How-To Remove Allison 1000 Transmission
Вставка
- Опубліковано 29 гру 2015
- Here is a short run thru of how to remove an Allison 1000 5-Speed transmission from a 2003 GMC Duramax. This process is the same for all 2001-2005 5-Speed trucks. While this process varies for 2005-present 6-Speed trucks.
Steps:
-Remove Starter, tie to frame rail
-Pull off fan (Unless you have a 36mm box end wrench)
-Remove torque converter bolts (x6)
-Remove rear drive shaft
-Remove front drive shaft
-Remove Transmission cross member
-Un-plug all T-case wiring
-Remove T-case breather
-Remove T-case
-Remove all Trans wiring
-Remove fuel line brackets
-Remove exhaust v-band
-Remove Trans cooler lines
-Remove all bell housing bolts
-Remove transmission
Music was provided by NoCopyrightSounds
Alan Walker - Fade [NCS Release]
Song - goo.gl/gRMuAi
Artist - goo.gl/vVlgHJ
Any background music is credited to its original owner.
Disclaimer - Some information in this video may be incorrect or not manufacturer recommended. I am not responsible for any problems or damage you encounter. Watch and follow this video at your own risk.
That techno music made the video kind of hard to watch.
One of the Best Videos I saw on removal! Great Job..THANKS!!!
Wow, such information, much helpfulness
Thanks for the awesome video!
Probably would have been a pretty good video if Helen Keller wasn't running the sound board :-p
Thanks for the video very informative. Any difference on a six speed Allison LBZ? Is the process generally the same?
what did u switch it with i know i need to do the same
Nice job.!
You know what I would say is the best video ever
Good information
Music is super distracting. Doubly so when you also have the music playing in the shop.
Brakcets. Diesel lines. Shift cable etc.... Could have been popped off, pushed back instead of removed. Faster install
nice video, sweet tunes playing too
what’s the cost for all this job?
Torque converter bolts should be 15mm head and the balancer bolt 32mm. That is what my 05 LLY is.
Love the video but very difficult to watch with the music.
How do you remove the casing behind the fly wheel? Mines cracked
This seems stupid to ask but is the transmission only being held up by the engine? Or is it attached to something else?
torque converter is 15mm bolts. nice video tho
Isnt there an access plug for the converter bolts? I know ford nd dodge usually have access plugs.