From the last 2 months I was able to understand most of the things from the scratch. Updated my modchip, installed it, handled all things on Hekate, etc., Thank you so much for your guides.
for many months I've been watching your guides but just now I got my switch modded and can make use of all of the information you've made available. Many thanks.
Great guide, but I have a question regarding a banned v1 Switch. What steps would be unnecessary if the system is already banned? Is there any point in setting up the emuMMC partition at that point?
My switch wont boot to hekate. I was updating my HATS but forgot to delete the three folders (bootloader, atmosphere, config). I had already pasted/replaced all the files on the SD card before deleting those folders. Now, I am encountering this error: “Missing LP0 (sleep) lib!” “Update bootloader folder!” Kindly help. please
@@sthetixofficial i’ve replaced the sd card reader with a new one but still wont work. I also observed that it wont boot to original firmware by clicking the volume up and down at the same time on the bee screen. It shows blue screen after clicking the volume buttons.
Does the SD Card have to be Fat32 before doing this tutorial? I think mine was exFat but it kinds shows Fat32 now. Does Hekate do this automatically? Thanks
He can't say anything else or The Business can take down the video for copyright infringement. In reality they want to censor this content and use copyright as a scapegoat.
I received a "failed to launch HOS! Message. Unknown package version. HOS version not supported!Or emuMMC corrupt! Anyone know how to fix this? I'm so frustrated as this is my third attempt arriving at this outcome. Any help is appreciated ❤️
@@sthetixofficial Issue ended up being related to some files being corrupted. Wiped everything clean and then redownloaded everything with a download manager and it all worked fine
When i try to lanch EMUMMC it says failed to match warmboot with fuses ! If you continue, sleep won’t work ! And I get the same message also when booting SYSMMC ( stock )
Why do you set up emunand with 12 gb when I’ve seen other’s do it with more? I’m kindd new to this and I just bought my picofly. I’m just trying to figure out what to do. Thanks.
Dude you are nailing every video. I am new to jailbreak scene and your video are my go-to video guides. Anyway do you have a video or link about a guide on how to transfer save file from ofw/sysnand to emunand?
@sthetixofficial Awesome video, very easy to follow, just wanted to ask, Do I need to keep the backup dumped files on the sd in the switch after copying them to my pc, or can I delete them to save up some memory as 60gb is alot to keep on there If it doesn't need to be on there. Thanks in advance
I am very grateful for everything you do. I have a question. is it possible to use 2 SD cards, for example on one you have the provisions of the game, on the other others and just change them like that? Greetings
I would like to to the same too. I’m assuming just insert the 2nd sd card. When the no payload screen shows up just press vol - and vol + simultaneously to boot into OFW.
ive been trying to set up my modded lite with this method, but there was no combo release on the HATS github page- on emuNAND launch, i just get an error that says 'unknown pkg1 version' like twice. i'm doing it from a fresh microsd and using the exact same method as in the video
Just did this on my V1 following all the steps and worked flawless! I will upgrade the sd card in the future, I just need to copy/paste everything to the new card, right?
Hi, ive followed everything with your latest HATS pack 1.71-5 through tele. I've successfully boot to Emummc once and got error message on sysmmc. Now i couldn't boot to both sysmmc or emummc.
Hi, i'm currently trying to migrate my old Switch with SXOS still installed on it, is it possible to use this guide to migrate ? Also im using the older unpatched Switch V1 that still request payload to boot the CFW. TIA
Hi can someone here please help me. When I try to open it in OFW its not working. My switch is completely off like no power the only way to turn it on is to reset the chip. Any fix to that?
Thank you for another great video! I have a question, I have an OLED chip I bought about 6 months ago but haven't go around to installing it in to my Switch yet, what is the best/most recent method & firmware to update the chip to before the install? My Switch OLED is on the latest OFW as I've been using it to play store bought games. Thank you for any advice.
@@sthetixofficial thanks for the reply, yeah fully aware how hard it is, I've done a few already 😊 That's not what I meant though, what I'm talking about is upgrading the modchip firmware before Installation as my chip is at least 6 months old just wondering what the best, most stable firmware version is for the chip and if the upgrade method has changed over time etc?
