I hear you but since it's bone stock it should be fine. If he were to throw a turbo on it that would be a different story. Or if he's trying to sell this car, he better delete this video. Lol
I’m a hardcore ride or die Euro guy, and as a rule I despise Hondas but yours is so clean and well done that I can’t help but watch all these update videos. Keep up the good work man! You should polish your valve cover or maybe get it chromed. I think a little pop of shine right in the middle would make it perfect.
I just did the same to my 95 and painted the valve cover and timing cover and heat sheild and fuel filter holder while at it now waiting on the new motor to be installed so stoked!
Alot of people here saying "do this, do that to your car" your car, your canvas. It's the drivers enjoyment that matters. Not these other guys with the copy n paste builds.
Nice!! Very interesting video, not one word was said but kept my full attention until the end. Well done dude! As a side note though... the night before I came to your meet I cleaned my engine bay. 23 year old 300k mile Corolla. All I can say is your engine bay was fairily clean compared to what was in mine hahaha
I thought of leaving the video as soon as I saw you drying the car with that sponge foam thing instead of micro fibre cloth! But I came for the engine and you did a pretty good job with it
You did this all out of order. You should have started under the hood, then the engine components, and then the outside of the car. You just dirtied everything you had previously washed.
Just something to think about. Try gojoe or some type of pumice scrub and a bristle brush. Doesn't etch the block or head. Cuts grease good. Armorall is good for hoses and stuff. Just get the left over grease off. Dust sticks to it like crazy
Love the channel and the work you do, but remember dont use a pressure washer on that Maaco paint job my blast it off . lol car looks good even if I'm a truck guy I love all vehicle well most of them.
Me, 95 Coupe DX. 360000 miles.I remove the battery and carefully clean it and the tray/ cable ends. I use 1 cup simple green / 1 cup Windex, 1/2 gal water mix in a spray bottle. Pretty much the same wet and soap and scrub technique, but using a hand held spray bottle with water. I also regrease the hood latch. Nice video.
I hate comments like these with a passion! Of course he can do whatever he wants with his possessions, that's not the point at all. The point is that it's butt ugly, and since his audience own their right to express themselves freely, we can also tell him that it is the case. We have as much right to complain, as he has to do whatever the f*uck he wants. And don't give me that shit "well why are you here watching then, if you don't like it leave" because I want to see shit get clean that's why! And I'm only complaining because of your stupid ass generic white knighting comment! Now good day to you sir! I SAID GOOD DAY!
No words needed, I love your attention to detail, you have a beautiful Honda as well. I'm not a big fan of the excessive negative camber though, but to each their own.
@@teshikofurusato4541 Late af reply but whatever. It's not the battery itself he's worried about, it's the electrical connections that have the possibility to short if water gets into them.
Good Job man!!! :) I have bought a lot of used vehicles and unless the engine bay is detailed I'm not even interested. I think its a sign of a person that cares about their car.
Did anyone notice he left the battery on while spraying water and other stuff on there ....good way to short things out and also a very amateur move good cleaning but a little foolish with the battery on
@@petrolmonkey1973 i mean A for effort but when someone labels "detailing" i expect too peep game this is a bad way and good example of how too fuck things up
@@Chris-dy1cb What do you expect? He didn't really detail the engine bay, all he really did was hose it down and spray some degreaser on it before spraying it down again. Go watch chrisfixs video on how to properly detail an engine bay.
I give him props on a good video, and definitely putting work into it, but I feel like he was showing you how to cover up problems instead of fixing the problem.
Great results with the engine bay! I really appreciated the attention to detail. Got me thinking about touching up areas some of those rusty areas on my own car.
Lol. But then he shouldn't have made multiple mistakes that Chrisfix points out: 1. He used high pressure water sprayer. That allows water to shoot into all the little nuts and grannies. 2. HE FLIPPING (Again, high pressure) WATER SPRAYS AN ENGINE BAY WITH A CONNECTES BATTERY!!! WHAT?! 3. Also when water spraying the engine bay, you should of course disconnect all the electrical wires and seal them so they don't get water in 'em either.
Thejs Venderby im a detailer with 2 years experience at a high volume shop. Every detailer I have ever worked with, from 1 year experience to 15 years experience, they all use a pressure washer to clean engine bays. Me included. To do it quickly and effectively, it's the only way to go. I also have literally sprayed a battery while connected and never had any ill effects happen, and I've detailed at least 500 cars. The only thing you need to watch out for is the intake, the fuse box and ECU. If you didn't know, most cars you can literally see the ground around the engine if you look down in an engine bay. Water shoots up on the engine, transmission, axles, everything when you drive in the rain and go through puddles. It's not as vulnerable as you think, it can handle water getting on it. Just not IN it.
