my 2ds doesn't work when I insert it and all my games are not in it
try watching the latest uploaded video on my channel
Halo bang sthetix, latest video/cara nge-softmod Switch V1 video yg mana ya bang? (udah cek dan bisa dicfw SNnya)
ua-cam.com/video/_v-bGPtUXOk/v-deo.html
Does this work with linux?
i dont think so.
- Do not listen to people who say they are going to be banned, they do not know how the jailbreak works
*proceeds to show how he has been banned*
there are consequences when you mod your console. if you don't want to get banned, please don't mod it.
Can u fix my Nintendo LCD for free???
no bro
@@sthetixofficial oh ok
@@sthetixofficial😂
Is it normal for the connection to be set to USB 2.0 speeds or do I have to change a setting?
did you use my pack? you can set your ams config to have usb 3.0 speed.
@@sthetixofficial Yes I did. How do I change the "ams" config?
if you use my pack then it should have a usb 3.0 by default. try changing the usb port
@@sthetixofficial I am already using a C to C cable. How do I double check to make sure the USB 3.0 setting is in fact on?
EDIT: It seems the issue was the cable. I tried a Thunderbolt 3 cable and now it says USB 3.0 Super Speed. USB-C cables are a complete mess.
Just want to ask, about my hack ps vita , whay can i do when i get GPU crash? i bought it hacked alr3ady, can i remove the hack and hack it again to solve the GPU crash? thanks hope you can help
Guys this video is far too over complicated all you need to do is select dbi and click install game on cfw that's it lol saved your 5 mins
there is insufficient space to complete operation I HAVE SPACE! trying to put on pc and tried multiple locations on pc...
Try updating the firmware version and the boot pack.