Yes correct. Unless you want to add a Semi-Stock option under the launch menu. You can download u.pcloud.link/publink/show?code=XZezT00Zf80pWAGh49VzwJncVQqbRJCPx6ok and extract it to your SD card.
Hi, I have a v1 switch, I follow every step, but I got a problem, at the stage of restart into OFW I got 3 buttons, OFW(gray)-RCM-Cancel, I can't press the OFW button. I have your latest HATS and my console is at 17.0.1 firmware. What should I do?
Bang, saya sblmnya pake sx os, fw sysnand masih di 11.0.0, switch v.1 unpatched, pake rcm loader Rencana mau pake sd card baru pindah ke atmos, brrti tinggal ikutin cara di video ini aja ya? Krna saya pake rcm loader brrti ganti ke lampu warna biru ya sblm inject? Payload di dalam rcm loadernya perlu diupdate terbaru atau tinggal pake aja? Plis dijawab ya bang sthetix... 🙏
thanks for the detailed tutorial, but I have question about emunand's internal storage. Is the 12GB raw partition makes 9.3GB usable space for internal storage? I am worried if I its because i have installed games in sysnand. thanks in advance!
Hey! I recently purchased a mod chip to modify my switch OLED. Is there anything I need to do to the actual mod chip? I saw a video that said you have to flash the mod chip if no software is installed. But other videos I have seen don't mention anything about this so I am a little confused. Thank you
Setting up like this has NOGC enabled in HEKATE by default. Do you have any videos or information on NOGC? Cartridges won’t run with it enabled and I can’t really find much about whether I can safely disable it or not.
Doing this on a switch v1, with a new microsd card. Do i need to format it to fat32 first before copying the hats files? Also what payload to i inject to get into the hakate menu, the hekate ctaer one?
@@sthetixofficial thanks, already finished the setup yesterday, it went very smoothly, thanks for the hats package. don't even know why i was so nervous, the entire process was very easy :D
Fuse on the switch is not like a house fuse. It protects the console from being downgraded to a lower firmware. And the fuse count should match the firmware version. You can read the table here switchbrew.org/wiki/Fuses
Hey recent purchase just got my switch in today switch looks great and going to be leaving a review very soon. I just am noticing 1 thing I can't find prod.keys in the switch folder
@@sthetixofficial My apologies I figured that out shortly after making the comment. Didn't realize I missed a step switch has been great. Just trying to get the applet version of tinfoil working. Don't have a cart so following your tutorial now 😁
@@sthetixofficial Hey I'm really struggling to get a nsp file installed through DBI game updates work but base games give a "cannot write to placeholder error" any idea what I'm doing wrong here? Would really appreciate the help
3:41 what a shame i did exactly that but now my storage is too full :( Since Just Dance 2023 stores over 4 GB on the "Savedata" memory, which seems to be placed exactly on this tiny 12GB place, theres only 100MB now left. Do you know how I can resize this 12GB partition to a larger one? I dont want to setup the card once again :/
you can try to resize the emummc using the nxnandmanager but you need to set it up again. So the best route will be dumping the current emummc and then make a new emummc and restore the data inside the user partition one by one using the nxnandmanager. It is technical but ..it may work. I need to try it first here.
what if we have a freshly chipped V1 switch? is there a guide on how to prepare that type of console? or are the steps here identical in that process? :)
After partitioning and creating and emuMMC the 12gb partition says its currupt any time its connected to the computer. Any suggestions? the switch root is fine itself but the partition is not.
Hi i did everything following the guide and downloaded latest HATS pack for 19.0.1, on first launch into emuMMC it worked but after putting switch to sleep, next day it only shows black screen. I can boot into hekate but trying to launch anything after, even OFW only leads to black screen.
I created a nand backup after this started happening, if worse comes to worse and i have to do fresh install would that be all good even if i did the backup after the black screen started occurring?