Thanks to you I just bought a 4 door EG shell to build as my "dad car". Love this thing. Love my 5th gen prelude too. Just not enough room for the kids. It will be kept though 😁
It's called ridiculous camber and stretch fit tyres. Some people need to learn that car designers and manufacturers know a thing or two about handling and ride. This is hideously ugly and just plain wrong. No way is that going to drive properly.
Nice.... Just a tip... Next time run the motor for a few minutes.... The dregreaser works best on a warm block. Just have to be careful around the exhaust manifold or header... Sometimes the degreaser can ignite..that's more for the aerosol can type like engine bright.
A little pro tip is to use a damp microfiber instead of a shammy to dry off the car. That way guarantee no scratches from any left behind debris. It'll look like not fully dry but it does dry up nicely after a few minutes.
i dont want kids to learn anything from this its not how u do things unless ur looking into flipping cars i guess refreshing the engine bay would be more appropriate tittle than detailing it
Indeed, this muppet doesn't even know how electronics work, change to shower (that's genius), don't unhook battery (brilliant), start the car after washing the engine down (great!). I'm pretty sure one of the electronic components will go bad after a few weeks. The only thing he did right was cover the alternator and distributor.
Just a tip as I paint cars for a living you could get the color code and get that paint mixed for around 15 dollars and cheapo clear for under 35 in total paint and clear and itd look 1000x better, no hate just a tip
I use 409 and warm water with dish soap just like you clean your kitchen with and it works great. It doesn't fade the rubber and plastic like some stronger engine greasers do.
Careful with the tire foam a lot of those leave a oil behind that will attract and build up dust meaning you have to clean the bay more often so make sure you use a water based dressing
I have a 95, its not too dirty but man its age is showing. Any tips on how to take care of the rust? Theres a bunch, especially around the hardware. Not fun when youre trying to fix stuff.. Could i actually buy new hardware for it, is that a thing? Or just nab some from pull aparts..
What is it that you have to cover on the engine bay?? I'd love to do this, but I'm nervous I may ruin something. (New the car scene, sorry if it's a dumb question!)
Painting over rust will cause the paint to peel later. Use a rust catalyst to convert the rust after taking a wire brush to remove the larger deposits of oxidation. Otherwise, that was solid using the paint brush and cap.
Hey I also live in mass, I was wondering about having the license plate in the windshield. Have you had any issues with doing it? I just got a new car and only had a plate on the back up until I registered it and had no issues
![HOW TO: ENGINE WASH | #OMGMIATA | EP77 | [4K60]](/img/n.gif)
Very Creative. LOVE it!!
throtl thanks guys!!!
Happy birthday Evan!
@@diiviinemedia how much was your paint job?
@@diiviinemedia your motor is looking real good.
I realize I'm kinda randomly asking but do anyone know a good website to watch new tv shows online?
"Sprays battery"
Ha ha I was thinking the same thing 😂
Nothing happens. As long as you don’t flood the whole components. It’s perfectly fine.
@@rtroeun True.
AMSR. Actually really relaxing without the typical copyright free edm people put in these
Paint the valve cover!
lol #chrisfix
Jérôme Morin lol #beaterupper
Static Focus racer red👍🏽
Ap1 S2k *ricer red
Not teal pls no
Chrisfix here back at again with another asmr engine bay cleaning
joel kaplan 😂😂😂😂😂😂
joel kaplan *I thought of Chris Fix Too lmao*
joel kaplan yes so blissful 😴😊😌😌😌😌😌
Best comment
Jose Diaz asmr thanks 😂
Didn't even say a word. This was artistic and dope. Well done.
made me think of primitive technology but with a car, love it!
Nismo Jdm great reference!
Hit the rust spots with the wirebrush then use the paint match u got to fix it
Joey ToFlee the steel wire brush would be the best for that type😂 that shit almost rusty all the way through
I hear you but since it's bone stock it should be fine. If he were to throw a turbo on it that would be a different story. Or if he's trying to sell this car, he better delete this video. Lol
@@gsxrcast 🤣🤣🤣🤣🤣
Please disconnect the battery before spraying down the engine bay just for that extra safety
you don't have to cover it?
@@j0hnnykn0xv1lle ask the rain if the rain cares about the battery
@@majstealth i don't think my car battery has ever gotten rain on it directly, like hosing it down
@@j0hnnykn0xv1lle you should open the enginecover after you drove in the rain, you would be amazed how drenched all is
@@xboys_archive i am, but in what context?
