I would recommend adding a thin layer of anti seize between the hub of the rotor and the wheel spacer. This will prevent the brake rotor and wheel spacer from bonding to each other making it very hard to remove the wheel spacer when you need to service the brake rotors and pads. You can find anti seize at your local automotive retailer or at Walmart. You only need 1 tube but only apply a thin layer between the rotors and spacers.
The word you’re looking for on what side of the nut is the conical side. It sounds like you state 94 degrees not the 94 lb/ft for the torque. Good for you doing this yourself, and following the directions with the product. 👍
LOL!🤣 that goes to show I’m not versed on the mechanical lingo, I’m just a DYI guy, but I do take time to research and ask questions. Thanks for the clarification (I meant to say 94 lb 😂) and thanks for watching 👍😆
Great video. Beautiful truck. I just got a 23 BE and excited. Are the 1.5” spacers just cosmetic wider stance as mentioned? Curious what are the Red lens directly above the each exhaust tip? Great work
Thanks Dave! I’m sure you’ll enjoy the BE, great truck 👍, the spacers are for those who like a wider stance look, which is my reason for adding them. I think it makes it a little tougher looking. The red lens are the bumper reflectors. Enjoy your new truck and have fun modding it!
Not sure, I’ve seen others with the setup you mentioned and they don’t rub. I will be getting the same tire size soon so once I change out the tires I will do a follow up video. Thanks and have fun customizing your new truck 👍
Looks good. Like the way the trucks sits.
Thanks 👍
Very informative. I just ordered mine. Thank you.
Thanks! I’m glad it was of some help.
DAAAAAAMN! Those are some sick spacers
😎👍
Looks awesome! Great job
Thank you!
I would recommend adding a thin layer of anti seize between the hub of the rotor and the wheel spacer. This will prevent the brake rotor and wheel spacer from bonding to each other making it very hard to remove the wheel spacer when you need to service the brake rotors and pads. You can find anti seize at your local automotive retailer or at Walmart. You only need 1 tube but only apply a thin layer between the rotors and spacers.
The word you’re looking for on what side of the nut is the conical side. It sounds like you state 94 degrees not the 94 lb/ft for the torque. Good for you doing this yourself, and following the directions with the product. 👍
LOL!🤣 that goes to show I’m not versed on the mechanical lingo, I’m just a DYI guy, but I do take time to research and ask questions. Thanks for the clarification (I meant to say 94 lb 😂) and thanks for watching 👍😆
looks great,i just order mine for my rtle 22,hope not rubbing on 1.5
Thanks, no rubbing at all, you will love the look! Just the right touch 👍
Looks nice!
Thank you!
Great video. Beautiful truck. I just got a 23 BE and excited. Are the 1.5” spacers just cosmetic wider stance as mentioned? Curious what are the Red lens directly above the each exhaust tip? Great work
Thanks Dave! I’m sure you’ll enjoy the BE, great truck 👍, the spacers are for those who like a wider stance look, which is my reason for adding them. I think it makes it a little tougher looking. The red lens are the bumper reflectors. Enjoy your new truck and have fun modding it!
Will it rub if i dont have leveling kit at front?
If you have the stock size tires it will not rub.
Looks great!!! I’m looking to do this. Do you get any rub at full turn to either direction? And you said NO suspension lift, right?
Thanks! I have the 1.5” front level lift kit on it and no rubbing at all, but I still have the stock size tires on there.
Were you able to use stock lug nuts?
Looks good, but just an FYI, spacers will wear out the tires sooner as you are basically compromising the geometrical suspension of the vehicle.
Nice!
Be sure you re-torque the spacer anytime you have the wheel off.
Yes thank you! I did a re-torque after 5k miles. I’m due to check them again soon.
Did you have to do any customazation on those existing studs?
No, the kit comes with its own studs, it’s a complete “plug” n play setup
Will it rub on my 2022 ridgeline with 265/65r18 nittos tires i have a 1.5 leveling kit on front
Not sure, I’ve seen others with the setup you mentioned and they don’t rub. I will be getting the same tire size soon so once I change out the tires I will do a follow up video.
Thanks and have fun customizing your new truck 👍
Please let me know
What size and brand tires are you running?
I’m still running stock sport wheels 18” with the stock Firestone tires.
What are the pink things in the front air intakes?
Actually red, I added red pinstripe tape to the slots.
Rock/debris chips though....?
No issues so far, the wheels are barely sticking out past the mud guards.
Do you have the link where you got it?
Yes here it is… www.motorsport-tech.com/
Does this lift void any part of the original warranty?
I do not know, sorry I can’t help
@@jamesakaflcruzr4277 Thanks, will check with my local dealership.
My guess is that it'll void the basic 3 year warranty for your suspension. But probably not your powertrain.
Where did you buy it?
I bought them from Motorsport, www.motorsport-tech.com/bora.html
Thanks, Nice Video!
Not much difference 😂
why should this be 17+ mins? 🥱