@ i attempted that and it still black screens, when i try to run it from the fusee payload it just stays stuck on atmosphere logo, would this be a hardware issue which is odd cause it worked before and then next day just stopped. if anything i might try and take this to a repair shop
Hi wonderful guide by the way. I have a question. From where I can get the new 3 files. atmosphere - bootloader - config I hope you to answer my question as soon as you could My console update is 16.0.3 if you want to know
it's been yrs since i messed with this. I'm using the rmcloader to get onto my friend's switch, but when I use the loader it goes straight to the main switch screen (I know it works base on seeing the files in album) instead of the screen that has Launch, More Configs, Payload, emuMMC (hekate screen?). With the new files did it auto make a CFW? How can i get to the Hekate screen? Need to get there to make his emuMMC.
you better remove the atmosphere, bootloader, config folder, and extract my pack, sthetix.info/hats-releases you can set the autoboot later inside hekate later.
I never setup the emuMMC on my switch, i've just been using it via CFW. I was going to try up grading my sd card from 400g to 1tb but thought I should maybe back up the nand and create emuMMC also. Then run is on emuMMC going forward. Is it possible to this on the old sd card or should i start fresh with new sd card and try to copy files over? The old sd card is exfat. Thnx
creating the emummc is more or less the same as creating the backup of the console's nand . although it is cropped, but you got the prodinfo which is the soul of the console.
Hello maybe someone can help me, when I boot emummc I get a red text saying error while loading fss0: atmosphere/package3 wrong ini cfg or missing/corrupt files failed to launch hos What do I need to do? Thanks in advance
From the last 2 months I was able to understand most of the things from the scratch. Updated my modchip, installed it, handled all things on Hekate, etc., Thank you so much for your guides.
you are welcome
@@sthetixofficial I just modded my switch my has the butterfly looking logo with no sd says do I follow the same guide
yes you can follow the same guide
@@sthetixofficial got it already man thanks so much what app u recommend to download free news games best hb app
@@sthetixofficialwould you ever make a updated guide or does this still work?
for many months I've been watching your guides but just now I got my switch modded and can make use of all of the information you've made available. Many thanks.
you are welcome
such a wonderful guide, no slow talking and very clear
Glad it helped!
Thank you for the many guides and resources.
Glad you like them! and thank you for your support .
Brother I hardly if ever comment on UA-cam videos. But your video helped me in many ways.
Glad it helped
This video made it super simple for me to setup with 0 experience! Thanks so much!
You are welcome.
I love this guy cuz he can help when we got problems on consoles ❤️
Amazing video. Just received your OLED modded console and managed to follow these steps easily :)
An absolute legend. Thank you so much for this!
i have searched far and wide for your channel bro i was searching for strix or sthix hehe.
Thank you for this amazing guide and for the hats pack. I've used this multiple times already.
Is amazing how we can use the OFW and CFW in the same console.
Thank you so much for this wonderful guide. It has everything included that one needs to complete the setup.
Glad it helped
Quality guide 👏
Thanks bro.
10 -10 rating
I love how both the title and thumbnail has no Nintendo Switch on it.
Thanks!
Welcome!
Thanks bro 👊 had a nightmare before finding the right video!
Glad I could help
Just got my switch modded. Thank you for this very easy guide 👍
No problem 👍
Guide terbaik untuk beginner
thank you. i was getting frustrated trying to make sure every version of everything matched
Amazing guide!!! Worked for me flawlessly even in 2024.
Also, after the backup, can we delete it from the SD card?
u can
Would love to get a hacked switch OLED
thank you so much this video still works switch is fully set up now. so can i just start using gold leaf no problem now
I have created the emuMMC but when I boot in OFW, It always says I need to format it. Do I need to remove the SD card always after booting into OFW?
check your SD card format, is it either fat32 or exfat?
After copying the backup to my computer, can i just delete the backup from my sd card?
update for this?
@JoshuaValdez-m3m Yes u can
@@shaheerwaqar1577 even the prod key sir?
Excellent video! Appreciated.
Glad it was helpful!
help, when I launch EmuMMC it said Error while loading Fss0 atmosphere/package3 wrong ini cfg or missing/corrupt files failed to launch HOS
delete the atmosphere / bootloader / config from your sd card and extract my pack.
*Man, ur guides are lifesavers & supa' precise! ! !~* kudos to U good sir :) btw, where are you from?