I’m a hardcore ride or die Euro guy, and as a rule I despise Hondas but yours is so clean and well done that I can’t help but watch all these update videos. Keep up the good work man! You should polish your valve cover or maybe get it chromed. I think a little pop of shine right in the middle would make it perfect.
Appreciate it man thank you!
It's ok Honda do a Euro ;-)
Hardcore euro gay you mean.
Stop hating and just appreciate cars for what they are,
Aidan steel really clean car but couldnt drive it bc its an auto
I just did the same to my 95 and painted the valve cover and timing cover and heat sheild and fuel filter holder while at it now waiting on the new motor to be installed so stoked!
Your videos are always fresh. You clearly put in editing work and it shows. We appreciate you mike!!
YO!! No talking and STRAIGHT TO THE POINT love it !!!! 💯 keep up the good work bro
I think this channel is going to blow up because the dude is super down to earth and seems like a nice guy.
Dr Chemli he’s also a really good cinematographer and both his builds have been extremely well executed.
The car is also super down to earth :)
That made me giggle.
No annoying music or unnecessary talk. Love it ❤️... Nice car mate
Alot of people here saying "do this, do that to your car" your car, your canvas. It's the drivers enjoyment that matters. Not these other guys with the copy n paste builds.
This car is pretty copy and paste. There are so many lowered and over cambered civics exactly like this...
@@jacklawford6452 none this clean. The ones I've seen are usually sticker bombed with rust and dents.
Much improved. With all the shaved and tucked bays in the world... it is nice to see one just as Honda intended.
Ross Banner yoooooo haha
Nice!! Very interesting video, not one word was said but kept my full attention until the end. Well done dude!
As a side note though... the night before I came to your meet I cleaned my engine bay. 23 year old 300k mile Corolla. All I can say is your engine bay was fairily clean compared to what was in mine hahaha
Thank you! And she just broke 100k last month haha
Yeah haha still young, but looking mint ;)
Re (re) watching all your old Honda stuff waiting for the del sol content to start rolling now that you’ve got it back
Editing skills on point
Hova Mane Agreed. He’s underrated
I thought of leaving the video as soon as I saw you drying the car with that sponge foam thing instead of micro fibre cloth!
But I came for the engine and you did a pretty good job with it
You did this all out of order. You should have started under the hood, then the engine components, and then the outside of the car. You just dirtied everything you had previously washed.
Just something to think about. Try gojoe or some type of pumice scrub and a bristle brush. Doesn't etch the block or head. Cuts grease good. Armorall is good for hoses and stuff. Just get the left over grease off. Dust sticks to it like crazy
Love the channel and the work you do, but remember dont use a pressure washer on that Maaco paint job my blast it off . lol car looks good even if I'm a truck guy I love all vehicle well most of them.
Me, 95 Coupe DX. 360000 miles.I remove the battery and carefully clean it and the tray/ cable ends. I use 1 cup simple green / 1 cup Windex, 1/2 gal water mix in a spray bottle. Pretty much the same wet and soap and scrub technique, but using a hand held spray bottle with water. I also regrease the hood latch. Nice video.
This was super relaxing to watch for some reason lol never fail to impress with the camera angles brother 🤙🏽
I love the car man. It’s so nice. Makes me inspired for my sol
This is dope man. I love the vibe, the birds in the background, everything. Thanks for sharing!
All the camber ewwww
It's ugly asf that much serves no purpose
It's a ricers anyway
yeah but at the end of the day it’s his car and he can do it w/e he wants to it
I hate comments like these with a passion! Of course he can do whatever he wants with his possessions, that's not the point at all. The point is that it's butt ugly, and since his audience own their right to express themselves freely, we can also tell him that it is the case. We have as much right to complain, as he has to do whatever the f*uck he wants. And don't give me that shit "well why are you here watching then, if you don't like it leave" because I want to see shit get clean that's why! And I'm only complaining because of your stupid ass generic white knighting comment! Now good day to you sir! I SAID GOOD DAY!
dat camber sexxxyyy af
No words needed, I love your attention to detail, you have a beautiful Honda as well. I'm not a big fan of the excessive negative camber though, but to each their own.
Classified Info k
Will you ever paint the valve cover and heat shield and other things like that with high heat spray paint?
Feels like the car clean guru channel now. The asmr feels!
All that effort, but the thing that amazes me why wouldn’t you treat the rusty areas before you paint them, ???
Relaxing AF man. Wish I cared enough about the engine bay on my Mazda to so this...but that wouldn't be anywhere near as enjoyable as this video.
Dude the battery!
Water proof.
@@teshikofurusato4541 Late af reply but whatever. It's not the battery itself he's worried about, it's the electrical connections that have the possibility to short if water gets into them.