I am in Indonesia :)
with the serial number blocker you mentioned at 5:28, is that a foolproof way of preventing a console ban?
exosphere.ini will protect your console from accidental ban, but in the end you should have awareness
Followed the guide did everything step by step and when I try to launch emummc I just get a black screen. Any help?
Great guide, but I have a question regarding a banned v1 Switch. What steps would be unnecessary if the system is already banned? Is there any point in setting up the emuMMC partition at that point?
setting up the emummc is pointless if your console is banned.
just to make sure, the micro SD card have to be formated in fat32?
no. you can use exfat or fat32.
Very useful and only real youtuber
Remember to set your EmuMMC partition size to 29GB as of Firmware 18.0.1
How?
@@YodaddylolornahIn the Partition Manager, instead of moving the Red Slider (emuMMC) to 12 GiB, move it to 29 GiB. 3:40
@@grahamcracker-incwhy so? Is there any issue with partition size? On OLED do we need to do 64GB?
I have a modded OLED switch. I just want to learn how to modd my new SD card for it. Where exactly in the video explains how to do this?
My switch wont boot to hekate.
I was updating my HATS but forgot to delete the three folders (bootloader, atmosphere, config). I had already pasted/replaced all the files on the SD card before deleting those folders. Now, I am encountering this error:
“Missing LP0 (sleep) lib!”
“Update bootloader folder!”
Kindly help. please
re extract the new pack please.
@@sthetixofficial already tried that but it won’t work
it could be the sdcard connector is damaged
@@sthetixofficial i’ve replaced the sd card reader with a new one but still wont work.
I also observed that it wont boot to original firmware by clicking the volume up and down at the same time on the bee screen. It shows blue screen after clicking the volume buttons.
It is not the SD card slot bro, but the SD card connector to the motherboard.
😂 i literally stumbled onto this video cuz the thumbnail said "console" and i wanted to know what console
Does the SD Card have to be Fat32 before doing this tutorial? I think mine was exFat but it kinds shows Fat32 now. Does Hekate do this automatically?
Thanks
No, it automatically converts the sd card to fat32 after you setup the emummc
"the console"
He can't say anything else or The Business can take down the video for copyright infringement. In reality they want to censor this content and use copyright as a scapegoat.
@@nickwaters2802 i did get it lol.
➡️ Nintendo Switch mod ⬅️
for anyone intrested first update ofm to 17.0.1 then solder chip in my case picofly then hats pack and ure done works for me
Does the micro sd card need formatted first in fat32? If so any software recommendations for this? Thanks
I received a "failed to launch HOS! Message. Unknown package version. HOS version not supported!Or emuMMC corrupt!
Anyone know how to fix this? I'm so frustrated as this is my third attempt arriving at this outcome. Any help is appreciated ❤️
Re extract my pack.
Just boots to a black screen when i run emuMMC. Followed the steps exactly on a fresh install.
I’m getting the same issue.. did you find the solution?
try redoing the guide.. is your sysmmc working?
@@sthetixofficial Issue ended up being related to some files being corrupted. Wiped everything clean and then redownloaded everything with a download manager and it all worked fine
is this still usefull for 17.0.1 fw? also i read something about sd data being better than partition, what do you think?
it does. and sd partition is better
When i try to lanch EMUMMC it says failed to match warmboot with fuses ! If you continue, sleep won’t work ! And I get the same message also when booting SYSMMC ( stock )
You need to ignore the message by pressing the power button and update your console later using Daybreak.
Why do you set up emunand with 12 gb when I’ve seen other’s do it with more? I’m kindd new to this and I just bought my picofly. I’m just trying to figure out what to do. Thanks.
because others always follow but dont know the essentials, please read this x.com/sthetixofficial/status/1703197594279923972?s=20
@@sthetixofficialawesome. Thanks
Thanks for this video, I installed a modchip yesterday and was lost, almost messed up with another video that wasnt showing how to setup emummc.
Dude you are nailing every video. I am new to jailbreak scene and your video are my go-to video guides. Anyway do you have a video or link about a guide on how to transfer save file from ofw/sysnand to emunand?
Hi, yes you can watch my jksv video.
What happens when you do a 3DS system transfer like ‘Modded 3DS ➡️ None-Modded 3ds’. Can you make a video seeing what happen?
@sthetixofficial
Awesome video, very easy to follow, just wanted to ask,
Do I need to keep the backup dumped files on the sd in the switch after copying them to my pc,
or can I delete them to save up some memory as 60gb is alot to keep on there If it doesn't need to be on there.
Thanks in advance
You can move it to your PC.
I am very grateful for everything you do. I have a question. is it possible to use 2 SD cards, for example on one you have the provisions of the game, on the other others and just change them like that? Greetings
I would like to to the same too. I’m assuming just insert the 2nd sd card. When the no payload screen shows up just press vol - and vol + simultaneously to boot into OFW.
did u get the answer?
Thanks for the guide, can you please explain why it needs 12GB when creating emulation mmc partition?
x.com/sthetixofficial/status/1703197594279923972?s=20
Thanks, man. Does your HATS pack enable incognito, or do I have to set that up?
it does via the exosphere.ini
@@sthetixofficialawesome. Thanks!
Please, could you put the last version of atmosphere and hekate in the hatpack for people who update their system.
t.me/HATSPACK
ive been trying to set up my modded lite with this method, but there was no combo release on the HATS github page- on emuNAND launch, i just get an error that says 'unknown pkg1 version' like twice.
i'm doing it from a fresh microsd and using the exact same method as in the video
you need to re extract the package.
@@sthetixofficial re-extract it? i've done that but it hasn't changed anything :(
(the guide is great btw, just having trouble with something weird)
do you have a fix ? im stuck here also@@biteybeast
Just did this on my V1 following all the steps and worked flawless! I will upgrade the sd card in the future, I just need to copy/paste everything to the new card, right?
yes correct.
Do you need to block Nintendo servers or does the hats pack do that?
the pack automatically does that.
Hi, ive followed everything with your latest HATS pack 1.71-5 through tele. I've successfully boot to Emummc once and got error message on sysmmc. Now i couldn't boot to both sysmmc or emummc.
what did u do?
@@sthetixofficial i’ve followed your tutorial, got error code 2168-0001 when launching emummc or sysmmc
For anyone having this problem, Ive fixed it by deleting file “420000000007E51A” in atmosphere/contents in the sd card.
you need to do the fix archive bit instead of deleting the file. or use the updated hats pack.
Hi, i'm currently trying to migrate my old Switch with SXOS still installed on it, is it possible to use this guide to migrate ? Also im using the older unpatched Switch V1 that still request payload to boot the CFW.
TIA
You can.
do we delete the prod.key file from the sd card after moving? or can we keep it there
you can keep it there.
Hi can someone here please help me. When I try to open it in OFW its not working. My switch is completely off like no power the only way to turn it on is to reset the chip. Any fix to that?
Please update the console using daybreak to the latest version after getting to the sysmmc CFW
Thank you for another great video! I have a question, I have an OLED chip I bought about 6 months ago but haven't go around to installing it in to my Switch yet, what is the best/most recent method & firmware to update the chip to before the install? My Switch OLED is on the latest OFW as I've been using it to play store bought games. Thank you for any advice.
It is hard to install it. You can watch how I installed it on my website or on odysee.com/@sthetixofficial:9
@@sthetixofficial thanks for the reply, yeah fully aware how hard it is, I've done a few already 😊 That's not what I meant though, what I'm talking about is upgrading the modchip firmware before Installation as my chip is at least 6 months old just wondering what the best, most stable firmware version is for the chip and if the upgrade method has changed over time etc?
you can disassemble the console, get the USB cable and install the latest hwfly-nx bootloader and firmware to the chip.
In order to play online games like fortnite should we be rebooting into OFW to do so?
Yes correct.
Unless you want to add a Semi-Stock option under the launch menu. You can download u.pcloud.link/publink/show?code=XZezT00Zf80pWAGh49VzwJncVQqbRJCPx6ok
and extract it to your SD card.
do I just put it into the root folder of the sd card? Thank you!! @@sthetixofficial
yes
Hi, I have a v1 switch, I follow every step, but I got a problem, at the stage of restart into OFW I got 3 buttons, OFW(gray)-RCM-Cancel, I can't press the OFW button. I have your latest HATS and my console is at 17.0.1 firmware. What should I do?