This is why I went all out and painted my entire engine bay and engine, Honda just looks so good when clean
Does bruce willis know you stole his battery?
Brian J duracell
Really appreciate the route you’re going with the car. Keep it up!
Purple power cleans my beamer motor up real nice
Travis Fike you mean it cleans the plastic on top of your motor lmao?
I have 10 gallons of purple power it’s the best. No need to buy anything else for the next 2 years
Why did you wash the car first then detail the engine bay? Also I would recommend to wash hood first so the dirt doesn't go down on engine
You shouldn't just cover up rust in the engine bay WILL lead to greater problems
Real Zangetsu yeah but by then the car will prob be in someone else’s hands
@@activeej8858 Yeah but rust can be a real bitch if it's not taken care of early, especially in 5-gen civics
Good Job man!!! :) I have bought a lot of used vehicles and unless the engine bay is detailed I'm not even interested. I think its a sign of a person that cares about their car.
Did anyone notice he left the battery on while spraying water and other stuff on there ....good way to short things out and also a very amateur move good cleaning but a little foolish with the battery on
I mean he did a pretty shitty job so that's to be expected
@@petrolmonkey1973 dude youre an asshole
@@petrolmonkey1973 i mean A for effort but when someone labels "detailing" i expect too peep game this is a bad way and good example of how too fuck things up
@@Chris-dy1cb What do you expect? He didn't really detail the engine bay, all he really did was hose it down and spray some degreaser on it before spraying it down again. Go watch chrisfixs video on how to properly detail an engine bay.
great job bro.... and the birds are chirping and singing to see you doing your job
Quick question, won't the soaps/foam/water damage the parts? I am afraid to clean my engine area T/T
Just make sure there's no power running through anything
I give him props on a good video, and definitely putting work into it, but I feel like he was showing you how to cover up problems instead of fixing the problem.
drop some likes for your boy always putting out dope videos!
plain and simple whats the intro song?
I still love this video so much. We need an updated version 😡
Heck yeah 🤙🏻
Love many detailing noises! Nice job you made there.
Intro song? Its really chill!
Great results with the engine bay! I really appreciated the attention to detail. Got me thinking about touching up areas some of those rusty areas on my own car.
Somebody watched Chrisfix lol
G35 GUY And didn't follow instructions
Did nothing like chrisfix
Lol. But then he shouldn't have made multiple mistakes that Chrisfix points out:
1. He used high pressure water sprayer. That allows water to shoot into all the little nuts and grannies.
2. HE FLIPPING (Again, high pressure) WATER SPRAYS AN ENGINE BAY WITH A CONNECTES BATTERY!!! WHAT?!
3. Also when water spraying the engine bay, you should of course disconnect all the electrical wires and seal them so they don't get water in 'em either.
Thejs Venderby im a detailer with 2 years experience at a high volume shop. Every detailer I have ever worked with, from 1 year experience to 15 years experience, they all use a pressure washer to clean engine bays. Me included. To do it quickly and effectively, it's the only way to go. I also have literally sprayed a battery while connected and never had any ill effects happen, and I've detailed at least 500 cars. The only thing you need to watch out for is the intake, the fuse box and ECU. If you didn't know, most cars you can literally see the ground around the engine if you look down in an engine bay. Water shoots up on the engine, transmission, axles, everything when you drive in the rain and go through puddles. It's not as vulnerable as you think, it can handle water getting on it. Just not IN it.
james baker ok. I'm convinced now. Thanks for the advice 🙂
Loved how you didn't put any music over it. Love hearing the raw sounds... like ASMR lmao
Whats the intro song anyone know ?
Ward
Still haven’t found out:(
Ayyy, it is Klimeks - Translucent
Finally
Best part about this video is that there was no talking. So Zen!
Rice Rice Baby
You rice bro
This video is relaxing cant explain why thumbs up!!
Goals
THE SMELL TO THAT CLEANER IS REALLY STRONG !!
360p Gang :( just means I get to watch it twice once it processes so I can wet myself again on 1080p!
Thanks to you I just bought a 4 door EG shell to build as my "dad car". Love this thing. Love my 5th gen prelude too. Just not enough room for the kids. It will be kept though 😁
polish the valve cover
Crx018 not worth it 😅 i used over 20+ hours on a bmw m30 cover 🙈
its a nice pass time, the end results are satisfying
Wrinkle paint would be easier
It's so cool u can see the clouds move through the reflection on the windshield.