You need to disable the AutoRCM to enable the OFW function.
Bang, saya sblmnya pake sx os, fw sysnand masih di 11.0.0, switch v.1 unpatched, pake rcm loader
Rencana mau pake sd card baru pindah ke atmos, brrti tinggal ikutin cara di video ini aja ya?
Krna saya pake rcm loader brrti ganti ke lampu warna biru ya sblm inject? Payload di dalam rcm loadernya perlu diupdate terbaru atau tinggal pake aja?
Plis dijawab ya bang sthetix... 🙏
Pake yg merah di rcmloader juga bisa asal pake hats github.com/sthetix/HATS
One question, does this method and files work for the recent v18?
you can.
When I go to the homebrew channel on my Wii and press BootMii, I get a black screen. Do you know why?
because you dont have the bootmii files, try reinstalling it using the modmii installer
@@sthetixofficial thanks
Thanks. Worked for me
I thought for emunand to full partion? Or is 12 GB enough ? I have 512 gb sd card that‘s why i‘am asking
you can read my article x.com/sthetixofficial/status/1703197594279923972?s=20
thanks for the detailed tutorial, but I have question about emunand's internal storage. Is the 12GB raw partition makes 9.3GB usable space for internal storage? I am worried if I its because i have installed games in sysnand. thanks in advance!
We usually install games on the sdcard, not to the emunand's nand section
Hey! I recently purchased a mod chip to modify my switch OLED. Is there anything I need to do to the actual mod chip? I saw a video that said you have to flash the mod chip if no software is installed. But other videos I have seen don't mention anything about this so I am a little confused. Thank you
Setting up like this has NOGC enabled in HEKATE by default. Do you have any videos or information on NOGC? Cartridges won’t run with it enabled and I can’t really find much about whether I can safely disable it or not.
NOGC = no game card.
i dont have any video for that, but you need to ask Hekate on github
hello boss. can we delete backup folder from sd card after save it on pc?
Yes u can
@@sthetixofficial okay thanks 😊👌
Can you please tell me how you removed the stock launch icon?
Thankyou
should not bro, you can't live without it
Doing this on a switch v1, with a new microsd card. Do i need to format it to fat32 first before copying the hats files? Also what payload to i inject to get into the hakate menu, the hekate ctaer one?
no need. hekate will automatically format the card as fat32 after you create the emummc
@@sthetixofficial thanks, already finished the setup yesterday, it went very smoothly, thanks for the hats package. don't even know why i was so nervous, the entire process was very easy :D
You are welcome
Can you give a reference or explain the fuse count? And is it any bad effect if it being bypassed?
Fuse on the switch is not like a house fuse. It protects the console from being downgraded to a lower firmware. And the fuse count should match the firmware version. You can read the table here switchbrew.org/wiki/Fuses
well. if nintendo sees your Joy-Con serial number. they know the main unit serial number aswell probaly. but i dont think that matters
Hey recent purchase just got my switch in today switch looks great and going to be leaving a review very soon. I just am noticing 1 thing I can't find prod.keys in the switch folder
you need to get the prod.keys with the lockpickrcm payload
@@sthetixofficial My apologies I figured that out shortly after making the comment. Didn't realize I missed a step switch has been great. Just trying to get the applet version of tinfoil working. Don't have a cart so following your tutorial now 😁
@@sthetixofficial Hey I'm really struggling to get a nsp file installed through DBI game updates work but base games give a "cannot write to placeholder error" any idea what I'm doing wrong here? Would really appreciate the help
usually you need to update the console firmware
So you imply that using SysMMC and utilizing homebrew apps like Nueman to get your saves from EMUMMC to your stock NAND it won't get you banned?
Can I use my existing Switch Lite modded SD card (which is already setup) on my new OLED modded or do I need to setup everything from scratch?
no, you need to set it up again from scratch.
what sd card file format to use?
can i update ofw to latest fw and will athmospere be updated as well?
thank you for this video!
exfat or fat32 is fine.
yes you can update the fw to the latest version.