Install a cold air intake and paint your valve cover
This was the most relaxing video
so fricking goood
rah wand
The ambient sounds were pretty rad, watched this eating tacos never felt more peaceful in ma life lol
Intro I saw 5 broken wheeled cars in a row. That explained the rest of the video that I didn't see.
It's called ridiculous camber and stretch fit tyres. Some people need to learn that car designers and manufacturers know a thing or two about handling and ride. This is hideously ugly and just plain wrong. No way is that going to drive properly.
This takes me back to the 90’s
During the cleaning, all I said was “SIR! THE BATTERY!! SIR, LISTEN HERE SIR...he is gonna blow up because he’s spraying the BATTERY WITH THE WATER.”
Spain ??? I used to spray my whole engine bay without covering anything and never had a single issue
Never covered anything when washing my engine, just turn the pressure washer to low pressure and avoid spraying directly into elektrikal components.
Fuck your stupid.
Nice.... Just a tip... Next time run the motor for a few minutes.... The dregreaser works best on a warm block. Just have to be careful around the exhaust manifold or header... Sometimes the degreaser can ignite..that's more for the aerosol can type like engine bright.
Bro you gotta use the foamy stuff
billy The aspiring gsx owner foam stuff is garbage. Doesnt do anything but make you look at something that you think is working.
A little pro tip is to use a damp microfiber instead of a shammy to dry off the car. That way guarantee no scratches from any left behind debris. It'll look like not fully dry but it does dry up nicely after a few minutes.
#notisquad firstlike =]
coupe looks siiiiiiiiiiiick.
nom nom
Imagine getting to live next to this guy and seeing his beautifully stanced creations almost daily 😍
well thats how u detail the engine if ur about to sell the car in couple of days
read description lol
why lol, im not hatin it just is what it is and u know it.
i dont want kids to learn anything from this its not how u do things unless ur looking into flipping cars
i guess refreshing the engine bay would be more appropriate tittle than detailing it
Indeed, this muppet doesn't even know how electronics work, change to shower (that's genius), don't unhook battery (brilliant), start the car after washing the engine down (great!). I'm pretty sure one of the electronic components will go bad after a few weeks. The only thing he did right was cover the alternator and distributor.
I walk away from cars with mint engine bays ... they are hiding something lol
Came out great the civic is straight fire bro. I love your style for cars so sick. Quickly becoming my favorite UA-camr keep it up.
Paint the valve cover, install some dc headers, cold air intake , all aluminum radiator ,msd ignition bits, aluminum oil cap and your set.
Just a tip as I paint cars for a living you could get the color code and get that paint mixed for around 15 dollars and cheapo clear for under 35 in total paint and clear and itd look 1000x better, no hate just a tip
Amd if you ever had rock chips youd have quite a bit of paint to cover that up
Your soundtrack deserves a round of applause. Well done.
literally started my morning with this (6am). made my day. thanks man
I use 409 and warm water with dish soap just like you clean your kitchen with and it works great. It doesn't fade the rubber and plastic like some stronger engine greasers do.
I really like that spray paint idea but maybe give the rusty bits a quick sanding before the paint makes it look that much better
Careful with the tire foam a lot of those leave a oil behind that will attract and build up dust meaning you have to clean the bay more often so make sure you use a water based dressing
Mike is the man! Miss my old coupe!
I have a 95, its not too dirty but man its age is showing. Any tips on how to take care of the rust? Theres a bunch, especially around the hardware. Not fun when youre trying to fix stuff.. Could i actually buy new hardware for it, is that a thing? Or just nab some from pull aparts..
What is it that you have to cover on the engine bay?? I'd love to do this, but I'm nervous I may ruin something. (New the car scene, sorry if it's a dumb question!)
loved the facts theres no talking. just straight up good content!
As an owner of a 96 ex this was satisfying to watch
Nice job. Fun to watch.
Probably would've skipped the dressing part . Great job man
Painting over rust will cause the paint to peel later. Use a rust catalyst to convert the rust after taking a wire brush to remove the larger deposits of oxidation. Otherwise, that was solid using the paint brush and cap.
Hate your delsol, but I have to give you credit because of the passion you have towards that style
Got another big one up and coming. Dude I have seen channels gain thousands of subscribers and I can tell you sir..... just keep at it.
This aged well lmao
Words can’t explain how much I love the intro!
Nothing I love more than people who take their time doing things the wrong way.
Hey I also live in mass, I was wondering about having the license plate in the windshield. Have you had any issues with doing it? I just got a new car and only had a plate on the back up until I registered it and had no issues
yessss! do more engine bay videos, tuck/deletes please
Cool video. Painting over rust is a bad temporary fix, you should use crc 5-56 or wd40 etc on the rust spots as temporary. :)