If we alocate more space for emuMMC raw partition, does it help or change anything?
you can set it to your liking but you need to read this article x.com/sthetixofficial/status/1703197594279923972
3:41 what a shame i did exactly that but now my storage is too full :( Since Just Dance 2023 stores over 4 GB on the "Savedata" memory, which seems to be placed exactly on this tiny 12GB place, theres only 100MB now left. Do you know how I can resize this 12GB partition to a larger one? I dont want to setup the card once again :/
you can try to resize the emummc using the nxnandmanager but you need to set it up again. So the best route will be dumping the current emummc and then make a new emummc and restore the data inside the user partition one by one using the nxnandmanager. It is technical but ..it may work. I need to try it first here.
Hey do you have a Video that explain how to set up the switch when you want to sale it ?
How to setup android and emmummc partition at the same time?
what if we have a freshly chipped V1 switch? is there a guide on how to prepare that type of console? or are the steps here identical in that process? :)
it is identical.
@@sthetixofficial thank you!!!!!! 🫡
After partitioning and creating and emuMMC the 12gb partition says its currupt any time its connected to the computer. Any suggestions? the switch root is fine itself but the partition is not.
try using other sd card as a comparison.
I was wondering how to boot OFW after installing a mod chip, thanks for this video
it is here : ua-cam.com/video/up_sjzKHFeU/v-deo.html
I'm on V1 unpatched can I use this pack to update, thanks
you can, most of it are the same.
Hi i did everything following the guide and downloaded latest HATS pack for 19.0.1, on first launch into emuMMC it worked but after putting switch to sleep, next day it only shows black screen. I can boot into hekate but trying to launch anything after, even OFW only leads to black screen.
I created a nand backup after this started happening, if worse comes to worse and i have to do fresh install would that be all good even if i did the backup after the black screen started occurring?
try to replace the SD card.
@ i attempted that and it still black screens, when i try to run it from the fusee payload it just stays stuck on atmosphere logo, would this be a hardware issue which is odd cause it worked before and then next day just stopped. if anything i might try and take this to a repair shop
Hi wonderful guide by the way. I have a question. From where I can get the new 3 files. atmosphere - bootloader - config
I hope you to answer my question as soon as you could
My console update is 16.0.3 if you want to know
it is github.com/sthetix/HATS/releases
I am getting a 1.5tb MicroSD, should the emuMMC still be only 12GiB......does it matter?
well it depends, Do you need to use the 64GB internal memory for the emuMMC ?
@@sthetixofficial i’m new to this, so really don’t know.
should i also worry about fuse counts? or is this really that straightforward?
we dont need to think about the fuse count.
May I ask if the hats pack provided here is the latest?
yes
question for the backup, does it consume space from sd card and console? If it does, can I delete it to free some space?
it does. you can move it to your computer if needed.
it's been yrs since i messed with this. I'm using the rmcloader to get onto my friend's switch, but when I use the loader it goes straight to the main switch screen (I know it works base on seeing the files in album) instead of the screen that has Launch, More Configs, Payload, emuMMC (hekate screen?). With the new files did it auto make a CFW? How can i get to the Hekate screen? Need to get there to make his emuMMC.
you better remove the atmosphere, bootloader, config folder, and extract my pack, sthetix.info/hats-releases
you can set the autoboot later inside hekate later.
I never setup the emuMMC on my switch, i've just been using it via CFW. I was going to try up grading my sd card from 400g to 1tb but thought I should maybe back up the nand and create emuMMC also. Then run is on emuMMC going forward. Is it possible to this on the old sd card or should i start fresh with new sd card and try to copy files over? The old sd card is exfat.
Thnx
You better start from scratch. easier
@@sthetixofficial thank you 🙏
I thought you’re supposed to do the backup first before anything else?
creating the emummc is more or less the same as creating the backup of the console's nand . although it is cropped, but you got the prodinfo which is the soul of the console.
Is DNS-MITM in the HATS PACK ?
it does.
@@sthetixofficial Great !
Hello maybe someone can help me,
when I boot emummc I get a red text saying error while loading fss0: atmosphere/package3
wrong ini cfg or missing/corrupt files
failed to launch hos
What do I need to do?
Thanks in advance
replied on x